How to get contact list from a damaged nokia 6303

My mobile phone get some physical damage - the display was broken. Now he dont get on at all. I managed to get him connected to my computer.
After several repluggs of the data cable the computer finally found him. Now i have a connection to it, so it worked to copy files via total commander. Now i got (from the importatnt stuff, not counting music and photos i had stored on the phone) some files (a file without and  format with the name "qf" and a "rm443_conpack_conf.cnfp" ) and a folder (cities) with files in format .cdt and .cfg
i would like to save my contact list. Dont you everyone now, if any of this files is the contact list? and if yes, how do i get to open it?
tried nokia PC suite, but however it can find the phone, it still writes "connnected in a non-compatible mode" and nothing is displayed...
if someone knows, how to help me, thanks

you could try a few ways, not sure which will give best success:
Copy the contacts from 6233 to the SIM and then move the SIM to the new phone (assumes both phones are from same network operator or one of them is unlocked), then copy contacts back from SIM to N79
Install latest PC suite, backup 6233 to PC and then restore just the contacts data to the N79
Run the Switch application in the N79, it might be able to pull some content off your 6233
Send the contact as "business card" via bluetooth to the N79 (not sure if there is a 'select all' option in the 6233 contacts application.

Similar Messages

  • How do I get contact list from windows live to ipad

    I have no idea how to get contacts from other email accounts.
    How do you save email addresses that are sent to you?

    You can use a 3rd party app like Photo Transfer App.
    https://itunes.apple.com/sg/app/photo-transfer-app/id365152940?mt=8

  • How to transfer contact list from iphone 4 to 4s

    Appreciate advice  about transfering the contact list from iphone 4 to Iphone 4s.

    Just sync your contacts to the same address book or cloud service you're syncing them with on the old phone.

  • Any idea how I transfer contact list from a Samsung Tocco F480 (Orange network) to iPhone3Gs (O2 network)?

    Does anyone know how, or what app I need, to transfer the contact list on my old Samsung Tocco F480 (Orange network) to my new iPhone 3GS (O2 network)?  My laptop uses Vista.

    With Windows, the iPhone supports syncing contacts direct via the iTunes sync process with Outlook 2003, 2007, or 2010 along with syncing calendar events and notes, and with the address book app used by Windows Mail called Windows Contacts for syncing contacts only. Or you can sync contacts with a Google and Yahoo online address book.
    Get the contacts into a supported address book application on your computer or in your Google or Yahoo online address book if you have a Gmail or Yahoo email account.
    If the contacts are stored on the SIM card with your other phone which is limited to a name and a couple of phone numbers and maybe an email address, the iPhone supports importing contacts stored on a SIM card with another cell phone.

  • How to get contacts unlinked from old email and put onto iCloud

    I have an OLD hotmail account I haven't used in 10+ years that I was using as my Windows Live login when I had a Windows phone a few years ago. I linked it when I got my iPhone, and I think it became associated with a lot of my contacts. Now, I don't have the people's numbers saved in the Hotmail account, which has been deactivated due to inactivity (but I can still log in if I so desired) but those contacts are attached to that email address in my phone. There are about 50 of them and are all the important ones, my oldest friends and family etc. Lately I've been having issues with my phone and have either had to restore it or my contacts just disappear out of the blue, and every time I have to re-sync it with three different email addresses to get all my contacts. I really want to get the contacts unassociated with the Hotmail account and have them all together on my iCloud. It seems like it should be something fairly straightforward and simple, but I cannot figure it out. Any insight? Thanks in advance.

    To do this, do the following:
    Reactivate and sync the Hotmail contacts back to you phone.  Confirm that they appear in the Contacts app.
    Go to Settings>iCloud, turn Contacts to Off, choose Delete from My iDevice when prompted (any iCloud contacts will still be in iCloud).
    Download the app My Contacts Backup. Use the app to back up the remaining contacts on your phone (from Hotmail) as a vCard attachment to an email that you send to yourself.  Confirm that you have received the email.
    Go to Settings>iCloud and turn Contacts back to On.
    Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section), and set this to iCloud.
    Go to Settings>Mail,Contacts,Calendars…tap your Hotmail account and turn off contacts syncing with Hotmail.
    Open the My Contacts Backup email and tap the attachment to import the contacts from the other accounts back to your device, and to iCloud.
    Confirm that all your contacts are in iCloud, including your Hotmail contacts.  If so, you can delete the Hotmail account from your phone again.
    If you're having trouble with contact syncing, continue to use the app to make periodic backups of your contacts so you don't lose them.

  • When setting up iCloud for my Contacts, it wiped out my contact list from Outlook on my PC.  The contact list is on iCloud and on my iPad.  How do I get my contact list back on my PC?

    When setting up iCloud for my Contacts, it wiped out my contact list from my PC.  How do I get the contact list back in Outlook on my PC?

    It's in Outlook, in the iCloud account Contacts.

  • I recently lost my iPhone, how do i get my contact list from my last back up on iTunes into my android phone in the meantime before i get a new iPhone?

    My iPhone was recently stolen and i had all my contact phone number which i need quite urgently on the spare android phone am using in the in, how do i get my contact list from my last back up on iTunes into my android phone in the meantime before i get a new iPhone?

    Hi If you have them on your PC, just copy them and you will need to enter, each one on Android phone by typing, them in. Cheers Brian

  • I have a Verizon LG Versa cell phone, how do I get my contact list from there to my new iphone 4?

    I have a Verizon LG Versa cell phone, how do I get my contact list from there to my new iphone 4?

    Matt,
       My new iPhone 4 is on the way from Verizon, and I too am moving on from the LG Versa (a poor man's iPhone) so I've researched this.  I trust you have been using the backup assistant on the LG phone to backup your contacts?  If so, and you investigate the app store you will see an app for doing the same task on you new iPhone.  Initially it will take you LG contacts you have backed up at Verizon to their new home on the iPhone.
    According to user comments there appear to be a couple of issues with the app you need to be aware of:
       1.  It will not automatically backup your iPhone, you will need to initiate updates in the future on your own.  and
       2.  You will see in the comments, that there have been some issues with length of backup when you add lots of contact photos to your list.
       This coupled with the address book sync from your computer should make your list whole, in fact the move to the iPhone will allow me to consolidate my address book with my cell phone contacts.  Then once I remove the duplicates all will be right with the world.
    Steve

  • How can I get my contact list from my I phone 5 to my I pad?

    how can I get my contact list from my I phone 5 to my I pad air?

    One way is via iCloud. Settings > iClouds > Contacts on for both.

  • I've a new account on iMac.  When composing an email the contact list does not show up on the bar.  WWhen I start keying in a name, it comes up with the address.  How do I engage the  contact list from the email?

    I've a new account on iMac.  When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email.  When I start keying in a name in the email, it comes up with the person's address, which shows it is synced.  How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?

    With the New Message window open, go to the View menu and select "Customize Toolbar...".
    In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
    That item should be then added to the Toolbar for the New Message window.
    Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another.

  • How to get actual value from LOV list

    Like Subject says: How to get actual value from LOV list. Any help will be appreciated.
    Thanks.

    Thanks Shay, I did it with bind variable because I'm not using JSF. Is there any chance to post solution using standard JSTL or HTML expression. I have something like this: LOV displays some Companies names:
    <html:select property="UserJobCompanyId"
                             disabled="${!bindings[\'UserJobCompanyId\'].updateable}"
                             onchange="submitform();">
                  <html:optionsCollection label="prompt" value="index" property="UserJobCompanyId.displayData"/>                                                     
                </html:select>and I want to get CompanyID of selected Company.
    Thanks, again.

  • How to get the list of materials from Sap r/3

    Hi Experts,
    I have one doubt, here iam implementing
    HTTP TO RFC scenario.
    My doubts are------
    1. Should we create DT MT MI and all (OR) not
    2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).
    3.Or the second thing is how to get the list of materials start with some alphabate.
    Please reply me for each and every questions mentioned above. Please clarify me.
    Helpful answers wil be rewarded.
    Reagards
    khanna

    Hi Khanna,
    <i> 1. Should we create DT MT MI and all (OR) not</i>
        Yes U need to create for HTTP site...for RFC U need to import..
    <i>2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).</i>
        You create your own structres for Request and respoce.. and Map it with RFC..
    <i>3.Or the second thing is how to get the list of materials start with some alphabate.</i>
        I think it will come with acending order....
      for more help go through this link
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
    regards,
    Ansar.

  • HT1382 How can I copy over my contact list from my ipod touch 3 to my new ipod touch 5 ?

    How can I copy over my contact list from my ipod touch 3 to my new ipod touch 5 ??

    Sync it with iTunes on your computer.

  • How to transfer a contact list from a cd to the Iphone 4S

    How to transfer a contact list from a CD to the Iphone 4S?

    Import them from the CD to a supported contact application on your computer, then sync them to your phone.

  • How can I import my contact list from my pc to my ipad

    How can I import my contacts list from my pc to mu ipad?

    Have you received any replies?

Maybe you are looking for

  • ~ POWER PC APPLICATIONS NO LONGER SUPPORTED ~

    Hello there I am running on Mac OS X  v 10.8.2 I have a licenced copy of MS Office and have not had a problem using it, until a recent Mac 'update'! Since then, whenever I try to access it I get the following message: "You can't open the application

  • Urg : error look on bsp pages

    Hi i created two pages in web application with form . when launching or excuting application i got error "No complete domain statement contains the URLS (ECC60 instead of ECC60.").) how to solve this issue . could please suggest me . thanks , Suresh

  • My video shot at 16X9  came in to X as 4X3. How do I change it?

    I shot about 16 Hr of SD video in 16X9. And also shot some Vixia video in 1440 x1080.  Just downloaded Final Cut Pro X and all the SD video came in in 4X3 and looks squeezed.  How do I change the aspect of the Sd video.  The vixia came in fine as wid

  • Non PO Charges through EDI Incoming Invoice

    Hi I would be very thankful if somebody can answers these questions. I am designing EDI based invoice LIV. 1) Is it possible to post some charges in invoice which are without PO reference.Is it possible to post these kind of charges with EDI message

  • I can't click anything on the settings..

    Ok so I am trying to use my Dazzle Video capture device to stream video using a webcast system but the flash player settings wont allow me to click anything. I need to change the camera. I can right click and open settings but all the options are not