How to get count of transaction entries in SM58 including all the status

Hi,
How can we get the count of total number of transactions present in SM58.
Please help.
Regards,
Subbu

I don't think there is a direct way of doing that. However, you can try running the same query from the selection criteria of SM58 on the ARFCSSTATE table.
Try activating the SQL trace on ST05 (for your user), run the SM58 and click on "Execute". Stop the ST05 trace and display it. The same query performed by the transaction will be displayed there, allowing you to run it manually and check the number of records.

Similar Messages

  • How to get count of rows for a table?

    Hi,
    How to get count of rows for a table and secondly, how can i have access to a particular cell in a table?
    Regards,
    Devashish

    Hi Devashish,
    WdContext.node<Your_node_name>().size() will give you the no: of rows.
    This should be the node that is bound to the table's datasource property.
    WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value); will select the row at that particular index.
    You can access an attribute of a particular row as
    WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value).get<attribute_name>();
    Hope this helps,
    Best Regards,
    Nibu.
    Message was edited by: Nibu Wilson

  • How to get count,index and compare to arraylists

    hi
    how to get count,index and comparing of 2 arraylist.... plz suggest me asap...

    How is your question related to JDBC? And what have you done so far with your code?

  • TS4006 I was able to get a location on my stolen MBP but I didn't get the email notification in time to log into to iCloud to view the location, it is only viewable for 24 hours. Does anybody know how to get that info back? I've been on the phone w/Apple

    Hi,
    Does anyone know how to get in touch with iCloud support directly? All iCloud support roads lead to CPU tech support. My stolen MBP finally came online and gave a location but I didn't check my email for a couple days, was sick, and iCloud only displays location map for 24 hours. Desperatly trying to regain the location info. I live in a small town so location info might actually lead to the recovery of my baby.

    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem
    pinto123 wrote:
    i did every thing you said and when i went to restore this is what happened: the ipod software update server can not be contacted. make sure your network settings are correct and your network connection is active, or try again later. what do i do to restore.     i used the last way to do it the dfu

  • My mini died. bought one used from a friend... all of my songs and books are on my iPhone, and I cant figure out how to get them onto this new computer. this is frustrating. the things i really want are purchases I've made from itunes store... help

    My mini died. bought one used from a friend... all of my songs and books are on my iPhone, and I cant figure out how to get them onto this new computer. this is frustrating. the things i really want are purchases I've made from itunes store... help
    !!!!!

    Hey kevyg3,
    I was able to find an article that I believe will help you move your iTunes purchases from your iPhone over to your new computer:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/HT1848
    Hope this helps,
    David

  • HT1296 My drive failed on my iMac and I had to get a new drive but now my iTunes music is gone including all the CD's I added to iTunes, and all of my custom Playlists. All of that stuff is still on my iPhone 4, but how do I get it all onto my iMac again?

    My drive failed on my iMac and I had to get a new drive but now my iTunes music is gone including all the CD's I added to iTunes, and all of my custom Playlists. All of that stuff is still on my iPhone 4, but how do I get it all onto my iMac again? I have CD's on my phone that i no longer have the physical copies of so i can't just re-download them all, plus it would take forever! I just want to know if there is a way to get all of what is still on my phone, back over to my iMac with it's new drive and restore my full iTunes library to the iMac with playlists, CD downloaded music, and my iTunes bought stuff, so i can go back to synching the 2 devices without losing everything that's on my phone that used to be on both devices?

    iTunes Store- Transferring purchases from iOS device or iPod to a computer
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    How to dowload purchased music

  • I recently purchased songs from itunes via my pc and I dont know how to get them onto my iphone? When I click the sync button it says I will lose all the music currently on my iphone.. Help :(

    I recently purchased songs from itunes via my pc and I dont know how to get them onto my iphone? When I click the sync button it says I will lose all the music currently on my iphone.. Help

    If you're syncing with a different iTunes library than the one you previously synced with, then there is no way around it. You're gonna loose the old data. The only way round it would be to make sure that all the music files on your iPhone is also in your iTunes library. If you still have access to the computer with the old library, you could copy the files on to an external harddrive, and then import them into your new iTunes library.
    If it is in fact the same library, then the music currently on your iphone, is also in your itunes library. Just make sure that the artists/albums/playlists, or whatever you sync contains these tracks, that you allready have on your phone and don't want deleted. What i do is, i create a playlist specifically for my iPhone, and i set it up to only sync with this playlist. Whenever i hear a track from my iTunes library or buy a new track that i want on my phone, i just drag it to this playlist and next time i synchronize, it's there without deleting anything else.

  • Photoshop elements 10 will not migrate to my new macbook pro/retina display.  There is no CD/DVD player on this machine.  Any suggestions on how to get Elements onto my machine?  Yes, I have the disk(s).

    Photoshop elements 10 will not migrate to my new macbook pro/retina display.  There is no CD/DVD player on this machine.  Any suggestions on how to get Elements onto my machine?  Yes, I have the disk(s).  Am I going to have to buy an external CD/DVD player to load this one program:(

    I have ordered a USB3 BluRay/DVD/CD player/burner and will use that both with my iMac ( in which the Superdrive seems to be failing ) and the MBPro Retina I just bought .

  • TS2755 How do get my mail on my ipad 3 to set the same email rules as is on my imac ???

    How do get my mail on my ipad 3 to set the same email rules as is on my imac ???

    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

    My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    kevinpowell1 wrote:
    how can i get it out of recovery mode?
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    Some users have reported as many as 8 or 9 attempts were necessary before success.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    If the issue persists...
    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel.  My Basic panel should be below the Histogram.  Any ideas how to get it back.  I have even

    I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel.  My Basic panel should be below the Histogram.  Any ideas how to get it back.  I have even uninstalled my lightroom and reinstalled it with same issue.  Help!!!

    Right click on or near one of the other headers and a pop-up will appear and you will be able to select the Basic Panel for viewing.

  • My itunes store won't open. Any suggestions on how to get this to work? I've already downloaded the newest version of itunes. I'm also not sure what Mac operating system I have..

    My itunes store won't open. Any suggestions on how to get this to work? I've already downloaded the newest version of itunes. I'm also not sure what Mac operating system I have..

    To find the version of Mac OS X on your computer, all you have to do is click the Apple logo and then About this Mac. For more info, take a look at this doc -> Finding your OS X version and build information
    Do you see an error when you try to open the iTunes Store on your Mac?
    This Apple doc is a good place to start -> iTunes: Advanced iTunes Store troubleshooting

  • Sophos detected 3 threats on my iMac but clean up failed. Any idea how i get rid of them please? 1 is Malware the other 2 Trojans. Thanks

    Sophos detected 3 threats on my iMac (Maverick OSX 10.9.5) but clean up failed. Any idea how i get rid of them please? 1 is Malware the other 2 Trojans. Thanks

    Thanks for your interest CSound & sorry I couldn't get back sooner. These are the full details from Quarantine Manager:
    Date                    Threat                    Filename                                   Action Available
    2 Feb 2015      Troj/Zbot-Goy           notification - the_royal_ban          Clean up failed
    2 Feb 2015     Troj/Agent -AIRO     sale 2014-12-08_8704...                Clean up failed
    2 Feb 2015     Mal/Phish-A               e document..html                          Clean up failed
    I did have a look at a 'manual' for sophos but couldn't make sense of how to go about trying to rid something if the automatic detection / clean up process didn't work.
    Any ideas?
    Thanks

  • How do I get iMessage to activate, I have read through all the instructions but it still says activation unsuccessful?

    How do I get iMessage to activate, I have read through all the instructions but it still says activation unsuccessful?

    Are you using a supported carrier? Do you have a plan that permits text messaging?
    The iPhone uses a 'silent' SMS message exchange with Apple's servers in the UK to activate. If you are not using a supported carrier, and/or your account is not provisioned properly for an iPhone, the activation may not be able to complete.

  • How can I EXCLUDE particular folders/files from being included in the Lightroom 5 catalog?

    How can I EXCLUDE particular folders/files from being included in the Lightroom 5 catalog?
    I want to be able to specify paths and/or filename patterns that should NEVER be indexed in the catalog: not that they don't show up under certain circumstances, just that they are NOT THERE (in the catalog) to begin with!!
    I also do NOT want to have to respecify these criteria when "synching" the catalog; criteria should be PERMANENT (or at least 'til they're changed in LR preferences).
    I cannot be the only person in the world with this problem--but it sure seems like it, because I've spent an inordinate amount of time doing online searches & I can't find anything that addresses this issue.
    Can anyone PLEASE HELP me?
    BTW, Adobe employees (if there are any of you out there), I'm simply trying out LR now.  If I can't get this (seemingly fundamental) thing worked out (with relatively little effort), Adobe is going to LOSE A SALE of LR, because it's useless to me without this feature.
    Thanks,
    -t

    Thanks for the info... but how to you TELL LR to EXCLUDE images in a particular directory/directory structure?  The intuitive place to indicate this would be a right-click on the folder itself (or particular images), but no such option exists..  "???"  Thanks again, -pt
    The same way that you avoid buying things in your local convenience store. You don't stick a lot of labels on certain shelves, slap a credit card down on the counter each week, and announce you are buying everything that doesn't have a label on its shelf. You just choose the things you want to buy.
    Your mention of "synching the catalog" suggests that you are expecting the LR library, to mirror the total images in the computer by default. This is not IMO a useful way to think about it. LR contains no images at all, by default: the Catalog starts out empty.
    Then you Add just those selected images that you want to import, among those already in the computer. That's a one-off process which is IMO best achieved controllably in batches - which you can keyword and otherwise organise in LR terms as you go. For new incoming images, ongoing, it is a question of Copying, Moving or Adding these in defined batches as they occur - from the relevant location only - there is no need to re-consider the import of a wider body of images. And one would not want to repeat that whole task anyway: one's prior investment in achieving the right selectivity, has a positive value.
    RP

Maybe you are looking for

  • T430s not entering 30 Day Standby with Power Manager

    I have a T430s with Windows 7 Pro 64-bit that is not entering 30 Day Standby like it should. The issue seems to lie with Power Manager. Inside of Power Manager I have the 30 Day Standby option checked, just like I should, and it is also reflected in

  • Cannot import jpg photos into iPhoto'09

    Before posting, I tried to read previous posts and Google'd the issue, but I have not found a solution that works. Someone sent us pictures from our recent trip to Disney World. I downloaded the pictures to a folder under the Download folder. The pic

  • Mac Mini (mid 2010) - random sand balls

    Hi there I work as an technician at an AASP but I have a Mac which I can't get any grip on. The problem: - When working on the Mac Mini, it sand balls for about 15sec if you click on any item. Parts allready changed: - Logic board - RAM - HD - HD sat

  • Whole Data Retrieval

    Hi Experts, I have one master table, which contains about 16million records. My scenario is to retrieve all the data from the master table and display it using report. I am getting request time out error, when I use select statement. Can anyone tell

  • Different LineMetrics for Type1 & TTF Fonts

    You are able to use Adobe Type1 Font's on an Windows Platform. 1) Copy the pfb and afm file to jre/lib/fonts 2) Start your Programm with -Dsun.java2d.noType1Font=true The Font Engine is now able to use Adobe Type1 Font's Now my Problem: I have the sa