How to get Equipment No. for particular contract no.

Hi All,
How do I link tables to get Equnr no. with particular Contract no.(VBELN)?

You Can try using the serial number as the link.
regards
Biju

Similar Messages

How to get the focus of particular UI Element

Hi All,
How to get the focus of particular UI Element in webdynpro Page,
I have a page where i am creating a ALV, I want to get that keyboard focus is on that element is there or not?
Can anyone please give some update?
Best regards,
Rohit

I would suggest try invoking REFRESH of ALV on the ON_CELL_ACTION event.
Below excerpt is from Thomas
The Events of inner UI elements are not exposed directly as they normally would be if they were standalone. Generally you can capture them using either the
ON_DATA_CHECK:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c8/6c80dbedfe42d1a93f8e6df1d7244a/frameset.htm
This gets trigger for any press of ENTER, so it generally works like the Input Field onEnter.
You could also consider ON_CELL_ACTION:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/12093591152464e10000000a1553f7/frameset.htm
It is a higher level Event that encompasses both ON_DATA_CHECK and ON_CLICK.
if you want to capture & refresh on some hot key combination then refer to this thread
[https://www.sdn.sap.com/irj/scn/profile?editmode=true&userid=3760417]

How to get keys of a particular type

Following are my objects:
DepartmentKey - primary key is departmentName, a String
Department
EmployeeKey - primary key is employeeId, an integer
Employee
I have 5 DepartmentKey-Department key-value entries in a cache and 2000 EmployeeKey-Employee key-value entries in the same cache.
How do I get all the DepartmentKeys from the cache? In general, how to get keys of a particular type (class name)?
Thanks
Ghanshyam

I guess I am deeply off track regarding the general approach towards storing items in the cache.
Following is my problem domain:
A Merchant is any establishment that accepts credit cards. (It could be the local Subway down the street or Macy's, etc.). A Transaction is a credit card transaction.
public class Merchant implements Serializable{
private String merchantId; // primary key
private double averageTxnAmount;
private double totalTxnAmount;
private long totalTxnCount;
public class Transaction implements Serializable{
private String merchantId; // merchant that originated the txn
private double amount;
private Timestamp txnTime;
private String txnType; // sale, return, etc.
public class MerchantKey implements Serializable, KeyAssociation{
private String merchantId;
public Object getAssociatedKey{
return merchantId;
public class TransactionKey implements Serializable, KeyAssociation{
private String merchantId;
private Timestamp txnTime;
private double amount;
public Object getAssociatedKey{
return merchantId;
I want to update a merchant's average txn amount as transactions come in.
Let's say I have a million merchants in a partitioned cache cluster spread across some machines.
Transactions come into the cluster quite rapidly, say tens in a second. The process that inserts the transaction into the cluster must also update the merchant to which the transaction belongs, as follows:
Transaction t = ...
cache.put(tKey, t); // store the transaction into the cache
MerchantKey mKey = new MerchantKey(txn.getMerchantId());
Merchant m = (Merchant)cache.get(mKey);
// update the merchant's avg txn amt
m.setAverageTxnAmount((txn.getAmount() + m.getTotalTxnAmount())/m.getTotalTxnCount() + 1);
m.setTotalCount(m.getTotalCount() + 1);
// store the updated merchant back into cache
cache.put(mKey, m);
OR
Transaction t = ...
cache.put(tKey, t); // store the transaction into the cache
MerchantKey mKey = new MerchantKey(txn.getMerchantId());
Merchant m = (Merchant)cache.get(mKey);
MerchantUpdater agent = new MerchantUpdater(t);
cache.invoke(mKey, agent);
public class MerchantUpdater implements AbstractProcessor{
public Object process(Entry entry){
Merchant m = (Merchant)entry.getValue();
// update m's avg txn amt, total count using t
entry.setValue(m);
The basic idea is to store all merchants and all transactions (which could be tens of millions in a day) for a day in memory and to update the merchant objects as transactions come in throughout the day. The above example shows updating just the merchant's average txn amount, but in reality, it could be updating a number of things about the merchant.
Am I using the api in the right spirit or is my approach seriously whacked? Can you please comment?
Thanks
Ghanshyam

How to get more features for Captivate 6

Hi all,
I've installed Captivate 6 on my laptop at work, I use it for creating training material for our project management system. I was just looking at some Adobe video tutorial and there are some features shown in the videos that I can't find on my captivate (for example Drag and Drop interaction, some particular widget like "Hangman" etc...). I tried to download them, clicking on the "Download more interactions" but there are any available. So, is there a way to get those features, at least those shown in your video tutorial for Captivate 6?
Thank you very much
Elena

Hello,
thank you for your answer.
I have the version 6.0, so maybe I can't get those features because of the version that I have.
Even if I click on "Download more" on the Interactions window, there are no Interactions available, but is it a problem related to my version or it's because there aren't available new features?
Thank you very much,
Elena Bettarini
Date: Thu, 14 Nov 2013 00:40:11 -0800
From: [email protected]
To: [email protected]
Subject: How to get more features for Captivate 6
    Re: How to get more features for Captivate 6
    created by Lilybiri in Adobe Captivate - View the full discussion
Hello and welcome,
I cannot remember for the Hangman interaction anymore, but Drag&Drop was only available for subscription users, for version 6.1.0.3190 Maybe it was not clear in the video you are pointing at, that not all features were available for box licenses. Which version do you have?
Lilybiri
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5841167#5841167
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5841167#5841167
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5841167#5841167. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Captivate at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to get internet settins for i phone4

how to get internet settins for i phone4

An Apple AirPort is a router, so you're covered there. The only other device required is a modem, and there are many of them from which to choose. Does your ISP supply one, and if so, can you determine its model number?
Modems can be purchased for $30. You first need to ask your ISP what equipment they plan to supply, if anything. Modems are commonly supplied for $0, to be returned if and when you cancel their service. Some ISPs want to supply a modem but charge you a rental fee. Whatever that fee is, it's not worth it.

How to find Info objects for particular filed??

Hi
I hav doubt Can anyone tel me???
My Query s <b>How to find Info objects for particular filed??</b>
For example i hav some table fileds, how to find Info objects for that fields??
Pls explain me detaily
Points wil be given for all answers.
Thanks
Senthil

Hi Senthil ,
You have your field description along with your Field right.
For example:MATNR - Material Number
Now take this description and go to your BW side Tcode:RSA1
1)Search in Modelling >> Infoobjects >> Material Number
Then you get few hits (matches) which have description matched.
For Example: 0material - Material Number
Check for the Length and type match.
You will understand once you get those hits as to which is related to yours.
2)Go to BI content and search in the infoobjects this has all active and inactive objects but this takes a little time (not much though).
3) You have meta data search / simple search also where you can search for the objects with field description as matching criteria.
Hope your doubt is cleared atleast to some extent.
Assign Points if helpful.
Thanks,
Priyanka

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

A^b = n ,How to get the value for a ?

a^b = n ===> n = Math.pow(a,b)
How to get the value for a ?
dose Java have API to get the value for a ?
Thanks for help~~~

a^b = n
=>
a = n^(1/b)
So,
a = Math.pow(n,1.0/b)

How to Get Missing Dates for Each Support Ticket In My Query?

Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!

CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

How to get the date for the first monday of each month

Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AM

Use IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
select sysdate current_date,
        trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
          select add_months(date '2013-1-1',level-1) dt
            from dual
            connect by level <= 12
select dt first_of_the_month,
        trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY.

Qry:How to get different price for each price list (variable area) in order

1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]

Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen

How to get column names for a specific view in the scheme?

how to get column names for a specific view in the scheme?
TIA
Don't have DD on the wall anymore....

or this?
SQL> select text from ALL_VIEWS
2 where VIEW_NAME
3 ='EMP_VIEW';
TEXT
SELECT empno,ename FROM EMP
WHERE empno=10

How to configure release procedure for rate contracts release

Dear all,
How to configure release procedure for rate contract following are the requirements
they are two release codes c1 & c2 <=100000,>=100000
                if c1 is not there c2 has to be approved
     Change in the value of the rate contract contract
     Change in the validity of the rate contract
     Addition of deletion of line items
While using a non u2013 released rate contract in the PO an error message should shoot out.
Also the logic should be changed while using the rate contract in the PO.
The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
It should be possible to refer existing valid rate contracts in purchase orders.
Regards,
bhaskar

Hi,
In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
class in standard is the same FRG_EKKO, you can use the same for contract.
To distinguish if it's a contract or PO, EKKO-BSART can be used.
For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
You can restrict the document type to set up the release strategy for only contract.
Of cause, you can also create your own release class Z* for contract copying standard
one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
OLME:
-> contract
->Release Procedure for Contracts
->Define Release Procedure for Contracts
->Release Groups
If you have already created the PO release class.
Assign a new chracteristic of Document Category -BSTYP
Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

How to get Alerts mail for adapter engine errors in SAP PI 7.0

Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.

Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed.

How to get the ItemKey for a Workflow triggered by an event in Oracle Apps

Hello,
I have added a custom sub process to the seeded "OM Order Header" workflow. The process sends a notification. There are a few attributes in the body of the message tied to this notification, to which I am trying to assign values to using the syntax:
SetItemAttrText (itemtype, itemkey, attrname, attrvalue).
I have the internal names for the item type and attribute name, but don't know how to get the value for the item key. I understand the item key is supposed to be unique for each item type and is automatically generated by the workflow engine when the work flow fires. Is there a built-in function or some means to get this value?
Regards,
Smita

Have you tried to query WF_ITEMS? -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=WF_ITEMS&c_owner=APPLSYS&c_type=TABLE
bde_wf_item.sql - Runtime Data of a Single Workflow Item [ID 187071.1]
Thanks,
Hussein

How to get Equipment No. for particular contract no.

Similar Messages

Maybe you are looking for