How to get HD presets in Premiere CS3?

Hi,
I use Adobe Premiere CS3 under W7 and I would like to import, process and export movie clips in HD resolution (1920 X 1080).
The files to import are video files having a format .wmv or .mp4 with the above mentioned resolution and located on the hard disk.
When opening a new project I have the presets folders for DV-24P, DV-PAL, DV-NTSC and folder HDV which is unfortunately empty.
Looking In the Adobe Premiere Pro CS3 Program File I found a folder called Settings which contains a folder HDV with all the HD presets such as HDV 1080i30.prpreset or HDV 1080p25.prpreset.
How can I "move" these presets into the empty presets folder HDV in the program in order to access them?
Many thanks in advance for any help you can provide.
N.B. So far I can import the 1929 x 1080 clips , but then they are processed and exported as 720 x 576 files hence loosing the original HD resolution.

Do you have a USB hard drive handy?
If yes, you need to make a full boot drive backup to that USB hard drive before changing anything
Hardware crashes or virus infections or simple software problems happen, so you should buy AND USE software to make a full backup of your hard drive to an external USB hard drive... plus, making step-by-step backups during a new install or major program addition makes it easy to go back a step if something doesn't work
This backup and then restore is, of course, only to the same computer with a new drive (or the same drive as long as you don't mind writing over everything) since doing a restore to a new computer won't work due to Windows and many programs having activation information that is keyed to your hardware (which is why Windows will force you to RE-Activate if you change very much hardware)
The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
Image runs off of a bootable CD via Linux (the Zip you download includes a program to make the bootable CD) and it reads EVERYTHING on the drive, even the hidden registration information, so everything is restored when needed... and you may restore the image to a brand new drive in case of a crash, and not have to re-install anything
Please note that I own no part of Image, and I don't get a referral fee (that is just a plain web link) but I use the program and it has saved me a LOT of trouble when I had a hard drive die... and I was able to restore everything and not have to re-install or re-activate a single program, from Windows on up

Similar Messages

How to get audio into Adobe Premiere Elements 12?

How to get audio into Adobe Premiere Elements 12?
I have filmed an air show with a very good camera JVC pro
And when I pick up the clips in Adobe Premiere Elements 12, it works too, but only without sound.
I think I tried everything for 4 days now.
Sound in my computer works perfectly
I go to where the video files are located and try to run them in VLC or in Nero Kwik so it works fine with both audio and video.
I have checked the sound card.
Yes, I have tried everything so now I'm so tired of this lousy so I'm ready to throw this program at the dump.
It's not normal if you will keep on producing audio for over 4 days at Adobe
The old Elements 9 worked fine. Offer some of would consider developing it again. I do not know how I should do.
My name is Thore Hult
live in Karlshamn in Sweden

Thore Hult
On what computer operating system is your Premiere Elements 12 working on? Have you updated it from 12 to 12.1 Update using an opened project's Help Menu/Update. If not, please do so.
For your immediate problem.
What is the model/settings for the JVC camera that recorded you video. I want to get at the properties of your source video including the file extension.
Since you are getting video, but no audio, please download and install the free codec utility named GSpot to see what is shows
for your Audio Name and Status.
http://www.headbands.com/gspot/
The other properties of the file there would also be of interest.
When you import your source file into the project, do you see any "conforming" activity going in a progress bar at the bottom right corner of the workspace?
If so, do you wait for it to complete before you move forward in the project?
Can you get sound in any of your Premiere Elements projects with this current JVC file or other?
Can we assume that your troubleshooting has included checking
a. Volume control within the project
b. Edit Menu/Preferences/Audio Hardware ASIO
Let us start here and then we can decide what next if necessary.
Thanks.
ATR

How to get the Page Number in CS3 with VB?

Hi, Everybody
I use the Visual Basic to read the words and their page number where the Words are at. I want to do it according to Story. Some TextFrame of the Story waw placed in other pages: How can I get the Page number according to the Word that is selected?
For myStoryCounter = 1 to Document.Stories.Count
Set myStory = Document.Stories.Item(myStoryCounter)
For myWordCounter = 1 to myStory.Words.Count
Set myWord = myStory.Words.Item(myWordCounter)
myWordContents = myWord.Contents
Rem ** How to Get the Page Number according to the Word ***
Next
Next

> But I don't understand why Item(1) are set.
because Word can have more than one parent TextFrame - when split across TextFrames
only Character have one ParentTextFrame accessed also by ParentTextFrames.Item(1)
> why Story.TextFrames.Count alway is 0, Is it bug?
no - it's not bug
in older IDs - Story.TextFrames collection refer to all TextFrames as containers for Story text
but in CS3 - collection Story.TextFrames contain all TextFrames inserted as InLine/Anchored objects - same like Story.Rectangles or Story.Ovals
in CS3 - when you want to refer to TextFrames as containers for Story text - you need to use Story.TextContainers - because now you can link TextFrame and Text-On-Path as Story - Text-On-Path isn't TextFrame
robin
www.adobescripts.com

How to get image filename in indesign cs3

Hi,
I want to get a filename of a selected rectangle frame graphic child item like tiff image or pdf file. Please help me with a code snippet.
Thanks,
K.Saravanan.

app.activeWindow.activeSpread = myDocument.spreads[j];
app.activeWindow.zoom(ZoomOptions.FIT_SPREAD);

Yahoo toolbar is all that is displayed, how to get back presets.

We have lost the top toolbar with the back button, refresh, stop, home screen logo and url address. How do we reset the menu bars to original settings?

Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar & Navigation bar, so they have a check-mark.

How to get default presets to the left panel

I finally installed lightroom 3 after many, many months of it sitting on my desk. I have been watching tutorials, and playing around with it, and I have found that the default presets are only on the right side panel in library. On the left panel in develop the heading presets shows up but when I click on the triangle nothing shows up under them. I did see a question already on here to right click on the heading and check it which I did a few times just to see if it would work and nothing. This is very frustrating because I have to click on each preset and undo it if I don't like it. Please help.

Hello!
When I left clicked in the spot shown below,
This field is shown (shown below). As you can see the preset menu is checked, thus the presets being shown.
Is this what you are referring to? when you left click nothing is shown, and nothing is listed under presets?
janelle

Premiere CS3: How can you encode xml cue point data in the chapter section of a marker for FlashVid?

Hi there,
I'm a total newb to this forum, so hello adobe premiere community! I'm perplexed by Adobes documentation on Premiere (and I'm sure I'm not the first ) anyway on the live documents page below:
http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WS9390BED7-9466-46ea-A0E A-3240F1AFC36C.html
it states that:
“The cue point data in the Chapter field of a sequence marker in Adobe Premiere Pro will be encoded as Flash XML. For the XML protocol required, see Flash Help.”
Which is great…except this information doesn’t exist seemingly in either the Premiere documentation or Flash either for that matter, but as I’m interested in working with the chapter/marker area in Premiere – should I really be told to go off and search the documentation for another application, probably not! What would have been useful would have been a code snippet saying you do it like this, but of course, that would make things too easy!
Basically, I understand that in After FX you can add Flash marker information specifically for interpretation when exporting to Flash Video (i.e. name, type and parameters etc) and it suggests that you can do the same above in Premiere CS3 using some kind of concatenated string in the chapter area…it just doesn’t tell you how anywhere seemingly – WHY ADOBE!
Currently when I export markers as cue points based on the advice in the page above, anything I put in the chapter section to force Premiere to create a cue point is converted to a string, which becomes the cue point ‘name’.
This cue point name is then automatically appended to the ‘time’ the marker was inserted at and is always encoded as type ‘navigation’, with no obvious means of adding ‘parameters’ into the equation.
So (finally) does anyone know if you can insert this information into the chapter area for correct interpretation by flash (i.e. thus allowing you to choose between either 'navigation' or 'event' types, and pass as many 'parameters' as you wish etc) or are you just limited to supplying a name, and it being automatically set to the navigation type with no parameters?
I’m sorry for this long essay but at least the issue is well defined for you to answer, honestly any help you can provide what so ever would really be most appreciated!
Best regards,
Kat
PS – I have utterly no knowledge of XML either just in case you were wondering – and my only interest in XML is getting this basic information encoded into the FLV file from Premiere Pro CS3! Please help, pretty please with daisy’s!!!

Hi dradeke,
Thanks for your reply, which is indeed useful as clearly Adobe have made this task easier and less obscure in CS4 by adding simple interface functionality, however I'm stuck with using CS3 for the moment. Its not majorly a problem as the video material in question can be exported uncompressed then setup with cue points using the Flash encoder as an alternative (i.e. or even After FX CS3 also) which both provide the same features as Premiere CS4 seemingly. It is just that it would be much easier to be able to drop in simple markers whilst working with Premiere CS3, as this is what we are going to be using primarily, I just wondered if anyone knew how to invoke this in CS3 - its possible you can't, the documentation is vague at best!
However I really appreciate your response and help, thanks

RE: How To Get More Effects, And Presets

Hello Everyone.
How can I get more Effects, And Presets for Premiere Pro CC.
Is It free, or we have to purchase them ?
Thanks.

Search for them . Google "Premiere plugins"
Some are free and some are for purchase.
You cant buy presets. Maybe you can swap them with someone but I dont know how.

How to get accurate photo printouts using calibrated FlexScan S1932 , Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

How to get accurate photo printouts using FlexScan S1932 screen, Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

You need to work with the calibration parameters to get a good match from screen to print. There are no fixed values - basically whatever settings produce a match are the right ones.
First, set the white point - luminance and color - so that screen white is a visual equivalent to paper white. You can be very specific about this, with a viewing booth right next to the display and a particular paper as target. Or you can take a more generalistic approach. That too will usually work well, as long as you keep the aim in sight: screen white = paper white.
Don't trust the white point presets. You will usually have to adjust to compensate for your working environment. Make sure you can adjust both along the blue/yellow Kelvin scale and the green/magenta axis. Any given Kelvin value may well be wrong on the green/magenta axis.
Next set a realistic black point. This is important. Monitor manufacturers throw about completely unrealistic contrast ranges that you will never see on paper. A good glossy inkjet paper will be in the vicinity of 250-300:1, or a black point around 0.4 - 0.5 cd/m² if your white point is at 120. If you have a monitor that goes down to, say, 0.2, which most monitors today will, you're in for an unpleasant surprise.
Leave gamma at 2.2. Gamma is remapped from profile to profile and is "invisible" - the net result is always linear. You just want to stay close to native so that the monitor behaves at its best.
If you have a wide gamut monitor soft proofing in Photoshop can be useful. With a standard gamut monitor it's mostly a waste of time since monitor gamut is the limiting one.
Oh, and let Photoshop manage color. Make sure you have the right paper/ink profile and also make sure you have the right paper selected in the printer driver. This controls the total amount of ink.

How do I change the folder that Photoshop gets my presets from?

First and foremost, I'm using Photoshop CS6, and I'm running Windows 7. I have a boatload of presets (brushes, styles, custom shapes, et cetera). I'm currently running Photoshop from a second, internal hard drive which has more space. Currently, Photoshop gets my presets from C:/Users/[nameredacted]/AppData/Roaming/Adobe/Adobe Photoshop CS6/Presets. But all of the presets I've acquired are in E:/Program Files/Adobe/Adobe Photoshop CS6/Presets. I need Photoshop to point there.
How do I do that? Thank you in advance!

RubyfruitPixie wrote:
…my primary hard drive is only 80 GB, that's why I'm running Photoshop from my secondary hard drive which has 500 GB, and 200+ GB of space left). I need Photoshop to point to the folder on my secondary hard drive where I have space…
Get a bigger hard drive. They're laughably cheap these days.
Whatever you do, don't point Photoshop to a secondary or additional plug-ins/presets folder. Ever since CS6 was released that can totally cripple Photoshop; just do a forum search.

[CS3][JS] How to get the file type of current document

Hi,
How to get the file type of current opening document (e.g., tif, jpeg, png) using JavaScript with Photoshop CS3.
I am using file object the open the files one by one in the folder (the files sometimes don't have the extensions).
If the current document is in tiff format then I need to convert to 8-bit, if its an Jpg image then needs to ignore the file.
Regards,
Karthik

Do you really need to know the file type? What about just checking the bit depth?
var doc = activeDocument;
if (doc.bitsPerChannel != BitsPerChannelType.EIGHT) {//Not 8 bit
doc.bitsPerChannel = BitsPerChannelType.EIGHT;
//do your save etc
}else{
//Ignore

How to get 64 bit version for premiere elements 12

How to get 64-bit version for Premier Elements 12 ?
I download from ADMISY site.
Click on win 64 bit and download it.
When I try to install ther is a error this download version is not for 64 bit I have try many times but same result

Hello
I have been away some days
ADMISY is a software partners for Adobe
I running Win 7 Home Edition
I have received a card with a code when I bought the program and the I
download from ADMISY
Sending serial and installation warning
PhotoshopElements_12_WWEFDJ.7z
PhotoshopElements_12_WWEFDJ
PremiereElements_12_WWEFDJ_win32.7z
PremiereElements_12_WWEFDJ_win32
I can not find a 64 bit version of 32-bit or 64-bit version of downloads
This is information I have
Best regards
Erling Magnusson
2015-02-04 22:33 GMT+01:00 Adobe Forums <[email protected]>:
How to get 64 bit version for premiere elements 12 created by A.T.
Romano <https://forums.adobe.com/people/A.T.+Romano> in *Premiere
Elements* - View the full discussion
<https://forums.adobe.com/message/7162950#7162950>

How do i edit a V21O file in premiere cs3?

hello. i really need some help! been searching on the net but to no avail.
I have been sent a couple of dvds from a company with V210 files on them. they are pretty big vido files, around 6gb
i need to edit the files in premiere cs3.
i have tried opening them up into premiere but it just play the audio, the video is just a white screen
i have also tried converting the file to avi with file conversion software but no luck, opening it up in Aftereffect also, but still just the white video
i really don't know what to do, i have a deadline for tomorrow. can anyone help please???
thankyou thankyou!!

Welcome to the forums.
The following links will help you:
FAQ: How do I import xyz format files?
FAQ:How do I convert my files?
Cheers
Eddie

After having to reinstall my drive with applications I get a message with Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". How do I do this? I am using a mid-2010 iMac 27" with 10.7.3

After having to re-install my start-up drive recently I am getting a message with Adobe Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". I am using a mid-2010 iMac 27" with OSX 10.7.3. How do I do this?

Premiere is an Adobe application and is supported in their forums.
Good luck.
x

[CS3 Win]: How to get active spread and layer ?

How to get the active spread and layer in an Indesign CS3 document?

I found the answer (I wanted active spread and page): active Spread: InterfacePtr<ILayoutControlData> layoutControlData(gContext->GetContextView(), UseDefaultIID()); UIDRef uidRefSpread = layoutControlData->GetSpreadRef(); active page: UID uidMyPage = layoutControlData->GetPage(); UIDRef uidRefPage(fCHMLDocRef.GetDataBase(), uidMyPage);

How to get HD presets in Premiere CS3?

Similar Messages

Maybe you are looking for