How to get higher clock speeds with OC Genie?

I am 100% new to overclocking and I just built my new pc...
Bios version 1.5
Intel I7 860 Cooled with Corsair H50 Push-Pull
MSI P55 GD65 non USB3
2x2gb Corsair XMS3 DDR3 1600(Running at 1333 for some reason)
Zotac Geforce 9800GTX+ 512mb
Antec Trupower Trio 550w
2x WD Caviar Blue 160gb in Raid0
When I hit the OC Genie button it gives me 3.54GHz. Is there anyway to get to 4.0GHz with my setup.
Have not changed any settings myself all was done with the OC Genie button
My temps are around 42' with fans on lowest settings

Quote from: Bernhard on 01-May-11, 15:25:22
OK, so you are able to set your CPU voltage manually. You need to consider that the auto voltages will compensate only up to a certain OC level, after which the user usually has to do manual adjustments. This auto compensation differs for each hardware combination. As HU16E suggested, try low VDroop and see if it helps. The other alternative is a BIOS flash, or manual voltage settings.
I tried low vdroop but it didn´t make any difference. But it´s ok, i can set the vcore manually but i was just investigating if i could get the best of both worlds with the powersavings auto vcore offers during idle

Similar Messages

How to get slow playback speed with video

Hi. Newbie to the forums. hope you can help.
Can I put a control in flash that allows users to alter the
playback speed of a video clip? I am making a tutorial (with sound)
and I want the students to be able to run the video in slow motion
and then gradually increase the speed as they become more
confident.
Any ideas?
Regards
Matthew

Thanks. I checked out the web site, and although it only refers to FCP, I assume "Film Effects" is compatible with FCE HD v3 as well.
I appreciate the info.
Gary

I bought iMac 3.1 AND Macbook Pro 2.2 on 2.6.12 only to be cheated by Apple by releasing the 2.3ghz on 15.6.12. with higher clock speed up to 3.3ghz turbo boost

I bought iMac 27" 3.1ghz AND Macbook Pro 15" 2.2ghz on 2.6.12 only to be cheated by Apple by releasing the 2.3ghz on 15.6.12. Only 2weeks after my purchase! The new 2.3with higher clock speed up to 3.3ghz turbo boost&nvidia graphic card. This is not fair to me as a customer bcoz I paid HUGE $$$. How to solve? I want a replacement unit. Please help.

Welcome to the Support Communities. Next time, consider consulting this guide before buying:
http://buyersguide.macrumors.com

Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

How to get gui_download and gui_upload with popup filename?

how to get gui_download and gui_upload with popup filename?

Here is a short example.
report zrich_0003 .
data: ifiletab type filetable.
data: xfiletab like line of ifiletab.
data: xstring type string.
data: rc type i.
data: itab type table of string.
data: xtab type string.
start-of-selection.
call method cl_gui_frontend_services=>file_open_dialog
    changing
      file_table              = ifiletab
      rc                      = rc.
read table ifiletab into xfiletab index 1.
xstring = xfiletab-filename.
check not xstring is initial.
call method cl_gui_frontend_services=>gui_upload
    exporting
      filename                = xstring
changing
    data_tab                = itab.
loop at itab into xtab.
    write:/ xtab.
endloop.
Regards,
Rich Heilman

How to get the contents associated with a component.

How to get the contents associated with a component.
Like i have 2 buttons and i want to get the contents associated with these button without clicking them i.e without firing the event.
By Contents i mean, whatever things we get after firing the event,we get some other window and some thing is added to the current page and so on.

grab all the code inside the actionPerformed(ActionEvent e) method

How to get a minus sign with the cost field in ALV.

Hi ,
How to get a minus sign with the cost field in ALV.
The Ouput will be displayed like Rs -1500 instead of 1500-
I can't use concatenate also as i may have to use the sum functionality of ALV .
Cheers
Sunny

Hi sunny,
1. The OTHER FIELD
has to be character field of say length 15.
2. Write the original numeric value to
this character field (in a loop)
3. But simply writing won't help.
4. use this kind of logic.
5.
REPORT abc.
DATA : m TYPE i.
DATA : chr(15) TYPE c.
m = -100.
WRITE m TO chr.
IF m < 0.
SHIFT chr RIGHT BY 1 PLACES.
CONDENSE chr.
CONCATENATE '-' chr INTO chr.
ENDIF.
WRITE chr.
regards,
amit m.

Best books to get up to speed with LabView 7?

I am presently looking for advice as to the best book(s) to get up to
speed with LabView 7 (Best beginner's book, best intermediate book,
best advanced book). Any books to advoid? While I prefer hardcopy, I
would be open to the best online resources as well.
Art

I would suggest if you have the opportunity to take the basics 1 and 2 classes offered by NI and select integrators. Otherwise there are books by Bishop and Johnson that will give you a great start with LV. If you need any info on classes please let me know. hope this helps.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor

How to get vlan tag programe with mac book air

how to get vlan tag programe with mac book air,i'm using the usb ethernet adapter

For prompt help contact TATA.
For more on this: https://discussions.apple.com/thread/3680625?tstart=270

How to get an error icon with tool tip in a displaying table in a particu

How to get an error icon with tool tip in a displaying table in a particular field..
Thanks.

Hi,
In the context create an attribute of type string .
Create the attribute in the node which you bind for table.
In the layout .
1.create a Table UI element.
2 create binding for UI element.
3Right click on the Table UI and select insert table column.
4.once the table column is inserted right click on table column and select insert cell editor.
5.create the cell editor of the type image.
6.Bind the source property of the image to the attribute in the node which you have created.
so depending on what image(type of icon) needs to be displayed set the attibute accordingly.
refer to the link for image :
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/d1/af8841349e1909e10000000a155106/frameset.htm]
Priya

How to get 802.11n speed for Apple TV?

I installed my first Apple TV yesterday. Great stuff!
My iTunes movie library is on a Core 2 Duo MacBook Pro. I have not yet used the AirPort Extreme 802.11n Enabler on this MacBook, since I just found out it exists. If I use it, can I utilize 802.11n sync speeds with the Apple TV? How?
My AirPort network uses only an "old" 802.11g AirPort Extreme base station, not the "new" AirPort Extreme base station with 802.11n.
I have three 802.11g AirPort Express base stations on my network, mainly for using AirTunes.
My iMac connects to my wireless network using 802.11g, and I don't think the 802.11n Enabler works with it.
My cable modem current connects to my Airport Extreme (802.11g) base station via Ethernet.
I understand I can get a new AirPort Extreme 802.11n base station to replace the 802.11g one, and that would let me use the higher 802.11n speed from the MacBook to the Apple TV. It would also allow (unless I misunderstand) all my 802.11g devices to access the network at the lower speeds they are capable of. Correct?
I also understand there is something called a "dual band network" that involves using both base station types in one large network, but I don't know what the advantage of doing that would be, compared with just replacing the old base station. Can someone fill me in on that?
And, is there any way to get 802.11n speeds from the MacBook Pro to the Apple TV without getting an 802.11n base station?
Thanks in advance.

If I use it, can I utilize 802.11n sync speeds with the Apple TV? How?
And, is there any way to get 802.11n speeds from the MacBook Pro to the Apple TV without getting an 802.11n base station?
No. Unless you set up an adhoc network between your Mac and the Apple TV.
I understand I can get a new AirPort Extreme 802.11n base > station to replace the 802.11g one, and that would let me > use the higher 802.11n speed from the MacBook to the Apple > TV.
Yes, it would.
It would also allow (unless I misunderstand) all my 802.11g devices to access the network at the lower speeds they are capable of. Correct?
If you set things up this way, then I believe you wont be able to use wideband mode on the AEBSn. Your AEBSn will be opperating in mixed mode and its 802.11n performance will be degraded. The best set up would be to keep your old router to service the G only devices, and have your new AEBSn service the N capable devices. This would allow you to take full advantage of the performance increase provided by 802.11n capable devices.
Message was edited by: ctomer

CPU Clock speed with Belle Update

The original symbian^3 devices run on the ARM 11 Processor which has been optimized to function close to 1GHz. But they're currently running at a speed of 680 MHz. My request to Nokia is that please optimize our processor speed to atleast 1GHz with the upcoming belle update. If you haven't planned on doing it, please do it with a minor update atleast after you release belle. I'm not an expert on this. So suggestion and comments are welcome.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

bumblebirra wrote:
I would be surprised if the rest of the hardware in the phone, like the RAM etc, couldn't support the maximum CPU clock speed. When such sophisticated electronic devices are designed it's impossible to know until it's all been put together how it will actually perform as a complete unit - the hardware, software, battery capacity, etc. The clock speed allows a fine-tuning once everything comes together, to get the optimal balance.
Well-made software makes a huge difference to how much CPU/hardware resources are required. Software efficiency is the most important factor of all.
A GPU is only there to perform tasks that would otherwise take up huge amounts of CPU resources. Dedicated graphical tasks such as 2D scrolling, 3D texture-mapping/filling for example. But that's all. The CPU is still running the whole show, but just has much of the load taken off it by the GPU.
So with the GPU doing more and more, the CPU and it's speed become less relevant.
A few things here, some of what you have mentioned I agree with. But some I dont. Firstly when any device is designed, things like the GPU and RAM are all allowed for, that is the speed at which each is capable. There is no use taking pot luck saying oh we think that will be enough. Its all calculated right from the word go.
Its done for several reasons, firstly costings, there is no use producing something that is so expensive no will be able to afford it. secondly to make sure you dont end up with bottle necks in data flow. Also it no use producing something that is so slow that you cant do anything worthwhile on it. That is some of the reasons.
You are absolutely right about software, well made software installed in a relatively slow running device can quite often beat poorly designed software running on a fast machine at exactly the same task. O/S like windows for instance, in my opinion only, whilst full of features, is definitely bloated, and not well designed. A standard install disc for windows these days is around the 3Gig mark (depending on version of OS), where as something that does exactly the same thing like Linux still fits on a 700M cd.
And you are right about the GPU, its does relieve the pressure on the cpu. Unfortunately the gpu in an N8 or an E7 is only running at 200Mhz. Considering most things are graphical based on these phones. I would have to wonder how much of the gpu is being used, especially when the one chip is running everything from the 2d/3d graphics/rendering, the camera up to 12MP, HDMI, HD video recording and play back, a stack of video codecs etc.
Unfortunately the main cpu from everything i was able to find is simply listed as an ARM11, these processors run on several Nokia's phone, including the older E90 (which had dual cpu's but ran at much slower speed of about 332 Mhz., however the Arm site list the ARM 11 as several versions, including one that actually has 4 cpu on the one the chip but only presents itself as 1 cpu to the rest of the hardware, with this cpu running anywhere up to 1Ghz. So its entirely possible that the 680Mhz listed for the N8/E7 could be as fast as it goes. Also the current versionof the ARM11 have a power consumption of 0.21mW/Mhz. so based on that figure a processor running at 680Mhz would consume 142.8 mW, but at 1G it would be 210mW, that a difference of 67.2mW. That would mean your phone would go flat a lot quicker. This info is based solely on information that I can find on Nokia run sites, ARM's site and broadcoms site. That way we can beleive what we are able to read with some certainty. I did find other non-related site suggesting 720mhz for the cpu, but they are only a 3rd party mobile news site, that said it had been suggested that it was capable of 720Mhz..
But i do firmly believe with efficient code the phones can perform extremely well, Anna certainly seems faster than the old Symbian ^3 version that was on the phone prior to Anna, whether or not Belle can be made any more efficient remains to be seen. But heres hoping.

Low clock speed with amd 3400+

hi all,
i have an amd 3400+ 64bit and i have downloaded multiple hardware information programs which state that my CPU clock should be between 2.8ghz - 3 ghz with this type of processor, however i only have 2.1 ghz.I have searched the bios and have notice many features are unavilable, i basically cannot change anythings except boot devices and other things that are not usefull to me, my bios does not give the option to change clock speed, or voltage, or bus speed. my current FBS is 201 mhz and my motherboard is MSI k8T800 7010 with phoenix awardbios 6.00pg version 1.14 03/02/04 can any one help me please i would like to get my processor to the correct speed of 3 ghz.

ah right, so it also says the maximum clock speed is 3000 mhz , so with overclocking can my processor achieve this? i have 1 mb of l2 cache.
EDIT what do i do with the bios though because i have a really slow fan that i need to speed up but as i said hardly anything can be done from my bios?!

[AMD] Highest clock speed with K8N Neo Plat + A64 3200+ Newcastle?

Who owns the exact setup (ram+cpu+mobo) as me and what is the clock speed you all achieved? Mine can only go till 220x11, Ram at 220mhz,
(2.4ghz, DDR440)?

The place I bought my parts from were selling similar ready-built systems with K8N and Geil Value Ram (not Golden) so I thought it would have been fine also (same Antec case and PSU)...
300W and 10A is pretty low for a PSU (mine's only 350W and 16A though) - but your problem sounds very much like my original problem (although worse).
Take a look at Ram that does not work well with MSI K8N:
Quote
angusmcchris: Kingston Value RAM doesn't work so hot. Would have saved me a weekend's worth of horror if I had found this thread earlier. I had to lower the RAM speed down to 166MHz to get it to work, and now its time to go to bed.
Quote
eLeCTR0n: I have a Kingston DDR 400 MHz 512MB card (not the HyperX). I couldnt do anything first when i had it installed in slot 1 running at Max Mem Clock of 200. I couldnt install any OS. i got the blue screen million times and many different ones. Even linux failed to install until i slowed it down to 166 in the BIOS then everything worked fine. Then i wanted to see if i had a defective motherboard or ram card so i bought a PNY DDR 400 512MB ram stik pulged in at 200 and it worked perfectly.
Also look at Ram that works well with MSI K8N for good, compatible RAM...
I can't recommend Crucial Ballistix enough: 2-2-2-8 timings @ 1T on AUTO settings. Never had a single glitch with hours and hours of Doom3, Half Life2, etc...

How to get instance of Class with its type parameters

Hi,
Have any of you folks been dealing with generics long enough to show me how this should be written? Or point me to the answer (I have searched as well as I could).
I boiled down my situation to the included sample code, which is long only because of the inserted comments. And while boiling I accidentally came across a surprise solution (a bug?), but would obviously prefer a smoother solution.
My Questions (referred to in the code comments):
#1. Is there a way to get my parameterized type (classarg) without resorting to using the bogus (proto) object?
#2. Can anyone understand why the "C" and "D" attempts are different? (All I did was use an intermediate variable????) Is this a bug?
Thanks so much for any input.
/Mel
class GenericWeird
   /* a generic class -- just an example */
   static class CompoundObject<T1,T2>
      CompoundObject(T1 primaryObject, T2 secondaryObject)
   /* another generic class -- its main point is that its constr requires its type class */
   static class TypedThing<ValueType>
      TypedThing(Class<ValueType> valuetypeclass)
   // here I just try to create a couple of TypedThings
   public static void main(String[] args)
      // take it for granted that I need to instantiate these two objects:
      TypedThing<String>                        stringTypedThing = null;
      TypedThing<CompoundObject<String,String>> stringstringTypedThing = null;
      // To instantiate stringTypedThing is easy...
      stringTypedThing = new TypedThing<String>(String.class);
      // ...but to instantiate stringstringTypedThing is more difficult to call the constructor
      Class<CompoundObject<String,String>> classarg = null;
      // classarg has got to be declared to this type
      //    otherwise there will rightfully be compiler error about the constructor call below
      // This method body illustrates my questions
      classarg = exploringHowToGetTheArg();
      // the constructor call
      stringstringTypedThing = new TypedThing<CompoundObject<String,String>>(classarg);
   } // end main method
   // try compiling this method with only one of A,B,C,D sections uncommented at a time
   private static Class<CompoundObject<String,String>> exploringHowToGetTheArg()
      Class<CompoundObject<String,String>> classarg = null;
      /* Exhibit A: */
////     classarg = CompoundObject.class;
         results in compiler error "incompatible types"
         found   : java.lang.Class<GenericWeird.CompoundObject>
         required: java.lang.Class<GenericWeird.CompoundObject<java.lang.String,java.lang.String>>
               classarg = CompoundObject.class;
                                        ^
         I understand this. But how to get the type information?
      /* It's obnoxious, but it looks like I will have to construct a temporary
          prototype instance of type
             CompoundObject<String,String>
          in order to get an instance of
             Class<CompoundObject<String,String>>
          (see my Question #1) */
      CompoundObject<String,String> proto = new CompoundObject<String,String>("foo", "fum");
      /* Exhibit B: */
////     classarg = proto.getClass();
         results in compiler error: "incompatible types"
         found   : java.lang.Class<capture of ? extends GenericWeird.CompoundObject>
         required: java.lang.Class<GenericWeird.CompoundObject<java.lang.String,java.lang.String>>
               classarg = proto.getClass();
                                        ^
      /* Exhibit C: */
////     classarg = proto.getClass().asSubclass(proto.getClass());
         results in compiler error: "incompatible types"
         found   : java.lang.Class<capture of ? extends capture of ? extends GenericWeird.CompoundObject>
         required: java.lang.Class<GenericWeird.CompoundObject<java.lang.String,java.lang.String>>
               classarg = proto.getClass().asSubclass(proto.getClass());
                                                     ^
      /* Exhibit D: (notice the similarity to C!): */
////     Class tmp1 = proto.getClass();
////     classarg = tmp1.asSubclass(tmp1);
      /* It compiles (see my Question #2) */
      return classarg;
   } // end method exploringHowToGetTheArg()
} // end class GenericWeird

Thanks so much, Bruce. (Oh my goodness, how would I have ever come up with that on my own?)
So in summary
This doesn't compile:
      classarg = (Class<CompoundObject<String,String>>)CompoundObject.class;but these do compile:
      classarg = (Class<CompoundObject<String,String>>)(Class)CompoundObject.class;or
      Class coclass = (Class)CompoundObject.class;
      classarg = (Class<CompoundObject<String,String>>)coclass;And this doesn't compile:
       classarg = proto.getClass().asSubclass(proto.getClass());but this does:
       Class tmp1 = proto.getClass();
       classarg = tmp1.asSubclass(tmp1);

How to get higher clock speeds with OC Genie?

Similar Messages

Maybe you are looking for