How to get data from MS Access?
How can select data from MS Access datafile, stored on some computer in local network? How to connect Oracle database to MS Access datafile? I tried use ODBC, but unsuccefull. Any idea? Some link to some guide?
mihaelradovan wrote:
How can select data from MS Access datafile, stored on some computer in local network? How to connect Oracle database to MS Access datafile? I tried use ODBC, but unsuccefull. Any idea? Some link to some guide?How were you "unsuccessful"?
You set up an ODBC connection to the MS Access file, then use Oracle Heterogeneous services and configure those to point to the ODBC connection and use that.
Here's an example I already have for an MS Excel file...
1- Go to Control Panel>Administrative Tools>Data Sources (ODBC)>System DSN and create a data source with appropriate driver. Name it EXCL.
2- In %ORACLE_HOME%\Network\Admin\Tnsnames.ora fie add entry:
EXCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.12.0.24)(PORT = 1521))
(CONNECT_DATA =
(SID = EXCL)
(HS = OK)
Here SID is the name of data source that you have just created.
3- In %ORACLE_HOME%\Network\Admin\Listener.ora file add:
(SID_DESC =
(PROGRAM = hsodbc)
(SID_NAME = <hs_sid>)
(ORACLE_HOME = <oracle home>)
under SID_LIST_LISTENER like:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = d:\ORA9DB)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ORA9DB)
(ORACLE_HOME = d:\ORA9DB)
(SID_NAME = ORA9DB)
(SID_DESC =
(PROGRAM = hsodbc)
(SID_NAME = EXCL)
(ORACLE_HOME = D:\ora9db)
Dont forget to reload the listener
c:\> lsnrctl reload
4- In %ORACLE_HOME%\hs\admin create init<HS_SID>.ora. For our sid EXCL we create file initexcl.ora.
In this file set following two parameters:
HS_FDS_CONNECT_INFO = excl
HS_FDS_TRACE_LEVEL = 0
5- Now connect to Oracle database and create database link with following command:
SQL> CREATE DATABASE LINK excl
2 USING 'excl'
3 /
Database link created.
Now you can perform query against this database like you would for any remote database.
SQL> SELECT table_name FROM all_tables@excl;
TABLE_NAME
DEPT
EMPOr refer to this Article...
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4406709207206
Similar Messages
-
HOW TO FILTER DATA FROM MICROSOFT ACCESS
HOW TO FILTER DATA FROM MICROSOFT ACCESS BASED ON DATE AND TIME AND GIVE THE RESULT TO A TABLE ?
I need some example files , can anybody please help me ?
Solved!
Go to Solution.Just be sure to get examples specific to the Jet DBMS. It is rather "idiosyncratic" when dealing with time and date values.
One question: the timestamp is being saved in a datetime field, right?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
How to get data from a USB-UIRT device using Labview?
How to get data from a USB-UIRT device using Labview?
I'm trying to get data from a USB-UIRT device, is it posible with Labview?
I really appreciate your help,
thanksYou may want to contact the developer of the device for the API and DLL.
http://65.36.202.170/phpBB2/viewforum.php?f=3 -
i have three tables A,B,C. there is one to many relation between A and B. and one to many relation existed between table b and c . how will get data from these three tables
check if this helps:
select * --you can always frame your column set
from tableA a
left join tableB b on a.aid=b.aid
left join tableC c on c.bid=b.bid
This is just a general query. However, we can help you a lot more, if you can post the DDL + sample data and required output.
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
Anyone knows about using java to get data from MS Access database.
hi there
anyone knows about using java to get data from MS Access database? thank youthere is a list of jdbc drivers at:
http://industry.java.sun.com/products/jdbc/drivers
they have several ms access drivers listed.
also, you can use a jdbc-odbc bridge which allows you to use jdbc to connect to any odbc data source:
http://java.sun.com/j2se/1.3/docs/guide/jdbc/getstart/bridge.doc.html -
How to migrate data from MS Access to Oracle???????
how to migrate data from MS Access to Oracle???????
You can use heterogeneous services (HS) connection to MS-Access from Oracle and still use the same PL/SQL (or even a single CTAS statement) or SQL to load directly to Oracle tables. It's transparent, quick and clean as opposed to writing complex control files.
You might have to set the ODBC connection to your Access database and add the details to Oracle listener.
Please let me know if you are not sure how to set up the connection. -
How to get data from external source
Hi experts,
I want to get data from a different source e.g. from oracle. How can i get the data in BW??
SamHi Samir
there are different interfaces are available according to the source system.
For Oracle source system you can use DB connect interface.
you can extract data from several data sources to BI
File Interface:: Using this interface, you can access files in ASCII format or CSV format
DB Connect :: You use DB Connect to open other database connections in addition to the default connection and use these connections to transfer data from tables or views into a BI system.
UD Connect :: UD Connect (Universal Data Connect) uses the Application Server J2EE connectivity to enable the reporting and analysis of both SAP and non-SAP data. Using UD Connect, you can access all relational and multidimensional data sources. UD Connect transfers the data as flat data.
BI Service API ::
Web Service for Staging ::You use the Web service to write the data from the source into the PSA. The transfer of data is controlled externally, without placing demand on BI.
You can use this interface in conjunction with real-time data acquisition.
Please assign points if this info helps.
Regards
Vivek.. -
How to get data from subsites list of SharePoint 2010 in ssrs
Hi,
Can someone help me on this issue.
I want to create a report using ssrs, I have some of the data in SQL and some of the data in sharepoint list.
First I need to go to SQL and get the data from the table which contains URL for the subsite in sharepoint.
after that I need to go to all the subsites and go to perticulat list in the subsites and get data from that list.
for example, their is a top level site "abc"
it contains sub site "123", "456","567", etc.. All this sub sites contain a list by name "Sample List", Now I need to go to that sub site list(Sample List) and get list-item column say "created By" which
is created on particular date.
in my report, I need to print the sub site "url/Title" which comes from SQL database and list-item column "Created By" of that sub site list "Sample List".
I tried using subreport inside a report by using "Microsoft SharePoint List" as a datasource, but when it comes to real time we don't know how many subsites will be created, so we can't create a datasource for each subsite site.
I guess we need to be using XML as a datasource, but how can we go to particular subsite in query while using XML, since all subsites have list with the same name ?
I appreciate your help.
Thank you,
KishoreHi Kishore,
SQL Server Reporting Services(SSRS) supports expression-based connection strings. This will help us to achieve the goal you mentioned in this case:
Create a new report
Create a Data Source in the report with the connection string like this:
http://server/_vti_bin/lists.asmx (We use static connection string instead of expression-based connection string now, as it is not supported to get fields based on expression-based connection string in design time. We will change it to be expression-based
connection string later)
Create the data set(as you have done using XML query language). Please use list name instead of GUID in the listName parameter.
Design the report(e.g. Add controls to the report)
Now, let's change the connection string to be expression-based. First, please add a parameter to the report, move this parameter to top. This parameter is used to store the sub site name.
Open the Data Source editor, set the connection string to be: ="http://server/" & Parameters!parameterCreatedInStep5.value & "_vti_bin/lists.asmx"
In the main report, pass the sub site name to the report we created above via the parameter created in step5
That is all.
Anyway, this is actually a SQL Server Reporting Service(SSRS) question. You can get better support on this question from:
http://social.technet.microsoft.com/Forums/en/sqlreportingservices/threads
For more information about Expression-Based connection string, please see:
http://msdn.microsoft.com/en-us/library/ms156450.aspx#Expressions
If there is anything unclear, please feel free to ask.
Thanks,
Jinchun Chen
Jin Chen - MSFT -
How to get data from Oracle using Native SQL in SAP.. Problem with date
Hi Masters.
I'm trying to get data from an Oracle DB. I was able to connect to Oracle using tcode DBCO. The connetion works fine
I wrote this code and it works fine without the statement of where date > '01-09-2010'
But i need that statement on the select. I read a lot about this issue, but no answer.
My code is (this code is in SAP ECC 6.0)
DATA: BEGIN OF datos OCCURS 0,
id_numeric(10),
component_name(40),
comuna(10),
record_id(10),
status,
sampled_date(10),
END OF datos.
DATA: c TYPE cursor.
EXEC SQL.
connect to 'LIM' as 'MYDB'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'MYDB'
ENDEXEC.
EXEC SQL PERFORMING loop_output.
SELECT ID_NUMERIC, COMPONENT_NAME, COMUNA, RECORD_ID, STATUS, SAMPLED_DATE
into :datos from lims.SAMP_TEST_RESULT
where date > '01-09-2010'
ENDEXEC.
EXEC SQL.
disconnect 'MYDB'
ENDEXEC.
How can i get the data from that date?? If i delete the where statemet, the program works well, it takes 30 mins and show all the data, I just need the data from that date.
Any help
RegardsPlease refer the example in this link which deals with Oracle date format.
You can finnd a command DECODE which is used for date formats. If you have a look at whole theory then you will get an idea.
Link:[Bulk insert SQL command to transfer data from SAP to Oracle|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bulk-insert-sql-command-to-transfer-data-from-sap-to-oracle-cl_sql_connection-3780804] -
How to get data from a table in a condition between twomonth
hai friends
I have a query that is i want to get data from a table based on a condition between two months in a format of char column
Ex
I have a column called from_month in the format of 'mon/yyyy'(already converted from date')
then the second column is to_month in the same format 'mon/yyyy'
now i wiil select from_month and to_month like
from month jan/2009
to month mar/2010
how to use between of two months in the format of char.Please tell me how to get two different month between data.Hi,
This may be of help.
Remember Pointless has made a point ;) (worth millions)
If possible , DO NOT store dates as strings or numbers.Let dates be dates.
WITH dat AS
(SELECT ' THIS IS JAN' x,to_char(to_date('01-JAN-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS FEB' x,to_char(to_date('01-FEB-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS MAR' x,to_char(to_date('01-MAR-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS APR' x,to_char(to_date('01-APR-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS MAY' x,to_char(to_date('01-MAY-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS JUN' x,to_char(to_date('01-JUN-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS JUL' x,to_char(to_date('01-JUL-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS AUG' x,to_char(to_date('01-AUG-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS SEP' x,to_char(to_date('01-SEP-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS OCT' x,to_char(to_date('01-OCT-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS NOV' x,to_char(to_date('01-NOV-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual)
SELECT * FROM dat
WHERE to_date(y,'mon/yyyy') BETWEEN to_date('01 jan 2009','dd mon yyyy') AND to_date('01 mar 2009','dd mon yyyy')Cheers!!!
Bhushan -
How to get data from a file?
Hello everyone, i'm new to this forum and to java too. Ok, so here is what i want to do:
I want to get data from a file containing words and numbers and store them into variables that i will use them after to insert into a database table. For example i have a file called employees.txt in this form:
eid ename zipcode Hire_date
1000 "Jones" 67226 "12-DEC-95"
In C++ i declare variables for each data and store them, for example in this case:
ifstream in("somefile");
string name, hdate;
int eid, zip;
in >> eid >> ename >> zip >> hdate;
So i want to do the same thing in JAVA but i can't make it work. So, i would appreciate if someone could give me a simple example how to do it. Thank you.[http://java.sun.com/docs/books/tutorial/essential/io/index.html]
-
How to get data from PDF form?
PDF forms can send data in url like GET or POST method. Is it possible to get data from url, like in PHP http://sever/file.php?item1=value1&item2=value2&item3=value3
In APEX url have specific construction and I don't know how to get value of items (1...3)
Please let me help to find simple method of geting data from URL.
Best Regards,
MarkThe APEX URL syntax is detailed here
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/concept.htm#BCEDJBEH
How to get it from PDF is another matter...
I'm working on an app that downloads PDFs with a Large amount of data as a blob, takes that blob and changes it to XML, then goes through the xml to validate each section of data and then add it into the schema that my apex app is referencing....
I didn't write the original code but I do know that it isn't a quick thing to implement and includes using some uploading some java jar files to your schema and writing some custom java code.
Someone else may be able to help with grabbing PDF data into the URL for the amounts of data you want to pass to apex.
Gus..
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!
Edited by: Gussay on Sep 21, 2009 5:52 PM -
Any helpful materials or sample on how to get data from lotus in SAP?
I have some experience on get data from Biztalk (Microsoft Middleware). In that case, i could using "call FMxxxx DESTINATION rfc". the destination with type TCP/IP is created via SM59.
and how about lotus ?
thsI have some experience on get data from Biztalk (Microsoft Middleware). In that case, i could using "call FMxxxx DESTINATION rfc". the destination with type TCP/IP is created via SM59.
and how about lotus ?
ths -
Without NI DAQ device- how to get data from MSP into labVIEW and process it
Hi,
I do not have an NI DAQ device. I have an MSP430 and my sensor is an ADXL335 Accelerometer. How do I get data from my MSP into labVIEW and process it?
Just looking for a nudge in the right direction. I'm having a hard time finding resources on labVIEW that don't involve NI specific DAQs.
Thanks in advance,
AzizThere are many ways to get data into LabVIEW that do not involve NI-DAQ devices.
I think your easiest option would be to stream it via serial port if the data rate isn't too fast.
Troy
CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
Beware of the man who won't be bothered with details. - William Feather
The greatest of faults is to be conscious of none. - Thomas Carlyle -
How to extract data from MS-Access
Hi Experts,
I have a scenario where I have to extract data from MS-Access.
I'm developing a ABAP component.
I looking for help in writing query for data extraction. I have no idea of extracting data form MS-Access.
Have worked on BAPI and SAP tables to extract data but not in MS-Access.
Can anyone help me out to pull data from MS-Access and use those data in ABAP?
Thanks in advance,
subaHi Sushma,
how to configure sendor JDBC adapter ..
Select adapter type is JDBC..
Give the Transport Protocol:.JDBC 2.0 (Example)............
Message Protocol:...JDBC...........
IAdapter Engine : Integration Server
Processing Parameters..
Quality of service.....(Example)..Exactly once
Poll Interval .... Example ..10
Query Sql statement..Example ..select * from XXXXX
Document Name.....
Update Sql stetement.....
Thanks,
Satya
Reward points if it id useful...
Maybe you are looking for
-
InDesign crashes every time I export to interactive PDF??
I am using InDesign CS6 on Windows 7 professional. I have restarted the computer several times. CS6 is all up to date. I have experimented on several existing documents as well as brand new documents. It makes no difference. Interestingly, InDesign D
-
How can I create a pdf file from an existing word file?
I have a valid account on adobe but I can´t create a pdf.... What should I do?
-
Camera in not found after Yosemite upgrade.
2012 Macbook Pro Things we have already tried. (Several times) First - find out if the computer recognizes the camera. Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight c
-
Can Airport Extreme log all websites?
I am a parent looking to monitor Internet usage for my family. Ideally I would like the ability to log all URL's visited through the router and track problem sites to a specific device, date, and time. I've read that some routers allow for this. I
-
How to move the banners from the upper right corner to the low right corner of the screen on Mac (Mavericks)? Sometimes, when I am about to click something in the upper right corner, the banners stand in the way. It is very annoying. However, I still