How to get Cisco Connect if I already own different Linksys products...

Hi,
how can I get a copy of Cisco Connect if I already own a different linksys product?
WRT610N
WET610N
DMA2200
Thanks,
John
Solved!
Go to Solution.

Cisco Connect is only available for the new router release.. like E1000,E2000,E3000, M10, M20. i hope this helps.

Similar Messages

How do I get Cisco Connect back?

I bought the Linsky E2000, and after I installed it Cisco Connect was installed too. Someone in my household uninstalled Cisco Connect so now my Linsky gaming adapter wont work so my laptop and PS3 can't go on the internet. How do I get Cisco Connect back?

I gave up on Cisco Connect the same way I did the stock E300 firmware, so it's now moot to me. The one thing I found with the Connect software was that if you make a change to the router setup from the web interface, Connect lis likely to no work anymore.
I was able to get it back a couple of times by changing the XML config file on *all* the machines. Most of the connect testing period, I wound up doing a 30-30-30 reset on the router and reconfiguring from scratch. No more, since I went to TomatoUSB.
FBIG a.k.a. BezantSoft
SOHO Network: E3000 TomatoUSB (1.28.7440 MIPSR2-Toastman E3000 USB Ext); WRT54G (Base Tomato 1.28.1816) as AP; Belkin 150 N+ Gbit Storage Router; HP [email protected] 64bHT W7(32bit)Ult & WinXP Virtual instance. HP [email protected], XPProSP3. IBM [email protected] XPProSP3. DIY P4 [email protected], W7Ult32. HP [email protected], XPProSP3, w 100M, 802.11G, builtins 1G PCMCIA & WUSB600N addon Nics. all running NM 5.5.9195.0-pure0.beta. Hawking PrtSrv 100M to USB. Offline: BEFW11S4, WRT54GC, ADSTech NAS 100Mx500Gb. Son took Xbox360 to college. {sniff!}

How to get database connection in applet

Hi,
I am trying to prepare database connection in applet. After preparing connection with database it'll read same values from table.
At the time of development it works fine. I have used esclipse IDE for coding and testing.
But when I try to call that applet from browser. It is giving ClassNotFound exception.
Does anybody know How to get database connection in applet ?
Please help me if anybody know solution for this.
Thanks,
Rajesh

As per my knowledge is conserned
1 u can get the database connection in a jsp page and u send the result set as param to the applet and u can use retrieved values as if they were of the same applet if u r interested i can send the db connetion coding for jsp my id [email protected]

Hey there! well i from india and i m facing problem connecting my debit card to the itune store ,as the very option is not there, can someone guide me how to get it connected , i have a mastercard debit card with me .please help me

hey there! well i from india and i m facing problem connecting my debit card to the itune store ,as the very option is not there, can someone guide me how to get it connected , i have a mastercard debit card with me .please help me

if you are signed in to iTunes with your AppleID, click on the AppleID > view account > payment information > enter in your information

I have just purchased Apple TV today everything works fine on my TV but I don't no how to get it connected to my ipad or I phone

I have just purchased Apple TV today everything works fine on my TV but I don't no how to get it connected to my ipad or I phone

Welcome to the Apple Community.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

How to get the document path of the pictures uploaded for products?

Hi Gurus,
How to get the document path of the pictures uploaded for products uploaded through tcode COMMPR01?
Many Thanks,
Neeraj

client path.
I need to get the client path in order to download files form server to client.
Best regards,
Huy.

How to get current connection from ejb container

We have to execute sql statement directly to the database and will use for this issue to connection establish between the ejb container and the database.
How to get the corresponding object ?

thanks

How to get internet connection from Airport Express to a PC?

I recently bought an Airport Express to get internet connection from my new MAC COMPUTER TO ANOTHER PC which is located in another room. For unknown reason, I could not get the other PC to work. Any idea how to fix it so that I can get internet connection for my PC? Many thanks for your expert assistance.

Currently, the Airport Express (not the Airport Express Extreme router) is acting as a base station via Ethernet to a cable modem.
I guess that it would be correct to assume that your new Mac can connect wirelessly to the AirPort Express base station, and access the Internet that way.
I am not sure if my 41/2 year old HP(Hewlect Packard) PC - (with AMD Athlon 64 3400 processor) which I am unable to get internet connection now is Wi-Fi capable.
You said "Prior to using the new Airport Express,I was using the Linksys wireless G router and have a wireless adapter sitting on top of my PC.". The wireless adapter would be Wi-Fi certified (they normally are). Is it a USB adapter? Please post back with the exact model.
Question: do I still need to use the adapter or not? Or the new Airport Express is enough to send internet signal to the PC?
A Wi-Fi adapter would act as a wireless network card for a PC, and should communicate wirelessly with an AirPort Express base station without a problem (providing that the chosen security/encryption is supported on both sides). Since the wireless adapter apparently was OK (with the Linksys router), you should be able to continue using it. Any other (built-in) wireless capability ought to be externally visible at the PC as a PCI card with an antenna.
Does the (Windows?) PC operating system detect any wireless networks? Is your AirPort Express on this list (even if you cannot connect or access the Internet)?
Jan

How to get (database) connections for building an extension in 11g?

Hi,
I have built an extension for jdeveloer/sqldeveloper and I used the ConnectionManager Class to start my dockable.
Having migrated from Jdev10g to 11g it looks like that the ConnectionManager class was removed, at least I'm
not able to locate it anymore.
I've provided the source code below, to show how I used to work with the class.
String connectionNames[] = ConnectionManager.getInstance().getConnectionNames();
DatabaseConnections.getInstance();
... Loop ...
if (i >= connectionNames.length)
break;
String name = connectionNames;
if (name.equals(dockableId))
... Start dockable...
What is the supported way to work with connections in 11g?
Best regards,
Ingo

Hi,
thanks for the quick response. Seems that my extension project in Jdev 10g was messed up by putting the new sqldevloper.jar in the class path. I've migrated to Jdev11g and the missing class is found.
Where I'm lost right now is the way to get a connection from the pool. Most of the classes that I used for that (oracle.jdeveloper.cm.dt.ConnectionNode, oracle.jdeveloper.cm.dt.DatabaseConnectionNode;)
are not longer existing and it looks like there is a new way to achieve this in Jdev11g.
Is there a documentation available somewhere, where the "new" strategy is explained?
Best reagards,
Ingo

How to get a connection from ejb container

How is it possible to get the connection used by the ejb container to execute some specific sql statement without establishing a new jdbc connection.

repost ... please help

Cannot get Cisco Connect to install or set up E1000 router

1. We have been using an E1000 router connected to our main Dell desktop (running XP SP3) to handle a small home network that includes wife's laptop which has card and kids' desktop with USB wireless adapter.
2. We purchased a new main desktop computer, ZT Systems running Windows 7. I am attempting to install Cisco Connect on this computer and set up the router. I reset it to factory specifications because I figured I'd have to start from step 1.
3. I cannot find the original setup CD that came with the router and I have no clue whatsoever what my password is.
4. So, I downloaded CiscoConnect.E1000.1.3.11069.2, the appropriate software to my desktop, and have been trying to install the software and configure the router, without any success whatsoever. When I plug it in, it asks me to connect the router which I do. It then will get to 25 percent of setup and stop, saying it couldn't be configured. At the same time, I have no Internet access, keeps telling me it's looking for networks when I actually am trying to set up a network.
5. I've tried the steps for configuring without the software, Windows still searches for a network and tells me it can't find one and I have no Internet access.
6. Can anyone tell me what's going on here, what I'm doing wrong, anything I'm missing? Do I need to just buy another router or what? Thanks in advance for any help.

Does your desktop have wireless? If so, switch it off and retry the installation. Make sure to reset the E1000 by holding the reset button for about 10 seconds.

How to get a connection which does not participate in the main usertransaction

          Hi All I am on WLS 6.1 sp2 on win2k. I have a requirement which is like this: I
          use connection pools/txdatasources/JTA in my application. Now when a JTA transaction
          (UserTransaction) is active - I want to take a connection from the pool and do
          some operation and commit it independently of the UserTransction commit/rollback.
          Its pretty much like this - 3 components A , B, C (none of them are EJBs) are
          involved in a UserTransactions and all of them access database via a TxDataSource
          (say TD) which points to a connectionpool (say CP). Now I want B to get a connection
          handle which is not participating in the main transaction - so that the operation
          that B does is independent of what happens to the main transaction. Now I know
          I can use TransactionManager api to suspend a UserTransaction and then let B take
          a connection from the pool and commit it and then resume the transaction. But
          is there any easier way out of it? Like if B uses a DataSource instead of a TXDataSource
          - will that give B a connection which is not part of the main transaction? if
          not then whats the difference between DataSource and TXDataSource? Any help is
          appreciated.
          thanks
          Anamitra


I would recommend that you mark the method as NotSupported or
          RequiresNew rather than using DataSource or suspending/resuming
          transactions on your own.
          If anything, it will be much clearer to the next person who maintains
          your code.
          -- Rob
          Anamitra wrote:
          > Hi All I am on WLS 6.1 sp2 on win2k. I have a requirement which is like this: I
          > use connection pools/txdatasources/JTA in my application. Now when a JTA transaction
          > (UserTransaction) is active - I want to take a connection from the pool and do
          > some operation and commit it independently of the UserTransction commit/rollback.
          >
          >
          >
          > Its pretty much like this - 3 components A , B, C (none of them are EJBs) are
          > involved in a UserTransactions and all of them access database via a TxDataSource
          > (say TD) which points to a connectionpool (say CP). Now I want B to get a connection
          > handle which is not participating in the main transaction - so that the operation
          > that B does is independent of what happens to the main transaction. Now I know
          > I can use TransactionManager api to suspend a UserTransaction and then let B take
          > a connection from the pool and commit it and then resume the transaction. But
          > is there any easier way out of it? Like if B uses a DataSource instead of a TXDataSource
          > - will that give B a connection which is not part of the main transaction? if
          > not then whats the difference between DataSource and TXDataSource? Any help is
          > appreciated.
          > thanks
          > Anamitra

How to get the connection name of a Dataprovider

Hi,
I have a report with stored procedure dataprovider.Now I need to write a VBA script to get the connection name of this dataprovider.Is it possible to get the connection name of dataprovider?
Thanks
Rakul.

What product are you using? Are you using Crystal Reports? Business Objects Enterprise? SAP product(s)? You sure you are asking in the correct forum?
Ludek

How to get datbase connection in Struts

I m not getting database connection while entering the data into database. can you provide any help for that please its very urgent

[Click here|http://catb.org/~esr/faqs/smart-questions.html#urgent]
db

How do I install a program I already own.?

How so I get program I already own that is on old broken computer?

http://prodesigntools.com/tag/ddl
Mylenium

How to get Cisco Connect if I already own different Linksys products...

Similar Messages

Maybe you are looking for