How to get discrete AC3 channels with sblive

When playing DVD movies or DIVX video with AC3 sound I get all the channels mixed in stereo. When choosind four speaker configuration there is no sound from surround channels and in my rear speakers I hear the same channels than in my front speakers. I can get discerete AC3 channel playback even with my Realtek onboard sound, I cannot believe I could not do the same with the much more powerfull SBli've 5..

Cdbular,
How are your speakers connected to your SBLi've!? If you are connected using a digital coax connecter then you will need to set up your system to do SPDIF bypass. Here is an article that explains what you will get from this kind of connection:
http://us.creative.com/support/kb/ar...p?l=2&sid=5764
Jeremy

Similar Messages

How to get hd free channels with indoor antenna on model # 32C110U

i have had my tv since 2012 and had been using bell expressvu , but due to poor service decided to cancel and use an indoor antenna.
I cannot get a picture on any channel when i connect my antenna, but with bell i had great receptionl i have a 100.00 antenna , so i must be doing something wrong when i hook up. HELP

First, ensure you've set the input source to Antenna as described on page 24 of your user's guide, then program the channels as explained on page 25.
- Peter

Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

How to get gui_download and gui_upload with popup filename?

how to get gui_download and gui_upload with popup filename?

Here is a short example.
report zrich_0003 .
data: ifiletab type filetable.
data: xfiletab like line of ifiletab.
data: xstring type string.
data: rc type i.
data: itab type table of string.
data: xtab type string.
start-of-selection.
call method cl_gui_frontend_services=>file_open_dialog
    changing
      file_table              = ifiletab
      rc                      = rc.
read table ifiletab into xfiletab index 1.
xstring = xfiletab-filename.
check not xstring is initial.
call method cl_gui_frontend_services=>gui_upload
    exporting
      filename                = xstring
changing
    data_tab                = itab.
loop at itab into xtab.
    write:/ xtab.
endloop.
Regards,
Rich Heilman

How to get the contents associated with a component.

How to get the contents associated with a component.
Like i have 2 buttons and i want to get the contents associated with these button without clicking them i.e without firing the event.
By Contents i mean, whatever things we get after firing the event,we get some other window and some thing is added to the current page and so on.

grab all the code inside the actionPerformed(ActionEvent e) method

How to get a minus sign with the cost field in ALV.

Hi ,
How to get a minus sign with the cost field in ALV.
The Ouput will be displayed like Rs -1500 instead of 1500-
I can't use concatenate also as i may have to use the sum functionality of ALV .
Cheers
Sunny

Hi sunny,
1. The OTHER FIELD
has to be character field of say length 15.
2. Write the original numeric value to
this character field (in a loop)
3. But simply writing won't help.
4. use this kind of logic.
5.
REPORT abc.
DATA : m TYPE i.
DATA : chr(15) TYPE c.
m = -100.
WRITE m TO chr.
IF m < 0.
SHIFT chr RIGHT BY 1 PLACES.
CONDENSE chr.
CONCATENATE '-' chr INTO chr.
ENDIF.
WRITE chr.
regards,
amit m.

How to get vlan tag programe with mac book air

how to get vlan tag programe with mac book air,i'm using the usb ethernet adapter

For prompt help contact TATA.
For more on this: https://discussions.apple.com/thread/3680625?tstart=270

How to get an error icon with tool tip in a displaying table in a particu

How to get an error icon with tool tip in a displaying table in a particular field..
Thanks.

Hi,
In the context create an attribute of type string .
Create the attribute in the node which you bind for table.
In the layout .
1.create a Table UI element.
2 create binding for UI element.
3Right click on the Table UI and select insert table column.
4.once the table column is inserted right click on table column and select insert cell editor.
5.create the cell editor of the type image.
6.Bind the source property of the image to the attribute in the node which you have created.
so depending on what image(type of icon) needs to be displayed set the attibute accordingly.
refer to the link for image :
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/d1/af8841349e1909e10000000a155106/frameset.htm]
Priya

How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
Thanks!
Philipp

Philipp,
The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
Please repost if you need addition assistance. Good luck with your application!

How do I acquire multiple channels with NIDAQmxBase?

Sorry for the double post, I just thought my previous message subject looked more like a tutorial rather than a question.
My question is the same, I am looking to acquire more than 2 channels worth of data using C++ and NIDAQmxBase. I have tried initializing with and without the timer. Without the timer I will get an actual response, with it the program stalls. I don't know if I am splitting up the data correctly...not sure how the DAQmx_Val_GroupByChannel works or whether I should use GroupByScanNumber.
Here's my code (snippets from my prog):
char Dev1_joint1_channels[] = "Dev1/ai0:1";
char Dev1_joint2_channels[] = "Dev1/ai2:3";//the only reason I split this is to test with and without
//buffersize is 500
uInt64 samplesPerChan = bufferSize/4;
// Data read parameters
float64 data[bufferSize];
int32 pointsToRead = bufferSize;
/---------Initialize the task--------------------/
DAQmxErrChk (DAQmxBaseCreateTask("",&taskHandle));
DAQmxErrChk (DAQmxBaseCreateAIVoltageChan(taskHandle,Dev1_joint1_channels,"",DAQmx_Val_Diff,min,max,DAQmx_Val_Volts,NULL));
DAQmxErrChk (DAQmxBaseCreateAIVoltageChan(taskHandle3,Dev1_joint2_channels,"",DAQmx_Val_Diff,min,max,DAQmx_Val_Volts,NULL));
DAQmxErrChk (DAQmxBaseStartTask(taskHandle));
WHILE LOOP
/---------Acquire data--------------------------/
DAQmxErrChk (DAQmxBaseReadAnalogF64(taskHandle,pointsToRead,timeout,DAQmx_Val_GroupByChannel,data,samplesPerChan,&pointsRead,NULL));
/---------Assign to variables after averaging---/
joint1_chanA = arrayAverage(data,0,pointsToRead/4);
joint1_chanB = arrayAverage(data,pointsToRead/4,pointsToRead/4);
joint2_chanA = arrayAverage(data,pointsToRead/2,pointsToRead/4);
joint2_chanB = arrayAverage(data,pointsToRead*3/4,pointsToRead/4);
}//END WHILE LOOP
This works perfectly for just 2 channels, without even using the timer. I tried to stick the timer in, but the acquisition would not even go at that point. With 2 channels, I simply average the first half of data and assign it to the appropriate variable and then do the same for the second half. This works very well for just 2 channels, it's when i get into 4 channels that the data is messy.
Help is appreciated!
Thank you!
Nathan
[email protected]

>I tried to stick the timer in, but the acquisition would not even go at that point.
What timer? There's no timer in your code. Since putting in the timer makes it stop, that would seem to be the problem, and you're going to have to show it to us.
A quick and not-very-careful read of your code seems to be OK, assuming the variables whose definitions and initialization you have left out are OK.
>not sure how the DAQmx_Val_GroupByChannel works or whether I should use GroupByScanNumber
The way you're doing the averaging requires DAQmx_Val_GroupByChannel.
John Weeks
WaveMetrics, Inc.
Phone (503) 620-3001
Fax (503) 620-6754
www.wavemetrics.com

How to get the edit channel link from within the channel?

Following problem:
I want to include a link to edit the settings of a channel in the channel contents. The link should be the same as the edit button on the frame of the channel container. Searching through the provider jsps I found that the edit link is created in single.jsp. The code I need seems to boil down to
<dt:obtainContainer container="$JSPProvider">
<dtsingle:singleContainerProvider>
<dtpc:getStringProperty key="editContainerName" id="editContainerName" scope="request"/>
<dt:getName id="SingleContainer" scope="request"/>
<jx:declare id="editContainerName" type="java.lang.String"/>
<jx:declare id="SingleContainer" type="java.lang.String"/>
<dtsingle:obtainSelectedChannel>
<A HREF="<dtpc:getDesktopURL/>?action=edit
&provider=<%=editContainerName%>
&targetprovider=<dt:getName/>
&containerName=<%=SingleContainer%>"
TARGET="_self"> EDIT! </A>
</dtsingle:obtainSelectedChannel>
</dtsingle:singleContainerProvider>
</dt:obtainContainer>However I am unable to get that working in the channel, as I always receive a ProviderException on the line with
<dt:obtainContainer container="$JSPProvider">
What am I doing wrong, or is does the obtainContainer simply not work from within a channel?
If anyone can help me out to get the edit link it would be greatly appreciated. Any hints and/or sample code would help alot.
thanks!
Message was edited by:
obstler42

Hi Detlev ,
Thank you very very much . We could figure out how to get the URL and Driver information from there .I have rewarded the points also.
Thanks
Ravi
Message was edited by: Ravi Krishnan

How to get instance of Class with its type parameters

Hi,
Have any of you folks been dealing with generics long enough to show me how this should be written? Or point me to the answer (I have searched as well as I could).
I boiled down my situation to the included sample code, which is long only because of the inserted comments. And while boiling I accidentally came across a surprise solution (a bug?), but would obviously prefer a smoother solution.
My Questions (referred to in the code comments):
#1. Is there a way to get my parameterized type (classarg) without resorting to using the bogus (proto) object?
#2. Can anyone understand why the "C" and "D" attempts are different? (All I did was use an intermediate variable????) Is this a bug?
Thanks so much for any input.
/Mel
class GenericWeird
   /* a generic class -- just an example */
   static class CompoundObject<T1,T2>
      CompoundObject(T1 primaryObject, T2 secondaryObject)
   /* another generic class -- its main point is that its constr requires its type class */
   static class TypedThing<ValueType>
      TypedThing(Class<ValueType> valuetypeclass)
   // here I just try to create a couple of TypedThings
   public static void main(String[] args)
      // take it for granted that I need to instantiate these two objects:
      TypedThing<String>                        stringTypedThing = null;
      TypedThing<CompoundObject<String,String>> stringstringTypedThing = null;
      // To instantiate stringTypedThing is easy...
      stringTypedThing = new TypedThing<String>(String.class);
      // ...but to instantiate stringstringTypedThing is more difficult to call the constructor
      Class<CompoundObject<String,String>> classarg = null;
      // classarg has got to be declared to this type
      //    otherwise there will rightfully be compiler error about the constructor call below
      // This method body illustrates my questions
      classarg = exploringHowToGetTheArg();
      // the constructor call
      stringstringTypedThing = new TypedThing<CompoundObject<String,String>>(classarg);
   } // end main method
   // try compiling this method with only one of A,B,C,D sections uncommented at a time
   private static Class<CompoundObject<String,String>> exploringHowToGetTheArg()
      Class<CompoundObject<String,String>> classarg = null;
      /* Exhibit A: */
////     classarg = CompoundObject.class;
         results in compiler error "incompatible types"
         found   : java.lang.Class<GenericWeird.CompoundObject>
         required: java.lang.Class<GenericWeird.CompoundObject<java.lang.String,java.lang.String>>
               classarg = CompoundObject.class;
                                        ^
         I understand this. But how to get the type information?
      /* It's obnoxious, but it looks like I will have to construct a temporary
          prototype instance of type
             CompoundObject<String,String>
          in order to get an instance of
             Class<CompoundObject<String,String>>
          (see my Question #1) */
      CompoundObject<String,String> proto = new CompoundObject<String,String>("foo", "fum");
      /* Exhibit B: */
////     classarg = proto.getClass();
         results in compiler error: "incompatible types"
         found   : java.lang.Class<capture of ? extends GenericWeird.CompoundObject>
         required: java.lang.Class<GenericWeird.CompoundObject<java.lang.String,java.lang.String>>
               classarg = proto.getClass();
                                        ^
      /* Exhibit C: */
////     classarg = proto.getClass().asSubclass(proto.getClass());
         results in compiler error: "incompatible types"
         found   : java.lang.Class<capture of ? extends capture of ? extends GenericWeird.CompoundObject>
         required: java.lang.Class<GenericWeird.CompoundObject<java.lang.String,java.lang.String>>
               classarg = proto.getClass().asSubclass(proto.getClass());
                                                     ^
      /* Exhibit D: (notice the similarity to C!): */
////     Class tmp1 = proto.getClass();
////     classarg = tmp1.asSubclass(tmp1);
      /* It compiles (see my Question #2) */
      return classarg;
   } // end method exploringHowToGetTheArg()
} // end class GenericWeird

Thanks so much, Bruce. (Oh my goodness, how would I have ever come up with that on my own?)
So in summary
This doesn't compile:
      classarg = (Class<CompoundObject<String,String>>)CompoundObject.class;but these do compile:
      classarg = (Class<CompoundObject<String,String>>)(Class)CompoundObject.class;or
      Class coclass = (Class)CompoundObject.class;
      classarg = (Class<CompoundObject<String,String>>)coclass;And this doesn't compile:
       classarg = proto.getClass().asSubclass(proto.getClass());but this does:
       Class tmp1 = proto.getClass();
       classarg = tmp1.asSubclass(tmp1);

How to get terminal address along with Change document header

Dear All
My client want a report of the frequencies of a sales document changes along with terminal address. In table CDHDR i can get user name, date, t-code but not the terminal address. So requesting to guide me of how to get the terminal address from which terminal the document has been updated.
Appropriate answer will be rewarded.
Regards
Kingshuk
Edited by: Kings_Roy on May 31, 2010 11:02 AM

I don't think this information is kept in change documents. So for the change documents that are already created, you cannot get this information.
For future however you can do some code changes to get this information.
Function module TH_USER_INFO can return terminal name as well as IP address for a given client and user.
All you have to do is either store this additional information along with change documents. For this i think you can check the FMs that are writing SD change documents.
OR
You can use user exit exit SUSR0001 (User exit after logon to SAP System) to call this Function (TH_USER_INFO) at user logon and store this info in a Z table. Later when you are reading change documents, you can get user name, date time from change document and search this Z table for respective user Terminal name and IP Address.
This is not a complete solution but i hope it will direct you to a solution.
cheers.

How to get player's score with Adobe's Gaming SDK GameCenter ANE

Hi! I need your help with something that should be super easy, but I really couldn't find anywhere.
How do I get local player's highscore with adobe's gamecenter ane, from Gaming SDK? There is a requestScores, but in the only parameter it would make sense to specify the player type (playerScope:String) I only have 2 options to specify (Friends or Global). No option for Local. Default is global..
When using GameCenter, I want to show the player when he beats his own GameCenter's highscore, and print the current highscore on a results screen when he doesn't beat it. But I can't find anywhere how to get it through this ANE.

Hi Decco, I would like to show only the player's highscores inside my game, for each leaderboard.
4morrone, I have the highscore stored in the device, but I would prefer if the player could see his highscores in any device he is logged in. Or if he re-installed the app, for example. When the player beats a level with a new highscore I show him a "New Highscore" screen, which wouldn't be so cool if the local highscore doesn't match his GameCenter score.
I mean, Its not a really big problem, but I thought it would be easy. It's kind of strange that there is a function to get friends scores, global scores, but not local player's scores (which is a more important information), why would I get friend's GameCenter scores, if I can't compare them to the player's GameCenter score.

How to get a quiz developed with a timer in Adobe captivate 8

I want to develop a quiz with 10 questions. So those who answer max correct answers with less time should be announced as winner
Current version 8 doesn’t show the option to publish file into exe.
Also I have few issues with the current package I prepared.
Not sure how to get the timer
enabled in the package.
Need to add logo on all slides
3. How to add hyperlink
for Adobe Registration.
Some experts please help me

Well, first, I believe if you update CP8 to the latest version:
Adobe Captivate Help | Adobe Captivate 8 patch
Then the .exe option is restored to Captivate.
But that probably won't help your other request.
For Captivate itself to know if someone's score is best, it has to know what all the other users' scores are.
How will it find that out? (especially as an .exe which is going to likely have even a harder time getting info from the web)
The best way to do what you want is to use an LMS with that 'leaderboard' feature (i.e ExpertusOne)...so it can evaluate everyone's recorded scores and show the best.
And even that would probably need a hack as I *assume* it basis 'best' on the score, not on the time.
So even if you could do a timer in Captivate, it has no way of knowing other users' scores nor a way to evaluate which is 'best' even if it did.
(you might be able to work that all in with extensive JS hacking?)
Fortunately, the logo is pretty easy - put the logo image on the master slide(s) you use in the piece.
What sort of Adobe Registration do you mean?

How to get discrete AC3 channels with sblive

Similar Messages

Maybe you are looking for