How to get each row between ranges
Hi,
How can i get the each row between range.
e.g
I have date range, 01012005 to 01012007.
I want to get all month and year in internal table between this range.
helpfull answers will be rewarded.
Thanks,
Message was edited by:
Sal Khan
data : begin of itab occurs 0,
month(2),
year(4),
end of itab.
data : lv_start type sy-datum,
lv_end type sy-datum.
lv_start = '20050101'.
lv_end = '20070101'.
while lv_start le lv_end.
itab-month = lv_start+4(2).
itab-year = lv_start+0(4).
append itab.
lv_start4(2) = lv_start4(2) + 1.
endwhile.
Similar Messages
-
How to get lines in between two fields in smartform
Dear Freinds,
I have developed one smart form however iam not getting output correct could you please help me out, the problem iam getting is iam not able to get the following things
in The Main Window
i have one header , one Main Area and one Footer Area
in the header i have created one %ROW1 and named as Row and again under the ROW i have
created a % Cell ...........again i want to create for the same Row iam not able to creeate another
Cell.........please let me know how i can have 5 or 6 cells for the same Row .
as i want the output as
UNit No. : 103 Quantity Req : 200 Date of Issue : 10/01/2008
Destination : Delhi Amount : 300 Rate/Per unit : 7
and secondly i have to have lines between the rows .... so please do let how to get lines in between rows as well..
i have tried allot but not able to get.
regds
madhuriHi Marcin Pciak ,
Thank you very much for giving me the solution, one more point i require in this regard
i have requirement as below
IDNo Invoice Amount
Despatch Date Despath Time.
Now i want i created Two Cell s (Cell A & Cell B) could you let me know how i can get IDNO and
Invoice Amount adjusacent to each other as above but right now iam getting in my smarform
IDNO
Invoice amount
but i want is IDNO-- Invoice Amount--
please help me this point
thanks once again for giving me answer.
regards
madhuri -
How to get each value from a parameter passed like this '(25,23,35,1)'
Hi
One of the parameter passed to the function is
FUNCTION f_main_facility(pi_flag_codes VARCHAR2) return gc_result_set AS
pi_flag_codes will be passed a value in this way '(25,23,35,1)'
How to get each value from the string
like 25 first time
23 second time
35 third time
1 fourth time
I need to build a select query with each value as shown below:-
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3, code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 25 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q1,
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3,code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 23 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q2,
(SELECT t2.org_id, RTRIM(xmlagg(xmlelement(e, t4.description || ';')
ORDER BY t4.description).EXTRACT('//text()'), ';') AS DESCRIPTION
from org_name t2, ref_org_name t3,code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 35 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date
group by t2.org_id) q3,
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3, code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 1 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q4
Please help me with extracting each alue from the parm '(25,23,35,1)' for the above purpose. Thank You.chris227 wrote:
I would propose the usage of regexp for readibiliy purposes and only in the case if this doesnt perform well, look at solutions using substr etc.
select
regexp_substr( '(25,23,35,1)', '\d+', 1, 1) s1
,regexp_substr( '(25,23,35,1)', '\d+', 1, 2) s2
,regexp_substr( '(25,23,35,1)', '\d+', 1, 3) s3
,regexp_substr( '(25,23,35,1)', '\d+', 1, 4) s4
from dual
S1 S2 S3 S4
"25" "23" "35" "1"In pl/sql you do something like l_val:= regexp_substr( '(25,23,35,1)', '\d+', 1, 1);
If t2.att_type is type of number you will do:
t2.att_type= to_number(regexp_substr( '(25,23,35,1)', '\d+', 1, 1))Edited by: chris227 on 01.03.2013 08:00Sir,
I am using oracle 10g.
In the process of getting each number from the parm '(25,23,35,1)' , I also need the position of the number
say 25 is at 1 position.
23 is at 2
35 is at 3
1 is at 4.
the reason I need that is when I build seperate select for each value, I need to add the query number at the end of the select query.
Please see the code I wrote for it, But the select query is having error:-
BEGIN
IF(pi_flag_codes IS NOT NULL) THEN
SELECT length(V_CNT) - length(replace(V_CNT,',','')) FROM+ ----> the compiler gives an error for this select query : PLS-00428:
*(SELECT '(25,23,35,1)' V_CNT FROM dual);*
DBMS_OUTPUT.PUT_LINE(V_CNT);
-- V_CNT := 3;
FOR L_CNT IN 0..V_CNT LOOP
if L_CNT=0 then
V_S_POS:=1;
V_E_POS:=instr(pi_flag_codes, ',', 1, 1)-1;
else
V_S_POS:=instr(pi_flag_codes,',',1,L_CNT)+1;
V_E_POS:=instr(pi_flag_codes, ',', 1, L_CNT+1)-V_S_POS;
end if;
if L_CNT=V_CNT then
V_ID:=TO_NUMBER(substr(pi_flag_codes,V_S_POS));
else
V_ID:=TO_NUMBER(substr(pi_flag_codes,V_S_POS,V_E_POS));
end if;
VN_ATYPE := ' t2.att_type = ' || V_ID;
rec_count := rec_count +1;
query_no := 'Q' || rec_count;
Pls help me with fetching each value to build the where cond of the select query along with the query number.
Thank You. -
How to get the link between mara, ausp, cawn and cawnt tables
hello ABAPERS
i have got a requiremet in that i have to get the relation .
how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp and mara tables.
I would be very thankful for ur help in advance.
Thanks & Regards.
soniHi,
Sample report using the linkage between tables;
report batch_char no standard page heading
line-size 132
line-count 58(1)
message-id mm.
Report by Batch Characteristic *
Description : Report by Batch Characteristic *
Declaration for Tables
tables: mara, " Material Master
mard, " Storage Location Data for Material
t001w, " Plants/Branches
t001l, " Storage Locations
cabn, " Characteristics
inob. " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023', " Class Type
c_obtab like inob-obtab value 'MCH1', " Database Table
c_flag type c value 'X', " Flag
c_c23 type i value '23', " Ratio
Constants for Ratio Categories
c_13 type p decimals 2 value '13.00', " For Ratio 13
c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
c_15 type p decimals 2 value '15.00', " For Ratio 15
c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
c_17 type p decimals 2 value '17.00', " For Ratio 17
c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
c_19 type p decimals 2 value '19.00', " For Ratio 19
c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
c_21 type p decimals 2 value '21.00', " For Ratio 21
c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
c_23 type p decimals 2 value '23.00', " For Ratio 23
c_g23(4) type c value '>=23', " For Ratio >=23
c_ratio(5) value 'RATIO', " For Ratio
Constants for Storing Selected item field information
c_cursor1(15) value 'I_OUTPUT1-MEINS', " For Selected Base
" Unit of Measure
c_cursor2(15) value 'I_OUTPUT1-MATNR', " For Selected Base
" Material Number
c_cursor3(15) value 'I_OUTPUT1-MAKTX', " For Selected Base
" Material Des.
c_cursor4(15) value 'I_OUTPUT1-CLABS', "For Selected Base
" Stock Value
c_cursor5(15) value 'I_OUTPUT1-ATFLV', " For Selected Base
" Char.Value (Ratio)
c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c, " Flag
g_clabs1(16) type c, " Quantity
g_clabs(18) type c, " Quantity
g_cursor(15) type c, " Cursor field name
g_matnr type mara-matnr, " Material Number
g_werks type mchb-werks, " Plant
g_atinn(30) type c. " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
matnr like mchb-matnr, " Material Number
werks like mchb-werks, " Plant
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Unit of measure
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
atinn like ausp-atinn, " Char.Value
clabs like mchb-clabs, " Stock Value
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
werks like t001w-werks, " Plant
name1 like t001w-name1, " Name
end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
matnr like makt-matnr, " Material
maktx like makt-maktx, " Description
end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
objek like ausp-objek, " Object No
atinn like cabn-atinn, " Characteric value
atflv like ausp-atflv, " Characteristic Value
end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv like ausp-atflv, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv(32) type c, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output1.
Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
s_lgort for t001l-lgort, " Stor.Location
s_matnr for mara-matnr obligatory, " Material No
s_atinn for cabn-atinn. " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
select werks
into t001w-werks
from t001w
up to 1 rows
where werks in s_werks.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Plant'(002).
endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
select matnr
into mara-matnr
from mara
up to 1 rows
where matnr in s_matnr.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Material'(003).
endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
select lgort
into t001l-lgort
from t001l
up to 1 rows
where lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Storage Location'(004).
endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
select atinn
into cabn-atinn
from cabn
up to 1 rows
where atinn in s_atinn.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Characteristic Value'(005).
endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
into (mard-matnr, mard-werks, mard-lgort)
from mard
up to 1 rows
where matnr in s_matnr and
werks in s_werks and
lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform. "validate_screen
*& Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
exporting
repid = l_repid
heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18) 'Material Number'(008) centered,
20 sy-vline, 21(40) 'Material Description'(011) centered,
61 sy-vline, 62(22) 'Ratio'(009) centered,
84 sy-vline, 85(18) 'Quantity'(010) centered,
103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform. "get_headings
*& Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr " Material Number
b~werks " Plant
b~lgort " Storage Location
b~charg " Batch Number
b~clabs " Stock Value
a~meins " Base Unit of Measure
into table i_mchb
from mara as a inner join mchb as b
on amatnr eq bmatnr
where b~matnr in s_matnr and
b~werks in s_werks and
b~lgort in s_lgort.
if sy-subrc <> 0.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform. " get_mat_stock_data
*& Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
clear i_plant.
refresh i_plant.
select werks " Plant
name1 " Name
into table i_plant
from t001w
for all entries in i_mchb
where werks = i_mchb-werks.
Get the Material Description from MAKT Table
clear i_makt.
refresh i_makt.
select matnr " Material number
maktx " Material Description
into table i_makt
from makt
for all entries in i_mchb
where matnr = i_mchb-matnr and
spras = sy-langu.
sort i_plant by werks.
delete adjacent duplicates from i_plant comparing werks.
sort i_makt by matnr.
delete adjacent duplicates from i_makt comparing matnr.
endif.
endform. "form get_plant_grp_data.
*& Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
l_tabix like sy-tabix.
if not i_mchb[] is initial.
loop at i_mchb.
l_tabix = sy-tabix.
clear l_matbatch.
concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
read table i_plant with key werks = i_mchb-werks binary search.
if sy-subrc = 0.
i_output-name1 = i_plant-name1.
endif.
Get the Material Description from i_makt Table
read table i_makt with key matnr = i_mchb-matnr binary search.
if sy-subrc = 0.
i_output-maktx = i_makt-maktx.
endif.
Get the Characteristic Values data from INOB and AUSP Tables
clear inob.
select single cuobj from inob
into inob-cuobj
where klart = c_klart and
obtab = c_obtab and
objek = l_matbatch.
if sy-subrc = 0.
select objek
atinn
atflv
from ausp
into table i_ausp
where objek = inob-cuobj and
atinn in s_atinn and
klart = c_klart.
sort i_ausp by objek atinn.
loop at i_ausp.
clear cabn.
select single atinn atnam from cabn
into (cabn-atinn,cabn-atnam)
where atinn = i_ausp-atinn.
if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
if cabn-atnam cs c_ratio.
if i_ausp-atflv between c_13 and c_1499.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_ausp-atflv between c_15 and c_1699.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_ausp-atflv between c_17 and c_1899.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_ausp-atflv between c_19 and c_2099.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_ausp-atflv between c_21 and c_2299.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_ausp-atflv >= c_23.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_23.
endif. " Condition for RATIO values
else. " If characteristic does contain RATIO
i_mchb-atflv = i_ausp-atflv.
endif.
i_output-atinn = cabn-atinn.
i_output-atnam = cabn-atnam.
i_output-atflv = i_ausp-atflv.
i_mchb1-matnr = i_mchb-matnr.
i_mchb1-werks = i_mchb-werks.
i_mchb1-lgort = i_mchb-lgort.
i_mchb1-charg = i_mchb-charg.
i_mchb1-clabs = i_mchb-clabs.
i_mchb1-atinn = i_ausp-atinn.
i_mchb1-atflo = i_mchb-atflv.
i_mchb1-atflv = i_ausp-atflv.
append : i_output, i_mchb1.
clear i_mchb1.
modify i_mchb index l_tabix transporting atflo atflv .
endif.
endloop.
endif.
endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
sort i_output by atinn werks matnr atflv.
else.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform. "append_final_data
*& Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
l_tabix = sy-tabix.
At new Characteristic
at new atinn.
read table i_output1 index l_tabix.
format color 1 intensified on.
write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
23(40) i_output1-atnam,
125 sy-vline.
format color off.
format color 4 intensified on.
write: /1 sy-vline, 2(20) 'Plant Name :'(022),
23(4) i_output1-werks, 29(30) i_output1-name1,
125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
clear: g_clabs, g_clabs1.
format color col_normal.
write :/1 sy-vline, 2(18) i_output1-matnr,
20 sy-vline, 21(40) i_output1-maktx,
61 sy-vline.
if i_output1-atflv = c_c23.
write: 62(22) c_g23 centered.
else.
shift i_output1-atflv left deleting leading space.
write: 62(22) i_output1-atflv centered.
endif.
write: 84 sy-vline,
103 sy-vline,
110(5) i_output1-meins.
If the quantity value is negative
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
hide : i_output1.
new-line.
At end of material
at end of matnr.
sum.
move : i_output1-matnr to g_matnr.
format color 3 intensified on.
write /1(125) sy-uline.
write :/1 sy-vline, 2(25) 'Total for Material :'(012),
28(18) g_matnr.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
write: 125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
At end of plant
at end of werks.
sum.
move : i_output1-werks to g_werks.
format color 3 intensified off.
write :/1 sy-vline, 2(25) 'Total for Plant :'(013),
28(4) g_werks.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
At end of characteristic
at end of atinn.
read table i_output1 index l_tabix.
sum.
format color 3 intensified on.
write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
28(25) i_output1-atnam.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
endloop.
endform. " display_report
*& Form DISPLAY_BATCH
Display the batch details for the seclected material *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
g_cursor = c_cursor2 or
g_cursor = c_cursor3 or
g_cursor = c_cursor4 or
g_cursor = c_cursor5 or
g_cursor = c_cursor6.
format color 3.
write: /1 sy-vline,
2(17) 'Material Number :'(020),
20(17) i_output1-matnr,
94 sy-vline.
format color off.
write /1(94) sy-uline.
loop at i_mchb1 where matnr = i_output1-matnr and
atinn = i_output1-atinn and
atflo = i_output1-atflv.
format color col_normal.
shift i_mchb1-charg left deleting leading '0'.
write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
18 sy-vline, 19(17) i_mchb1-charg centered,
36 sy-vline.
if i_output1-atnam cs c_ratio.
write: 37(29) i_mchb1-atflv
exponent 0 decimals 2 centered.
else.
write : 37(29) i_mchb1-atflv
exponent 0 decimals 0 centered.
endif.
write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
94 sy-vline.
format color off.
endloop.
write /1(94) sy-uline.
else.
message s899 with 'Invalid cursor position'(016).
exit.
endif.
endform. " DISPLAY_BATCH
*& Form HEADING_SECLIST
Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
18 sy-vline, 19(17) 'Batch Number'(017) centered,
36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
66 sy-vline, 67(27) 'Quantity'(019) centered,
94 sy-vline.
write /1(94) sy-uline.
format color off.
endform. " HEADING_SECLIST
*& Form COLLECT_RATIO
Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
clear g_atinn.
i_output1-atinn = i_output-atinn.
i_output1-atnam = i_output-atnam .
i_output1-werks = i_output-werks.
i_output1-name1 = i_output-name1.
i_output1-matnr = i_output-matnr.
i_output1-maktx = i_output-maktx.
i_output1-clabs = i_output-clabs.
i_output1-meins = i_output-meins.
call function 'CONVERSION_EXIT_ATINN_OUTPUT'
exporting
input = i_output-atinn
importing
output = g_atinn.
if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
if i_output-atflv between c_13 and c_1499.
i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_output-atflv between c_15 and c_1699.
i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_output-atflv between c_17 and c_1899.
i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_output-atflv between c_19 and c_2099.
i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_output-atflv between c_21 and c_2299.
i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_output-atflv >= c_23.
i_output1-atflv = c_23.
endif.
write i_output1-atflv to i_output1-atflv .
else.
write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
endif.
collect i_output1.
clear i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform. " COLLECT_RATIO
Reward if useful..
Regards,
Anji -
How to get current row data in table control
Hi , expert ,
I am professional in oracle , but now I am a new guy in SAP ABAP .
I have a question in UI
How to get current row data and click pushbutton in table control to open next screen ?
I want to get the current data and open next screen to carry out detail detail .
Thansk for all your suggestion .GET CURSOR LINE SY-CUROW .
READ TABLE internal_table index SY-CUROW. -
How to get selected row index of a Table ?
hi gurus,I'm new to Webdynpro for abap
I'm displaying just Flight details in a Table so
how to get selected row index of a Table and need to be display in Message manager.Hi,
For getting the row index use the following code.
DATA lo_nd_node TYPE REF TO if_wd_context_node.
DATA lo_el_node TYPE REF TO if_wd_context_element.
DATA index TYPE i.
* navigate from <CONTEXT> to <NODE> via lead selection
lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_node ).
lo_el_node = lo_nd_node->get_lead_selection( ).
index = lo_el_node->get_index( ).
node is the name of the node which is binded to the table.
For printing the message u can use code wizard.
Press ctrl-F7. Now Select generate message.
IN this select the method REPORT_SUCCESS
In the code now u can give index to Message text Exporting parameter. Comment receiving parameter.
Write the whole code in onLeadSelect of the table.
Regards,
Pankaj Aggarwal -
How to get all rows in table to red using alternate rows properties option
How to get all rows in table to red using alternate rows properties option
Hi Khrisna,
You can get all rows red by selecting the color red in the "Color" and "frequency" to 1 under the "Alternate Row/Column colors".
I tried doing it and the colors freaked me out (all red) :-D
Kindly tell me if im missing something.
Regards,
John Vincent -
how to get each node in tree?
Message was edited by:
NikisinProblemhow to get each node in tree?
Since (as far as I know) treeNode is an interface, the real question to me is how are you implementing your treeNodes? Are you overriding the toString() method? -
How to get selected row keys from RichSelectManyCheckbox
Adf Table has getSelectedRowKeys but SelectManyChekcbox does not has anything similar. Can you tell me how to get selected row keys programmatically for RichSelectManyCheckbox?
Hi User,
selectManyCheckbox component's value property holds the selected items values. Bind this property to some bean variable(of type list) so that you can get the selected values by accessing the bean property.
Sireesha -
How to get selected row data of an ADF table in HashMap?
Hi,
Can anyone please tell me how to selected row data of an ADF table in HashMap like :
Object obj = pageTable.getSelectedRowData();
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)obj;
Now in above code I want the convert rowData in HashMap.
Can anyone please tell me how to do that? Its urgent.
Thanks,
VikVik,
No need to ask the same question 3 times...
In [url http://forums.oracle.com/forums/message.jspa?messageID=4590586]this post, Nick showed you how to get the Row.
If it were so urgent, you could have done a little reading of the javadocs to come up with code like this (not tested, up to you to do that)
HashMap m = new HashMap();
Row r = get it like Nick showed you to;
Object values[]=r.getAttributeValues();
String names[]=r.getAttributeNames();
for (int i=0; i<r.getAttributeCount(); i++)
m.put(names, values[i]); -
How to get fourthly row (row4) first column value (col1) in matrix
Hi to all,
In FMS, how to get fourthly row (row4) first column value (col1) in matrix in document.
select $[$38.1.4]
But it display the first row
Please give me hint.
Thank youHi Eric,
FMS may only apply to current row. There is no way to get any other fixed row.
Thanks,
Gordon -
How to get the row Count of a ResultSet
How to get the row Count of a ResultSet
Hi
I'v tried rennie1's way ,but I only get zero,my code is:
rs.executeQuery("select count(*) from t_test");
if (rs.next()) int rowCount=rs.getInt(1);
I also tried barni's way ,but the method rs.last() and rs.beforeFirst() throw a same Exception
I tried another way,the code is:
while rs.next(){
// Do nothing ,just move the cursour to the last row
int rowCount=rs.getRow()
However,the rowCount still equal zero
Any help would be greatly apprecite!
note:
I get connection by DataSource's JNDI name from client, the Server is Weblogic Server 6, the DBMS is Oracle. -
How to get the Vendor Sub Range details
Hi
Can you please let me know, how to get the vendor sub range from SAP tables?
Thanks
RKHi,
For Vendor Sub-Range table, please refer to Table WYT1.
Regards,
Nazrin -
How to get the link between MCH1, AUSP, CAWN and CAWNT tables
Hi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
KumarHi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
Kumar -
How to get each thread in the threadpool
Hi,everyone.I'm now learning java.util.concurrent package and I have two questions about the threadpool.
1) How to get each thread in the threadpool;
2) How to get each thread's data in the threadpool and dispaly them onto GUI;
e.g :
There are 5 threads in the threadpool(ThreadPoolExecutor) and I have 100 tasks(Runnable or Callable),every task scans a directory(every task scans a different directory),how can I display the "real-time" count of the files in the directory which the current 5 threads in the threadpool scan onto the ListView Items in the GUI?Willings wrote:
Hi,everyone.I'm now learning java.util.concurrent package and I have two questions about the threadpool.
1) How to get each thread in the threadpool;You don't
2) How to get each thread's data in the threadpool and dispaly them onto GUI;
e.g : You don't
There are 5 threads in the threadpool(ThreadPoolExecutor) and I have 100 tasks(Runnable or Callable),every task scans a directory(every task scans a different directory),how can I display the "real-time" count of the files in the directory which the current 5 threads in the threadpool scan onto the ListView Items in the GUI?You should notify your "monitor" when you add something to the pool, and the Runnable/Callable should notify the same "monitor" when it starts to execute, and during its processing. Finally you notify the monitor when the execution has completed.
Kaj
Maybe you are looking for
-
I can't watch the youtube on my iPod touch because "the server is not correctly configured" what should I do in this case?
-
Preview and output in Encore cs5 quality, not close to preview in Premiere Pro CS5
I am working on a project and in Premiere Pro the preview looks fantastic. Sequence that I am dealing with is AVCHD 1080i. When I send the sequence to Encore via Dynamic Link, the preview is fuzzy, not sharp and out of focus. Not only is the p
-
Calling repaint from other Class file.
Hi, First of all i am pretty new to Java so I hope you understand what I am trying to explain.. I am trying to create an applet which draws some polygons on the screen. For the drawing of these polygons I have created another class which is located i
-
2nd time in less than a week ! Some games and Game Center not opening AFTER the battery fully drained. Last time, a pro on here told me to try hitting the sleep/wake button and home screen button till apple icon came up and that worked. This time it
-
Adding a person to a 3D rendered photo
Hi. I'm new to Photoshop CC (Just had Photoshop Elements 11) So, to the question. I wanna edit a photo of myself to a Background photo. I know how to get myself in there, but how do I make it look realistic? with the same light and colors that are in