How to get h:datatable rows in the managed bean
Hi All,
I am showing a table with some columns in a page. I have submit button in that page.
After submission of page,I need to get the rows displayed in the page.
how can i acheive it?
is binding attribute helps?
please provide some info..
thanks in advance..
chenna........
BalusC,
thanks for ur reply..
Let me reframe my question..
here is my code snippet..
// bean
private ArrayList<MyVO> myList;
// setter and getter methods for myList......
ArrayList<MyVO> getRows(){
resultFromDB=getMyRows();// call getMyRows() DAO method for results
this.myList=resultsFromDB;
return resultFromDB;
In the jsp and displaying all the rows using<h:datatable id="someId" value="#{someBean.rows}"
so far good.
In this page i have one submit button which will call confirm() of my managed bean.
In the confirm() i need to get all the rows. i.e; i need to get the myList.
I dont want to call the getRows() method again(since it is DB hit)
But myList is empty in my confirm method.
my managed bean is in request scope.
if i change it to session it is working.but i need request scope only.
I tried with <t:saveState value="#{someBean}" /> but no luck..
Later i have taken HtmlDataTable reference with setter and getters in the bean and bind this reference in <h:datatable>.
and tried to disply the htmlDataTable rowCount...
then im getting NotSerializableException though my bean is implementing Serializable interface..
Please give some suggestion in this
thanks....
Similar Messages
-
How to get ADF UI Component value in managed bean
JDev version 11.1.1.1.3.0
I have written a managed bean method and calling that method on valueChangeEvent of a Select boolean Checkbox ADF Component.
I want to retreive the value of some other component located in the same page as the checkbox. I need the value of the component into the manged bean. I know how to get the value of the checkbox eg:
public void selectCheckBoxListener(ValueChangeEvent evt){
boolean selectedValue = (Boolean)evt.getNewValue();
String oldvalue = (String)evt.getOldValue();
How can I access the value of an input text component in the above managed bean ? Can someone help on this?Hi Sackam,
String selectedRowId = (String)(evt.getComponent().findComponent("rowId")).getAttributes().get("value");
The above coding will work fine
but wht u have specified rowId???? whether the "value" field is inside a af:table????? if so i have doubt on the above code's working.....
Regards,
Suganth.G -
How to get total of ROW in the UDF defined in header
How would we calculate the TOTAL of a COLUMN at a ROW level and get it into UDF at Header level before saving.........
Please need the Query urgently..........
Ex There are 90 items entered into GRPO and now i need to calculate the total of BED, Cess, HeCess, VAT total to be displayed in UDF ie U_BEDTot, U_CessTot, HeCessTot, VAT created at Header Level.
Need the Query....Hi sanjay,
I can help u.
Use this query
IF @transaction_type = 'A' AND @Object_type = '20'
BEGIN
UPDATE OPDN SET
U_BEDTot = (SELECT SUM(taxsum) FROM PDN4 WHERE stacode = 'BED@16' and DOCENTRY = @list_of_cols_val_tab_del),
U_CessTot = (SELECT SUM(taxsum) FROM PDN4 WHERE stacode = 'eCess' and DOCENTRY = @list_of_cols_val_tab_del),
U_HeCessTot = (SELECT SUM(taxsum) FROM PDN4 WHERE stacode = '' and DOCENTRY = @list_of_cols_val_tab_del),
U_VAT = (SELECT SUM(taxsum) FROM PDN4 WHERE stacode = 'VAT4' and DOCENTRY = @list_of_cols_val_tab_del)
WHERE DOCENTRY = @list_of_cols_val_tab_del
END
Since SAP 2005B, it refer PDN4 and ur tax split up data are stored in it.
Create UDF in the title / header.
1. BEDTot
2. CessTot
3. HeCessTot
4. VAT
Thanks Suda.
Sanjay i hope it will help ful for you.
SAGAR -
How to add A single row at the middle of the table in a Webi report
Hi,
I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
Thanks in advance
Regards
MonikaHi Monika,
It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
Can you explain in more detail what you are trying to do?
Thanks -
How to get number of rows return in SELECT query
i'm very new in java, i have a question:
- How to get number of rows return in SELECT query?
(i use SQL Server 2000 Driver for JDBC and everything are done, i only want to know problems above)
Thanks.make the result set scroll insensitve, do rs.last(), get the row num, and call rs.beforeFirst(), then you can process the result set like you currently do.
String sql = "select * from testing";
PreparedStatement ps =
con.prepareStatement(sql,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
ResultSet rs = ps.executeQuery();
rs.last();
System.out.println("Row count = " + rs.getRow());
rs.beforeFirst();~Tim
NOTE: Ugly, but does the trick. -
How to get a unique row in a value set
How to get a unique row in a value set which is used in concurrent program.
Example if a table contains 10 unique rows i need only one row to show.
Thanksadd conditions in where clause to supress the duplicate values.
On how to supress the duplicate values follow the link
http://oracleschools.com/index.php?topic=40.msg76#msg76
Thanks
Prudhvi
www.erpschools.com -
How to get count of rows for a table?
Hi,
How to get count of rows for a table and secondly, how can i have access to a particular cell in a table?
Regards,
DevashishHi Devashish,
WdContext.node<Your_node_name>().size() will give you the no: of rows.
This should be the node that is bound to the table's datasource property.
WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value); will select the row at that particular index.
You can access an attribute of a particular row as
WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value).get<attribute_name>();
Hope this helps,
Best Regards,
Nibu.
Message was edited by: Nibu Wilson -
How to edit a particular row in the table ctrl when a push button is clickd
Hi Experts,
How to edit a particular row (except the Primary keys) after selecting it in the TABLE CONTROL when a
push button is clicked in the table control.
For Eg. If you have a push button say "Modify", the particular row what we select in the table control should be in a
editable mode after clicking "Modify" Push button.
Please help me out.
Thanks in advance.Hey Ram,
Thanks a ton.
Its working fine...sorry for the late reply.
The reason behind the delay is because i had modified my code as per your logic it worked fine but the thing is that the whole column was in editable mode but not a single row.
For E.g If i want to edit a particular row, first i select the row and then click on "Modify" button. After i click on the button, the whole column gets in a editable mode including the one which i intentionally selected.
Here, the solution is that you have to set a flag in PBO so that once it is done with PBO then it need not come back again after we click on "Modify" button.
And one more query is that after you modify a particular row in the table control ( When it is in editable mode) and click on the "Save" button, it is not getting updated to database.
To update the database, we need to select the row once again after modifying it and click on the "Save" button.
Here, database is updating only when it is selected again. If it is not selected, it is not getting updated.
If you have any alternative solution, then please help me out.( I hope i am clear with the question.)
Thanks,
Ananth. -
Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?
http://support.apple.com/kb/HT1449
-
My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..
So how do I create a separate I tunes on a PC which already has itunes... Or if not can I plug my iPad to the PC and use itunes on my iPad, and drag mp3s from a computer.
I'm not sure what the equivalent of a desktop is on the iPad.. And I don't actually know how to use the icloud either...
Can anyone start me off, given it have a iPad and use of a PC - not mine with existing iplayer
I do have spotify soundcloud so I could potentially use these.. If there is a route of getting either mp3's etc to end up on my iPad or iPod.
Kind RegardsiTunes 11
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device and follow the instructions. -
DATA TRANSFER - How to get a SINGLE SPACE in the downloaded file from UNIX?
Hi Experts,
Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
So, I am keeping a single character just SPACE at the END of each record.
Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
Am doing every thing same in both cases.
So,
1 - Why its happening in case of UNIX file?
2 - How to get a SINGLE SPACE at the END in the downloaded file from UNIX?
thanqHi,
I don't know if this works:
perform SET_TRAIL_BLANKS(saplgrap) using 'X'.
perform SET_FIXLEN(saplgrap) using '0' '060'. "put length of your line from-to
... download ...
It will put space at the end of your line, according to the length.
Hope it works,
Chang -
My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?
See if this helps:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212 -
How to get default values while using the transaction "BP"
Hi Group,
I have a query on how to get default values while using the transaction <b>BP</b>?
The thing is:
when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
how can I achieve this?
So please kindly let me know the procedure to achieve this.
Thanks & Regards,
Vishnu.Hi,
The events of BDT can be used to default some fields on creating a partner.
For this create a function module for ISDAT. attach that event in BUS7.
In the ISDAT funtion modulethe following code should be used.
For example to set the nationality:
I_BUSDEFAULT-NATIO = 'DE.
CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
EXPORTING
i_busdefault = I_BUSDEFAULT
Regards, Smita. -
How to get values/data stored in the database into a list-item.
how to get values/data stored in the database into a list-item.
i tried to make a list item without any values assigned to it...but i got the below error.
FRM-30191: No list items defined for required poplist.
or
FRM-32082: Invalid value for given item type.
List EMPNO
Item: EMPNO
Block: EMP
Form: MODULE5
FRM-30085: Unable to adjust form for output.
then according to some docs, i tried the the following for the trigger
when-new-form-instance
declare
rg_name varchar2(40) := 'emp_rec';
status number;
groupid recordgroup;
it_id item;
begin
it_id := Find_Item('empno');
groupid := create_group_from_query(rg_name, 'select empno from emp');
status := populate_group(groupid);
populate_list(it_id, groupid);
end;
but yet didnt work... :(
so how the heck do i get values fetched from the database table into the list item?for list items you need to values in the record group, one is the shown value and one is the returned value.
Check out the online help for the populate_list built-in.
You'll need something like select ename,ename from emp as the record group query.
Maybe you are looking for
-
I am trying to recover a 4s which is diabled
This is driving me NUTS, I am trying to recover a 4s which is disabled and the screen has the msg. "wait 23,477,878 minutes" Is someone having a laugh? Also , when trying to recover. I get the error "can't proceed phone locked" in itunes. As I write
-
Getting errors while running cryptotools utility while creating iBOTS.
Hi Team I am getting the following error while while running the cryptotools utility from the command prompt. C:\OracleBI\web\bin>cryptotools credstore -add -infile OracleBIData_HOME/web/con fig/credentialstore.xml The file: OracleBIData_HOME/web/con
-
Updating A Cube past 10.4.3 fails
Yup, I'm trying to squeeze a bit more life out of my G4 450 Cube. I upgraded it to 10.4 as soon as it was released and it worked well for about a year. Including updates to 10.4.1 and 10.4.2 - even 10.4.3. Then I allowed Software Update to up to the
-
Thank you in advance!
-
Imported bookmark folders from old putor don't show as download options
Went from xp to windows7 new putor,exported bookmarks from FF7 to FF7 on 64bit machine, now when I bookmark a site the folders don't show giving me the option of placing future bookmarks in them.