How to get default presets to the left panel
I finally installed lightroom 3 after many, many months of it sitting on my desk. I have been watching tutorials, and playing around with it, and I have found that the default presets are only on the right side panel in library. On the left panel in develop the heading presets shows up but when I click on the triangle nothing shows up under them. I did see a question already on here to right click on the heading and check it which I did a few times just to see if it would work and nothing. This is very frustrating because I have to click on each preset and undo it if I don't like it. Please help.
Hello!
When I left clicked in the spot shown below,
This field is shown (shown below). As you can see the preset menu is checked, thus the presets being shown.
Is this what you are referring to? when you left click nothing is shown, and nothing is listed under presets?
janelle
Similar Messages
-
How to get Default Role fron the EmployeeInfo
How i can get the default role from the EmployeeInfo object ?
When you search for "default role" in the SDK Helpcenter you will find that the Type property keeps this information...
I have to admit though that this is far from being intuitive
I only found it through checking the SQLs in MS SQL Profiler though. -
In the new Mavericks OS, when I use Pages, I cannot find a way to get a ruler on the left side of the document. When I click on "Show rulers," all I get is a ruler at the top of the document. How can I get a ruler on the left side?
Wait for an Apple update to Pages which is suppose to put the vertical ruler feature back in.
-
How to get default values while using the transaction "BP"
Hi Group,
I have a query on how to get default values while using the transaction <b>BP</b>?
The thing is:
when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
how can I achieve this?
So please kindly let me know the procedure to achieve this.
Thanks & Regards,
Vishnu.Hi,
The events of BDT can be used to default some fields on creating a partner.
For this create a function module for ISDAT. attach that event in BUS7.
In the ISDAT funtion modulethe following code should be used.
For example to set the nationality:
I_BUSDEFAULT-NATIO = 'DE.
CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
EXPORTING
i_busdefault = I_BUSDEFAULT
Regards, Smita. -
How do I get page numbers on the left and right side of the page?
I am finishing up a book in PAGES '08 on my Mac.
How do I get page numbers on the left and right side of the page.
I can get them on the page but I'd like them on the left and right sides.
EvanIf the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
Control (right) - click on the open dmg icon and select "Eject xxxx" from the contextual window.
Then find the actual dmg file associated with those icons
and drag to the Trash in the Dock and empty. -
How to get maximal value from the data/class for show in Map legend
I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomouse this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01 -
Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c drive, or get the itune to open my old c drive when I log in.
might be some help on one of these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
Cheers, Tom -
How do I expand the left panel to see more of my folder names?
Or (alternatively), how do I hide (but not delete) upper-level folders so that my folder names don't get cut off? Here's a screen shot:
gatorjim2000 wrote:
In a word or two, you can't. You can drag the border between the left panel and the viewing area to enlarge the panel, but it only goes so far.
That's not quite true.
You can use Jeffrey's tool to expand the maximum width of the panels, and use narrower fonts if you want:
http://regex.info/Lightroom/Config/ -
How to get two parameters in the same line of selection screen?
hello
i need to get my selection csreen like bellow.
r1 radiobuttion -some space --p1 parameter
i should not get the parameter in the next line of radiobuttion.
how to get two parameters in the same line of selection screen?hi....
modify the following code
it will work
SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) TEXT-001
FOR FIELD P1.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS : P1 TYPE C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
P2 TYPE SCARR-CARRNAME,
P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SL1. -
How to get Drafts Mailbox at the top rather than in ON MY MAC
My wife is switching from Entourage to Mail and I can't get her set up the same as I have been in Mail for years. At the top of the left panel I have Inbox, Drafts, Sent and Trash, with sub listings for each of my mail accounts, followed by SMART MAILBOXES and ON MY MAC. My wife has the same except for the Drafts and its sub listings. Instead, she has several Drafts Mailboxes (1 for each email account) under ON MY MAC. How do I get Drafts at the top as I have it?
Then it may be that by some action, some existing Drafts mailboxes were found, and Mail moved them to the On My Mac section.
Has she yet in Mail composed a message, clicked on Save as Draft before sending, and checked to see if that has been saved in newly created Draft mailbox in the location you expected?
Ernie -
Someone very kindly helped me to stop my emails being received in triplicate but I see I now am getting more popstat files appearing although the emails are not being duplicated. Does anyone know how I can stop this please. Many thanks
Can you explain in more detail what 'keep getting popstat files on the left' means?
-
i deleted most visited, latest headlines, getting started, yahoo, youtube, apple in mozilla's folder,how to get it back like the first time i installed? thx
if you hid the menu bar and the navigation bar simply press the alt button, this will bring back the menu bar and form there you can right click and select which bars you want shown
-
How to get Open Balance for the year and Total Ending Balance?
For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM -
This spring we changed from IE to Mozilla after upgrading to Win 7. Everything has been fine with Firefox until yesterday when it crashed when I attempted to open an email. Since then the bookmarks (or favorites as my husband calls them) have not been in their usual place which was along the left side of the page. They are located in the Bookmarks bar at the top of the page but husband prefers the old IE way which we had until yesterday PM. Is there any way that we can get them back to the left side of the page other than going back to IE? Now that I have gotten used to Firefox I like it just fine.
*You can open the Bookmarks in the sidebar via View > Sidebar > Bookmarks (Ctrl+B)
*You can open the History in the sidebar via View > Sidebar > History (Ctrl+H)
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.
You can find toolbar buttons to open the bookmarks (star) and the history (clock) in the sidebar in the toolbar palette and drag them on a toolbar.<br />
Firefox 4 versions and later have two bookmark buttons with a star in the Customize window.<br />
One star button has a drop marker that open a Bookmark menu.<br />
The other star button without the drop marker opens the bookmarks in the sidebar.<br />
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing -
How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)
Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then.
Maybe you are looking for
-
Invalid object name 'fn_rbac_GS_LocalAdminMembers0' while creating a report
I'm getting this error while trying to create a report in Report Builder. this came about as a result of trying to create a report showing all of the members of the local admin, and a response in that thread indicated that this function should exist
-
TS3989 how can i see photos in iCloud?
how can i see the photos from photo stream on icloud.com?
-
TS1363 Iphone just shows the apple and blinks on and off.
Iphone just shows the apple and blinks on and off.
-
On my virtual machine with Windows 7 32-bit and internet Explorer 11 I was testing a webpage with an old Java applet which is hosted on one of our servers. I opened the page and got the Java message 'Application blocked by security settings'. I added
-
Total Volume of HU Packaging materials/Containers not being updated
Hello Guys, I've just noticed that when a pack some materials or sub HU into another HU (packaging materials/containers), its total volume is not being updated. Well I assume that the total volume must be the sum of the volume of its contents right?