How to get downgrade from Advanced configuration?

Hello. I just upgraded from 10.4.11 to Leopard Server. When I try to launch Server Preferences, I get the following message:
"Server Preferences can't be used with advanced configurations of Mac OS X Server."
All I have running is AFP and VPN. What do I need to do to make my server configuration a standard or workgroup configuration so I can access the Server Preferences?

Hi
With the Server Installation Disk you should have a small booklet. The booklet explains when upgrading (rather than clean installing) from a previous version of the Server (10.3 or 10.4) you don't get access to any other configuration other than Advanced.
The booklet goes on to explain what you need to do to go back to Standard or Workgroup.
In a nutshell it boils down to this. When clean installing (format and install) you can choose from one of three server modes/configurations: Standard, Workgroup, Advanced. If you choose Standard you can go to Workgroup and back again. If you choose Workgroup you can go to Standard and back again. If you go to Advanced from Standard or Workgroup you can't go back again unless you format and re-install.
http://images.apple.com/server/macosx/docs/ServerAdministration_v10.5_2ndEd.pdf
Explains more. The other Server Admin Manuals are available here:
http://www.apple.com/server/macosx/resources/
Tony

Similar Messages

How to get messages from IBM MQ in Oracle.

Hi ,
Can you please help me how to get messages from one IBM MQ to another IBM MQ in Oracle.
My requirement is Our upstream is putting messages from their IBM MQ to our IBM MQ
then we have to extract data from the message and load into Oracle database tables
how to implement this in oracle.
Is there any other way to implement this without writing any ORACLE PL/SQL programming.
Please help me.
Thanks.

You might want to use Oracle AQ: Integrating Oracle database applications with WebSphere MQ applications You will need to write some PL/SQL to Dequeue from Oracle AQ and convert the queue payload into insert statements.
If you need help wityh AQ, there is a separate forum: Advanced Queueing

How to get HttpSession from sessionID

          Hi,
          Can anyone tell me how to get HttpSession from a session ID?
          There used to be a HttpSessionContext class able to get the HttpSession, but it
          is depreciated.
          Thanks in advance


You'll have to track the sessions yourself; search this newsgroup for the
          session binding listener interface.
          Peace,
          Cameron Purdy
          Tangosol, Inc.
          http://www.tangosol.com/coherence.jsp
          Tangosol Coherence: Clustered Replicated Cache for Weblogic
          "Eric Wang" <[email protected]> wrote in message
          news:3e56ffa0$[email protected]..
          >
          > Hi,
          >
          > Can anyone tell me how to get HttpSession from a session ID?
          > There used to be a HttpSessionContext class able to get the HttpSession,
          but it
          > is depreciated.
          >
          > Thanks in advance
          >

How can I downgrade from 11.0 and re-install 10.7

How can I downgrade from 11.0 and re-install 10.7

First, reconsider your decision. 11.x isn't quite as user-friendly as 10.x, but it has pretty much the same functions are before (albeit in different places). Give it a few more days, and you might grow to like it. Future releases will only get better.
If you've made your decision, tap on this link:
http://www.emacconsulting.com/apple/itunes/downgrade-itunes-11-to-itunes-10-7/

How to get hostname from targetlist in custom deployment procedure?

When I make a simple procedure with a phase that will loop through a procedure hostname list
and a hostcmd or directive inside that will use the hostname ex change a configuration file. How to get hostname from the hostname targetlist?
I would rather not use $(hostname) or similar function if I can get the hostname from the target list.
Edited by: user476601 on 2012-09-06 05:59

I have tried that and cannot get it to work.
I have tried to make a procedure with:
parameter
- parallel fase
- step directive with hostname parm based on simple sh script (echo $hostname)
- map hostname setvalue %TargetName%
In a hostcmd step you cannot access %TargetName% directly
it doesn't work. Please come with an example if you have tried it.
/René

How do I downgrade from 6.1.2 to a lower version?

I am having a big problem. 6.1.2 won't let me activate my iPhone but from past experiences, 5.0.1 DOES. So, how do I downgrade from 6.1.2 to 5.0.1?
Kindest Regards, Lennert

LennertLeers wrote:
How do I get it officially unlocked?
Only the carrier your phone is locked to can authorize the phone's official unlocking.
How do I know what network it's locked to?
Ask your brother.
How do I hack it again?
Sorry, can't be discussed here.

How do I downgrade from ios6

I don't like apple maps. How do I downgrade from ios6 so I can get google maps and streetview again?

It's a pity one cannot downgrade, google maps streetview was really good.
My local underground station has a sign explaining "iphone ios6 users can get a paper map from the information stand". I believe someone wrote it on there. Did make me laugh. I hope Apple get to grips with their maps version, perhaps they could have waited until it was somewhat better. Anyway, thanks for the reply.

How do I downgrade from IOS6.0.0

How do I downgrade from IOS6.0.1?

zonarch wrote:
I'm also reading comments that after IO6 is installed, the battery life *****, apps don't work, and other such reports.
Search the forums, the same general comments appear after EVERY iOS update.
They are not unique to iOS 6 and are not an indication of an issue with iOS.
The vast majority of users never have any problems.
I personally have never experienced an issue upgrading any of my iPhones starting with the 3GS from iOS 3 up to my current device.
zonarch wrote:
Maybe I should get an Android.
Maybe you should.. then you can complain elsewhere.

I am using Iphone 5 ,How can i downgrade from IOS 7.0 to IOS 6 ?

I am using Iphone 5 ,How can i downgrade from iOS 7.0 to iOS 6 ?

Go to the Apple store and buy a new phone, the iPhone 5 (not the 5S) and you will probably get a phone with the IOS 6 interface.
But be aware that many apps will no longer be offering updates for the older IOS. You either have to move forward and stay in the past.
IOS 7 is just a change in the look, the functionality is still there. OSes have to move on, change. Otherwise the vendor gets accused of staying in the past. I find no problem in the update except for the changes in the Calendar. I spent $5.00 and got another calendar that does more and works better. I also got a better Notes program for a few bucks. For less than the cost of a dinner meal I was able to improve my phone experience. Rather than complain, I adapted. Problem solved.

How to get photos from mac to iPhone 6? when i try it just comes up iCloud instead of my photos

how to get photos from mac to iPhone 6? when i try it just comes up iCloud instead of my photos

Make sure Settings > iCloud > Photos > iCloud Photo Library (Beta) = "Off"
Then sync your iPhone using iTunes and make sure your sync settings for photos are set correctly in iTunes.

I got a new computer and don't know how to get music from ipod touch to itunes library

I recently got a new computer and don't know how to get music from my ipod touch to show on my itunes library.

You need to transfer the iTunes folder from the old computer to the new one.
iTunes: How to move your music to a new computer (Mac or Windows):
http://support.apple.com/kb/HT4527

I have a new MacAir and don't know how to get info from my USB stick and my SD photo card. Can anyone help me please?

I have a new MacBook Air and don't know how to get info from my USB stick and get info from my SD card. Can anyone help, please?

Plug the stick and/or card into the appropriate slots on the side of your Air. Do you see icons for the devices appear on the desktop? Click into them to see what files are there.
Matt

How to get data from a USB-UIRT device using Labview?

How to get data from a USB-UIRT device using Labview?
I'm trying to get data from a USB-UIRT device, is it posible with Labview?
I really appreciate your help,
thanks

You may want to contact the developer of the device for the API and DLL.
http://65.36.202.170/phpBB2/viewforum.php?f=3

How to get file from server while click on link

Hi,
i created on link and i gave one server path to select file from server but while clickinng on link it no displaying any thing.
following is the Destination url that i gave for the item.
/u08/app/appvis/xxex/inst/xxex_apps/xxrbe/logs/appl/conc/log/
please tell me how to get file from server while click on link.

Ok I got your requirement now.
If you are getting file names from view attribute then you should not be adding destination URI property for the link.
Instead you can use OADataBoundValueViewObject API.
Try below code in your controller processRequest method:
I am assuming that you are using classic table.
Also in below example it considers OAMessageStyleText and you can replace it with link item if you want.
OATableBean tableBean =
(OATableBean)webBean.findChildRecursive("<table item id>");
OAMessageStyledTextBean m= (OAMessageStyledTextBean)tableBean.findChildRecursive("<message styled text in table item id>");
OADataBoundValueViewObject tip1 = new OADataBoundValueViewObject(m, "/u08/app/appvis/xxex/inst/xxex_apps/xxrbe/logs/appl/conc/log/"+"<vo attr name which stores file name for each row>");
m.setAttributeValue(oracle.cabo.ui.UIConstants.DESTINATION_ATTR, tip1);
Regards,
Sandeep M.

How to get value from list item

Hi all,
How to get value from list item?
I have a problem with the List Item object
in the Oracle forms.
How can I retrieve the selected item from
a list ?
I didn't find any function like 'list.GET_
SELECTED_ITEM()'...
thanks
Bala

Hello,
You get the value as for any other Forms item:
:value := :block.list_tem ;Francois

How to get downgrade from Advanced configuration?

Similar Messages

Maybe you are looking for