[How-to] Get HP Officejet Pro 8100 to work

The HP Officejet 8100 Pro was immediately recognized in CUPS, I didn't even had to add it manually in there.
However, it required the following work:
1) To make it work in LAN without DHCP, I wanted to set its IP to match my network.
By default it uses 169.254.68.142, so I had to configure one LAN interface of my Arch PC to match that network, then you can simply access its control interface via webbrowser to its IP, and change its IP there. I set it to static 192.168..something.
2) When I want to print in duplex mode, I first had to go to "hardware options" in CUPS and set "Duplex" (the only option offered in there, which makes sense) to enabled.
However...! When printing, for example in LibreOffice, after selecting the correct paper type (A4 Duplex), I have to set duplex option to "ignore". Only if this is done it WILL actually print in duplex-mode. Otherwise it'll print single pages.. exactly the wrong way round. (More about the bug here https://bugs.launchpad.net/linuxmint/+bug/1088281 )
3) Usually you want to choose hpcups for driver, not hpijs, or you won't have some printing options available. From what I read, hpcups is basically just better than hpijs, no drawbacks.
HOWEVER, I tested the hpijs driver and noticed that it offers so called "fastdraft" printout option, which is NOT available in hpcups (it only offers "normal" draft). A page printed in Fastdraft mode seems to use less toner, so I added an hpijs version of the printer for now, for when I want to save toner.. silly drivers, geez.
4) In Wine the printer is immediately available, but printing will only print the first page, then the job is "completed" .. So I have to print to "Virtual PDF printer" (which will by default save to /var/spool/... if not changed in /etc/cups/cups-pdf.conf) and print the resulting pdf file with evince or something.
Waking up from its sleep mode is instant, and printing also starts instantly.
The only remaining (minor) problem is this https://bbs.archlinux.org/viewtopic.php … 7#p1295747
Last edited by Jindur (2013-07-09 16:12:24)

WonderWoofy wrote:This is not really fora material.  If you are going to go through the trouble of documenting the steps necessary to get this printer working, you should put it in the wiki where it belongs.
Please consider that.  It would make a good addition.

Similar Messages

  • How can I get my HP Officejet Pro 8100 to work. I had HP  on the phone for over two hours and thought it was fixed. Now it just will not print at all.

    How can I get my HP Officejet Pro 8100 to work.
    I'm using an  iMac (21.5-inch, Late 2013) running Yosemite. I spent hours on the phone with HP who did their best and thought they had solved the problem Now it has stopped printing completely. Just says 'idle' or' connecting to printer' but never does.

    Greetings paulr.paulr,
    Welcome to the Apple Support Communities!
    I understand that you are unable to print from your Mac running Yosemite on your HP Officejet Pro 8100. I know that printer issues can be very frustrating, but I believe the information in the attached article will be able to assist you. I would suggest reading over and systematically working your way through the suggested troubleshooting steps located in the following article. If any issues arise as you work your way through the steps, or if you work your way completely to the end and reset the printing system and the issue continues, please let me know. 
    OS X Yosemite: Printing troubleshooting
    Cheers,
    Joe

  • Using windows 7, how do I get my Officejet Pro K8600 to print to 13x19 paper?

    I purchased a laptop with Windows 7. Now I cannot get my Officejet Pro K8600 to print correctly to 13x19 paper. It prints onto 13x19 paper but everything is 8.5 x 11 in size. I click print, click properties, change the paper to Super B 13x19, hit ok, the box shows the 13x19 paper with the images filling the paper, I click ok for it to print and it prints the image 8.5 x 11 in size on the 13x19 paper instead of filling the 13x19 paper. I did not have this trouble (and still don't) with my old laptop with XP. Is it the operating system or is it a wrong setting in properties? I have tried to compare the properties settings in both computers, but I cannot find any differences. I don't think it's the driver....please help!
    This question was solved.
    View Solution.

    Hello HW,
    Try this: go to Devices and Printers and right-click on the Officejet Pro K8600 and click on Printer Properties. Go to the tab called Advanced and click on the button called Print Processor. Select Winprint and click OK. Try another printout and see if it works now. If you still see the same issue see if there's a scaling option on the print dialogue in the application you're printing from.

  • Hp officejet Pro 8100 Printer Tray

    I have an HP Officejet Pro 8100 printer. I removed the paper tray this morning to load paper and now I can't get it to slide back in all the way. It stops about 4 inches short of closing.  I feel like an idiot! How can I have problems sliding a drawer in?  Are there any clips etc. that I should have in place, etc. that might have come off?
    This question was solved.
    View Solution.

    Hi,
    You might try lifting the front of the printer to see if anything is obstructing from your desk.  It should slide right back in.
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • HP officejet Pro 8100 will print from an Iphone but not from my windows laptop

    HP officejet Pro 8100 will print from an Iphone but not from my windows laptop. I get an error stating "unable to communicate with printer"

    Hi Melatina66,
    Welcome to the HP Support forums.  I understand that when trying to print from your laptop that you get a communication error message.
    To better assist you, would you please provide some further information:
    1)       How is the printer connected (USB cable, ethernet or wireless)?
    2)      When you installed the printer on your laptop did you set it up with a USB cable?  If  yes, did you switch the connection type on the laptop from USB cable to ethernet/wireless?
    3)      What version of Windows operating system are you running on the laptop (Windows XP, Windows Vista, Windows 7, or Windows 8, etc)?
    4)      When printing from your iPhone are you using Apple's AirPrint or HP's ePrint app?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Can I print in black and white with an empty color cartridge on a HP Officejet Pro 8100 printer ?

    Only the cyan cartridge is empty, all of the other 3 cartridges are fine. I ordered the cyan cartridge online but I need to print important documents today. The power button is blinking when I try to print.
    I don't understand, black and white should not use a color cartridge to print.
    Is there a trick so I can print before receiving the cyan cartridge ?
    This question was solved.
    View Solution.

    The Officejet Pro 8100 ePrinter has the same print mechanism as its All-in-One counterpart the Officejet Pro 8600.  This printer has a printhead mechanism that contains 4 individual cartridges: CMYK (cyan/magenta/yellow/black).  
    One will have to replace the cartridge, if the unit provides a message of one of the colors being empty, before the unit will resume printing.  It is a maintenance mechanism to prevent the product from self-damage.  Hope this helps.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • More than one HP OfficeJet Pro 8100 printer

    Hi,
    I need to buy two wireless printers to use with an iPad.
    But the thing is: if I install TWO identical HP OfficeJet Pro 8100 under the same wifi network, how can I know which one I'll print? In other words, my concern is that when I'll want to print a document using the iPad it will show two printers, but both with the name "HP OfficeJet Pro 8100". Having in mind that each printer is located far from each other in my house, I need to print under the right printer.
    Is it possible to change the name that appear on AirPrint so I can distinguish both Printers? Something like "Printer-Studio" and "Printer-Bedroom"? Or something that works somehow...
    Thanks.
    This question was solved.
    View Solution.

    Pedrosacelso,
    No problem.
    Have a good weekend!

  • Problems with officejet pro 8100 and Lion?

    I just bought a new HP Officejet Pro 8100 Wireless and I have not been able to get it to work correctly.  It's hooked up and all the software seems to work but it prints very, very slowly.  It takes about 2 minutes to print a color page.  Is there some known problem with OJPRO8100s and Macs with OS X Lion on them?  I downloaded v12.14.0 of the printer package from HP, uninstalled what came with the printer, and installed the latest and greatest.  Didn't make a bit of difference.

    Officejet Pro 8500a extremely slow printing with Lion Mac OSX 10.7
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-8500 a-extremely-slow-printing-with-Lion-Mac-OSX-10/td-p/1030521

  • Can't HP Officejet pro 8100 do wifi access point?

    Yesterday my HP Officejet pro 8100 arrived and I try to connect via wifi. I thinked that It need a infrastructure access point to print via wifi.
    When I powered on the printer I osserved that It create an access point autonomously with SSID: HP-Setup-7A-Officejet Pro, with IPv4 address server, etc...
    I was very happy and I printed a page with my smartphone samsung s4 connected directly with printer access point (not wifi direct but standard wifi).
    Today no changed occurred but I can't use printer with its own access point, but only with an external wifi access point.
    Someone can help me, please? It could be an hardware problem?
    Thanks,
    Luca
    P.S. in web server I checked that "access point connectivity" (Punto di accesso wireless connettività in Italian) is checked.
    This question was solved.
    View Solution.

    Hello lucait
    To print via WiFi you need to have a wireless router setup. Once you have the wireless router setup correctly you will have a SSID and Wepkey that will enable you to add devices to your network. The network will allow all your devices to communicate not just with each other but with the internet. At the moment your printer was not put in a network so instead of broadcasting on a network it is broadcasting on it's own network called HP-Setup-7A-Officejet Pro which is only good for a short period of time to allow you to setup your wireless. I am going to assume you have a wireless network and you are just needing assistance getting the printer setup on that network.
    To set your printer up on a network you will need to reset your network defaults so your printer begins to broadcast that HP-Setup-7A-Officejet Pro network again. You can do this buy following the steps on the HP Support document Resetting the Network Settings. Once you have done this you can begin to install the software that came with your printer on your computer. You want to set the printer up wirelessly when the option arrives. The software should configure your printers wireless for you and put it on the network. Once completed you should be able to access your printer from all your devices as long as they are on the network. 
    I hope this helps resolve your wireless issue. Thank you for posting on the HP Forums. Have a great day! 
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • My HP Officejet Pro 8100 printer refuses to print in color

    My HP Officejet Pro 8100 printer refuses to print in color, I have a macbook OSX 10.7. for some reason it will not print in color and I do not know what to do. please help.

    Ctopkis, Make sure you have updated your firmware. Here is the link to the lastest firmware that was posted on 02-18-2012. 
    Firmware upgrade is for HP Officejet Pro 8100 ePrinter - N811a
    Post back and let me know if this fixes the issue or not.
    -Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Mac OSX 10.9 and HP Officejet Pro 8100 Compatibility

    Can we please get a driver for the HP Officejet Pro 8100 that is compatible with the Mac OSX 10.9? I bought the printer so that my roommate and I could share it to print wirelessly, but I am unable to do that without a compatible driver. Please develop one as soon as possible!
    Thanks!

    Hi,
    The Drivers are available via Apple Software Update,
    In order to configure it wirelessly you may use the HP Easy Wireless Install app.
    You may find a step by step guide in the following document:
    h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=4337543&spf_p.tpst...
    The app iself can be downloaded from the Mac App Store:
    https://itunes.apple.com/us/app/hp-easy-wireless-setup/id876495880?mt=12
    If you experience any issues while trying to locate the pritner during the wireless configuration. restoring the network defaults for the printer can be done by pressing and holding both the Cancel ( ), the Wireless ( ), and the Power ( ) buttons for three seconds.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Officejet Pro 8100 - Washed out blacks in images / Dark blacks in text prints???

    Here is my system: iMac Maverics OS, HP Officejet Pro 8100, Photoshop, Pages & Genuine inks.
    I print a text page (Black and various colours) from Pages/Text Edit or any other text program and the colours are deeply saturated, blacks are black and I'm totally happy.
    I print the exact same text, recreated in Photoshop, everything is washed out. Blacks are greyish, colours are pastel & it looks like it's been printed at 50% opacity.
    I saved my Photoshop text mock up as a .Jpg .TIF .BMP and tried printing them in Pages & Mac Preview - same washed out results as when I print direct from inside Photoshop.
    All my software is genuine, drivers are up to date. It's like HP use one process to print text and a whole other process to print images, **bleep** is going on???
    Please advise on how to fix, if anyone else is having or has had similar issues.....

    Hello @pA8100 , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you're experiencing Photoshop colour issues.  I would like to help.
    It is possible you need to adjust the colour settings in Photoshop from RGB to CKMY.
    I would recommend utilizing this article on How to Convert RGB to CMYK in Photoshop.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP Officejet Pro 8100 - AirPrint - wireless

    My HP Officejet Pro 8100 had been working just fine with AirPrint, but then I changed my wireless router and I've forgotten how the printer was configured originally.
    I only use the 8100 with my apple iPhone 4S, it's not connected to any computer and I'm sure it was never connected to any computer when I originally installed it.
    Question is : how do I set it all up again from scratch? There's no 'set up' screen on the printer, so how is it done?
    I 'know' the printer has to 'connect' to my wireless router but how is it done without a computer connected ?
    My router is a BT Homehub4, and it works fine with my iPhone and ipad.
    Thanks in advance for advice - I have searched for info, but everything seems to point to a need to have a computer physically connected but I'm sure this wasn't the case originally - just switch on and AirPlay worked!
    Maybe I need to 'somehow' uninstall airplay on my iPhone?
    HELP!
    This question was solved.
    View Solution.

    Well, I'm going round in circles now....
    I press the WPS button on the BT Homehub 4 and a red colour icon on the front of the hub comes on and flashes for a few minutes.
    Meanwhile on the printer the blue wifi icon just flashes on and off.
    By pressing two buttons on the printer I've printed out a "HP Network Configuration page " which says WPS PIN (and a series of numbers) 'good for 5 minutes, blah blah blah'.
    Further down the sheet it does show the router listed with info - channel, privacy RSN WPA-PSK, encrypt AES/TKIP, signal -62, WPS Yes.
    But still no AirPrint print - and wireless status says 'disconnected', communication mode 'infrastructure', Network name (SSID) hpsetup.
    Blimey, this ain't easy is it!
    What next????
    Steve.

  • Duplexer no longer an option in print screen - hp officejet pro 8100

    I have a HP Officejet Pro 8100 that came with a duplexer. Up until today, the duplexer has worked. I don't technically know that it's not working. But when I open up the print screen in open office, adobe, or any other program, it no longer gives me the option to print double sided. I have no idea what to do and there are no tutorials that explain how to correct this. Any help is appreciated.
    Found out after trying to reinstall the printer software that because my OS updated to 8.1 from Windows 7, my printer is no longer compatible with my computer. Is that ridiculous or what? I messaged HP, though I have no warranty so I'm sure they'll deny any product support. That's okay, if need be I'll take my business elsewhere. I shouldn't have to pay for support on a product that they made obsolete on purpose. Businesses used to be all about a quality product. Oh how the times have changed. This is one expensive paper weight.
    This question was solved.
    View Solution.

    You're amazing! You're a genius! Where HP fell short in their customer service (via email), you really helped me out. All systems working now. Thank you! 

  • Officejet Pro 8100 problem with wireless setup on iMac OS 10.10.4

    I have recently changed my router and now need to reconfigure the wireless settings on my Officejet Pro 8100.  I have installed the latest firmware from HP.  Apple updates says that I have the latest driver for the printer.  The disk that came with the printer does not work with the iMac 10.10.4.  How do I update the printer to work with the new router?  

    Thank you "PrintDoc" for your interest.

Maybe you are looking for