How to get files of a dmg thats not recognized after a drive recovery

I just had to recover my hard drive I managed to recover my .dmg files that I created with a pass word using disk Image. Now when I go to open the dmg it ask me for the pass word I type it in and get this message ....Unable to attach "C-00055.dmg."(not recognized) so my problem is how to I fix this or get my files out of the dmg? its showing me that 50Gb witch is the correct size of the dmg I created I have done all the disk utility crap everyone keeps posting I need a real solution to this problem Im not familiar with the Terminal but if some one has a way to do it using the mac Terinal I dont have a problem using it if your instructions are clear.
Thanks .

You would need to restore your phone as a new device in iTunes, not from back up, that's the only way to remove the data.

Similar Messages

How to get Microsoft word, excel, powerpoint back on macbook after hard drive was replaced??

Lost the disc but need it back on my computer...

Hi,
You can refer to the link that Stefan provided, go to Order backup for Office on a Mac.
If this doesn't help, since we support Office for Windows in this forum, I suggest you post the question in Office for Mac forum:
http://answers.microsoft.com/en-us/mac
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support

How do I get files from multiple DVDs that are using thesame file names?

How do I get files from multiple DVDs that are using thesame file names? Message says "file already exists in catalog"
Message was edited by: marcr56

marcr56
I am viewing your question from different perspective, that is, the issue that you face when you are ripping VOBs from a second DVD-VIDEO on DVD disc using Premiere Elements,
It is best to give the Premiere Elements version and computer operating system that it is running on. In the absence of that, I will generalize.
Assuming that you are using
Premiere Elements 12
Add Media
"DVD Camera or Computer Drive"
Video Importer
Typically the Video Importer Save In: is C:\Users\Owner\Videos
Each of your DVD discs is going to have the same names for the ripped VOBs (VTS_01_1.VOB and so on depending on the duration of the movie). Consequently, after the ripping of the first DVD's VOBs and their save to Videos, you will end up with that "files already existing..." block for the ripping of the VOBs from the second DVD.
The answer is, for each DVD disc VOB ripping, to plan ahead and create and set for different folders in Videos in the Save In field of the Video Importer.
Please review and then let us know if that works for you. Please do not hesitate to ask if you need clarification on anything that I have written.
Thank you.
ATR.

How to get file from server while click on link

Hi,
i created on link and i gave one server path to select file from server but while clickinng on link it no displaying any thing.
following is the Destination url that i gave for the item.
/u08/app/appvis/xxex/inst/xxex_apps/xxrbe/logs/appl/conc/log/
please tell me how to get file from server while click on link.

Ok I got your requirement now.
If you are getting file names from view attribute then you should not be adding destination URI property for the link.
Instead you can use OADataBoundValueViewObject API.
Try below code in your controller processRequest method:
I am assuming that you are using classic table.
Also in below example it considers OAMessageStyleText and you can replace it with link item if you want.
OATableBean tableBean =
(OATableBean)webBean.findChildRecursive("<table item id>");
OAMessageStyledTextBean m= (OAMessageStyledTextBean)tableBean.findChildRecursive("<message styled text in table item id>");
OADataBoundValueViewObject tip1 = new OADataBoundValueViewObject(m, "/u08/app/appvis/xxex/inst/xxex_apps/xxrbe/logs/appl/conc/log/"+"<vo attr name which stores file name for each row>");
m.setAttributeValue(oracle.cabo.ui.UIConstants.DESTINATION_ATTR, tip1);
Regards,
Sandeep M.

Getting files from a business that uses Photoshop CS6. I use CS3 and have text problems

Hi, I'm getting files from a business that uses Photoshop CS6. I use CS3 and when I edit the text, the text moves to a different location even off screen.
Anyone know how to fix this?
It makes it hard to copy the text and imposible to change the color or make corrections.
This just started when they went to Photoshop CS6.
Thanks,
Jeffery

Ask the folks supplying you with files whether they've updated to the latest version... There were problems with Photoshop CS6 13.0.0. saving text layers in jumbled-up fashion.
-Noel

How to get file attribs - on any Mac

ok so if the Mac in question has Developer / Tools - yeah the GetFileInfo binary will work to get the Type and Creator code and other info.... since most Macs dont have this bulky download... how to get file attribute information via Terminal ? How to change it ?

Oddly enough I was just now playing around with a getinfo Applescript and studying the event log when I realized that it does return information about at least some of the attributes. I made the ones that it looks like you can get information about bold:
A Alias file
B Bundle
C Custom icon
D Desktop
E Hidden extension
I Inited
M Shared (can run multiple times)
N No INIT resources
L Locked
S System (name locked)
T Stationary
V Invisible
Z Busy
If you are interested see this thread:
http://discussions.apple.com/message.jspa?messageID=5261906#5261906
The SetFile function is actually available on any Mac that has a recent Tiger updater package installed. Thus I have copies in both the package updaters and the receipts for 10.4.7, .8, .9 and .10 in the /Library/Packages and /Library/Receipts folders. The SetFile command is in the Resources folder:
"/Library/Packages/MacOSXUpd10.4.10PPC.pkg/Contents/Resources/SetFile"
Control click on the .pkg file and select Show contents from the Contextual Menu to get there. Unfortunately I don't know of any way to use some other Terminal command to get information on all the attributes, except the GetFileInfo and using the Applescipt get info function.
Francine
Francine
Schwieder

How to get File type icon for files store on Amazons3

Hi,
i want to know about how to get file type icons for files that we store on Amazons3.i am a devloper ,i want to make gui for accessing amazons3.
so ,i want to know about how to get file type icons for files that we store on Amazons3.
thanx in advance.

hi,
have u heard amazon simple storage service,that provides storage space for
storing files, i am a devloper,i want to know the files that we store on amazon,how we can get file type icon for that files.
i want to sample code in java for this.
thanx in advance.

How to get file line count.

Hey guys,
How to get file line count very fast? I am using BufferedReader to readLine() and count. But when dealing with big file, say several GB size, this process will be very time consuming.
Is there any other methods?
Thanks in advace!

What I'd do is you create an infofetcher, register a listener, implement gotMore() and have that scan for '\n'
Some might suggest getting rid of the listener/sender pattern or use multiple threads to make ii faster. This might help a little, but only if your I/O is super-duper speedy.
you are welcome to use and modify this code, but please don't change the package or take credit for it as your own work.
InfoFetcher.java
============
package tjacobs.io;
import java.io.IOException;
import java.io.InputStream;
import java.util.ArrayList;
import java.util.Iterator;
* InfoFetcher is a generic way to read data from an input stream (file, socket, etc)
* InfoFetcher can be set up with a thread so that it reads from an input stream
* and report to registered listeners as it gets
* more information. This vastly simplifies the process of always re-writing
* the same code for reading from an input stream.
* 
* I use this all over
 public class InfoFetcher implements Runnable {
 public byte[] buf;
 public InputStream in;
 public int waitTime;
 private ArrayList mListeners;
 public int got = 0;
 protected boolean mClearBufferFlag = false;
 public InfoFetcher(InputStream in, byte[] buf, int waitTime) {
 this.buf = buf;
 this.in = in;
 this.waitTime = waitTime;
 public void addInputStreamListener(InputStreamListener fll) {
 if (mListeners == null) {
 mListeners = new ArrayList(2);
 if (!mListeners.contains(fll)) {
 mListeners.add(fll);
 public void removeInputStreamListener(InputStreamListener fll) {
 if (mListeners == null) {
 return;
 mListeners.remove(fll);
 public byte[] readCompletely() {
 run();
 return buf;
 public int got() {
 return got;
 public void run() {
 if (waitTime > 0) {
 TimeOut to = new TimeOut(waitTime);
 Thread t = new Thread(to);
 t.start();
 int b;
 try {
 while ((b = in.read()) != -1) {
 if (got + 1 > buf.length) {
 buf = IOUtils.expandBuf(buf);
 int start = got;
 buf[got++] = (byte) b;
 int available = in.available();
 //System.out.println("got = " + got + " available = " + available + " buf.length = " + buf.length);
 if (got + available > buf.length) {
 buf = IOUtils.expandBuf(buf, Math.max(got + available, buf.length * 2));
 got += in.read(buf, got, available);
 signalListeners(false, start);
 if (mClearBufferFlag) {
 mClearBufferFlag = false;
 got = 0;
 } catch (IOException iox) {
 throw new PartialReadException(got, buf.length);
 } finally {
 buf = IOUtils.trimBuf(buf, got);
 signalListeners(true);
 private void setClearBufferFlag(boolean status) {
 mClearBufferFlag = status;
 public void clearBuffer() {
 setClearBufferFlag(true);
 private void signalListeners(boolean over) {
 signalListeners (over, 0);
 private void signalListeners(boolean over, int start) {
 if (mListeners != null) {
 Iterator i = mListeners.iterator();
 InputStreamEvent ev = new InputStreamEvent(got, buf, start);
 //System.out.println("got: " + got + " buf = " + new String(buf, 0, 20));
 while (i.hasNext()) {
 InputStreamListener fll = (InputStreamListener) i.next();
 if (over) {
 fll.gotAll(ev);
 } else {
 fll.gotMore(ev);
InputStreamListener.java
====================
package tjacobs.io;
 public interface InputStreamListener {
 * the new data retrieved is in the byte array from start to totalBytesRetrieved in the buffer
 public void gotMore(InputStreamEvent ev);
 * reading has finished. The entire contents read from the stream in
 * in the buffer
 public void gotAll(InputStreamEvent ev);
InputStreamEvent
===============
package tjacobs.io;
* The InputStreamEvent fired from the InfoFetcher
* the new data retrieved is from start to totalBytesRetrieved in the buffer
public class InputStreamEvent {
 public int totalBytesRetrieved;
 public int start;
 public byte buffer[];
 public InputStreamEvent (int bytes, byte buf[]) {
 this(bytes, buf, 0);
 public InputStreamEvent (int bytes, byte buf[], int start) {
 totalBytesRetrieved = bytes;
 buffer = buf;
 this.start = start;
 public int getBytesRetrieved() {
 return totalBytesRetrieved;
 public int getStart() {
 return start;
 public byte[] getBytes() {
 return buffer;
ParialReadException
=================
package tjacobs.io;
public class PartialReadException extends RuntimeException {
 public PartialReadException(int got, int total) {
 super("Got " + got + " of " + total + " bytes");
}

I just purchase an IPhone5C to upgrade from my IPhone4, but I do not know how to get all of my photos that were on ICloud on my Photo Stream (875 photos), on to my new phone. I thought that since my 5C can see Icloud that all photos would be there...

I just purchase an IPhone5C to upgrade from my IPhone4, but I do not know how to get all of my photos that were on ICloud on my Photo Stream (875 photos), on to my new phone. I thought that since my 5C can see Icloud that all photos would be there... Can someone help me get the pics from my Iphone4 to the 5C?

Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there (subject to a 1,000 photo limit) until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device.

How to get file count in variable?

dear all,
how to get file count in variable?
regards
Naseer

Hi Nazeer ,
It wont take much time .. so simple :- )
Create one os comand step
( for unix) Use
wc -l filename.txt > someoutputfile.txt
Now the number of lines in your file will be there in the output file ( someoutputfile.txt )
Step2 :-
Now use Cezar's logic to fetch the variable value ( file count ) from the output file .. ( select value for a variable from a file )
This will not take eeven a second to finish the job.
Regards,
Rathish A M

How to get handle of a button that i created through Customisation?

How to get handle of a button that i created through Customisation?
I tried this in processformrequest ..failed :(
String str2 = paramOAPageContext.getParameter("AutoDialler");
if (str2 != null) {
System.out.println("Inside AutoDialler Hurray");
}

this works well
but can you give documentation support of whatever you are saying?
public void processRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
OASubmitButtonBean oasb= (OASubmitButtonBean)paramOAPageContext.getWebBeanFactory().createWebBean(paramOAPageContext,"BUTTON_SUBMIT");
oasb.setID("xxSubmitAutoDialler");
oasb.setUINodeName("xxSubmitAutoDialler");
oasb.setEvent("xxSubmitAutoDialler");
oasb.setText("xxSubmitAutoDialler");
paramOAWebBean.addIndexedChild(oasb);
public void processFormRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
if ( strEvent.equals("xxSubmitAutoDialler"))
//IMPORTANT Get this by calling the Function that loops for records.
System.out.println("Inside processFormRequest Hurray");
}

How to get a list of Apps that can not be recovered?

After restoring a backup (iCloud), about 5% of my 225 were not restored because they did not appear over the Apple Store. How to get a list of Apps that can not be recovered?

You should be able to download any apps that are missing at no extra cost. Just go to the App Store and download them again.

How to get a list of schemas that contain objects

Hello,
Kindly check on how to get a list of schema that contain objects.
Regards,
Tarman.

Here is the oracle version info and it run under HP-UX.
Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit Production
With the Partitioning and Real Application Clusters options
JServer Release 9.2.0.5.0 - Production
I have problem when run the query,
SQL> select owner, count(object_name) from dba_objects where owner is not in ('S
YS','SYSTEM','SYSMAN');
select owner, count(object_name) from dba_objects where owner is not in ('SYS','
SYSTEM','SYSMAN')
ERROR at line 1:
ORA-00908: missing NULL keyword
Thanks.

How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

Hi,
How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
Regards
Anil Kumar

Hello there Anil,
A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
maybe 60 days to so, watch the DB size).
To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
In your search scope you can use the following XPath to play with.
- All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
- All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
You can play with the "RequestStatus".
Hope this helps.
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]

Need to know how to get serial number to ipod that i only have receipt on

Need to know how to get serial number to ipod that i only have a receipt on

How to find the serial number of your Apple hardware product

How to get files of a dmg thats not recognized after a drive recovery

Similar Messages

Maybe you are looking for