How to get dual 5ghz and 2.4ghz to work at same time

i am unable to get both 5ghz and 2.4 ghz to work at the same time - i only get options to use either one or the other - i have the AE xtreme -[bought when 1st came out] and the radio mode does not give me the option to choose both.

never mind i found the answer ... i didnt know they just came out with a new
aEBS ....

Similar Messages

How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

Thanks for digging out the facts.
You have a 1st Generation Time Capsule.
Your model can produce two bands....either 2.4 GHz or 5 GHz....but not both simultaneously.
You would need a Generation 2, 3 or 4 Time Capsule for simultaneous dual band capability.

How to get the Title and Tcode of a Program during run time

Hello,
I am new to abap and I have this question please. Is the a way to get the title, Tcode and Author of a program during run time? I would like to get the name and title of a program or a view or an include during run time.
Using table TADIR, you can only get the object_name and the author. Is the a way for me to get the Title of the repository object and any Tcode if any is available for the case of a program?
I loop forward for your respond.
Thank you.
Sabina

You can get it by accessing SYST.
SY-TITLE for Title
SY-TCODE for Tcode
I don't think there is any field in SYST for the Author.
To get the author name you can use the TRDIR table.
Regards,
Naimesh Patel

How to get all video clips to the organize at the same time

Hi,
I am a new user and I wonder how to get all video clips to the organize via Get Media or ?? at the same time. Now I have got it one after another and it is very slow.

My meaning is to get the clips from hard disk folder. No one after another but all the same time.

Sound and Vibrate does not work at same time

Hi Support,
I have recently purchased BlackBerry Z3.
It does not support Sound & Vibrate at same time.
In Normal mode, I have enabled Sound and Vibrate but it does only give sound for incoming calls/messages.
(does not vibrate)
In Vibrate Mode, it does only vibrate.
This is the first time I am using Blackberry and I am annoyed with the basic feature not working.
Please respond.
Regards,
Sunil.
Solved!
Go to Solution.

I'm glad things are back to normal for you.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

HT3775 Does anyone know how to get .mts files and mpg files to work in final cut express?

I am trying to import footage from a cannon xa10 but it wont come up in final cut express. The only files I have managed to get off the sd card are either .mts or .mpg files and these won't import into final cut. Any suggestions?

Barney & cjnz11, are you importing AVCHD lite?
FCE doesnt play nice with AVCHD lite with the Standard plugins, imovie on the other hand does (go figure) there is a fix for this.
1. Open the Final Cut Express.app by right clicking the icon and choose 'show content'. At Contents/Plugins you find a folder called: "AVCHD.RADPlug". compress this and keep it safe (Just incase)
2. Now Open the iMovie.app by right clicking the icon and choose 'show content' At Contents/RADPlugins there is a folder called "AVCHD.RADPlug". Copy that folder to where you found the folder with the same name inside the Final Cut Express.app
After that you will be able to Log & Transfer AVCHD Lite with in FCE instead of the imovie import and XML export method.

How can I import NEF and JPEG in Aperture at the same time from my D200

I have my D200 and shoot in RAW and JPEG.
why is it when I import in the library that I only see the NEF files and not the JPEG.
I want to import both the extensions, because I shoot all my pictures in RAW and JPEG and I only want to store the 4 and 5 stars rated pictures in NEF and lower rating I want to store just as JPEG.
Thanks for any help, Frank

You assume that I speak and write Dutch.
My apologies to all of you who don't/cannot read/understand Dutch. The following is in Dutch and not Double Dutch.
It explains in some detail how to setup a workflow in Automator for separating RAW and JPEG files and importing the result in Aperture.
If someone wants the explanation in English: post a message.
Ga naar
http://www.completedigitalphotography.com/?p=408#more-408
en haal de Separate Jpeg's action.
NB. Ik ken alleen de Engelse namen van de mappen.
Plaats de Separate Jpeg's action hier
~/Library/Automator
Automator
Automator opstarten
Kies Bestand, Nieuw
Paneel Library: selecteer Finder
Paneel Action : selecteer een sleep "Separate Jpeg's" naar Workflow paneel
selecteer en sleep "Get Folder Contents" naar Workflow paneel (einde)
Paneel Library : selecteer Automator (PAS OP: Automator wordt geladen; weg ermee)
Paneel Automator: selecteer en sleep Import Photos naar Workflow paneel (einde)
Opslaan als Finder Plugin in de map
~/Library/Workflow/Applications/Workflows/
Gebruik
Selecteer een map in Finder die RAW and JPEG bevat.
Ctrl-Click of rechts klikken
In het context menu navigeer naar Automator
Selecteer Separate JPEG's
De rest gaat nu automatisch
Succes
Berend

Touchpad and keyboard don't work at same time

Hi. I knew how to fix this problem on Windows 8 but can't seem to figure out how to fix it on Windows 8.1. I put the touchpad on no delay through change PC settings but it still seems to do this. Does anyone know how to fix it?

One of the fonts may be corrupt; to find out which, place half of the fonts on the desktop or inside a folder on the desktop and then try using the Internet again. If it works properly, one of those you removed was causing the issue. Repeat this process until you find the source of the problem; if that font doesn't cause the crash when it is in the Fonts folder, you may have installed too many fonts.
(10884)

How to get current month and last month dynamically??

how to get current month and last month dynamically
like
month = getCurrentMonth();
lastmonth = getcurrentMonth() -1;
please help
thanks

hi :-)
/* depracated but can be still useful */
java.util.Date dtCurrent = new java.util.Date();
int month = dtCurrent.getMonth();
int lastmonth = dtCurrent.getMonth() - 1;
System.out.println("* " + month);
System.out.println("* " + lastmonth);
/* better to use this one */
Calendar cal = new GregorianCalendar();
int imonth = cal.get(Calendar.MONTH);
int ilastmonth = cal.get(Calendar.MONTH) - 1;
System.out.println("*** " + imonth);
System.out.println("*** " + ilastmonth);
regards,

How to get automatic plant and shipping point and storage location

hi,
sap gurus,
how to get automatic plant and shipping point and storage location automatically into the sales order
i have done all the config settings for that
but its not appearing automatically.
regards,
balaji.t

Hi
Balaji...
U can get the plant in sales order, by doing the default the same in customer master or in material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
For S loc u have to enter manually in the sales order u can not get it automatically.
Hope this will help you.
Thx.

How to get count,index and compare to arraylists

hi
how to get count,index and comparing of 2 arraylist.... plz suggest me asap...

How is your question related to JDBC? And what have you done so far with your code?

How to get system status and user status ?

how to get system status and user status for the given production order?
In which PP table we can
find these?
Thanks&Regards
Satish

Hi Ram,
Use the FM "STATUS_READ" to read both the system and user statuses for an Order.
Alternatively, the following tables store the user and system status info:
JSTO- Status object information
JEST- Individual Object Status
Hope this helps.
Let me know if u need further information.
Regards,
Sonal

How to get customer number and name from the SD document

Hi All,
Can you please let me know how to get Customer Number and Name from the SD Document?
Thanks a lot....
Anil

Hi,
It will be displayed in the SD (BIlling document) itself, you clikc on the VF03. The customer name and number will also appear in the SO document also Tcode VA03
regards,
radhika
Edited by: kolipara radhika on Jul 10, 2009 5:32 AM

How to get total numbers and total price in query reports

Hi,
how to get total numbers and total price in query reports.for example:
particular item is issued 3 times a week...I need total quantity of item issued
my query...
SELECT T0.[DocNum], T1.[ItemCode], T1.[Quantity], T1.[Price] FROM OIGE T0 INNER JOIN IGE1 T1 ON T0.DocEntry = T1.DocEntry WHERE T1.[ItemCode] Like '%%[%1]%%' and T1.[U_WOType]='[%0]'

Hi,
Try this:
SELECT T1.[ItemCode], SUM (T1.[Quantity]) as [Total Quantity], SUM (T1.[Quantity] * T1.[Price]) as [Total Price] FROM OIGE T0 INNER JOIN IGE1 T1 ON T0.DocEntry = T1.DocEntry WHERE T1.[ItemCode] Like '%%[%1]%%' and T1.[U_WOType]='[%0]'
Group By T1.[ItemCode]
Beni.

How to get system date and time?

Can someone show me a code on how to get system date and time.
Thanks!

there is one really easy way to get system time, the api gives a great example of code on this. use gregorian calendar, which you'll find in the api under GregorianCalendar. You only need to create one instance of GC, ie Calendar time = new GregorianCalendar();
you save seconds, minute and hours into int values, so you don't have to access the system time every second, you can create a thread which adds one to the int second value, if oyu see what i mean, for example, i have saved the hours, minutes and seconds as int values;
int hour, minute, second;
i can then create a thread (Thread thread = new Thread(this) and run it like:
Calendar time;
int hour, minute, second;
Thread thread = null;
public MyTime() {
hour= time.get(Calendar.HOUR_OF_DAY);
minute = time.get(Calendar.MINUTE);
second = time.get(Calendar.SECOND);
if(thread == null) {
thread = new Thread(this);
thread.start();
public void run() {
Thread t = Thread.currentThread();
while(thread == t) {
thread.sleep(1000);
second++;
if(second > 59)
minute++;
if(minute>59)
hour++;
formatTime();
public void formatTime() {
second = (second > 59? 0 : second);
minute = (minute > 59? 0 : minute);
hour = (hour > 23? 0 : hour);
System.out.println(hour+":"+minute+":"+second);
public static void main(String[] args) {
new MyTime();
I know this looks like gibberish but it should work. If not, try to fix the problem, i have written from memory really but i guarantee you, this gets the time then every second, simply adds one to the second and then formats time. You can also access the day, month and year then format them using the above code. I don't like giving code since you should really do these things yourself but it is 2:04am, i have nothing better to do and i am not tired so i did you a favour - i have become what i always did not want to, someone ho stays upall night writing code.

How to get dual 5ghz and 2.4ghz to work at same time

Similar Messages

Maybe you are looking for