How to get custom scrollbar in captivate
I am working with Adobe captivate V 3.0. I need custom
scrollbar by which i can scroll some images.
Does this software provide this facility? If Yes, how can i
get it?
Thanks!
Hi semaphorian and welcome to our community
Assuming I'm understanding what you are asking, Captivate in
and of itself does not provide such a facility.
Now that I've tossed that out, I should probably state what I
understood you to ask. When you asked if Captivate could use a
custom scrollbar to scroll images, I'm assuming you mean to ask if
you are able to insert an image that is actually larger than the
slide itself. Then you would use a scroll bar to pan the image to
bring the hidden areas into view.
I do suppose it's possible that you meant to ask if you could
have a series of images similar to a slide show. Then use a scroll
bar to move from image to image. And if that is what you are
asking, I'm thinking that Captivate could actually accomplish that.
Basically you would simply insert an image on each slide (or create
a project based on images) and use a playback control as the
*scrollbar* to move from slide to slide and display the different
images.
Hopefully something here was helpful to you... Rick
Similar Messages
-
How to get custom defined messages in WAD
Hi
can you please help me how to get customized error messages in WAD.
While I'm executing in RSRT the customer exit variable throws error message saying that 'No Sales orders exist for this Sold_To Party' but when I execute same query using Bex WAD, then no error message throwing for me for given sold_to party. I tried with all options as given in below code, but WAD gives me system error that "No values found for the customer exit variable 'Zxxxx'. Please help me in this regard. Should I do any settings in WAD to get custom defined messages. Kindly let me know
my code is as below
I_STEP = 2.
CASE i_vnam.
WHEN 'Custome exit variable'.
IF sy-subrc = 0.
ELSE.
MESSAGE e060(/bmc/bw). "No Authorization exist
g_errflag1 = 'X'.
exit.
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
i_class = '/bmc/bw'
i_type = c_e "'E'
i_number = '061'
i_msgv2 = l_msgv2.
RAISE NO_REPLACEMENT.
l_s_range-low = g_soldto.
l_s_range-sign = c_sign_i.
l_s_range-opt = c_range_opt_eq.
APPEND l_s_range TO e_t_range.
ENDIF.
I_STEP = 3.
READ TABLE i_t_var_range INTO w_s_var_range
WITH KEY vnam = 'customer exit variabel'.
IF sy-subrc = 0.
Check the flag and throw message 'No Sales orders'.
IF g_errflag1 = 'X'.
l_msgv1 = 'No Sales orders'.
Call the FM to populate message
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
i_class = c_r9
i_type = c_e "'E'
i_number = c_000
i_msgv1 = l_msgv1
EXCEPTIONS
dummy = 0
OTHERS = 0.
CALL FUNCTION 'RRMS_MESSAGES_SHOW'.
CALL FUNCTION 'RRMS_MESSAGES_DELETE'.
RAISE NO_REPLACEMENT..
ENDIF.
Thanks & Regards
siluHi
Custom Messages WAD -
How to get more features for Captivate 6
Hi all,
I've installed Captivate 6 on my laptop at work, I use it for creating training material for our project management system. I was just looking at some Adobe video tutorial and there are some features shown in the videos that I can't find on my captivate (for example Drag and Drop interaction, some particular widget like "Hangman" etc...). I tried to download them, clicking on the "Download more interactions" but there are any available. So, is there a way to get those features, at least those shown in your video tutorial for Captivate 6?
Thank you very much
ElenaHello,
thank you for your answer.
I have the version 6.0, so maybe I can't get those features because of the version that I have.
Even if I click on "Download more" on the Interactions window, there are no Interactions available, but is it a problem related to my version or it's because there aren't available new features?
Thank you very much,
Elena Bettarini
Date: Thu, 14 Nov 2013 00:40:11 -0800
From: [email protected]
To: [email protected]
Subject: How to get more features for Captivate 6
Re: How to get more features for Captivate 6
created by Lilybiri in Adobe Captivate - View the full discussion
Hello and welcome,
I cannot remember for the Hangman interaction anymore, but Drag&Drop was only available for subscription users, for version 6.1.0.3190 Maybe it was not clear in the video you are pointing at, that not all features were available for box licenses. Which version do you have?
Lilybiri
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5841167#5841167
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5841167#5841167
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5841167#5841167. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Captivate at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
How can our customer edit our Captivate 6 content with Captivate 5?
Our company has decided to dive into the e-learning business and create e-learnings. We just purchased a Captivate 6 subscription, unfortunately before finding out our customer uses Captivate 5. He would like to edit our files once in a while when he needs to if he doesn't have enough time to have us do it. Is there anyway he can edit content produced in Captivate 6 with his Captivate 5. Can I export files of a certain type that he can in turn import and add to his Captivate 5 and edit himself? In other words, what kind of files can I export from Captivate 6 than he can import with Captivate 5 and make small changes to?
Vielen Dank,
RyanThank you. I see that I can export content as an .xml file. Isn’t this something he can upload with Captivate 5? Thanks for bearing with my naivety. : )
Von: RodWard [email protected]
Gesendet: Mittwoch, 1. August 2012 14:25
An: Scharfer, Ryan
Betreff: How can our customer edit our Captivate 6 content with Captivate 5?
Re: How can our customer edit our Captivate 6 content with Captivate 5?
created by RodWard<http://forums.adobe.com/people/RodWard> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/4591371#4591371 -
How to get customer number and name from the SD document
Hi All,
Can you please let me know how to get Customer Number and Name from the SD Document?
Thanks a lot....
AnilHi,
It will be displayed in the SD (BIlling document) itself, you clikc on the VF03. The customer name and number will also appear in the SO document also Tcode VA03
regards,
radhika
Edited by: kolipara radhika on Jul 10, 2009 5:32 AM -
How to get customer-specific objects into PCUI ?
Hello,
we want to get an Z-table as tab page of the business partner-application into PCUI. It should 'only' be possible to create new entries - today there is no need to modify or delete records.
Does there exist something like a "cookbook" on this task or has anyone of you experience how to get customer-specific objects (without using EEWB) into PCUI ?
Thanks in advance
MartinOption 1:
If you are good in ABAP.
You can add new tab in which create a new Field group. Assign it to a model access clas in which handle the table update.You can get the details in PCUI cookbook itsel.
Option 2:
If you are good at java
Develop an FM to update the table.
Call the FM from webdynpro
Include this webdynpro as HTML viewer in PCUI.
Regards,
Abdul Raheem S -
How to get customer no relating to a Business partner No
How to get customer no relating to a Business partner No . Is that Customer unique ?
hi arshad,
based on business partner u can get customer number. both tables having some uniqe field...based on that uniqe field u can identify business partner no.......
if it is usefull review the points -
How to get custom field value in vbkd table using "SD_SALESDOCUMENT_CREATE" bapi
Hi Experts,
Need your help . In one program Iam using SD_SALESDOCUMENT_CREATE bapi .
i/p for my report is am excel.
excel is having below formatt.
To create salesdoc we are using SD_SALESDOC_CREATE bapi.
but After execution of the program we are unable to find the ZZFV_SBCNT (which is custom field) in VBKD w.r.t salesdocument.
Need your help what we need to do to reflect the value in vbkd table.
Here temp will contains the data from excel
1)
FORM f_move_header_data .
wg_header-doc_type = wg_temp-auart . "Order type
wg_header-sales_org = wg_temp-vkorg . "Sales Organization
wg_header-distr_chan = wg_temp-vtweg . "Distribution Channel
wg_header-division = wg_temp-spart. "Division
wg_header-sales_off = wg_temp-vkbur . "Sales Office
wg_header-sales_grp = wg_temp-vkgrp . "Sales Group
wg_header-purch_no_c = wg_temp-bstnk . "Customer purchase order number
wg_header-pymt_meth = wg_temp-zlsch . "Payment Method
wg_header-zzychan_role = wg_temp-zzychan_role_i. "Channel Role
wg_header-zzysub_role = wg_temp-zzysub_role . "Submitter Role
wg_header-zzy_inv_for_opt = wg_temp-zzinv_format . "Invoice Format Optio
wg_header-ord_reason = wg_temp-augru . "Order Reason Code
wg_header-bill_block = wg_temp-faksp. "Billing Block
wg_headerx-doc_type = c_set . "Order type
wg_headerx-sales_org = c_set . "Sales Organization
wg_headerx-distr_chan = c_set . "Distribution Channel
wg_headerx-division = c_set. "Division
wg_headerx-sales_off = c_set . "Sales Office
wg_headerx-sales_grp = c_set . "Sales Group
wg_headerx-purch_no_c = c_set . "Customer purchase order number
wg_headerx-pymt_meth = c_set . "Payment Method
wg_headerx-zzychan_role = c_set. "Channel Role
wg_headerx-zzysub_role = c_set . "Submitter Role
wg_headerx-zzy_inv_for_opt = c_set . "Invoice Format Option
wg_headerx-ord_reason = c_set . "Order Reason Code
wg_headerx-bill_block = c_set. "Billing Block
ENDFORM. " F_MOVE_HEADER_DATA
2)
FORM f_move_item_data .
wg_item-itm_number = g_itmnumber. "Item number
wg_item-material = wg_process-matnr . "Material
wg_item-target_qty = wg_process-target_qty. "Targeted Qty
wg_item-item_categ = wg_process-pstyv. "Sales document item category
wg_item-zzylegal_i = wg_process-zzlegal. "Legal Contract
**********Added this line for vbkd-ZZFV_SBCNT****************************
wg_item-zzfv_sbcnt = wg_process-zzfv_sbcnt.
APPEND wg_item TO i_item.
wg_itemx-material = c_set . "Material
wg_itemx-target_qty = c_set. "Targeted Qty
wg_itemx-item_categ = c_set. "Sales document item category
wg_itemx-zzylegal_i = c_set. "Legal Contract
wg_itemx-zzsteady_date = c_set . "Amortization Start Date
wg_itemx-zzsteady_end_dat = c_set. "Amortization Stop Date
**********Added this line for vbkd-ZZFV_SBCNT****************************
wg_itemx-ZZFV_SBCNt = c_set. "
APPEND wg_itemx TO i_itemx.
CLEAR : wg_itemx.
endform.
3)
FORM f_move_head_ext
wg_extension-structure = c_ext_vbak.
wg_ext_vbak-zzinv_format = wg_temp-zzinv_format.
wg_ext_vbak-zzychan_role = wg_temp-zzychan_role_i.
wg_ext_vbak-zzysub_role = wg_temp-zzysub_role.
wg_extension+30 = wg_ext_vbak.
APPEND wg_extension to i_extension.
CLEAR wg_extension.
wg_extensionx-structure = c_ext_vbakx.
wg_ext_vbakx-zzinv_format = c_set.
wg_ext_vbakx-zzlegal = c_set.
wg_ext_vbakx-zzychan_role = c_set.
wg_ext_vbakx-zzysub_role = c_set.
wg_extensionx+30 = wg_ext_vbakx.
APPEND wg_extensionx TO i_extensionx.
CLEAR wg_extensionx.
ENDFORM. " F_MOVE_HEAD_EXT
*& Form F_MOVE_ITEM_EXT
* Item Extension
4)
FORM f_move_item_ext .
* Structure for BAPI parameter Extension
wg_extension-structure = c_ext_vbap.
wg_ext_vbap-posnr = g_itmnumber.
wg_ext_vbap-zzsteady_date = wg_process-zzsteady_date . "Amortization Start Date
wg_ext_vbap-zzsteady_end_dat = wg_process-zzsteady_end_dat. "Amortization Stop Date
wg_ext_vbap-zzlegal = wg_process-zzlegal. "Legal Contract
wg_extension+30 = wg_ext_vbap.
APPEND wg_extension to i_extension.
* Structure for BAPI parameter Extension - Update Indicator Fields
wg_extensionx-structure = c_ext_vbapx.
wg_ext_vbapx-posnr = g_itmnumber.
wg_ext_vbapx-zzsteady_date = c_set .
wg_ext_vbapx-zzsteady_end_dat = c_set.
* wg_ext_vbapx-zzlegal = c_set.
*wg_process-zzfv_sbcnt = c_set.
wg_extensionx+30 = wg_ext_vbapx.
APPEND wg_extensionx TO i_extensionx.
CLEAR wg_extensionx.
and bapi calling is like below.
CALL FUNCTION 'SD_SALESDOCUMENT_CREATE'
EXPORTING
sales_header_in = wg_header
sales_header_inx = wg_headerx
logic_switch = wg_logic_switch
business_object = fp_bus_obj
status_buffer_refresh = 'X'
IMPORTING
salesdocument_ex = g_sorder
TABLES
return = i_return
sales_items_in = i_item
sales_items_inx = i_itemx
sales_partners = i_partner
sales_conditions_in = i_cond
sales_conditions_inx = i_condx
sales_text = i_text
extensionin = i_extension
extensionex = i_extensionx.
still we are not getting ZZFV_SBCNT value in VBKD table w.r.t created salesdoc(g_sorder)
Please help me from this issue.
Thank You..Hi,
Please let me know how to add custom fields in the characteristic list, My clients wants department and profit center grouping.
Please tell me how to solve it..
Thanks & Regards,
Reena.. -
How to get customer consignm orders (type of cat item KBN) updates LIS
Good morning,
we have an issue with this type of sales orders, we are trying to update an not standard info structure (created by us) but we have found that this type of category item is not relevant foe info structure updating (it has Statistics group for the item category
equal blank).
Does anybody know how to get that this type of item category is relevant foe that updating??
thank you very much in advance,
regards,
MariaI believe you can use one of the customer exits in the FM which creates your IDOC to filter items.
-
How to get custom iCal colors to carry over to iPad or iPhone calendars
How do I get custom calendar colors designated on my iMac to carry over to my iPad or iPhone? It used to do so, and now it no longer does.
Thanks Joe. We have discovered from this forum, actually, that if you send the photos from the iPhone, if that's where they were taken, then you are asked what size.
"If you send from the camera, then you get the option of reducing the size. If you send from your other photos synced from your computer, they don't have that option of reducing."
I tested it by sending a couple of photos taken by my iPhone, and sure enough, was asked as to size. Then sent the same two photos from my iPad (Photostream) and was not asked. Interestingly though, the sizes were identical in both emails. -
[JS CS5]How to get Custom Page size
I've been searching the answer of this simple question but looking no way around.
I have an InDesign document with different page size e.g. left page width is 621 pt. and on the same document right page width is 837 pt.
Now I need to get the width of pages using script but app.documentPreferences.pageWidth return standard document preset size(621 pt.) not the custom page size.
Does any one have the Idea to get custom page size using script.
Thanks in advance
MacMac,
as documentation is showing there are some new properties of "page" since InDesign CS5.
Among those is:
bounds Array of Measurement Unit (Number or String) readonly The bounds of the Page, in the format [y1, x1, y2, x2].
So:
myPage.bounds
and pageWidth of the documentPreferences might be:
myPage.bounds[3]-myPage.bounds[1]
unless myPage is transformed (e.g. rotated and/or sheared and/or scaled) with:
myPage.transform()
void transform (in: CoordinateSpaces, from: varies, withMatrix: varies[, replacingCurrent: varies][, consideringRulerUnits: bool=false])
Transform the page item.
var d = app.activeDocument;
var myPage = d.pages[0];
var oldPB = myPage.bounds;
var rAngle = -45;
var sAngle = 40;
var myTransformationMatrix1 = app.transformationMatrices.add({counterclockwiseRotationAngle:rAngle});
myPage.transform(CoordinateSpaces.INNER_COORDINATES, AnchorPoint.CENTER_ANCHOR, myTransformationMatrix1);
var myTransformationMatrix2 = app.transformationMatrices.add({clockwiseShearAngle:sAngle});
myPage.transform(CoordinateSpaces.INNER_COORDINATES, AnchorPoint.CENTER_ANCHOR, myTransformationMatrix2);
var newPB = myPage.bounds;
$.writeln(oldPB);
$.writeln(newPB);
Now oldPB and newPB will differ a lot.
So, the question remains: what is a reliable way to show if the myPage was or was not transformed against documentPreferences.pageWidth or if myPage is of rectangular shape at all. See the possibility of adding a sheer angle to the transformation matrix. Also see screen shot:
Transform_Page_CS5.png
Uwe -
How to get custom trigger result when insert
I set a trigger before insert, if the result was $aa = 50;
how to get $aa?
it doesn't work
$ins_testtable->addColumn("t_num", "NUMERIC_TYPE", "VALUE", $aa);I tried this one, actually, {GLOBALS.variable_name} is one of mark-up language,I add echo $a this time, after submit, $a appear on the page, so I think "definea trigger" has been executed successfully, but still got error message
<br />
<br />http://uploads.screenshot-program.com/my.php?image=upl2682569831.jpg
<br />
<br />code
<br />--------------------------------------------------
<br /><?php require_once('Connections/conndb.php'); ?>
<br /><?php<br />// Load the common classes<br />require_once('includes/common/KT_common.php');<br /><br />// Load the tNG classes<br />require_once('includes/tng/tNG.inc.php');<br /><br />// Make a transaction dispatcher instance<br />$tNGs = new tNG_dispatcher("");<br /><br />// Make unified connection variable<br />$conn_conndb = new KT_connection($conndb, $database_conndb);<br /><br />//start definea trigger<br />function definea(&$tNG) {<br />global $a;<br />$a = 100;<br />}<br />//end definea trigger<br /><br />// Make an insert transaction instance<br />$ins_testtable = new tNG_insert($conn_conndb);<br />$tNGs->addTransaction($ins_testtable);<br />// Register triggers<br />$ins_testtable->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "POST", "ins");<br />$ins_testtable->registerTrigger("BEFORE", "definea", 50);<br />// Add columns<br />$ins_testtable->setTable("testtable");<br />$ins_testtable->addColumn("t_name", "STRING_TYPE", "POST", "t_name");<br />$ins_testtable->addColumn("t_num", "NUMERIC_TYPE", "VALUE", "{GLOBALS.a}");<br />$ins_testtable->setPrimaryKey("t_id", "NUMERIC_TYPE");<br /><br />// Execute all the registered transactions<br />$tNGs->executeTransactions();<br /><br />// Get the transaction recordset<br />$rstesttable = $tNGs->getRecordset("testtable");<br />$row_rstesttable = mysql_fetch_assoc($rstesttable);<br />$totalRows_rstesttable = mysql_num_rows($rstesttable);<br />?>
<br />
<br />
<br />
<br />
<br />
<br />
<script src="includes/common/js/base.js" type="text/javascript"></script>
<br />
<script src="includes/common/js/utility.js" type="text/javascript"></script>
<br />
<script src="includes/skins/style.js" type="text/javascript"></script>
<br />
<br />
<br />
<br /><?php echo $a; ?>
<br />
<form id="form1" name="form1" method="post" action="">
<br />
<label for="t_name">tname</label>
<br />
<input type="text" name="t_name" id="t_name" />
<br /> <?php<br /> echo $tNGs->getErrorMsg();<br />?>
<br />
<input type="submit" name="ins" id="ins" value="submit" />
<br /></form>
<br />
<br /> -
Trying to figure out how to get custom quiz concept to work
OK so I've been trying to get this concept to work in CP4. I have simulation quiz questions that gives the user 2 attempts to answer the quiz. The one hitch is that if the user get the question wrong the first time it gives them an "incorrect try again" message and if they get it wrong the second time it gives them an "incorrect please review section...." message. Now I've been trying to get this to work many ways and haven't been able to get the quiz to score right due to the fact I can't get CP to let me use the multiple incorrect feedbacks in a single click box.
I've tried setting up the questions using 2 click boxes (each click box has a different incorrect feedback message) but I run into the issue of if I answer the question right the first time then the second click box goes unscored and throws off the percentage. I've been trying to figure out a way to manipulate the captivate system variables (cpinfoquizpasspoints, cpinfototalquestionsperproject, cpinfopointsscored) but I can't for the life of me figure out how to update the variables (ex. overide the cpinfototalquestionsperproject with my own number or add additional points to the cpinfopointsscored variable if the user gets the question right the first time. Basically I need to fig out a way to get this to work and ultimately be able to communicate to a Sumtotal LMS what the results are. I'm very open to suggestions
Thanks
B
btw. I'm really disappointed that CP4 allows different feedback messages on multiple attmeps for their built in questions but not for custom click box questions!!!!I would try the multi choice like captiv8r said. if that doesn't work try a clickbox for each answer and:
Some quick notes for set up. Slide XX represents the slide that will contain the next question in the quiz. You may want to create all the slides (even if they are blank) as place holders for each question in the quiz. So if a question has 4 possible answers that's gonna be 4 slides for that question. If you have 5 questions and they all have 5 answers then you want to create 25 slides for the questions. (I think I did the math right on that )
Change the properties for the click box to on success: go to next slide (unless this is the correct answer then select jump to slide XX). Change the options
Under Options Only check Success Caption, Pause project until user clicks and pause for success/failure captions.
Click OK......You will be given a click box with a green box that says type success text here.
Right click on the green box and select Properties
If this box is the right answer type in Correct or something to that extent. If its the wrong answer type in "Answer is wrong because ..bla bla bla..... reasons". You can format the font to be red or green and choose the appropiate caption type to match your color scheme (or create your own custom caption)
Click OK.
After that all you have to do is duplicate the click box (right click on the click box and select duplicate) and edit the caption to be either "correct" or "answer is wrong because....."
Once you have all your captions in place you can copy the entire contents of the slide an paste it into the rest of the slides set up for that question (remember if the question has 4 answers then thats 4 slides for that question)
repeat steps 1 - 9 for the rest of the questions.
Some things you want to consider. If you only want to give the user say 2 attempts per question then you want to modify the setup to only 2 slides per question. That way if they get it wrong on teh second attempt they are advanced to the next question. If you are scoring this quiz you will have to set-up some variables for scoring.
The method above is what I used to answer my own question from the original post.... Lots of work but it got the job done! Good luck.
B -
How to get Custom-Content-type Column Value of a Document Library-Folder
Hello
I have to add a custom-column(folder-imageURL) for Folders in a Document Library.
So I have created a Custom-CotentType "FolderCtype" with new column "folder-imageURL" and attached in the Document Library.
Whenever I create a new folder in that document library I will select my "FolderCtype" & and then add an image url in "folder-imageURL" column.
How do I access this image url in Code?
part of my code is as follows.
SPContentType cntType = List.ContentTypes["FolderCtype"];
SPField field = cntType.Fields.GetField("folder-imageURL"); //I have Field name here//
foreach (SPFolder folder in RtFolder.SubFolders)
if (folder.Name.ToUpper() != "FORMS")
string FolderName = folder.Name;
string FolderImageUrl = ? //How can I get this????//
Thanks in advanceHi, Patrickm, Thank You
If your “folder-imageURL” column is a “Hyperlink or Picture” column, then you can get the hyperlink like this:
SPListItem item = folder.Item;
if (item[field.Title] != null)
string FolderImageUrl = item[field.Title].ToString().Split(',')[0];
Console.WriteLine(FolderImageUrl);
Best regards,
Patrick
Patrick Liang
TechNet Community Support
S H A J A N -
How to get custom formating to show in export as HTML CS4
Using a copy of CS4, I am exporting an indesign document that has custom formated words. That is some words are italicized and don't conform to the paragraph style (I have to do this as I get all my documents from Microsoft Word Files). The italicized text shows up as a paragraph style such as "BodyText+" where the normal text is "BodyText". Manually applying a character style to all the italicized text would be impossible.
How can I export as html in this case? Is there a way to format all BodyText+ with a special character style?Well I guess the find/replace all seems to have set the character styles in the InDesign document, but, it makes no difference in the html output
It still looks like <p class="body-bodytext">nonitalics italics</p>.
Does anybody know how to make it do something like this:
<p class="body-bodytext">nonitalics <span ="italics_character_style"> italics</span></p> ?
I can write the post processing stuff as long as it somehow notes the difference
Maybe you are looking for
-
I can't gte spell check to work it just says Most browsers check for spelling mistakes automatically. Look for the words that are flagged by red lines and right-click them to see suggestions. Note that with some browsers, you may need to download a d
-
TV@nywhere -- no sound when timeshifting
I just installed my card, and most of it works, although some of the channels are have really bad reception, and tuning is no help. Anyway, the big problem I can't seem to solve is with pausing and timeshifting. Both work, but I get no sound on play
-
RAW file Sony RX100 Elements 9
Using Photoshop Elements 9, I installed the camera RAW plug-in 6.5.0.216 to be able to open the RAW pictures from my new Sony RX100. This camera is said to be supported, but Elements can not open it: wrong file-type, it says! The camera RAW plug-in +
-
13,000 records are rejected in dataload-intigration services
HI, I am getting the below error while data in intigration services... [Fri Sep 12 04:44:20 2008] /IS//0x0/1221209183/Error/0/Build-EIS7124B007 Essbase Error Number 1030013.Failed to unload database 13000 number of records are rejected while dataload
-
Hi Experts, Is it possible to receive goods in pallet at storage location level. For my customer, we are not implementing full fledge WM. In thr business processes (Furniture industry), they are receiving wood (Raw Material) in pallets.They want syst