How to get drivers and download drivers for my HP 2000-261NR notebook?

I need to download all the original drivers for my HP notebook so that they may be reinstalled on a new hard drive. The old hard drive failed.  A new harddrive and Windows 7 64 bit OS have already been installed. The HP support website locks up in a continuous loop when it says it is searching for drivers.  It's been almost an hour and it is still searching with no results showing. Here's a link to the page in question: http://support.hp.com/us-en/drivers/selfservice/hp-2000-200-notebook-pc-series/5091493/model/5119024#Z7_3054ICK0K8UDA0AQC11TA930O2 Been there for ages with nothing happening. In the past all we had to do was enter our model number and all the drivers available for download would be displayed. Why not the same thing now?

Hi  ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP 2000-216NR Notebook  and issues with the driver page. Here is a link to the driver page that might help. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. Here is a document on Hp Recovery Manager that will help you with any software and drivers that might need reinstalling. Hope this helps. Thanks.

Similar Messages

  • How do I find and download ACR for Elements 9

    Having trouble finding and downloading ACR for Elements 9

    ACR is only updated for a particular version of Elements until the new version of Elements comes out.  A new version of Elements comes out in the Aug-Oct timeframe of each year.  PSE 11 came out in the fall of 2012 so PSE 10 came out in the fall of 2011.  Look for the last version of ACR that came out before PSE 10 came out.  You can find the various versions of ACR for your computer’s OS by going to http://www.adobe.com/downloads/updates/ and choosing Camera Raw – your-computer-platorm at the top.  On the camera-raw versions page that comes up click on the links for a late-summer/early-fall 2011 version of ACR.  In my estimation this could be either 6.5 or 6.4 depending on whether PSE 9 was replaced by PSE 10 before or after 9/28/2011 when ACR 6.5 came out.  The way to check is that once you’ve clicked over to the download page for a particular version of ACR, there are two more links on that page, one for PSE and one for PRE and click the PSE one to see what version of Elements that version of ACR is for.  Check this until the version of PSE is higher than the one you have and then one back one version.

  • How to get drivers for HP Officejet Pro 8500

    I have an HP Officejet Pro 8500 in my network. It works with my pc, but how to get it working with my MacBook Pro?

    Go to the HP website and see if they have drivers available for OS X.

  • How to get drivers for photosmart 145

    Hi there, I have a Photosmart 145 and my OS is Windows 8. I would like to know if there are drivers for this printer for windows 8.

    Fernan215,
    The short answer is, "No, there are not drivers for this printer in Windows 8".
    The longer answer is, "It might work."
    There are not any drivers for Windows 7 for this little printer, but there is a possible workaround; that same workaround may be effective for Windows 8.  You can certainly try it.
    HP Photosmart 145 - Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection
    Note the caveat:
    Photosmart 130, 145, 230, 240 and 245Photosmart 330 *
    * Available only through Windows Update.
    How does one acquire the driver from Windows Update?  Hopefully, when you run Windows Update the necessary Drivers will be made available in the Operating System.
    ==================================================​=======================
    There are no guarantees, of course; the test is in the attempt.
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • Trigger how to get new and old value for nested table column?

    Hi,
    I have created a nested table based on the following details:
    CREATE TYPE typ_item AS OBJECT --create object
    (prodid NUMBER(5),
    price NUMBER(7,2) )
    CREATE TYPE typ_item_nst -- define nested table type
    AS TABLE OF typ_item
    CREATE TABLE pOrder ( -- create database table
    ordid NUMBER(5),
    supplier NUMBER(5),
    requester NUMBER(4),
    ordered DATE,
    items typ_item_nst)
    NESTED TABLE items STORE AS item_stor_tab
    INSERT INTO pOrder
    VALUES (800, 80, 8000, sysdate,
    typ_item_nst (typ_item (88, 888)));
    Now I would like to create a trigger on table pOrder for after insert or update or delete
    and I would like to track the new and old value for the columns inside nested table.
    Can anybody direct me how to do it?
    I would like to know the sytax for it like:
    declare
    x number;
    begin
    x := :new.nestedtablecolumn;--how to get the new and old value from nested table columns
    end;
    Hope my question is clear.
    Thanks,
    Lavan

    Hi,
    Try like this:
    CREATE OR REPLACE TRIGGER PORDER_I
    BEFORE INSERT
    ON PORDER
    REFERENCING OLD AS old NEW AS new
    FOR EACH ROW
    DECLARE
      items_new typ_item_nst;
      ordid_NEW NUMBER;
    BEGIN
    FOR i IN :new.items.FIRST .. :new.items.LAST LOOP -- For first to last element
      DBMS_OUTPUT.PUT_LINE(':new.items(' || I || ').prodid: ' || :new.items(I).prodid );
      DBMS_OUTPUT.PUT_LINE(':new.items(' || I || ').price:  ' || :new.items(I).price );
    END LOOP;
    END;Regards,
    Peter

  • How to get telephone and mobile phone for one partner

    Hello Expert,
    In VA03, I open one sales order and go into the partner tab. Then I selection one partner and click "Detail" button, one page with partner detailed information will pop up.
    In the pop-up window:
    There are two fields: Telephone and Mobile Phone.
    In my program, I want to get these two information. 
    I tried to call FM 'ADDR_COMM_GET' by passing address_number(VBPA-ADRNR), table_type('ADTEL'), iv_current_state(SPACE). For some partner, it works, but for others it doesn't work.
    Then I find table ADR2 which is used to keep phone infomration. There are two entries in the table. But how can I identity which one is telephone and which one is Mobile phone?
    So can any expert help me on how to get the telephone and Mobile Phone of the pop-up page?
    Thanks in advance,
    Best Regards, Johnny.

    Read ADR2-TEL_NUMBER where ADDRNUMBER = VBPA-ADRNR and R3_USER = '2' or '3'.
    These are the possible values
            Telephone is Landline Telephone
    1     Telephone is Default Under Landline Telephones
    2     Telephone is Mobile Telephone but Not Default Mobile Phone
    3     Telephone is Default Mobile Telephone
    X     Obsolete - No Longer Valid

  • My boyfriend purchased the new operating system for the mac book pro it was send to his email but we cant figure out how to get it and download it from the email

    how do we download our operating system purchase from our email it was sent to?

    You should have received a redemption code via email if you purchased Lion or Mountain Lion that would allow you to download the OS via the Mac App Store. If you purchased an earlier version it would come on discs, usually model-specific.
    Call back with some more information...
    Clinton
    MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • How to get user and system status for a trade promotion

    Hi,
    I have to develop a batch program to change user status and system status of all trade promotions which satisfy some criteria. This criteria checks some dates related to trade promotion(like Changed on,Pallett buying, buying horizon dates) also.
    I thought of first extracting all external ids from CGPL_PROJECTS table and then run trade promotion query. But how can I get current user & system status and all dates as these can be taken from relations "TPMStatusActiveRel" and "TPMDateRel". I don't know to take data from relations. Please help me with a piece of code.
    Thanks.

    Hello Shikha,
    You can use these relations here, as you are not in the Business Object layer anymore. As far as my understanding is, all the batch programs or reports should be done at the API layer. Try this code, to read the status of the Trade Promotion object.
    data: lr_appl_base type ref to CL_CRM_MKTPL_APPL_BASE,
            lt_sys_status type CGPL_ISTATUS_TEXT_T.
    lr_appl_base ?= CL_CRM_MKTPL_APPL_BASE=>GET_INSTANCE().
    " To read system status
    call method lr_appl_base->STATUS_READ
    exporting
    IM_MKTELEMENT_GUID = "your Trade promotion guid
    ET_TJ02T  = lt_sys_status.
    " To read user status
    call method lr_appl_base->STATUS_READ_EXTERN
    exporting
    IM_MKTELEMENT_GUID = "your Trade promotion guid
    ET_TJ02T  = lt_sys_status1.
    To change the user status, use the method STATUS_CHANGE_EXTERN of the same class
    To set the system status, use the method STATUS_SET of the same class.
    Hope this helps.
    Regards,
    Vinay

  • HT4623 how to use itunes and download IOS for the phone

    Hi
    Recentle i am having problem using whats app application, it says my IOS system does not support....how do i use the I-tunes to down load this into my phone.  Thanks

    Basically Yes...
    See this long Discussion...
    https://discussions.apple.com/message/20723017#20723017

  • How to install drivers for ati radeon 3200?and how to config xorg.co ?

    how to install drivers for ati radeon 3200?and how to config xorg.conf?

    mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
    Hello
    I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
    #pacman -Sy
    #pacman -S -l | grep -i catalyst
    #pacman -S catalyst catalyst-utils
    After installation reboot your machine in runlevel 1. (single mode).  Ensure "fglrx" module is loaded correctly using
    #lsmod | grep -i fglrx
    If the resultant output have "fglrx" part  the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
    #cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
    Then issue
    #aticonfig --initial --input=/etc/X11/xorg.conf
    This will create a new xorg.conf file. Now we can test our confign.
    #telinit 3
    I am using runlevel 3 to avoid graphic messup!!
    issue
    #gdm
    If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
    To know your ati driver is working correctly issue as root
    #fgl_glxgears
    If gears are rolling happily it seems correct. You can also know more about installed ati driver
    #fglrxinfo
    Now the installed driver version is in the output 
    If there is any problem try following
    ##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
    yes video playback is choppy until i ran :-
    sudo aticonfig --overlay-type=Xv
    Try adding the following to the 'Device' section in /etc/X11/xorg.conf
    Option "TexturedVideo" "true"
    ### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
    mythfrontend --geometry 800x600
    Append the "Device" Section of /etc/X11/xorg.conf file as follows;
    Section "Device"
    Identifier "Videocard0"
    Driver "fglrx"
    Option "OpenGLOverlay" "off"
    Option "VideoOverlay" "on"
    Option "TexturedVideo" "on"
    Option "TexturedVideoSync" "on"
    Option "Capabilities" "0x00000800"
    BusID "PCI:1:0:0"
    EndSection
    Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
    export LIBGL_ALWAYS_INDIRECT=true
    ####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
    ####### as in the following example
    title  Archlinux Ice Kernel
    root   (hd0,1)
    kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
    initrd /boot/kernel26-ice.img
    NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!!  ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
    Wish U good luck
    mvdvarrier

  • App store tried to update iBooks app. I can only see Newstand app on my screen and cannot get to bookstore. How can I delete and download the iBooks app again. iBook still appears in the settings menu as version 2.1   Tx iPad 2, iOS 5.0.1, iBooks 2.1

    App store tried to update iBooks app. I can only see Newstand app on my screen and cannot get to bookstore. How can I delete and download the iBooks app again. iBook still appears in the settings menu as version 2.1
    Tx
    iPad 2, iOS 5.0.1, iBooks 2.1

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • How can I purchase and download the standalone LR6 here at Hong Kong?  There's no such option for me instead of forcing me to use the CC!

    How can I purchase and download the standalone LR6 here at Hong Kong?  There's no such option for me instead of forcing me to use the CC!

    Try this link:
    http://www.adobe.com/products/catalog.html
    Otherwise I suggest you contact your local office for help:
    Hong Kong office
    Suite 4102, 41/F
    The Lee Gardens
    33 Hysan Avenue
    Causeway Bay
    Hong Kong
    Tel: +852 2916 2100
    Fax: +852 2970 2277

  • How can I view and download iprocurement history for the past 1 year in Oracle?

    Hi,
    I'm presently using Oracle 12, how can i view and download iprocurement history for the past 1 year or longer in Oracle? The purpose is to view approval of claims etc..
    if not, where can i retrieve this information in oracle?
    Appreciate your urgent assistance.
    Best Regards, Michael

    Sign into your Account > Click on your account name > Click on Account > Purchase History
    iTunes Store & Mac App Store: Seeing your purchase history and order numbers - http://support.apple.com/kb/HT2727
    Direct link - https://phobos.apple.com/WebObjects/MZFinance.woa/wa/purchaseHistory

  • Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

    Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

    Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

  • Have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for

    have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for her iphone. we need to save her photos, music, etc to ? icloud and the phone stuff to verizon cloud? so when she gets her new Iphone6 she can have all her "stuff" back on the new phone. hope this makes sense. please offer suggestions here or at [email protected] thanks for your help!

    Oh no! I'm sorry to see there's a lot of confusion here and data shared, x-rayDon. We can definitely work to fix. This happens when two devices share the same Apple ID, so she will need to reset hers. She can do so by assessing this link Apple - My Apple ID. You will need to decide who will keep the account if want separate Apple IDs since purchases cannot be shared unless you do Family Sharing.
    RobinD_VZW
    Follow us on twitter @VZWSupport

Maybe you are looking for