How to get Delta ILSR : suppliers wont import

Hello, im having problems getting the k7n2 delta ilsr, the suppliers wont import it to my counrty (malaysia), any suggestions on how to get it?

Have you tried buying it online? You'll pay an arm and a leg for shipping probly which wouldn't make it worth it...
Have you tried paying anyone off like say a distributor there in your country? Give him 100 bucks *equivelent* and see what he says heheheh
Have you called around to see who may have 1 in stock there already?
Have you looked on the MSI website to see where their local CS house is or the closest one? Maybe they'll sell one directly to your local retailer...
Get creative...where there's a will there's a way!
Cheers!! 8)

Similar Messages

How to get breakup of Supplier Liability A/c

Hi,
I am want to develop a report which gives breakup of Supplier Liability a/c.
Liability A/c: 01-00-00-12111-00
Supplier: abc
Invoice_number.................Invoice Date...................Invoice Amount................Remaining Amount
Sub-Total Supplier abc
Supplier: xyz
Invoice_number.................Invoice Date...................Invoice Amount................Remaining Amount
Sub-Total Supplier xyz
Report Total................................................................................................ xxxxxx
This report total should match with the Libaility a/c balance in the GL.
Regards/Prasanth

Hi Devashish,
WdContext.node<Your_node_name>().size() will give you the no: of rows.
This should be the node that is bound to the table's datasource property.
WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value); will select the row at that particular index.
You can access an attribute of a particular row as
WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value).get<attribute_name>();
Hope this helps,
Best Regards,
Nibu.
Message was edited by: Nibu Wilson

How to get nice, joined curves when importing SVG, WMF etc?

Hi,
I am importing SVG and WMF files for die lines for packaging design into Illustrator. These are later used as cut lines for our flatbed cutter, and we make the design work in Illustrator for printing.
The problem is that all curves are divided into paths that are not joined together, meaning that our cutter will jump up and down for every little bit of the curve, and it takes a long time compared to just dragging the knife in one, fast movement.
I have achieved to fix it by manually select curves and select JOIN, but it is time consuming, and I wonder if there is a way to select an entire path and join it? Or, are there some good way to get the imported data to real vector data, as that's what they are...?
I never got this issue in Serif PagePlus and Serif DrawPlus, but these software titles are not available for the Mac OS X.
I hope someone can point me in the right direction, as it's incredible to finally be back on the Adobe platform.
Best regards,
Thomas
Norway

Thomas,
What happens if you Ctrl/Cmd+A, then Ctrl/Cmd+J, to join everything in one go?
You should have adjacent paths joined together. Depending on the paths, there may be a few unwanted joinings, but hopefully they are obvious enough to spot and remove; you may be able to just Direct Select those unwanted path segments and delete them, leaving the original path ends as they are.

Collapsed request in infocube-How to get delta back

Hi All
I am loading the data from one ODS to cube1,cube2 and ODS1.
this is the delta update.
there is a load failure today.the load failure is due to the SID values missing for for one characteristic.
the requests in cube1,cube2 and in ODS1 are red.
but i the morning somebody made the red request in cube one in manage tab green and collapsed the same.
Actually i wanted to repeat the delta by deleting the requests in 2 cubes and ods.
But now the request in cube 1 is already collapsed what can i do now to get the last delta.
can anybody pls suggest.
urgent plsss....
Thanks in advance
S VR

Yes you are correct SVR,
We can not delete request once it is compressed. Selective deletion is not usefull in this case.
You can try following -- Be careful -- follow steps -- first try in Dev
If you know last requests generated todays delta in base/source ODS and those requests are available in PSA for reconstruction.... then...
1. Delete initialization from this source ODS to all 3 targets.
2. If requests are available for reconstruction, delete required requests from ODS.
3. Now initialize without data transfer from ODS to 3 targets(2cubes + 1ods).
4. Reconstruct deleted requests in Source ODS(it generated delta)
5. Pust delta to 3 targets.
Hope it helps
Srini

How to get delta - datasource

Hi There!
Excuse me for some lame q's- being a starter in BW I'm looking forward some help to fix an issue.
There is a table in R3 for I need to see if a particular data was recorded but unf this table is refreshed every fortnight. But the scenario extends to BW data extractor and source for which config is active. How can we see the data replicated in BW for a specific date? Will there be any history maintained? Pls can someone throw some light on it?

Hi,
Am unable to understand your issue description.
Assuming as you need to see the last refreshed data from ecc.
Actually we never replicate data into bw. We load ecc data into bw by using extractors/info pack.
if your data source supports delta , then you can check your info pack monitor screen.
based on that you can see last night data was refreshed or not.
Even your data source have any date field then at PSA you can check data by filtering on date field.
Even go to your data source-->manage-->see the latest loaded request.
Thanks

How to get an adaptive webservice model imported to a webdynpro DC?

Hi,
when I import an "Adaptive Web Service"-model to a local wd-project, everything is fine and the "Java Build Path" is obviously set up with all needed jars.
But when I build a NWDI-web dynpro DC and import the same wsdl-file, it throws me lots of errors, that required classes can't be resolved. It's the same, when I try to create a NWDI-DC out of the former local one.
So, my question is: do I have to put all the Variables of the "Java Build Path" to the DC as well (to my understanding, the problem would be only solved locally. as soon as I try to build it on the NWDI, it would fail again). Where in the DC-"References" have the jar/files/references to be added, too?
and: where can I find documentation, which files are needed at all? (there are about 30-40 entries in the local "Java Build Path" and I don't want to put them one by one to the DC... ;-(
kr, achim

I had this same problem a couple of days back, the error was due to incorrect import of software components. There are three basic software components that needs to be imported :
a) SAP-JEE*.sca
b) SAP-JTEch*.sca
c) SAP-BUILDT*.sca
This is true with respect to SAP NW2004 SP16. However, I have also noticed that in NW04S 7.00, the files are named differently. Please make sure if you have imported the correct .SCA files with proper version. There is a How-To guide available for SAP NW2004, unfortunately there is no guide available for SAP NW2004s, yet.
Regards,
Subramanian V.

Accidental format how to get data back as its important files hp-g6 2291ae

accidental format of c drive..
lost all important data as thought was backed up...
have tried few programs but encounter same problem only finds half the files...
have looked at winpe instal disks etc and confused...
any advice help etc
thanks

Hi riddla182, welcome to the HP Forums. The programs you may have found, would probably all use the same technology to recover lost files. So if a few didn't work, its unlikely you will find a low cost solution for this. I do not have any recommendations on this topic.
There are many data recovery companies out there, and as I mentioned, it can be quite costly to recover data. You will have to research the actual costs, and determine if it is worth the costs to retrieve your data (if it is still retrievable).
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How to get Delta field while going for a generic data source

Hi all,
We want to create a generic data source for tables involving MSEG,MKPF,SER03,OBJK and EQU by creating a view on these tables.
fields we are mapping are ...
MKPF          MSEG         SER03        OBJK       EQUI
MBLNR        MBLNR       MBLNR
MJAHR        MJAHR        MJAHR
                   ZEILE          ZEILE
                                      OBKNR        OBKNR
Can any help us out in finding/creating a delta specific field,so dat we do deltas in BW after initial initialisations?
Thanks all,
Doug

HI
Try to use some time characterstic.
Generic data will support the following delta's.
Time stamp
Calender day
Numeric Pointer(for exmple doccument number,counter etc)
regards,
Chandra.

Hi, Does anyone know how to get all album art to import from Itunes.

My Itunes Library/Media states that all album art is present and accounted for but when I sync with Itunes half of my album art on the Ipad is blank.

Hi WIll_Maveric
To get album art to an album on iTunes:
Go to iTunes
Right Click on the album you want to get the art for
Click album artwork
If the songs/album can be found on the iTunes database it will add automatically
If the songs/album cannot be found on the iTunes database it will not add automatically, so I would suggest you go to the internet find the image.
Copy it and then go into iTunes
Right click on the album/song
Click on Get Info
Click on Artwork
Paste the image into the box (Command v) or (Control v)P
Then click OK
Go to your device and sync it again
You will have the artwork there.
Many Thanks for your question and allowing me to help you today.
iBenjamin Crowley

How do I align large numbers of imported photos

I have been trying to figure out how to get the photos that I
import onto the to create a slide show, to all align to the stage
with one command. I have to manually align each pic... If I have a
large number of pictures it is quite a headache to do each and
every one... Thank you.

Edit Multiple Frames (it's a button to the right of the Onion
Skin buttons at the bottom of the
timeline:
http://www.biteycastle.com/lessons/emf.htm
--> Adobe Certified Expert (ACE)
--> www.mudbubble.com :: www.keyframer.com
-->
http://flashmx2004.com/forums/index.php?
-->
http://www.macromedia.com/devnet/flash/articles/animation_guide.html
-->
http://groups.google.com/advanced_group_search?q=group:*flash*&hl=en&lr=&ie=UTF-8&oe=UTF-8
merry1 wrote:
> I have been trying to figure out how to get the photos
that I import onto the
> to create a slide show, to all align to the stage with
one command. I have to
> manually align each pic... If I have a large number of
pictures it is quite a
> headache to do each and every one... Thank you.
>

MSI K7N2 Delta-ILSR Wont boot up (no display no bios)

Hi
i bought a AMD Athlon XP 3200+ & MSI K7N2 Delta-ILSR.
unfortuntly i can't boot it. it wont show anything on screen.
i have tried anything i red in this forum (clear cmos... safe mode jumper...strip all parts...)
all i get is :
blank black display, no beeps and keyboard lights flashes over and over (when connected to a KVM hub), when conected directly to keboard the lights flashes only once but stil black display and no beeps (i hear on speake,when powering up PSU, a silent short noise, no beep).
power suply turns on (new one 500w), i tried agp video card and replaced with pci video card.
memory is kingstone 512mb pc3200 400MHz x2, i tried only one of them and both in diferent sockets.
cpu: AMD xp 3200+ 400fsb.
i did succed to go into bios only once, after lots of resets and shutdowns and bios clear (after ouers)
i choosed in the bios: load bios defaults, and thats it. i hoped it starts up but nothing.
i did all testing i know (checked all pins, cables, clear cmos...all, you name it)
all parts are brand new (except motherbord. it's seconds hand from eBay. i've bean talled that it works fine)
i also e-mailed MSI support that question. (2 days ago. no answer yet)
oh...and i have a pci POST diagnostic card and its 7seg display don't shows any numbers, only when once i succed to get into bios. i don't have the msi original D-Breket addon diag.
can you help me?

hi guys
here is my PSU specs:
Colors-It 500w-Max Silent ATX Power Supply
Voltage 115/230V
Current 10A/5A
Frequency 60/50Hz
+3.3 +5 +12 -12 -5 +5SB BLK GRN GRY
30A 50A 15A 1.0A 1.0A 2.5A COM P-ON PG
connectors:
ATX-2.03 Connector: 1
ATX-12V Connector: 1
CD-Rom/HD 4 Pin connector: 6
Floppy 4 Pin Connector: 2
Serial ATA Connector : 1
cpu: AMD Athlon XP 3200+
MotherBoard: MSI K7N2 Delta-ILSR More: http://www.msicomputer.com/product/p_spec.asp?model=K7N2_Delta-ILSR&class=mb
Memory: kingstone 512mb pc3200 400MHz x2 More: http://www.ec.kingston.com/ecom/configurator/PartsInfo.asp?ktcpartno=KVR400X64C3A/512
i have other brand of memory moduls (micron pc2300) i tried them too. no go.
i tried other PSU, i pulled from my brothers pc (amd xp 1400+).
as i said before, i have pci POST diagnostic card so it could tell me any problem. iguss it's the mobo, posibly bios upgrade.
but if mobo not showing bios, i can't update bios from floppy.
and the tested the mobo out side the case on a antistatic mat and i useed an antistatic strip.
as i said i could get into the bios once, after many resets....choosed 'load bios defaults..', restarted and.....no go.

How do i get rid of the last import album on my iPhone?

How do i get rid of the last import album on my iPhone its taking up almost half my storage of my whole phone?!!

This is the iPhoto for Mac forum - you need the iPhone forum for iPhone questions - I will request tha tit be moved
LN

ITunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help

iTunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help

It is likely a hardware failure
http://support.apple.com/kb/TS3694?viewlocale=en_US#error1

I imported different trips to different catalogs on different external hard drives. Later renamed external HDs. I want to combine catalogs and have my source (NEF) files all together on one drive. I'm not really sure how to get those source files back

I imported different trips to different catalogs on different external hard drives. Later renamed external HDs. I want to combine catalogs and have my source (NEF) files all together on one drive. I’m not really sure how to get those source files back and get rid of the extra long path to where the source files are now located. If I re-link files to their current catalog (many different paths to files in same catalog) can I merge (import catalogs) into one master catalog? Will the new (Master catalog) have the correct link to the source file? If not, how or can this be done?
I have tried to explain my situation as clearly as I can. Do you understand my situation?
This maybe something you don’t have time to help me with. If not can you suggest somewhere I can get an answer? I really need help. PLEEEZZZ HELP ME.
Bruce Schuerman
Norman, OK
405_514-4875 (call collect)
[email protected]

Is there any solution (other than buying
I really think 'buying' is the best solution on this one. Ideally, you would have at least five internal hard drives.
System
Projects
Cache/Scratch
Media
Exports
Use externals and network drive only for backup.

How do I get CDs that have been imported into iTunes library to sync/transfer to phone?? very frustrating and any help would be appreciated. all the material i purchased from itunes transferred fine, but CDs won't. Please help!

How do I get CDs that have been imported into my iTunes library to sync/transfer to my iPhone?? All the material that I purchased from iTunes has transferred just fine, but although the CDs will import to iTunes, they will not sync up with my phone. How do I do this?? I am very frustrated and would greatly appreciate any help.

In what format did you import the cds?
I have never had an issue with this.

How to get Delta ILSR : suppliers wont import

Similar Messages

Maybe you are looking for