How to get current release code for PO
Dear ALL,
We need a FM or method , which can give us current release code for PO.
We have PO number with us and PO details like Release strategy and release group.
Please help, if anybody knows the way.
Regards,
Nilesh
Hi,
check table EKKO you will get details for that release code
and check following link
[http://www.****************/Tutorials/Workflow/POReleaseStrategy/Details.htm]
Regards
Kailas Ugale
Similar Messages
-
How to get an unlock code for Samsung Galaxy S3?
How to get an unlock code for Samsung Galaxy S3?
Unlocking your device for use on a USA carrier, is not possible.
Maybe in the future but not now.
You will have to purchase a new device on the other carrier.
Unlocked for use in other countries is possible if it isn't already u locked from the factory.
Good Luck -
How to get photoshop activation code for off line computer
I need to get an activation code for an older version of photoshop that I have on an on-line computer. When I contact adobe, it seems that I can only get this code on-line. In the past I was able to get a code over the phone. Can anyone tell me if I can do that again?
I mean an offline computer
-
I do not have the activation code for this PC and need to know how to get the software loaded back on it after a clean install of the OS and other programs.
If you use any additional subscription services to Adobe Reader, they are activated with your Adobe ID & password.
-
How to get current node element for recursive node.
Hello Xperts,
I have a requirement where I need to find the current node element of the recursive node.
I was trying following code for the same
Data:
selected_elem type ref to if_wd_context_element.
selected_elem = WDEVENT->GET_CONTEXT_ELEMENT( NAME = 'CONTEXT_ELEMENT' ).
selected_elem ->get_static_attributes(
IMPORTING
static_attributes = sel_attri ).
But it does not work for me and I always get 1st node value.
Please help me in this issue.
-AshutoshHello ,
If you implementing a simple tree ( not table tree ) and you want the selected element for
OnLoadChildren event .
Then create an importing parameter CONTEXT_ELEMENT of type IF_WD_CONTEXT_ELEMENT
in the event handler of onLoadChildren .
Webdynpro framework automatically filled up the context element with the current node in the tree .
I tried it , It really worked for me .
If you have a table tree then you need to create an importing parameter PATH of type String in tha event handler .
Webdynpro frame automatically fills the PATH .
the use can use the following method to get the element from the PATH .
wd_context->path_get_element( path ).
I tried it , It also worked for me .
Regards
Vivek
PS : please provide the points if answer is helpful . -
How to get "Current" Room RoomID for logged user ?
Hi everyone
Does someone here knows how to get the <i>current</i> <b>RoomID</b> of the Room the user has <u>'open'</u> from a java WebDynpro view ?
I know I can get the list of rooms for the logged user, but I don't know how to get the <u>open/current</u> room for that user, for querying the roomid in the wdp view after that...
Thanks
Best regards
Manuel
ps. Sorry for my english, I hope you all understand me...Hi,
I have the same problem, has you solved it? How?
Thanks in advance,
Regards, -
I need to know the differnece between the Numeric Limit Test between the TestStand version 3.0 to 3.1. If there is any differnec in the source code how to find it out? If somebody has the code can you share it?
Thanks,
JeyanHi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer -
How to get full source code for Oracle ADF?
Hi,
I 'm referring to the following URL http://download-west.oracle.com/docs/html/B25947_01/intro003.htm and it has mentioned that full source for Oracle ADF is available :
"Full source for Oracle ADF is available to supported customers through Oracle Worldwide Support. The full source code for the framework can be an important tool to assisting you in diagnosing problems and in correctly extending the base framework functionality for your needs."
Does anyone know how to obtain such information from Oracle support? Is this from metalinkOne possible snag in the process is that you will have some legal paperwork to sign. Depending on your company's policies, this could pose a problem.
Erik -
How to get a free code for installing Mountain Lion?
Hey!
I bought a MacBook Air 22 of June. I have read that if you bought a MacBook (with Lion 10.7.5) after the 11 of June you can get a free upgrade to Mountain Lion.. so im wondering how I can get this code..?
Thanks!
- JonasWelcome to the Apple Support Communities
I'm sorry, but you are late. Apple isn't offering more codes to upgrade to Mountain Lion for free, so if you want to upgrade to Mountain Lion, open the App Store and purchase it -
How to get current loop pass for LOGICAL DATABASE
HI,
can anyone tell me how to find the current loop pass in case of logical db.
As i have to put some condition when cursor goes to GET statement 2nd time..??
MrunalU need to explicitly handle this in the program.
START-OF-SELECTION.
DATA V_I TYPE I.
Get Event starts
GET PERAS.
V_I = V_I + 1.
IF v_i = 2.
*write the condition ...
ENDIF.
END-OF-SELECTION. -
How to get the error code for http request
I have to implement the if..elso loop depending on the error code return as below.
String host="127.0.0.2"
if the this servers is not found or itis down it should return error code, based on that I have to change the host value to some other server like "127.0.0.4" , Can you let me know how it can be implemented? Please help me.Here is my requirement...
say.. if client hit " http:\\ 172.0.0.3: 1000/index.jsp" and if the server 172.0.0.3 is not available i will set the server host to some other and request will redirect accoringly like " http:\\ 172.0.0.4: 1000/index.jsp" -
How to get current xpog/ypog for command line BOX.
hi,
I have to use three Box command in a winow. each box command covering some variable line, so i cannot put xpog as constant. Hence, i want to know the xpog after 1st box get completed.
e.g.
1st Box:
IF <cond>
BOX Height x1
else
BOX Height x2
endif
2nd Box:
<should start after 1st box get completed>
similarly for third.
Thanx in advance.Hi!
Yes it is possible to play arount with positions of Box.
You can pass variable name in between & in place of fixed XPOS and YPOS.
and pass value to that dynamic variable.
You have to test a lot with different values in those variables for pefect settings.
The variable must be CHAR type, and contain the value like this '10.0'.
Regarrds
Tamá -
How to get Events in code for MDS 9148
I m trying to retrieve Events for Cisco fabric switch MDS-9148.
I can see the events in DCNM UI but couldn't find any web service method or SMI-S class to retrieve value.
Can anyone please help me on this?But for the exception shown below we are able to see the error code.But that has nothing to do with java. That exception originates either in a jdbc driver or much more likely in the underlying database (direct from the database itself.)
Most java exceptions have no such number.
The SQLException does have a getErrorCode() method. It might return something useable. However you are also likely to find that it returns a different number or no number at all. -
In R12 how to get recovery tax code for particular tax rule code.
Hi Experts,
In 11i my query is
SELECT recovery_rate
FROM ap_tax_recvry_rates_all
WHERE rule_id IN (SELECT tax_recovery_rule_id FROM ap_tax_codes_all )
I need to updade this query to R12.1.3.In R12 tax_code and rocovery code both are moved to single table zx_rates_b.
Please provide the joins to upgrade the query to r12
Regards,
Brajesh
Edited by: user13537002 on Jan 3, 2013 5:48 AMHi,
Use the below query.
select * from ZX_MCO_LV_RATES_V
Regards,
Sivakumar -
Anyone know how to get the Authorization Code for Photoshop 7?
I reinstalled it on a new computer and there's no phone support but also no ability to activate it online, keeps saying the activation system is unavailable. Thanks in advance!
Yes, you can install it, you have to copy the folder from the old computer and save it to the new computer and then the CD will install. I've tried 3x's to contact Adobe support through Chat here and their chat feature does not work. I'm assuming they just want you to buy their subscriptions online like Microsoft did with Office 365 and then they leave you hanging.
Maybe you are looking for
-
So, I know it wasn't the battery. Help?!
-
How do I make numbers automatically insert date of table entry?
Hi, I am monitoring time spent on a computer, so every time I log a time on my table in numbers I want it to automatically insert the date of that entry in the next column, I do not know how to do this, I hope someone can help me resolve this issue,
-
The calendar app on my iphone crashes
When i open my calendar to view my upcoming event, as soon as i chose a day to look at, the calendar goes back to the home screen. I have restored the phone to its factory settings and then synced it with the icloud calendar adn it does not do this.
-
Hello I want to write an ABAP Program and get the results/output reported to BW,? Is it possible?. can anyone kindly suggest some solutions?. where can I find this info ?. regards Shiva
-
Change logical port during runtme
Hi, i have program that read logical port of webservice and i want to know if i can change it during runtime from the default to other logical port , Thanks , Joy Edited by: Joy Stpr on Jul 25, 2009 11:06 PM