How to get Dolby Digital from ATV2 and iTunes Movies??

I have an ATV2 hooked up to my Denon 789 AVR via optical cable, and the HDMI hooked directy to my HTDV. My Denon is receiving the signal apparently as a PCM and thus, only receiving 2 channel. When I stream an iTunes movie from my ATV2, I only get Dolby Pro Logic II, and not Dolby Digital. When I go into the ATV2 settings and under Audio and Video set Dolby Digital from "Auto" to "On", I don't get any sound on my Denon 1910. Any idea what's going on?

mightyprops wrote:
... I see the Dolby sound icon on the movie's page........
That would be the place to look.

Similar Messages

How to get purchased song from iphone to itunes on computer

how to get purchased song from iphone to itunes on computer

Open itunes, connect iphone, Click File>Transfer Purchases

How to get a parameter from BPC and use it in ABAP program

Hello gurus!
I got a problem...
SAP BPC will send parameters such as year, division, category, company code and so on via script logic to SAP BW.
I need to get these parameters from BPC and use them in a ABAP program as a filter.
This ABAP program will do several routines and return new values to BPC. It must be made on ABAP and I need to filter data to avoid performance issues.
Does anybody knows how to do it? or have a example of it?
Thank you in advance.
Regards,
Rubens Kumori

Hello, I'm looking for a suggest.
I need to pass two parameters (users can input them in a data manager package in bpc) to a BAdI.
In this BAdI I write a code that store those parameters in a InfoObject.
The problem is:
- one parameter is for CATEGORY value. CATEGORY is a dimension of the application and I read the value with a code like this:
      READ TABLE it_cv INTO l_s_it_cv
           WITH TABLE KEY dim_upper_case = 'C_CATEGORY'.
- other parameter is a generic DATE. this parameter is not a dimension of the application and I don't know how I can retrieve this value in BAdI.
      READ TABLE it_cv INTO l_s_it_cv
           WITH TABLE KEY dim_upper_case = '.....'.
The data manager dynamic script is:
PROMPT(SELECTINPUT,,,,"%CATEGORY_DIM%")
PROMPT(TEXT,%SELECTED_DAY%,"Write the date (format YYYYMMDD)",)
I also have a dynamic constant that assign the name %CATEGORY_DIM% to "C_CATEGORY" value.
Can anyone help me?
thanks a lot
Edited by: Luca Novali on Feb 13, 2012 3:49 PM

HT1918 how do get my music from my old itunes account

how can i get my music from my old itunes account

Welcome to the Apple Community.
The following article(s) may help you.
Moving your iTunes library to a new computer

How come I get Dolby Digital decoding, CMSS, and EAX effec

Perhaps this is related to the fact that I use either headphones or 2. speakers. The info on the Vista beta driver says I'll get no dolby digital, CMSS, etc.
But, in PowerDVD I set to SP/DIF and the Creative decoder gives me the DVD audio fine! I turn on CMSS 2 and it expands things nicely for my headphones just like on XP.
Same with the Advanced EQ EAX settings and CMSS 2 with mp3 listening with headphones. The different settings all work, and have worked even before the Vista driver came out when I was using the XP driver.
Is it just the expansion to 5. speakers that doesn't work yet? Because the headphone listening effects seem to not only work, but music and DVD's actually sound better than on XP!
Further info: Vista RC Build 5728 32-bit, Audigy 2 ZS Platinum, Vista Beta Driver.
The driver install went perfectly except for some error messages on the first restart about driver access.
The major improvement for me regarding the Beta drivers over the XP ones is that Creative Soundfont Manager and Soundfont midi now works. I custom installed the Soundfont Manager, AudioHQ, and found that for some reason the DTS/Neo stuff gets installed along with System Info and Registration even when not selected. I left out everything else and did not install MediaSource Player.
Audio Console is able to control all the stuff in it. EAX Control in AudioHQ doesn't seem to work properly but Audio Console can switch between the preconfigured settings and the changes take effect fine.
Just no EQ. I tried installing it and it wouldn't run. That's how I found out the DTS stuff is installed. I noticed it when uninstalling the EQ.
The Advanced EQ in Audio Console works fine though.
Apparently the Vista Audio improvements help out the sound quality. At least for mp3 listening and DVD's, things are sounding quite a bit better than they do on 9x or XP.
Now if we could get a new driver/software package from Creative. Heck, they did it for Li've/Audigy shortly after XP came out (redesigning the whole package). Maybe they'll actually make us happy and give us a similar easy to install package that all works together.
I'm sure this won't happen until after Vista final comes out, but I wouldn't be surprised if they have this in mind.
It's just frustrating during the beta period. Especially for those that haven't gotten good (or, any) results.
It's weird. I know I've been lucky but nearly anything I've tried since starting to test Vista with my Audigy 2 ZS has mostly worked.

From what I've seen, the most of the problems with the cards are with the 64-bit drivers. My Audigy 4 also works with the XP drivers of the CD and Vista B2 drivers as much as they should. Many people don't realize that it is a beta driver, on a new OS (which is now in final development) so some things will and will not work. Also many people don't read readmes and such and still complain on things that where stated. Such as the Vista B2 drivers for the Audigy series
Known issues:
* Waking your computer from sleep or hibernate mode stops audio output. To resolve this, restart your computer.
* In this download, the Effects Amount slider in EAX is disabled.
* To configure your speakers, use Audio Console only. Configuring your speakers in "Audio Devices and Sound Themes" in Control Panel may result in loss of audio during playback in Windows Media? Player. To resolve this issue, close and reopen Windows Media Player again.
* This download does not support
o Dolby? Digital or DTS? decoding
o CMSS?-3D
o recording
o 6. speaker systems
All thats stated is pretty much what people are complaining. Though its stated what won't work, they may work due to its a general driver and not a specific driver. So some may have somethings working on one card, and not on the other.

How to get Date value from database and display them in a drop down list?

Hello.
In my Customers table, I have a column with Date data type. I want to create a form in JSP, where visitors can filter Customers list by year and month.
All I know is this piece of SQL that is convert the date to the dd-mm-yyyy format:
SELECT TO_CHAR(reg_date,'dd-mm-yyyy') from CustomersAny ideas of how this filtering possible? In my effort not to sound like a newbie wanting to be spoonfed, you can provide me link to external notes and resources, I'll really appreciate it.
Thanks,
Rightbrainer.

Hi
What part is your biggest problem?? I am not experienced in getting data out of a database, but the way to get a variable amount of data to show in a drop down menu, i have just messed around with for some time and heres how i solved it... In my app, what i needed was, a initial empty drop down list, and then using input from a text-field, users could add elements to a Vector that was passed to a JComboBox. Heres how.
package jcombobox;
import java.awt.*;
import java.awt.event.*;
import java.util.Vector;
import javax.swing.*;
public class Main extends JApplet implements ActionListener {
    private Vector<SomeClass> list = new Vector<SomeClass>();
    private JComboBox dropDownList = new JComboBox(list);
    private JButton addButton = new JButton("add");
    private JButton remove = new JButton("remove");
    private JTextField input = new JTextField(10);
    private JPanel buttons = new JPanel();
    public Main() {
        addButton.addActionListener(this);
        remove.addActionListener(this);
        input.addActionListener(this);
        buttons.setLayout(new FlowLayout());
        buttons.add(addButton);
        buttons.add(remove);
        add(dropDownList, "North");
        add(input, "Center");
        add(buttons, "South");
    public void actionPerformed(ActionEvent e) {
        if (e.getSource() == addButton) {
            list.addElement(new SomeClass(input.getText()));
            input.setText("");
        } else if (e.getSource() == remove) {
            int selected = dropDownList.getSelectedIndex();
            dropDownList.removeItemAt(selected);
    public void init(String[] args) {
        setSize(400,300);
        getContentPane().setLayout(new BorderLayout());
        getContentPane().add(new Main());
}And that "SomeClass" is show here
package jcombobox;
public class SomeClass {
    private String text;
    public SomeClass(String input) {
        text = input;
    public String toString() {
        return text;
}One of the things i struggled a lot with was to get the dropdown menu to show some usefull result. If the list just contains class references it will show the memory code that points to that class. Thats where the toString cones in handy. But it took me some time to figure that one out, a laugh here is welcome as it should have been obvious :-)
When the app is as simple as this one, using a <String> vector would have been easier, but this is just to demonstrate how to place classes in a vector and get some usefull info out of it, hope this answered some of your question :-)
The layout might have been easier to write, than using the toppanel created by the JApplet and then the two additional JPanels, but it was just a small app brewed together in 15 minutes. Please comments on my faults, so that i can learn of it.
If you need any of the code specified more, please let me know. Ill be glad to,

How to get return value from java and read by other application?

i want to read return value from java and the other application read it.
for example:
public class test_return {
    test_return(){
    public int check(){
        return 1;
    public static void main(String args[]){
       new test_return().check();
}from that class i make as jar file. How to read the return value (1) by other application?
thx..

If your installer is requiring some process it invokes to return a particular value on failure, then the installer is seriously broken. There are a bazillion commands your installer could invoke, and any of them could fail, which in turn could invalidate the entire install process, and any of them could return any value on failure. The only value that's consistent (in my experience) is that zero means success and non-zero means failure, with specific non-zero values being different in different programs.
About the only control you have over the JVM's exit code is that if your main method completes without throwing an exception, the JVM will have an exit code of 0, and if main throws an exception (either explicitly or by not catching one thrown from below), it will be non-zero. I'm not even sure if that's guaranteed, but I would guess that's the case.
EDIT: I'm kind of full of crap here. If you're writing the Java code, you can call System.exit(whatever). But nonetheless, if your installer requires certain exit codes from any app--java or otherwise--you have a problem.
Edited by: jverd on Oct 29, 2009 1:27 AM

How to get current month from filename and bulk insert from text file into table?

I set up some dynamic SQL to help my bulk copy data from a text file to a table. This works fine for files that come in every day; I get the previous day’s data, based on the file name that’s placed
in the folder. That’s why I’m using the ‘-1’. The dates will look like this: '20140131', so I'm using type 112.
declare @fullpath1 varchar(1000)
select @fullpath1 = '''\\system.local\ms\london\FTP\' + convert(varchar, getdate()-1, 112) + '_INDEXPRICES_EOM.SPC'''
declare @cmd1 nvarchar(1000)
print (@cmd1)
select @cmd1 = 'bulk insert [dbo].[SB_Monthly] from ' + @fullpath1 + ' with (FIELDTERMINATOR = ''\t'', FIRSTROW = 5, LASTROW = 675, ROWTERMINATOR=''0x0a'')'
print(@cmd1)
exec (@cmd1)
I think the syntax will be somewhat similar to this:
YEAR(date_column)=YEAR(getdate()) AND MONTH(date_column)=MONTH(getdate())
I’m not totally sure how to incorporate that into my current syntax.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

I tried a couple versions of this.
Declare @StartDate Date, @EndDate Date
Select @StartDate = convert(varchar, getdate()-28, 112), @EndDate = convert(varchar, getdate()-1, 112)
BEGIN
declare @fullpath1 varchar(1000)
select @fullpath1 = '''\\ms\london\FTP\' + ''' between ''' + Convert(Varchar(10), @StartDate, 101) + ''' and ''' + Convert(Varchar(10), @EndDate, 101) + '''_SP.SPC'''
declare @cmd1 nvarchar(1000)
print (@cmd1)
select @cmd1 = 'bulk insert [dbo].[SPBMI_Monthly] from ' + @fullpath1 + ' with (FIELDTERMINATOR = ''\t'', FIRSTROW = 5, LASTROW = 675, ROWTERMINATOR=''0x0a'')'
print(@cmd1)
exec (@cmd1)
END
Here’s the string:
bulk insert [dbo].[SPBMI_Monthly] from '\\ms\london\FTP\' between '02/03/2014' and '03/02/2014'_SP.SPC' with (FIELDTERMINATOR = '\t', FIRSTROW = 5, LASTROW = 675, ROWTERMINATOR='0x0a')
The error message I keep getting is:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'between'.
Msg 319, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'with'. If this statement is a common table expression, an xmlnamespaces clause or a change tracking context clause, the previous statement must be terminated with a semicolon.
I feel like I’m already pushing this thing to the limit.
Maybe this last part isn’t possible.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

[webdynpro] How to get the data from database and store in Excel sheet

Hi All-
I am developing an application in Webdynpro and I need to provide a URL ( link ) which if clicked , need to collect the data from Database ( SQL Server ) and puts in an Excel Sheet corresponding fields and opens the sheet.....
Please look into this issue and help me out......
Regards,
Cris

Hi Cris,
Add-on to wat santosh has pointed to:
Exporting table data to MS-Excel Sheet(enhanced Web Dynpro Binary Cache)
(Or) If you have implemented your logic to get Database records below Blog should guide you in opening an excel with ur records.
Exporting table data to MS-Excel Sheet(enhanced Web Dynpro Binary Cache)
Regards,
N.

How to get numeric result from 'search and replace' string function

hii
i am using search and replace function to get output.my output is of form ' *X0123.3 ' .here i am replacing the term *X01 with space because i need only 23.3 as a result.but i am unable to get that out in the output indicator.i used lot of functions like string to number and so on but i am getting output as zero .can you please suggest me wt to do.i am attaching a copy of my file.
Attachments:
Untitled 1.vi ‏25 KB

Your problem is the fact that you are converting it to an integer, thus loosing the fractional part. You need to use "Fract/Exp String To Number" instead and create a DBL so yor data is 23.3 instead of 23.
You also don't need to manipulate the string if the initial part is of constant lenght. Just use the offset input as in the figure below.
Message Edited by altenbach on 07-31-2006 07:02 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
ToDBL.png ‏2 KB

How to get a refund from Apple when the movie you paid for doesn't play?

Amyone have issues with their Apple TV not playing the movies you may have paid to download, but instead get error messages instead of a enjoyable evening watching a movie. Can you imagine the outroar if you paid to go into a movie theater and got an error message on the screen instead of the moive? Apple TV needs to issue recall notices similar to what GM is being faced with.
I will dispute the credit card payment to Apple but it isn't worth all the time and trouble you have to go to just to watch a movie at home.

Have you tried Settings>General>Restart on the Apple TV?
What troubleshooting have you done? Downloading anything over the internet can have issues. I have a Sony Blu Ray player with an Amazon connection. For the longest time, every time I started a movie on it, the movie would start, then hang up. Beyond irritating! Eventually I checked my internet speed and found out that it was pretty slow, so I had it ramped up. Haven't had problems since then. But, my point is, that the problem was not with Amazon or my Sony device - it was with my internet provider.
Lots of components, lots of places where a failure can occur....
Cheers,
GB

How get all record from master and matching record from detail

hi master
sir i have master detail table
i have many record in master table but some record in detail table how i get
all record from master and matching record from detail
such as
select m.accid,m.title,d.dr,d.cr from master m, detail d where m.accid=d.accid
this query not work that get only related record i need all record from master
please give me idea
thanking you
aamir

hi master
sir i have master detail table
i have many record in master table but some record in
detail table how i get
all record from master and matching record from
detail
such as
select m.accid,m.title,d.dr,d.cr from master m,
detail d where m.accid=d.accid
this query not work that get only related record i
need all record from master
please give me idea
thanking you
aamir
select m.accid,m.title,d.dr,d.cr
from master m, detail d
where m.accid=d.accid (+)The outer join operator (+) will get you all the details from master and any details from the detail if they exist, but the master details will still be got even if there are not details.
Note: Oracle 10g now supports ANSI standard outer joins as in:
select m.accid,m.title,d.dr,d.cr
from master m LEFT OUTER JOIN detail d on m.accid=d.accid

How to get selected value from selectOneRadio ???

Hi...i want to how to get selected value from selectOneRadio and use it in another page and in backing bean.
Note i have about 10 selectOneRadio group in one page i want to know value of each one of them.
Plzzzzzzzz i need help

You have a datatable in which each row is a question, correct?
Also in each row you have 5 possible answers that are in a radio, correct?
So,
You need to put in your datatable model, a question, and a list of answers (5 in yor case) and the selected one.
So you will have a get to the question, an SelectItem[] list to populate the radios and another get/set to the selected question.
ex:
<h:selectOneRadio value="#{notas.selectedString}" id="rb">
<f:selectItem itemValue="#{notas.valuesList}"/>
</h:selectOneRadio>
Search the web for examples like yours.

How to get the value from a JavaScript and send the same to Java file?

Hi.
How to get the value from a JavaScript (this JS is called when an action invoked) and send the value from the JS to a Java file?
Thanks and regards,
Leslie V

Yes, I am trying with web application.
In the below code, a variable 'message' carries the needed info. I would like to send this 'message' variable with the 'request'.
How to send this 'message' with and to the 'request'?
Thanks for the help :-)
The actual JS code is:
function productdeselection()
var i=0;
var j=0;
var deselectedproduct = new Array(5);
var message = "Are you sure to delete Product ";
mvi=document.forms[0].MVI;
mei=document.forms[0].MEI;
lpi=document.forms[0].LPI;
if(null != mvi)
++i;
if(null != mei )
++i;
if(null != lpi)
++i;
if(null != mvi && mvi.checked)
deselectedproduct[++j]="MVI?";
if(null != mei && mei.checked)
deselectedproduct[++j]="GAP?";
if(null != lpi && lpi.checked)
deselectedproduct[++j]="LPI?";
if( 0!=j)
if(i!=j)
for (x=0; x<deselectedproduct.length; x++)
if(null != deselectedproduct[x])
message =message+ "-" +deselectedproduct[x];
alert(message);
else
//alert(" You cannot remove all products!");
return false;
return true;
}

I have a Verizon IPhone 4 and i can't figure out how to get my ringtones from an app to my iTunes account, it doesn't have a tab for Ringtones! I have tried unplugging it and checking if would show up but it didn't, how do you enable the ringtone folder?

I have a verizon IPhone and i can't figure out how to get my ringtones from the app to iTunes, my account doesn't have a ringtone section in the liRingtone Folder?brary, how do you enable the ringtone folder?

Edit > Preferences. Select the check box for Ringtones, this will add them to the listing in iTunes.
Not sure that really answers your question though.

How to get Dolby Digital from ATV2 and iTunes Movies??

Similar Messages

Maybe you are looking for