How to get default settings

I bought a new lumix camera. to play video I had to download quicktime on a provided disk. the first time I did it it gave me an option to make quicktime my default program which it did . It took over my picture files which I didn't like so I uninstalled it. On reinstall I was no longer given any options about default settings. I've tried multiple times and still no luck. any ideas what to try? I just want quicktime to play my camera videos

Window > Workspace > Default
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
kapowd wrote:
> Hi again,
>
> I have located the workspace option under the view
button. If I click it or
> click off of it, the size changes a little bit but the
orientation is still
> screwy. My work area, that used to be under my timeline
is now on the left.
> It looks like it is outside of the work area. I am sorry
for the terminology.
> I can send you a picture of my screen if that would
help.
>
> Thanks again,
>
>
>

Similar Messages

  • How to get default values while using the transaction "BP"

    Hi Group,
    I have a query on how to get default values while using the transaction <b>BP</b>?
    The thing is:
    when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
    how can I achieve this?
    So please kindly let me know the procedure to achieve this.
    Thanks & Regards,
    Vishnu.

    Hi,
    The events of BDT can be used to default some fields on creating a partner.
    For this create a function module for ISDAT. attach that event in BUS7.
    In the ISDAT funtion modulethe following code should be used.
    For example to set the nationality:
    I_BUSDEFAULT-NATIO = 'DE.
    CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
    EXPORTING
    i_busdefault = I_BUSDEFAULT
    Regards, Smita.

  • SAPMMC All Settings Gone after running CCCleaner , How to get all settings

    Hello All
    SAPMMC All Settings Gone after running CCCleaner , How to get all settings back .
    I donot know what is SID ( System ID ), Instance etc.
    If this is not relevant to this forum plz let me know which forum ....
    Regards
    Rohit

    Turns out those error messages it gave me were because it didn't sync properly and create a backup. Which is why when I restored from backup it didn't reload my old info. Instead of assuring me that I would have the option to restore my info, it would have been nice had it told me that a backup hadn't been completed and that restoring my phone without it would leave me with nothing.
    Tech support had me use my old SIM card to import my old contacts. This worked, but I've entered contacts since getting the new phone that aren't on my old SIM. And doing so left me with a bunch of re-organizing to do (deleting, combining, entering First and Last name fields...) it took me several hours.
    I didn't get my appointments back, cause my old phone was just a phone, and that info wasn't on the old SIM, but I'm REALLY glad I got my contacts.

  • When & how to use default settings option in job scheduling with BO 4.1

    Hi,
    With BO 4.1 we got new features and one of them is "Default Settings" option in the job scheduling. While scheduling a report in CMC we are getting below attached screen. I want to know when and how to use this option? while scheduling job on queries.
    Please guide me to, thanks in advance.
    Regards,
    Mithun Pati.

    Hi Mithun,
    Below thread may give you clear idea.
    The Purpose of the default settings is to have customized default settings for the enterprise. These settings would apply to any user who has access to Info view and wants to schedule a report. For example you can setup default values for "From" section of email so any scheduled reports use those settings. Similarly another setting we have defaulted is the number of retires involved and the seconds for each retry. Business Objects will not send out a failure emails unless the last retry has failed. The default settings should only be modified by an admin.
    Purpose of Default Settings when scheduling a WebI report?

  • How do restore default settings in FCPX Compressor?

    How do I restore FCPX Compressor default settings. I lost them when adding a few custom settings.

    First, the B for Bold, I for Italics, etc, that you see above, often do not work, so you'll probably just see plus marks around some of the words below. Please play like these words are italicized since in reality these functions don't work consistently.
    I said.... +“she can't get a menu to come up for her Dock icons.”+ To spell that out.... when she chooses an Icon on the Dock, say for example, Address Book, then taps the touchpad with two fingers, no menu comes up, meaning the menu that gives you options, such as ‘quit’. I can't find what controls that function (the function that brings up that menu).
    I said she.... +“got excited about changing all the settings.... now it's all we can do to see the pages on her screen....”+ That means she went into System Preferences and changed color/screen/display/etc and all kinds of other settings that makes anything on-screen hard to see.
    I’d rather not have to try to find all the settings she changed and then change them back to the original settings. I thought there was a +restore to original settings+ on the computer. If there’s not, so be it. Spotlight couldn’t find one.

  • How to get default lay out set in my ALV out put.

    I need to have default layout in my ALV output.
    My functional consultant idea was to make sure they have an ALV variant selected. 
    When he first run the program, how will need to  get a "/DEFAULT" variant created.
    How can I do that ?
    Initialization - For ALV variant
    INITIALIZATION.
      ws_repid = sy-repid.
      g_save  = 'A'.
      CLEAR g_variant.
      g_variant-report = ws_repid.
    Get default variant.
      gx_variant  = g_variant.
      gx_variant = g_variant.
      CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
        EXPORTING
          i_save     = g_save
        CHANGING
          cs_variant = gx_variant
        EXCEPTIONS
          not_found  = 2.
      IF sy-subrc = 0.
        p_vari = gx_variant-variant.
      ENDIF.
    &--F4 HELP - FOR ALV VARIANT GET--
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
      CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
          EXPORTING
            is_variant = g_variant
            i_save     = g_save
          IMPORTING
            e_exit     = g_exit
            es_variant = gx_variant
          EXCEPTIONS
            not_found  = 2.
        IF sy-subrc = 2.
          MESSAGE ID sy-msgid TYPE 'S'      NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ELSE.
          IF g_exit = space.
            p_vari = gx_variant-variant.
          ENDIF.
       ENDIF.
    &--AT SELECTION-SCREEN.- For ALV Variant--
    AT SELECTION-SCREEN.
    *Getting variant Existence
      PERFORM get_exist_variant.
    *&      Form  GET_EXIST_VARIANT                                        *
          text                                                           *
    FORM get_exist_variant .
      IF NOT p_vari IS INITIAL.
        MOVE g_variant TO gx_variant.
        MOVE p_vari TO gx_variant-variant.
        CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
          EXPORTING
            i_save     = g_save
          CHANGING
            cs_variant = gx_variant.
        g_variant = gx_variant.
      ELSE.
        CLEAR g_variant.
        g_variant-report = ws_repid.
      ENDIF.
    ENDFORM.                    " GET_EXIST_VARIANT
    *&      Form  alv_display                                              *
    This subroutine is to display the out put in ALV.                    *
    FORM alv_display .
    Local data
      DATA: y_x          LIKE boole  VALUE 'X'.
      DATA: lh_index     LIKE lf_fieldcat-col_pos.
    For variant
    DATA: ws_repid LIKE sy-repid,
          g_save TYPE c VALUE 'A',
          g_exit TYPE c,
          g_variant LIKE disvariant,
          gx_variant LIKE disvariant.
      For 1st field.( RPT_LOC )
        CLEAR lf_fieldcat.
        lf_fieldcat-fieldname = 'RPT_LOC'.
        lf_fieldcat-tabname = 'GT_ZGXMIT_L'.
        lf_fieldcat-ref_tabname = 'ZGXMIT'.
        lf_fieldcat-ref_fieldname = 'RPT_LOC'.
        lh_index = lh_index + 1.
        lf_fieldcat-col_pos = lh_index.
        lf_fieldcat-key = y_x.
        lf_fieldcat-no_sum = y_x.
        APPEND lf_fieldcat TO lt_fieldcat.
    For 2nd field.( BAL_XMIT )
        CLEAR lf_fieldcat.
        lf_fieldcat-fieldname = 'BAL_XMIT'.
        lf_fieldcat-tabname = 'GT_ZGXMIT_L'.
        lf_fieldcat-ref_tabname = 'ZGXMIT'.
        lf_fieldcat-ref_fieldname = 'BAL_XMIT'.
        lh_index = lh_index + 1.
        lf_fieldcat-col_pos = lh_index.
        lf_fieldcat-key = y_x.
        lf_fieldcat-no_sum = y_x.
        APPEND lf_fieldcat TO lt_fieldcat.
    4,5,....fields appening
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
            i_callback_program                = ws_repid
          I_CALLBACK_PF_STATUS_SET          = ' '
           i_callback_user_command           = 'USER_COMMAND'
          I_CALLBACK_TOP_OF_PAGE            = ' '
          I_STRUCTURE_NAME                  =
          I_BACKGROUND_ID                   = ' '
          I_GRID_TITLE                      =
          I_GRID_SETTINGS                   =
          IS_LAYOUT                         = v_alv_layout
           it_fieldcat                       = lt_fieldcat
          IT_SORT                           =
          IT_FILTER                         =
          IS_SEL_HIDE                       =
          I_DEFAULT                         = 'X'
           i_save                            = 'A'
          IS_VARIANT                        =
           it_events                         = events[]
          IT_EVENT_EXIT                     =
          IS_PRINT                          =
          IS_REPREP_ID                      =
           TABLES
                t_outtab                 = gt_zgxmit_l
           EXCEPTIONS
                program_error            = 1
                OTHERS                   = 2.
        IF sy-subrc <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    ENDFORM.                    " alv_display

    Hello SAm,
    U have to set like   DATA: IT_VARIANT LIKE DISVARIANT,
            G_S_SORT  LIKE LINE OF IT_SORT.
      DATA : G_R_DISP_VARIANT TYPE DISVARIANT.
      SORT G_T_OUTTAB BY PSPID POSID.
      CLEAR: G_R_DISP_VARIANT.
    For storing the variant layout
      IT_VARIANT-REPORT  = SY-REPID.
      IF NOT P_VARIAN IS INITIAL.
        G_R_DISP_VARIANT-VARIANT = P_VARIAN.
      ELSE.
        IT_VARIANT-VARIANT = '/Z48M'.
      ENDIF.
      CLEAR G_T_OUTTAB.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
                I_CALLBACK_PROGRAM = IT_VARIANT-REPORT
                I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
                IT_FIELDCAT        = IT_FIELDCAT
                I_SAVE             = 'A'
                IS_VARIANT         = IT_VARIANT
               IS_LAYOUT          = IT_LAYOUT
                IT_SORT            = IT_SORT[]
           TABLES
                T_OUTTAB           = G_T_OUTTAB
           EXCEPTIONS
                PROGRAM_ERROR      = 1
                OTHERS             = 2.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    If u want F4 help in the selection screen then do like this.
    SELECTION-SCREEN BEGIN OF BLOCK VARIANT WITH FRAME TITLE TEXT-013.
    PARAMETERS:  P_VARIAN LIKE DISVARIANT-VARIANT DEFAULT '/STANDARD'.
    SELECTION-SCREEN END OF BLOCK VARIANT.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARIAN.
      PERFORM SHOW_EXISTING_DISPLAY_VARIANTS.
    FORM SHOW_EXISTING_DISPLAY_VARIANTS.
      DATA: G_R_DISP_VARIANT TYPE DISVARIANT.
      G_R_DISP_VARIANT-REPORT = SY-REPID.
      CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
           EXPORTING
                IS_VARIANT    = G_R_DISP_VARIANT
                I_SAVE        = 'A'
           IMPORTING
                ES_VARIANT    = G_R_DISP_VARIANT
           EXCEPTIONS
                NOT_FOUND     = 1
                PROGRAM_ERROR = 2
                OTHERS        = 3.
      IF SY-SUBRC = 0.
        P_VARIAN = G_R_DISP_VARIANT-VARIANT.
      ENDIF.
    ENDFORM.                               " SHOW_EXISTING_DISPLAY_VARIANTS
    If useful reward.
    Vasanth

  • How to get default color of a selected row in a JLIst

    I have a JList that I am changing the font color for based on a certian situation so I created my own MyCellRenderer to do this. However, when I select an item in the list the row is no longer highlighted. I used the isSelected method to determine if a row was selected and then change the background color of that row. However, I would like the color to be the default color that you get when you select a row in a default JList. I can't seem to figure out how to get that color. How do I obtain what that color is? I found an example where you can get the default color for the background of a button and use that color so I would guess it is something similar to that. My code is below so I hope someone can tell me how to get that color that I want.
    Thanks...Chris
    class MyCellRenderer extends JLabel implements ListCellRenderer {
         public MyCellRenderer() {
              setOpaque(true);
         public Component getListCellRendererComponent(
             JList list,
             Object value,
             int index,
             boolean isSelected,
             boolean cellHasFocus)
             int index1 = value.toString().indexOf("-");
               String errors = value.toString().substring(index1 + 1, index1 + 6).trim();
             int numErrors = Integer.parseInt(errors);
               if (numErrors > 0)
                      setForeground(Color.red);
                      setBackground(Color.white);          
             else
                  setBackground(Color.white);
                  setForeground(Color.black);
             if(isSelected)
                  //ColorUIResource col = (ColorUIResource)UIManager.getDefaults().get("JButton.background");
                  ColorUIResource col = (ColorUIResource)UIManager.getDefaults().get("Button.background");
                  setBackground(col);
             setText(value.toString());
             return this;
    }

    Swing related questions should be posted in the Swing forum.
    I would like the color to be the default color that you get when you select a row in a default JList. I can't seem to figure out how to get that colorlist.getSelectionBackground();

  • How to get Default Activity(Infotype 0315) using BAPI

    Hi Everyone,
    I have a task to get Default Activity by Personal number for my third party application. Unfortunately function HR_READ_INFOTYPE is not allowed for Remote Call.
    Is there any simple way how to get this value from system using BAPI? E.e. using RFC_READ_TABLE function(but i don't know table name ).
    Thanks,
    Roman.

    Table -> PA0315        Field ->LSTAR (Activity Type)
    Class :CL_HRPT_INFOTYPE_0315
    You can also use FM "CATS_GET_INFOTYPE_0315" RFC Enable
    Good luck !
    ~Saquib

  • How to get default values on selection screen(multiple ranges)?

    i want to know how to maintain default ranges in selection screen...like 2000 to 3000 and 7000 to 8000 and 11000 to 15000
    all the above ranges must get by default how to provide those to selection screen by default...please give me idea...with example...

    Hi Suresh,
    You can either use select-options or Ranges. If you want the selection screen to be displayed with allwoing user to enter values apart for the default ones use select options else use ranges. With ranges what ever values use hard code would be set and the end user will not be able to add any more values (or range of values).
    Simply write the following code
    tables : <name of the table from which the field belongs>
    select-options <fieldname> for <tablename>-<fieldname>.
    <fieldname>-sign = 'I'.
    <fieldname>-option = 'BT'.
    <fieldname>-low = '7000'.
    <fieldname>-high = '8000'.
    append <fieldname>..
    similiarly add all the ranges that you need to include as default and in your select statement use the IN operator inthe where clause to include the range.
    If using range replacethe select-option with the range statement.
    Thanks.

  • How to get Default (System) Date Format Pattern?

    How to get system default date format which is defined in Regional Setting of Control Panel.
    We can get an instance of DateFromat using DateFormat.getDateInstance(DateFormat.SHORT) but problem is that there is no toPattern() exist in class DateFormat.
    However toPattern() exist in class SimpleDateFormat but there is no costructor like SimpleDateFormat(DateFormat)
    So please advise me, how can I get system short date format pattern?
    Thanks
    GAJESH TRIPATHI

    I reterieve the system date format but not which is currently defined in regional setting of control panel but it returns the format which is installed by default when windows(os) is installed.
    Edited by: gajesh on ? ????????, ???? ??:?? ?????????
    Thanks to provide me solution. My source code related problem is solved but still I am not getting format which is defined in control panel. but By Letting that it is not possible in Java,... I am doing my next work...so CLOSE THIS TOPIC Thanks'n Bye.

  • How to get standard settings for instant messaging...

    I'm using nokia 3120 classic. It have IMs but i can't chat Yahoo. Please guide me for details to getting standard settings internet. Thanks so much!

    how can i get INSTANT MESSAGING SETTING.

  • How to get default radio button in IE11 as it is in IE8 ?

    The default radio buttion in IE8 is blue in colour with 3D look and feel. But, the default radio button in IE11 is black and look and feel is different. How can i get the same radio button in IE11 as it is in IE8 ? What changes i need to do in css to get
    the same. Please suggest.
    Html
    <input type="radio" name="sex" value="male">Male<br>
    <input type="radio" name="sex" value="female">Female

    http://stackoverflow.com/questions/29657504/how-to-get-the-same-default-radio-button-in-ie11-as-it-is-in-ie8
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can get my settings icon home pages becouse hide setting, how can get my settings icon home pages becouse hide setting

    how can get back the settings icon home pages becouse it hide settings

    Looks like a sudden error being thrown up on many ATV2 units.  Yesterday, mine was fine and today I now only have 2 icons like so many other posters.
    No amounts of restarts or restores, disconnecting and reconnecting power, restarting routers, re-logging in to iTunes has any effect at all.

  • How to change default settings for a video generator?

    I'm using a video generator (Lyric Media's Pan Zoom Pro) many times in the same project, and have to change the default settings for each new instance of the generator that I create. I'm wondering if there's any way to change the default settings for a generator (i.e., length of clip, individual slider and checkbox settings in the "controls" tab) so that each new instance automatically has my customized settings when I first open it.
    Thanks.

    That works for the all the controls/filter settings. The clip length still defaults to 10 seconds, but that's OK, since the main thing I was looking for was to change the clip's internal settings. Thanks for your help

  • How to copy default settings to all user ?

    Dear Expert
    I want to set for all users have same default settings (default form layout)
    is there any way to copy default settings from 1 user to another users ?
    really appreciate your help
    thank you
    Best Regards
    JeiMing

    Hi,
    If am understood, I hope you are expect the authorization copy.
    Procedure
           1.      In the Administration  --> System Initialization  --> Authorizations window, choose the name of the user whose authorizations are to be copied. Hold the mouse button until a rectangle appears around the user name.
           2.      Drag the rectangle to the name of the user to whom to grant the authorizations.
           3.      Release the mouse button.
           4.      A system message prompts for confirmation of the copy operation.
           5.      Choose OK to confirm the operation. The authorizations are copied completely to the second user.
    Thanks & Regards,
    Venkatesan G.

Maybe you are looking for