How to get iBook to Automatically turning the page

It used to do this on The software before but now I just can't get it to do it on iOS 7  please can anybody help thanks in advance

That depends on what you mean by "automatically turning the page". The only available settings for page turning behavior is in Settings > iBook > Both Margins Advance.

Similar Messages

  • How do I turn the page on ibook with voice over on

    I can't get the iBook to voice over the page and how do I turn the page when Voice Over is on?  I can only get the voice over to read one line at a time - how do i get it to read the page continiously?

    Hi..
    Swipe the page from right ro left to turn pages.
    And try a two finger swipe from top to bottom to read an entire page.
    http://www.youtube.com/watch?v=T-dQI6S6_Hw

  • How do i fix my nano (6th gen) from automatical turning the volume down by itself

    how do i fix my nano (6th gen) from automatical turning the volume down by itself? I bought my first nano (6th gen) and it started to happen. so, i just bought a new one because i'm unavailable to take it to an apple store. now, the second one is doing the same thing.  i've reset them through itunes, and it continues to happen. any suggestions?

    Did you check your volume limit settings?
    copied from page 24 of the iPod_nano_6thgen_User_Guide

  • How do I get numbers to automatically add the next date down a column in numbers?

    How do I get numbers to automatically add the next date down a column in numbers?

    Hi Dd,
    If you want the next date automaitcally  filled in when you add a row to the bottom of the table, you can use a formula.
    Here's an example, done in Numbers 2.3 (Numbers '09). The method is basically the same in Numbers 3.
    Formulas in row 3:
    B3: =B2+1
    C3: =C2+7
    D3: =D2+14
    These have been filled down to the last row of the table.
    The same table is shown below after three rows have been added by dragging the Row control handle (below the tab for row 7) down. No changes other than adding thse three rows were made by the user.
    Note that rows 1 and 2 are header rows, and that row 2 contains the starting date for the seraies of date in each column. In the formula, the number at the end tells Numbers how many days to add to the previous date to get the next date.
    Autofill of the formula requires that every non-header cell located above the cell into which the formula is to be filled contains the same formula.
    Regards,
    Barry

  • Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

    Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..

    My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..
    So how do I create a separate I tunes on a PC which already has itunes... Or if not can I plug my iPad to the PC and use itunes on my iPad, and drag mp3s from a computer.
    I'm not sure what the equivalent of a desktop is on the iPad.. And I don't actually know how to use the icloud either...
    Can anyone start me off, given it have a iPad and use of a PC - not mine with existing iplayer
    I do have spotify soundcloud so I could potentially use these.. If there is a route of getting either mp3's etc to end up on my iPad or iPod.
    Kind Regards

    iTunes 11
    If you  have iTunes 11 turn on the Sidebar.  Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
    To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device and follow the instructions.

  • How to get rid of automatically created server accounts in iCal and Mail?

    I have recently setup an OS X 10.6.2 Server for our small office. I got the domain name wrong in the initial install and fixed this by doing a complete clean reinstall of OS X 10.6 server (then upgrade to 10.6.2).
    The problem is that one of the OS X 10.6.2 clients had been setup to talk to the server prior to the rebuild. Now on this client, I cannot work out how to get rid of or change the automatically created server accounts in iCal and Mail - everytime you login, these are recreated using the old domain name (and of course don't work).
    In Mail if you remove the server account (from Accounts in Preferences), it just pops back again. I even removed every trace of the old domain name from the apple.com.mail.plist file but when I re-open Mail that darned server account (with the old domain name) just pops up again.
    In iCal its slightly different in that you can remove the account and it stays away while you have iCal open. But as soon as you close and re-open it, that server account just pops up again!
    I thought it might be something to do with Kerberos and found a Kerberos file on the client which had the old domain name throughout it - I changed all these references to the new domain name, but still the same behaviour in Mail and iCal.
    This is doing my head in. Any ideas?
    Message was edited by: davidav

    I suggest you ask in the snow leopard server forum
    http://discussions.apple.com/category.jspa?categoryID=264

  • How to get rid of automatically created Mail and iCal accounts on client?

    I have recently setup an OS X 10.6 Server for our small office. I got the domain name wrong in the initial install and fixed this by doing a complete clean reinstall of OS X 10.6 server (now upgraded to 10.6.4).
    The problem is that one of the OS X 10.6.4 clients had been setup to talk to the server prior to the rebuild. Now on this client, I cannot work out how to get rid of or change the automatically created server accounts in iCal and Mail - everytime you login, these are recreated using the old domain name (and of course don't work).
    In Mail if you remove the server account (from Accounts in Preferences), it just pops back again. I even removed every trace of the old domain name from the apple.com.mail.plist file but when I re-open Mail that darned server account (with the old domain name) just pops up again.
    In iCal its slightly different in that you can remove the account and it stays away while you have iCal open. But as soon as you close and re-open it, that server account just pops up again!
    I thought it might be something to do with Kerberos and found a Kerberos file on the client which had the old domain name throughout it - I changed all these references to the new domain name, but still the same behaviour in Mail and iCal.
    This is doing my head in. Any ideas?

    I have the same problem. Every time that I open iCal on the client a new account is created and an error message shown that I cannot login. I can delete the wrong account in the iCal preferences. However, as soon as I restart, the account and the error message are back.
    How do I "unbind" and "rebind" a client? I searched the "Mac OS X Server
    Open Directory Administration Version 10.6 Snow Leopard" but the only reference to "binding" seems to be in the context of Active Directory which I don't have.
    Any help is greatly appreciated.

  • I'm french, my white Ipod4g 16gb has been stolen 2 days ago, I would like to know how to get it back thanks to the serial number! please

    I'm french, my white Ipod4g 16gb has been stolen 2 days ago, I would like to know how to get it back thanks to the serial number! please

    You can't.
    Change your iTunes (Apple ID) password along with any other password that was stored in the iPod.  If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number).  If any passwords are associated with a bank or any other savings institution, contact them also and discuss approprate action with them.
    The only real protection you have is with the personal information on the device rather than the physical device itself.  This requires action before the device is lost/stolen.  If the device has significant personal information, it should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

  • How to get a check box on the selection screen

    Hi all
    can any body tell me how to get a check box on the selection screen

    parameter: pa_check   as checkbox.
    To define the input field of a parameter as a checkbox, you use the following syntax:
    PARAMETERS <p> ...... AS CHECKBOX ......
    Parameter <p> is created with type C and length 1. In this case, you may not use the additions TYPE and LIKE. Valid values for <p> are ' ' and 'X'. These values are assigned to the parameter when the user clicks the checkbox on the selection screen.
    If you use the TYPE addition to refer to a data type in the ABAP Dictionary of type CHAR and length 1 for which 'X' and ' ' are defined as valid values in the domain, the parameter automatically appears as a checkbox on the selection screen.
    REPORT DEMO.
    PARAMETERS: A AS CHECKBOX,
    B AS CHECKBOX DEFAULT 'X'.

  • The bottom bar on my mail has disappeared which means I can't create, reply or forward to an email. Any ideas how to get it back? Touching the screen at the bottom doesn't work!

    The bottom bar in my email seems to have disappeared which means I can't create, reply or forward any emails. Any auggestions to how to get it back? Touching the bottom of the screen doesn't work. Thanks.

    Close all apps in the Multitasking Drawer; Double Tap Home Button to open drawer, Swipe up on each app to close it. Repeat until all apps are closed, touch home screen.
    Restart phone, hold both Home and Power/Sleep buttons down at the same time, continue to hold them down until the Apple Logo appears, Release both buttons and wait for phone to restart.
    Check email app to see if bottom bar and new email icon have come back.
    If not, delete the email account in settings and then add it back in again.
    If mail still not working as it should, you may try doing a Reset All Settings reset in Settings => General => Reset => Reset All Settings.  You won't lose any data, music, apps, videos,pictures, etc.  But you will have to go back in and turn on or off any settings you changed on your phone because everything will be set back to factory defaults.

  • How to get deleted photos back in the trash can?

    I tried to dele all the photos I've deleted from iPhoto by cmd+delete all the photos in the iPhoto trash can, but that only made all the photos reappear in iPhoto.
    How do I get the deleted photos back in the trash can?
    I discovered this the next time I turned on my mac, so I couldn't just "go back".
    I really don't wanna go trough ALL of my pictures and delete the thousands of pictures I've deleted over the past three years..
    I now know how to delete dem properly, but not how to get them all back in the trash can. Please help me!
    Ida

    There's no way to do that. If you try and trash thousands of photos at one go you'll trash the Library - which is what sounds like you've done.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

  • How to get Manager id automatically when Employee Id is given.

    How to get Manager id automatically when Employee Id is given.
    1) I created a simple BO with two elements namely
        1.Employee Id
        2.Manager id
    How to get employee's first name and last name?
    And how will i get manager id  automatic when i click employee id in element field.
    Anbu.

    Have you tried to use "APPS.FND_CONCURRENT" API?
    http://etrm.oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=FND_CONCURRENT&c_owner=APPS&c_type=PACKAGE
    http://etrm.oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=FND_CONCURRENT&c_owner=APPS&c_type=PACKAGE%20BODY
    Thanks,
    Hussein

  • My Ipad has hung up on a book that I downloaded and was reading. I cannot turn the page or exit the book.  I can get to my ipad desktop but still cannot close the book.

    My iPad has hung up on a book that I downloaded and was reading. 
    I icannot turn the page or exit the book. I can still ge to my ipad desktop but
    still canno close out the book.

    Quit iBooks and restart the iPad and then try the book again.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

    I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

    http://support.apple.com/kb/HT1449

Maybe you are looking for