How to get data based on selection screen on the output
Hi Expert,
Can any one tell me based on material number on slection screen correspondind field i.e on selection scren
WERKS,MTART,EKGRP,DISPO,BESKZ,MATNR should also get. i.e if i give mtart on selection screen corresponding to material number mtart shoul get.
NOTE: I HAVE WRITTEN SELECT QUERY FOR TWO TABLES I.E MARA,MBEW.
Below is my code
TABLES:MARA,MARC,MARD.
TYPES: BEGIN OF ty_mbew,
matnr TYPE matnr,
bwkey TYPE werks_d,
lbkum TYPE lbkum,
END OF ty_mbew.
TYPES: BEGIN OF ty_close_stk,
mandt TYPE mandt,
matnr TYPE matnr,
cdate TYPE zwkdate,
bwkey TYPE werks_d,
meins TYPE meins,
zlbkum TYPE lbkum,
WERKS TYPE WERKS, "
MTART TYPE MTART,
EKGRP TYPE EKGRP,
DISPO TYPE DISPO,
BESKZ TYPE BESKZ,
salk3 TYPE salk3,
END OF ty_close_stk.
TYPES: BEGIN OF ty_mbewh,
matnr type matnr,
bwkey type bwkey,
lbkum type lbkum,
lfmon type lfmon,
end of ty_mbewh.
TYPES: begin of wa_matnr,
matnr type matnr,
end of wa_matnr.
dATA : it_matnr type standard table of wa_matnr.
DATA : it_close_stk_del TYPE STANDARD TABLE OF zclose_stock WITH HEADER LINE.
DATA : it_close_stk TYPE STANDARD TABLE OF ty_close_stk,
it_mbew TYPE STANDARD TABLE OF ty_mbew,
wa_close_stk TYPE ty_close_stk,
wa_mbew TYPE ty_mbew,
it_mbewh TYPE STANDARD TABLE OF ty_mbewh, "89286
wa_mbewh TYPE ty_mbewh. "89286
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE TEXT-001.
89286*********************
SELECT-OPTIONS: WERKS FOR MARD-WERKS, "Plant
MTART FOR MARA-MTART, "Material type
EKGRP FOR MARC-EKGRP, "Purchasing group
DISPO FOR MARC-DISPO, "MRP Controller
BESKZ FOR MARC-BESKZ, "Procurement type
s_MATNR FOR MARA-MATNR. "Material number
************89286***************
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE TEXT-002.
select MATNR INTO CORRESPONDING FIELDS OF TABLE IT_MATNR
FROM MARA
WHERE MATNR IN S_MATNR.
SELECT matnr
bwkey
lbkum
salk3 "MSK25072011
FROM mbew INTO CORRESPONDING FIELDS OF TABLE it_mbew
WHERE lfgja = fis_year
where matnr in s_matnr
and bwkey in werks.
Hi
Perhaps I don't understand yet, but you have several select-options in your selection-screen, every select-options can be assigned to different tables (MARA, MARC, MBEW), so you need to decide if to use a JOIN o single SELECTION in order to get all data in one step or many steps.
IF you need to do several selections, these have to be linked in order to get the data for the records selected in the previous selection, something like that:
SELECT matnr mtart INTO TABLE t_mara
FROM mara
WHERE matnr IN s_matnr
AND mtart IN s_mtart.
IF sy-subrc = 0.
SELECT matnr werks ekgrp INTO TABLE t_marc
FROM marc
FOR ALL ENTRIES IN t_mara
WHERE natnr = t_mara-matnr
AND ekgrp IN s_ekgrp.
IF sy-subrc = 0.
SELECT matnr bwkey lbkum salk3 INTO TABLE t_mbew
FROM mbew
FOR ALL ENTRIES IN t_marc
WHERE matnr = t_marc-matnr
AND bwkey = t_marc-werks.
ENDIF.
ENDIF.
But you can use an single join with all tables
Max
Similar Messages
-
How to default date values in Selection Screen
Hi everyone,
I would like to display the 1st day of the previous month into the I_GSTRP-LOW field and the last day of the current month into the I_GSTRP-HIGH field.
For example, this in the 5th month of the year (May), therefore, in the selection screen it should appear like this:
Basic Date: <u>01.04.2006</u> to <u>31.05.2006</u>
How do i do it?
*& SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
I_AUFNR FOR AFIH-AUFNR, "ORDER NUMBER
I_GSTRP FOR AFKO-GSTRP, "BASIC DATE
I_BUDAT FOR AUFM-BUDAT, "POSTING DATE
I_IWERK FOR AFIH-IWERK DEFAULT '6010' OBLIGATORY, "PLANNING PLANT
I_ARBPL FOR CRHD-ARBPL, "WORK CENTER
I_ERNAM FOR AUFK-ERNAM, "CREATED BY
I_MATNR FOR RESB-MATNR, "MATERIAL
I_KTEXT FOR AUFK-KTEXT. "EQUIPMENT
SELECTION-SCREEN END OF BLOCK 1.Here is the code to populate default values,as per your requirement.
data : V_date type sy-datum,
v_month(2) type c,
v_low_value(8) type c,
v_high_value(8) type c,
v_month1(2) type n,
V_NO_OF_DAYS type T009B-BUTAG,
v_curr_month type T009B-BUMON,
v_curr_year type T009B-BDATJ.
select-options : i_gstrp for sy-datum.
initialization.
v_date = sy-datum.
v_month1 = v_date+4(2) - 1.
write v_month1 to v_month.
concatenate v_date+0(4)
v_month
'01'
into v_low_value.
I_GSTRP-LOW = v_low_value.
v_curr_month = sy-datum+4(2).
v_curr_year = sy-datum+0(4).
CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
EXPORTING
par_month = v_curr_month
par_year = v_curr_year
IMPORTING
PAR_DAYS = V_NO_OF_DAYS
concatenate sy-datum+0(6)
V_NO_OF_DAYS
into v_high_value.
I_GSTRP-HIGH = v_high_value.
I_GSTRP-sign = 'I'.
I_GSTRP-OPTION = 'EQ'.
APPEND I_GSTRP.
regards
srikanth -
How to get default values on selection screen(multiple ranges)?
i want to know how to maintain default ranges in selection screen...like 2000 to 3000 and 7000 to 8000 and 11000 to 15000
all the above ranges must get by default how to provide those to selection screen by default...please give me idea...with example...Hi Suresh,
You can either use select-options or Ranges. If you want the selection screen to be displayed with allwoing user to enter values apart for the default ones use select options else use ranges. With ranges what ever values use hard code would be set and the end user will not be able to add any more values (or range of values).
Simply write the following code
tables : <name of the table from which the field belongs>
select-options <fieldname> for <tablename>-<fieldname>.
<fieldname>-sign = 'I'.
<fieldname>-option = 'BT'.
<fieldname>-low = '7000'.
<fieldname>-high = '8000'.
append <fieldname>..
similiarly add all the ranges that you need to include as default and in your select statement use the IN operator inthe where clause to include the range.
If using range replacethe select-option with the range statement.
Thanks. -
How to get physical number of selected row on the screen.
Hi,
We have block defined with Numbers of Records Displayed = 3. In the same time the data set contains 10 records. We would like to know how to get a number of row selected on the screen. i.e. in our case that the number will be always between 1 and 3 independent of the current row position in the data set.
Best regards,
Constantin.You can calculate that number by subtracting :SYSTEM.CURSOR_RECORD and GET_BLOCK_PROPERTY('BLOCK', TOPMOST_RECORD)
-
How to get modified values in selection screen
address data is filled in selection screen by default.
if we want to change the address on selection screen
and pass it to another variable .how to handle this please let me knowHi,
Change the value of address in the selection screen by delting the default value and replcaing it by new 1.
Then assigh this value of that variable to the new variable
new_variable = variable. -
Selection-screen in the output of the program
Hi,
I want to print the selection criteria ( or Values ) in the output of the program on the RIGHT HAND SIDE OF THE HEADER. I am doing code through ALV and I want to include the respective code in 'TOP_OF_PAGE'
If there are no values in the selection screen fields, then I DO NOT Print them. Start the values with the texts, such as 'Material', 'Plant', 'MRP Controller' etc. For single values, print the values separated by commas, For a range of values, print the values separated by '-', For the exclusion of single values, print 'EX' before the values.
Thanks in Advance.To get the parameter list, use [RS_REFRESH_FROM_SELECTOPTIONS|https://forums.sdn.sap.com/search.jspa?objID=c42&q=RS_REFRESH_FROM_SELECTOPTIONS], the rest is basic Abap.
Regards,
Raymond -
Is it possible to display a tag at the selection screen in the output.
Hi all,
When you go to se38 and in the program editor screen, at the bottom right end of the screen you find a value called NUM and when you place your cursor on that it displays a tag that says "Num Lock Mode. Double click to toggle."
My query is, when i execute a report it takes me to the output screen that has a parameter, here i want to display a tag, say "enter the record as it is in the database". Is it possible to have such an option.
If you'll are wondering why I'm looking for such an option it is just to make a report that can be understood by many.
P.S: Not only on the NUM field the tag is available. Even on tools like activate display and so on.
Regards,
Narayanan Chandran.If it's a report program, use a comment in the selcetion screen for information of the user as shown below.
* Information
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-003.
SELECTION-SCREEN COMMENT /1(60) text-004. "Text containing the information message
SELECTION-SCREEN END OF BLOCK b1.
If you are using a module pool, you can create a tooltip for the element as suggested. -
How to get required tags and name spaces in the output File?
Hello,
I am doing IDOC to File sceanrio and I am able to get the file but the problem is that I am unable to get the required tag names. Out put file is having ns0 ns1 and so on..
Eg:
ns2:MaterialDefinitionProperty><ns2:MaterialDefinitionProperty><ns2:ID>CU_NET_WEIGHT</ns2:ID></ns2:MaterialDefinitionProperty><ns2:MaterialDefinitionProperty><ns2:ID>EAN_SKU</ns2:ID></ns2:MaterialDefinitionProperty><ns2:MaterialDefinitionProperty><ns2:ID>CUPerCase</ns2:ID>
and so on..
Source structure is IDOC
Target structure is External Defination imported with references.
How can I get the output file with the exact namespaces and tags as imported through External Definations.
Thanks in Advace.HI! Rajeev,
I have gone through this forum and we having 100% same to same requirement here in my project.
We want this at the top of the Output Payload..
<?xml version="1.0" encoding="UTF-8" ?>
- <SyncMaterialDefinition xmlns="http://www.siemens.com/ad/mes/b2mt-1.0" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:bml="http://www.wbf.org/xml/b2mml-v02" xmlns:sit="http://www.siemens.com/ad/mes/b2mml-v02-SITExt-1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:oag="http://www.openapplications.org/oagis">
- <oag:ApplicationArea>
and also isome part of payload nstead of ns0: and ns1:
we want it as below for some part of same output payload
<oag:ApplicationArea>
- <oag:Sender>
<oag:LogicalId>SAP</oag:LogicalId>
<oag:Component>PMConnector</oag:Component>
<oag:ReferenceId />
<oag:Confirmation>Always</oag:Confirmation>
</oag:Sender>
<oag:CreationDateTime>2009-06-14T22:23:29.42Z</oag:CreationDateTime>
</bml:MaterialDefinitionProperty>
- <bml:MaterialDefinitionProperty>
<bml:ID>XXXXXXX</bml:ID>
- <bml:Value>
<bml:ValueString>0.0</bml:ValueString>
<bml:DataType>string</bml:DataType>
<bml:UnitOfMeasure>n/a</bml:UnitOfMeasure>
<bml:Any />
*</bml:*Value>
Check the above code how we want but we are getting in normal way .
Could you please review this and guide me in detailed way how to do in a step by step manner if possible by taking my above payload condition.
Regards:
Amar Srinivas Eli -
How to get data from excel sheet present in the client(local) system?
hi,
I have to upload the data from an excel sheet present in the local system(not on the server) to the table using webdynpro.
i donot want to upload the excel file
if it is necessary to upload the file then it should be on temporary basis and it should be deleted automatically.
i can get the data from excel sheet which is present in the km using HSSF api but how to do the same if it is in local system?
if anyone has the sample application of this type please give me the link.
thanksYou can use the FM ALSM_EXCEL_TO_INTERNAL_TABLE with Web Dynpro ABAP.
-
How to pass value from the Z Report to the selection screen of the std rep
Dear Experts,
i have developed a report and the values are maintained only in internal table based on some condition. When I execute the report, for example MM60, there is a material number field for multiple selection.
the report should call the standard transaction and pass the values from the internal table to the multiple selection- material number of the standard transaction.
the standard transaction should never get executed automatically. Only the value should get passed from internal table to the standard t code. Please help.
regards,
ShankarHai
Go through the following Documents
SUBMIT rep.
Additions
1. ... LINE-SIZE col
2. ... LINE-COUNT lin
3. ... TO SAP-SPOOL
4. ... VIA SELECTION-SCREEN
5. ... AND RETURN
6. ... EXPORTING LIST TO MEMORY
7. ... USER user VIA JOB job NUMBER n
8. ... Various additions for parameter transfer to rep
9. ... USING SELECTION-SETS OF PROGRAM prog
Effect
Calls the report rep . Leaves the active program and starts the new report rep .
Addition 1
... LINE-SIZE col
Effect
Prints the report with the line width col .
Addition 2
... LINE-COUNT lin
Effect
Prints the report with lin lines (per page).
Addition 4
... VIA SELECTION-SCREEN
Effect
Displays the selection screen for the user. In this case, the selection screen is redisplayed after return from the report list display - the user's entries are retained.
Addition 5
... AND RETURN
Effect
Returns to the calling transaction or program after the called program has been executed. SUBMIT ... AND RETURN creates a new internal mode .
Addition 6
... EXPORTING LIST TO MEMORY
Effect
Does not display the output list of the called report, but saves it in SAP memory and leaves the called report immediately. Since the calling program can read the list from memory and process it further, you need to use the addition ... AND RETURN . Also, since the called report cannot be requested for printing, the addition ... TO SAP-SPOOL is not allowed here. You can read the saved list from SAP memory with the function module 'LIST_FROM_MEMORY' and then (for example) store it in the database with EXPORT . You can process this list further with the function modules 'WRITE_LIST' , 'DISPLAY_LIST' ... of the function group "SLST" .
Addition 7
... USER user VIA JOB job NUMBER n
Effect
Schedules the specified report in the job specified by the job name job and the job number n . The job runs under the user name user and you can omit the addition USER user . The assignment of the job number occurs via the function module JOB_OPEN (see also the documentation for the function modules JOB_CLOSE and JOB_SUBMIT . This addition can only be used with the addition ...AND RETURN .
Note
When scheduling a report with the SUBMIT ... VIA JOB job NUMBER n statement, you should always use the addition ...TO SAP-SPOOL to pass print and/or archive parameters. Otherwise, default values are used to generate the list and this disturbs operations in a production environment.
Addition 9
... USING SELECTION-SETS OF PROGRAM prog
Effect
Uses variants of the program prog when executing the program rep .
Note
Important
The programs prog and rep must have the same SELECT-OPTIONS and PARAMETER s. Otherwise, variants of the program prog may be destroyed.
Note
When using this addition, the specified variant vari of the program prog is taken in USING SELECTION-SET vari . On the other hand, all variant-related actions on the selection screen of rep (Get , Save as variant , Display , Delete ) refer to the variants of prog .
Example
SUBMIT REPORT01
VIA SELECTION-SCREEN
USING SELECTION-SET 'VARIANT1'
USING SELECTION-SETS OF PROGRAM 'REPORT00'
AND RETURN.
Effect
Executes the program REPORT01 with the variant VARIANT1 of the program REPORT00 .
Note
Runtime errors
LOAD_PROGRAM_NOT_FOUND : The specified program was not found.
SUBMIT_WRONG_TYPE : The specified program is not a report.
SUBMIT_IMPORT_ONLY_PARAMETER : Only one value passed to a report parameter.
SUBMIT_WRONG_SIGN : Invalid value passed to a selection with the addition SIGN .
SUBMIT_IN_ITAB_ILL_STRUCTURE : Table passed to a selection with WITH sel IN itab had an unexpected structure.
Try with this Example
Data: listobject like abaplist occurs 1 with header line.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1 .
IF sy-subrc <> 0.
message ID '61' TYPE 'E' NUMBER '731'
with 'LIST_FROM_MEMORY'.
ENDIF.
Thanks & regards
Sreenivasulu P -
How to get PERNR based on user ID
Hi All,
How to get PERNR based on userid.
please help me in resolving this.
Thanks for the support.
Regards,
Dhananjaya R Ehope this will help u
DATA: t_pernr LIKE pa0105-pernr,
t_email LIKE pa0105-usrid_long.
STEP 1 - Find personnel number for UNAME
SELECT SINGLE pernr
INTO t_pernr
FROM pa0105
WHERE subty = '0001'
AND endda >= sy-datum
AND begda <= sy-datum
AND usrid = p_uname.
Employee record found*
IF sy-subrc = 0.
STEP 2 - Find email address for personnel number*
SELECT SINGLE usrid_long
INTO t_email
FROM pa0105
WHERE pernr = t_pernr
AND subty = '0022'
AND endda >= sy-datum
AND begda <= sy-datum. -
How to get data for custom feilds for standard datasource
i have extracted CRM standard datasource 0CRM_OPPT_I.
In RSA6 i slected feilds which i want to trnasfer to B Iand i also added some custom feilds.
and then i went to RSA5 and i activated datasource.then i went to RSA3and i extracted.
In rSA3 selection screen all the custom feilds are selcted.
after extraction if i go to LIST,only some of the custom feilds data is displaying remaining feilds displayed as blank data
please tel me how to get data
Thanks in advance
HPHi Hari,
Sorry for late reply.
Once you have done the proper mapping by using the transaction BWA1
you need to write the BADI code which can be accesible from the following path:
Go to transaction SPRO
SAP Implementation guide ->Integration with other mySAP components ->Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM) ->
Settings for BW adapter->Execute Badi :BW adapter :Enhancement of datasources in messaging flow.
Select you the datasource enhancement implementation it will open the BADI Implementation..
go To interface tab and double click on the method..it takes you to the ABAP screen where you need to write the logic to populate the custom fields..
Please feel free to mail back if you have any quries.
All the Best..
Thanks
SK -
How to get Date value from database and display them in a drop down list?
Hello.
In my Customers table, I have a column with Date data type. I want to create a form in JSP, where visitors can filter Customers list by year and month.
All I know is this piece of SQL that is convert the date to the dd-mm-yyyy format:
SELECT TO_CHAR(reg_date,'dd-mm-yyyy') from CustomersAny ideas of how this filtering possible? In my effort not to sound like a newbie wanting to be spoonfed, you can provide me link to external notes and resources, I'll really appreciate it.
Thanks,
Rightbrainer.Hi
What part is your biggest problem?? I am not experienced in getting data out of a database, but the way to get a variable amount of data to show in a drop down menu, i have just messed around with for some time and heres how i solved it... In my app, what i needed was, a initial empty drop down list, and then using input from a text-field, users could add elements to a Vector that was passed to a JComboBox. Heres how.
package jcombobox;
import java.awt.*;
import java.awt.event.*;
import java.util.Vector;
import javax.swing.*;
public class Main extends JApplet implements ActionListener {
private Vector<SomeClass> list = new Vector<SomeClass>();
private JComboBox dropDownList = new JComboBox(list);
private JButton addButton = new JButton("add");
private JButton remove = new JButton("remove");
private JTextField input = new JTextField(10);
private JPanel buttons = new JPanel();
public Main() {
addButton.addActionListener(this);
remove.addActionListener(this);
input.addActionListener(this);
buttons.setLayout(new FlowLayout());
buttons.add(addButton);
buttons.add(remove);
add(dropDownList, "North");
add(input, "Center");
add(buttons, "South");
public void actionPerformed(ActionEvent e) {
if (e.getSource() == addButton) {
list.addElement(new SomeClass(input.getText()));
input.setText("");
} else if (e.getSource() == remove) {
int selected = dropDownList.getSelectedIndex();
dropDownList.removeItemAt(selected);
public void init(String[] args) {
setSize(400,300);
getContentPane().setLayout(new BorderLayout());
getContentPane().add(new Main());
}And that "SomeClass" is show here
package jcombobox;
public class SomeClass {
private String text;
public SomeClass(String input) {
text = input;
public String toString() {
return text;
}One of the things i struggled a lot with was to get the dropdown menu to show some usefull result. If the list just contains class references it will show the memory code that points to that class. Thats where the toString cones in handy. But it took me some time to figure that one out, a laugh here is welcome as it should have been obvious :-)
When the app is as simple as this one, using a <String> vector would have been easier, but this is just to demonstrate how to place classes in a vector and get some usefull info out of it, hope this answered some of your question :-)
The layout might have been easier to write, than using the toppanel created by the JApplet and then the two additional JPanels, but it was just a small app brewed together in 15 minutes. Please comments on my faults, so that i can learn of it.
If you need any of the code specified more, please let me know. Ill be glad to, -
How to display the sort value in the selection screen in the report title
Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun SHi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM -
How to add customize message on the variable selection screen in the query
Hi all,
Can we add an customise message on the variable selection screen in the query? If yes please let me know how it can be achevied?
Thanks,
RaniHi Rani,
I faced a similar issue (for what I understand your request is).
My requirement for the Variable Screen was to do:
1) place a link to a ppt file
2) remove buttons "Save", "Save As...), "Delete"... the standard buttons come when running the Query or WebTempl
We were using a Web Templ for BI7.0
I struggled trying to find out how to do it. My conclusions are:
- WAD, not sure we can accomplish it using a Web Template but i did not "play" a lot with the Web_Template Properties in order to know
- XHTML, I was told in my post HTML modification was the way, but I have close to nil background in HTML and couold not find the way of accessing the Variable Entry screen
For instance, I had to remove similar buttons and change some font size from a link on the Web Template (WAD), which was pretty straight forward. In WAD the buttons come with its own icon and to increase the Font size for that link we used XHTML (<font size="2" >). But the heck of the variable screen...well, i just did not get trhough to it to modify it in any way.
Good luck,
Definetly in a Query I would say that no.
alex
PS: If anyone had a better insight, please feel free to share it.
Maybe you are looking for
-
Hi there I'm getting the following error running 6.0.5 on Windows 2003 SP1, any ideas? Event Type: Error Event Source: Application Error Event Category: (100) Event ID: 1000 Date: 19/07/2006 Time: 21:25:30 User: N/A Computer: xxxxxxx Description: Fau
-
DBMS_METADATA package issue
All, When I use the DBMS_METADATA.GET_DDL('INDEX',indexnm) package, I am getting the entire DB spcecifications as follows CREATE INDEX "T_OD"."XIE3OD_ORDER" ON "T_OD"."OD_ORDER" ("ORD_MNT_DTM") PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS ST
-
Forgot pass code so I backed up, updated and now won't restore because icloud is open. I cant get in to turn it off! Help
-
I lost all my fast dial saved places...where did they go?
the question explains it all!
-
Error in DTP load from PSA to IC - Error - Key figure 0 not allowed for
HI ALL, ERROR - Key figure <> 0 not allowed for unit ' '; see long text Diagnosis The unit/currency ' Source unit MEIN ' with the value 'space' is assigned to the key figure ' Source Key Fig. DIFF ' with the value ' 4240.000- '. System Re