How to get Flash Builder problems tab (warnings and errors) in english

Hi,
my Flash Builder installation is showing the warnings and errors in Finnish. I get the idea behind this and the reason is good, as I'm native speaker of the language. Nevertheless it has some drawbacks when trying to resolve the issue by googling the error because Finnish is pretty marginal language and almost every Finnish Flex developer writes his/her posts in English. So either I have to try to guess the problems correct translation in English, which can be hopeless, or try to google it in Finnish which, as said, returns about zero results.
That said, I'm wondering if it's possible to change the warnings and problems in English? Do I need to reinstall Flash Builder to accomplish this?
Best regards,
Jukka Hämäläinen

Hi, thanks for fast reply.
Unfortunately I already tried that with no success. The strange thing is, that in my Flash Builder plugin directory in eclipse.ini the language was already declared as follows:
-nl
en_US
Didn't even touch that, it was there before and still my errors and warnings were (and still stay) in Finnish (everything else in Eclipse is in English).
Any thoughts?
Cheers,
Jukka

Similar Messages

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

It means that iDVD has found a problem with one of the movies added to the project. Did you edit the movie after it had been added to the project.
Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Xcode problem, how do I get rid of doubled up warnings and error messages?

One of my cocoa projects is always showing the compiler warnings and error messages twice. It is only happening in one project which indicates to me that it must be something in this particular project configuration.
I have looked high and low for setting to control this behaviour in Xcode.
There must be a way to correct this behaviour.
I am using Xcode 3.1.4

You have to get rid of the triggers....and cleaning up the code is the only way to do that. As you've noted, it only happens in one project.

How to get rid of Segment overlap warnings and Unknown in Analyzer?

Greetings,
When I use analyzer to look at results collected with collect I get several warnings such as:
Warning: Segment <librt-2.5.so> [0x3108600000-0x3108607000] overlaps <librt-2.5.so> [0x3108600000-0x3108607000], which has been implicitly unloaded
*** Warning: Segment <librt-2.5.so> [0x3108607000-0x3108807000] overlaps <librt-2.5.so> [0x3108607000-0x3108807000], which has been implicitly unloaded
*** Warning: Segment <librt-2.5.so> [0x3108807000-0x3108808000] overlaps <librt-2.5.so> [0x3108807000-0x3108808000], which has been implicitly unloaded
*** Warning: Segment <librt-2.5.so> [0x3108808000-0x3108809000] overlaps <librt-2.5.so> [0x3108808000-0x3108809000], which has been implicitly unloaded
... (same for libc, libm and many others)
Which then causes any library functions to show up as <Unknown>.
How can I get rid of this problem?
Thanks,
Carlos

Assuming it's Linux and you are using an older version of collect, it's most likely bug 6714153: Linux: callstack frames contain "<Unknown> + ..." when application uses many libraries.
This bug has been fixed in SunStudio 12 Update 1 release. You'll have to recollect the experiment.

How to get JTable's default TAB behavior and apply it to another key ?

Is there any way to get Table's default behavior of one key say TAB & apply it to the another key say ENTER?
Means I want to disable JTable's default behavior of ENTER key & I want ENTER key should act like TAB.

Take a look at this.
[http://java.sun.com/products/jfc/tsc/special_report/kestrel/keybindings.html]

How to get last Build date of a dll in the real time target

Info On My Project
I am working on LabWindows CVI 12.0 for development . This project is a real time application for hardware, which is having Phar Lap ETS as RTOS...
I am facing some problems while checking Build date of my Application file( .dll)
I have tried to use GetFileDate API. But it is not supporting for realtime Target..
So i have tried __DATE__ macro.. That also having some problems..
How to get last Build date of a dll from the real time target ??
Please Help to solve this....
Thanks
Vaishakh A K

Please reply if any one have suggestion...

Android = How to get Flash?

OK, just picked up an Samsung Tab 2.... any suggestions on how to get flash working on the browser. I see the flash working at some store demo models.
Solved!
Go to Solution.

Hi xl,
I'm glad you got it worked out. Thanks for jumping back on the forums to let us know how you did!
Cheers,
Douglas|Social Media Specialist | Best Buy® Corporate
Private Message

How to get id of selected Tab in WebDynpro abap

HI,
    How to get id of selected Tab in WebDynpro for abap? THANKS!

Hi,
In the action method for onSelect try using,
DATA:
    lv_select_tab type string.          "Selected tab value
DATA:
    lt_events type WDR_EVENT_PARAMETER_LIST,
    ls_events type WDR_EVENT_PARAMETER.
field-symbols: <fs_value> type any.   "Attribute value in events table
lt_events = wdevent->parameters.
read table lt_events into ls_events with key name = 'TABSTRIPID'.
if sy-subrc eq 0.
    assign ls_events-value->* to <fs_value>.
    if sy-subrc eq 0.
      lv_select_tab = <fs_value>.                    "Tab selected
    endif.
endif.
Hope it helps!
Regards,
Radhika,

HT1483 Ipod froze. How to get over the problem and bring it back?

Ipod froze and not responding. How to get over this problem and bring back the Ipod ?

Go to the  menu/About This Mac - what OS version shows there?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

How to get back "Bookmark All Tabs" in menu ? Please if you don't want it (still quite some ppl want because it's usefull), at least allow to get it back trough Preferences (or at least about:config)

How to get back "Bookmark All Tabs" in menu ? Please if you don't want it (still quite some ppl want because it's usefull), at least allow to get it back trough Preferences (or at least about:config)

Some menu entries in the main menu bar are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
You can see the difference if you use Alt+F to open the File menu or other menus like the Edit menu (Alt+E) and Bookmarks menu (Alt+B) and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10.
* "Bookmark All Tabs" (Shift+Ctrl+D) no longer shows in the Bookmarks menu unless you open the Bookmarks menu via the keyboard (Alt + B).
* "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
See also:
* [[/questions/799856#answer-155765]]
* Bookmark All: https://addons.mozilla.org/firefox/addon/bookmark-all/

I have iWorks for a Mac Mini, I want to install that software on my MackBook Air, but it keeps telling me to update the software, I have updated it several times. Still no go, any ideas how to get past this problem? Thanks!

I have iWorks for a Mac Mini, I want to install that software on my MackBook Air, but it keeps telling me to update the software, I have updated it several times. Still no go, any ideas how to get past this problem? Thanks!

Movies are not bought via Netflix, then are rented or borrowed.
For iTunes account issues, contact iTunes Customer Support.

Where to get flash build 4 for Mac?

I have the serial number for flash build 4. But I don't delete my flash build installation in my Mac. Now I got problem about my flash build 4.0. And I can not find where to download the flash build 4 for mac. All are flash build 4.5.
Can I use my serial number with flash build 4.5 for Mac? or can anyone send me a link to download the flash build 4 for Mac?
Thank you for help.

PK,
Theres an eval version here of NWDS, WAS 6.40, EP6:
https://www.sdn.sap.com/sdn/downloadarea.sdn
Select 'Web AS' from the 'Available Downloads' menu and select:
'SAP NetWeaver Enterprise Portal on MaxDB, Developer Edition Sneak Preview - Web Application Server Java 6.40 with MaxDB, Developer Studio'
You might also need winrar to extract (if extension is .rar). You can download a command line version for free from here:
http://www.rarlab.com/download.htm
Cheers,
Steve

How to use Flash Builder for Eclipse Luna ( is it possible??)

How to use Flash Builder for Eclipse Luna ( is it possible??)

Yes. I have Flash Builder 4.6 and 4.7 running in different Eclipse Luna installs.
More details at http://forums.adobe.com/message/4527443
On Mac, I had to have the 32bit version of Luna for 4.6, and the 64bit version of Luna for 4.7 (and I recently started using 4.7 with Eclipse Mars).
For 4.6 you need to first download Eclipse 3.6 and install the Flash Builder 4.6 plugin to that Eclipse install. For 4.7 you need to download Eclipse 3.7 and install the plugin to that Eclipse install. Once it's installed in the 3.x version, you can then copy the fb*.link files from the Eclipse 3.x dropins folders into your Eclipse Luna's dropin folder.
There is an issue where something in Flash Builder 4.7 won't work right when using it as a plugin, not sure but it might be something with building ANEs.

How to get flash player on my ipad 3 ?

How to get Flash Player on my IPAD 3 ?

You don't. APple and Adobe don't play well together. Adobe never made a version of flash that met apple's requirements, Apple was never happy with what Adobe made so Flash is not natively supported. YOu can look for browsers that support flash, such as Puffin, Skyfire, iSwiffer and others.
There likely won't be much growth in this area since Adobe has ceased all production on mobile flash so it is in essence, dying technology....however as with anything, it'll be a long drawn out death that'll likely take years for it to totally go away.

How to install flash player with safari 7 and OSX Mavericks

flash 13 refuses to install on brand new imac with Mavericks and Safari. Any ideas on how to get Flash installed would be much appreciated

1. Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
   Download it first.
   Click Safari in the menubar and select “Quit Safari”.
    Follow the prompts and install it.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
Best.

How to get Flash Builder problems tab (warnings and errors) in english

Similar Messages

Maybe you are looking for