How to get graphs with steps greater than 10

is this the limit in numbers for graphing y vs x axis data?
I finally figured out how to make 2d line graphs for basic analysis and graphing, (such as temperature vs volume). when I go to edit my data in the chart editor, i can only make steps as much as 10. so if i have 400 degrees, that means my graph will be every 40 on one of the axis... is there a way to increase the steps so that I can have smaller intervals than 1/10th?

I just wanted to check because the workaround for Y axis requires a bit of work and patience.
I built four charts from
column A + column B ( of course you may also select the values to chart)
column A + column C (no X-axis, no labels on X-axis, lines = none, points = none )
column A + column D (no X-axis, no labels on X-axis, lines = none, points = none )
column A + column E (no X-axis, no labels on X-axis, lines = none, points = none )
Define the min and max values to get ten equal intervals in the four charts.
Define the background to none
Superpose the charts with the one built from column A & B at top.
Insert a white rectangle between the upper chart (here Graphique 1) and the three others to hide the extraneous horizontal lines (-30, -20, -10).
This way we have more steps.
Yvan KOENIG (VALLAURIS, France) dimanche 5 septembre 2010 19:44:37

Similar Messages

In Exchange 2013 i cannot open mails with attachments greater than 19.6 MB in EWS or OWA

Hello,
i have in Exchange 2013 CU3 on Windows 2012 the following problem :
When backup mails using EWS i get the message " EWS Error Code : ErrorMessageSizeExceeded." in mails with attachments greater than 20.137 KB ( 19.6 MB).
Then I checked all the settings of the EWS , but the defaults are already significantly higher than these 19.6 MB (Base64 approximately 26.5 MB)
web.config ( maxAllowedContentLength = " 85000000 ").
Settings of the MaxSendSize and ReceiveSize are 300MB .
All requestfiltering settings in IIS are set to 85MB.
When i access via EMS or OWA , file attachments over 19.6 MB can not be opened .
However, the preview shows in OWA the correct mail including attachment and it can be saved from the preview up to the set maximum size.
By double clicking on an email in OWA bigger than 19.6 MB i get the following error message:
"Error : Your request can not be completed right now Please try again later . . "
Send and receive mail can also be up to maxsize .
When accessing via Outlook , this problem does not occur.
i hope anyone here can help me
Thanks in advance

Hi,
To change the maximum message size for Outlook Web App clients, you need to change the value of
maxAllowedContentLength, maxRequestLength and both instances of
maxReceivedMessageSize by editing %ExchangeInstallPath%ClientAccess\Owa\web.config in notepad.
To change the maximum message size for Exchange Web Services clients, you need to change the value of
maxAllowedContentLength and all instances of maxReceivedMessageSize="67108864" in %ExchangeInstallPath%ClientAccess\exchweb\ews\web.config.
When you are finished, save and close the Web.config file. Also need to restart IIS by running the following command:
IISReset /noforce
For more information about Configure Client-Specific Message Size Limits on Client Access Servers, please refer to:
http://technet.microsoft.com/en-us/library/hh529949(v=exchg.150).aspx
Thanks,
Winnie Liang
TechNet Community Support

How to get rozetta with lion?

how to get rozetta with lion?
I have put all of Snow Leopard on an external drive (checked to include Rozetta)
but when I try to use it to start up my computer with Lion installed - it calls this external drive "Recover Drive" and
it asks me to select from 5 options - all of which sound ominous

gk5198 wrote:
I have never used rpm files but Zipeg says it will open them - Zipeg.com
I'm not really looking for decompressing the rpm, I'm looking for the other features like actually installing the rpm in place. There are a lot of utilities that would just "unzip" the rpm like Unarchiver, etc, but I'm looking for something that will do the rpm install...
-Thanks

Sending Emails with Attachments greater than 255 chars in 4.6C

Hi,
I have a requirement in which i have to send mails with attachments greater than 255 characters. The attachment would be a tab-delimited .TXT file. Since i am working on 4.6C, i don't have the luxury of using the FM 'SCMS_STRING_TO_FTEXT'.
It's very urgent. So any help in this regards would be greatly appreciated.
Thank you.
Balaji

Hi,
Internal table to be passed to SOLIST1 type int, table and then compress this table using fm "table_compress" with the compressed table then call fm "table_decompress" and pass this to function module SO_NEW_DOCUMENT_ATT_SEND_API1.
Keep in mind the following variable
i_packing_list-transf_bin = 'X'.
aRs

How i can fetch the template greater than 32000 k size into reach text editor

how i can fetch the template greater than 32000 k size into reach text editor

Would this help you?
- Dynamic Action Plugin - Enkitec CLOB Load

How to get data with the raw pattern from resultset ?

would you tell me how to get data with the raw pattern from resultset ?
thank you in advance!
longgger2000

I tried getBytes() and getObject()
, but I can not get the right result , for example the
data in oracle database is 01000000DFFF, when In used
the method of getBytes() and getObject(), I get the
result of [B@1c2e8a4, very different , please tell me
why !
thank you
longgger2000
[B is byte arrayseem that it return an bytes array for you.

How to get the actual value rather than pixel value in vision assistant

how to get the actual value rather than pixel value by vision assistant in my program.As shown in the figure this is my programme this is the result But i want to get this result

Check the documentation for the "ADF Dialog Framework"
It may help
Atilio

@ FM to send email with width greater than 128 chars

Hi
Is there a FM which would send an e-mail with width greater than 128 chars.
Z-Send_email_attachemnt would limit the witdth to 128 char due to table EMAIL_TEXT LIKE table BTCXPGLOG.
BTCXPGLOG- field- Message(128)
Thanks.

Hi,
look in SE38 with BCS_EXAMPLE_*
I can use 255 char.
Regards, Dieter

How to get your sound quality great in Vi

Guys,
Ive installed vista64 since i did a major upgrade along with my X-FI Gamer Fatality Soundcard, i always thought it dont sound great at all.
Ive just figured out why, in the sound options of the control panel where you can select the quality of sound always select 48hz studio quality dont go for the 96hz studio quality.
Do this in all the sound settings for each device and then tailor it to 5. or stereo which every you prefer, then goto the creative console and match it eg 5., stereo etc.
If needed test the channels and see how nice it sounds. as you will notice so long as you have a decent setup it will sound more fuller in apps and games.
I was using 96hz studio quality and always thought why it sounded so flat but as soon as i changed it to 48hz studio quality its sounding like i was using XP again, wmp sounds really good, full 5.ch and so are my games.
You can say now im totally satisfied with vista 64/32, sounds great and it plays all my games really well. Anyways i hope this helps all you out there, let us know how you get on.

RejZoR wrote:
You can get best sound with this plugin for WinAMP:
http://forums.winamp.com/showthread....readid=267586?
Thanks for that link! That plugin brings the sound back to very close to what I had with XP.

Getting job_queue_processes' must be greater than or equal to 1. Fix ...

Hi All,
I'm running the emca -config dbcontrol db command and getting the follow msg:
SEVERE: 'job_queue_processes' must be greater than or equal to 1. Fix the error(s) and run EM Configuration Assistant again in standalone mode.
I'm working on sun machine 5.10 and Oracle 10g.
Any ideo how can I fix tis problem?
Thanks in advance,
Serge

Please see the following thread;
Re: Enterprise Manager Repository reconfigue
Ogan

How to get started with SOA

Hi Experts,
I am new to SOA, can any one help me how I can get started.
Documents/ links related to SOA will be a great help.
Regards-

10 tips to get started with SOA:
1. Remember, it’s an architecture.
2. Don’t confuse SOA with web services.
3. Function-first, not product first.
4. Don’t try to make everything service-oriented.
5. Incremental SOA is a good thing.
6. Think about how near-term returns complement long-term goals.
7. Bake security into the architecture from the start.
8. Expect SOA technology to change a lot.
9. Push vendors for better investment models.
10. Find a vendor willing to be a partner.

How to get the contents of more than one comments of human task?

The human task have more than one comments. I use the following functions to get the contents but still only get the first comment. Append function only returns the first comment.
How to get all conents of comments?
<while name="While_1"
condition="bpws:getVariableData('Variable_int_i')<number(bpws:getVariableData('Variable_comment_node'))">
<sequence name="Sequence_3">
<sequence name="Sequence_3">
<assign name="Assign_7">
<copy>
<from expression="string(bpws:getVariableData('single_approve_1_globalVariable','payload','/task:task/task:userComment/task:comment'))"/>
<to variable="Variable_comment_string"/>
</copy>
</assign>
<assign name="Assign_6">
<copy>
<from expression="bpws:getVariableData('Variable_int_i')+1"/>
<to variable="Variable_int_i"/>
</copy>
</assign>
</sequence>
</sequence>
</while>

You also have to test the value:
REPORT ztest MESSAGE-ID 00.
DATA: BEGIN OF itab OCCURS 0,
        f1 TYPE i,
        f2 TYPE i,
        f3 TYPE i,
        f4 TYPE i,
      END OF itab.
DATA: sel_field(20),
      value TYPE i.
DO 5 TIMES.
itab-f1 = sy-index.
itab-f2 = sy-index + 10.
itab-f3 = sy-index + 20.
itab-f4 = sy-index + 30.
APPEND itab.
ENDDO.
LOOP AT itab.
WRITE: /001 itab-f1, itab-f2, itab-f3, itab-f4.
HIDE itab.
CLEAR itab.
ENDLOOP.
AT LINE-SELECTION.
CLEAR: sel_field,
         value.
GET CURSOR FIELD sel_field.
IF sy-subrc = 0.
    CASE sel_field.
      WHEN 'ITAB-F1'.
        value = itab-f1.
      WHEN 'ITAB-F2'.
        value = itab-f2.
      WHEN 'ITAB-F3'.
        value = itab-f3.
      WHEN 'ITAB-F4'.
        value = itab-f4.
    ENDCASE.
    MESSAGE s001 WITH 'Value of' sel_field 'is' value.
ELSE.
    MESSAGE s001 WITH 'Invalid field selected'.
ENDIF.
Rob

How to get statred with fax not efax i purchased a new hp4640

i purchased hp 4640 how do i get started with fax,and not efax?

Welcome to the forums @harleymel
Unfortunately, the Photosmart C4640 is not fax compatible. Check out the specifications below.
Printer Specifications for the HP Photosmart C4600 and C4700 All-in-One Printer Series
I hope that clarifies your question!
Have a great Tuesday,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How to set-up Payment terms greater than 10 years

We have payment terms that go beyond 10 years. In the configuration of the payment terms, the "Additional months" field (V_T052-ZMONA) only contains 2 characters. 10 years * 12 months = 120 months which is already 3 characters long.
Anybody know a way of how to set-up payment terms which is greater than 10 years? Any user exits?
Appreciate any help!
DGE
Edited by: DGE on Jan 3, 2008 5:43 AM

Hi Amlan Sarkar,
I went through IMG: Financial Accounting (New)> Accounts Receivable and Accounts Payable> Business Transactions> Outgoing Invoices/Credit Memos> Maintain Terms of Payment.
Now for me to configure Payment terms up to year 2018 (for example); i need to enter in field "Additional months" value = 120. 120 is 10 years * 12 months, since receivables for the year 2018 is 120 months from the current date.
How the "Additional months" field is only 2 characters long. Therefore I am unable to enter the value 120 which is 3 characters long.
Any ideas on how I can configure this?
Thank you.

Does anybody know how to get help with this one?

Hello there!
I wanted to get an advice on how to get in touch with the appropriate person at BT that could help with my situation.
I have tried telephone help, complaints by email and unfortunately still waiting for somebody from the customer services to help me out.
I have recently moved home. I contacted BT on 26th June to organise the line transfer to the new address. The date was set for 18th July. I also ordered line rental saver and paid for it over the phone. All went smooth, telephone and broadband was working fine at the new place, but on the 23rd July I was sent an email that "BT is sorry that I am leaving".
I thought it was a mistake, but the lady in the on-line chat said somebody stopped my service. Later she rang and left a message saying that I must have requested to move to another provider. Did not manage to speak to her again, but phoned the help line this time.
There a gentleman was trying to convince me that I called BT and cancelled my service on the 18th July and to him I was not a BT customer anymore. The truth is that I did not request to stop my service, anyway - why would I do that after paying for a year in advance. This has no logic, but because computer says so then he thinks I did it.
He also added that my account is a 'mess'. He then promised that somebody would get in touch to sort it out as my line rental was gone and my phone and internet could go off any minute.
I did not get any help. After that I wrote to them 3 email complaints to request assistance. They called and aknowledge they will help, but 3 weeks down the line nothing was done to explain the situation. Left the messages to the person from email complaints to ring me or email me -never happened.
Last week I got 2 emails welcoming me to BT and outlining the call plans that were diferent from each other and the one I agreed to on the 25th June. When I called help line 2 days ago a lady confirmed on which one I am on, but could not sort out the most annoying thing - the 'final' bill.
I was sent a bill for over 200 pounds due to premature termination of phone and broadband service , which I never ordered. They already took the money this week. My line saver is gone as well. So I am 360 pounds short. I aslo have no access to myBT to monitor my phone activity or make orders.They also did not send any confrimation of the call plan I am currently on.
It is a very annoying situation, because somebody at BT made an error and I am unable to get to anybody that could help. Everytime you call the help line you speak to somebody else and despite me thinking the email complaints would be the way forward they are not. Would appreciate some advice on how to tackle these issues: false accusations from them, inappropriate billing, problem with myBT.
Thanks Lukasz

Hi lbadek
I can help with this please send us an email using the contact the mods link in my proifle and we will investigated from there.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How to get graphs with steps greater than 10

Similar Messages

Maybe you are looking for