How to get illustrator to print like photoshop

Currently running on CC, printing to HP z6800. Majority of the company uses ai files. however, when printing from illustrator, it will not match the colors, and becomes super saturated. however, if I import it to photoshop, it is true to color. Please help! I have matched color profiles and ideally it should all be the same when it comes out.
Dinh Tran
OSX 10.9.5
2x2.4ghz Quad Core Intel
32gb ram
Adobe CC (2014)

We are using a PS drive that is built in with the printer, and letting the printer determine the colors.
Color settings are perceptual on both ai and ps since if we go relative color metric,and letting ai determine the colors, it gets even more neon.

Similar Messages

How to get windows username printed on each page irrespective of application? we have cm6030f.

How to get windows username printed on each page irrespective of application? we have HP CM6030F.

Hi,
Normally, you will receive a Windows Azure Pass from your local Windows Azure team. Please try to contact your local Windows Azure contact (http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Also, you could see this page
http://www.windowsazurepass.com/AzureU/AcademicFAQ and apply the free trial azure via (http://www.windowsazurepass.com/AzureU/).
Q: I am a student. Can I apply for a pass?
A: Windows Azure Educator Grants are only for valid faculty. If your faculty has been awarded a Windows Azure Educator Grant, you will be able to get a pass through him/her for you coursework. If you are interested in learning more about Windows Azure,
we encourage you to share these Educator Grants with your faculty or sign up for the FREE 3-month trial offer.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get the form printed through the transaction ME42

hi,
How to get the form printed through the transaction ME42.
For example :
In t.code vf03 . In the main menu there is an option billing document , when we click on that we get a drop down menu which shows issue output to. If a print program call has the code to get the value from the t.code , immdiately when we click issue output to it call the form.

Here go to ME42 put in your RFC no, in the menu Header -- Messages, go there and see if a message has been inserted, else you can insert one.
when you save this, it will call the form.
Regards,
Ravi

How to get Illustrator to accept my serial number?

How to get Illustrator cs2 to accept my registered serial numbers

John,
Since the activation server was closed down, you are supposed to uninstall, hide your discs away, and then download and install the non activation version(s) that correspond(s) to your current one (single application or suite possibly supplemented by single applications), and use the generic replacement serial number(s) provided on the download page that you get to when you click 2. Download and install CS2 applications on the web page that Monika linked to, choosing your original/preferred language.
Your original serial number is key to your legitimate use of the downloaded non activation version(s).
The only suite available for download is CS2 Standard, so if you have have CS2 Premium, you will have to download Golive CS2/8 and Acrobat 7 separately as additional individual applications.

My sister has the latest iphone 4 update and so do I. She has this feature that is like a shortcut on her screen at all times and I was wondering how I get it? Its like a square thats faded with a white circle around it?

My sister has the latest iphone 4 update and so do I. She has this feature that is like a shortcut on her screen at all times and I was wondering how I get it? Its like a square thats faded with a white circle around it?

Whereabouts on her screen at all times? What does it do?

How to get consistent colour prints from different Macs?

Hello Forum,
we are unable to get consistent colour prints from the various Macs in our office. There is only one printer, and for the sake of this discussion only one PDF file to be printed. The Macs have various OSes, from 10.4.11 up to 10.9.5; most are Minis of one vintage or another.
The printed results *should* IMHO be identical no matter which computer issues the "print" command, but they are far from that. Some computers print with a reddish tint, others with too little saturation or too much brightness (to put it in Photoshop terms).
What exactly must we do to get identical results no matter which computer does the printing?
Thanks in advance
John
p.s. May I just say what a ridiculous pain in the neck it is to have to choose from that list of purchasable Apple products aka communities? Some questions, like this one, do not belong in a single community or at least there is no community whose title describes our problem. I am uneasy filing it under "Mac Mini" because there is absolutely no reason to believe that the problem is a misbehaviour of *one* of our Minis. In the old days, when help was geared to users rather than to pushing the sale of further Apple products, there used to be forums with titles like "Printing problems".

Thanks for the suggest, which didn't solve the problem — because it wasn't a Mac problem at all. Acrobat Reader was getting the colours wrong! Setting "Print as image" in the Print dialog extensions solved it.
Resolved, case closed.

Need info on how to get the little pictures like Adobe website has next to the title of the page??

I know how to enter title text but i need to know how to get an image next to the title of the page please help??

http://alt-web.com/favicons.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

[SOLVED]How to get a kicker panel like this?

I want my Arch/Chakra KDE to have a transparent kicker panel like http://pclinuxos.com/wp-content/uploads … minime.png I tried various permutation and combinations of existing themes i.e Air, Air Netbooks, Oxygen. Tried few themes like Glaze etc but none of them work. I don't want a complete transparent panel like in Bare Naked Theme(which does not work/come in KDE 4.4.2 BTW) but like shown in the above image with slight white hue but not more. Perfect as in the image. Does anyone know how to get it?
Last edited by chakra-user (2010-04-23 06:14:28)

toxygen wrote:
look for the naked plasma theme, or the bare naked theme (this is for kde 4.x). you can do it through settings ->aapearance -> style -> workspace and change the theme there (or get new theme and search for naked).
or you can go to http://kde-look.org and search there for plasma theme
Like I mentioned above, * Naked theme is not available for 4.4.2 becoz I could not download it via the built in kde theme manager maybe it is in compatible. Is there a way to remove those ugly round shapes from AIR theme. modify .svg of air how?

How to get existing (Dlink) printer servers working with Snow Leopard

I have a new macbook. We have two existing Dlink 1260 print servers serving 3 Windows machines. Both connect to our network via CAT5, we have a Buffalo router and cable modem service. One print server has a HP inkjet ands the other has a Canon inkjet printer. I know the IP addresses (static) and TCP ports of the two print servers. Apple's support people told me they arent trained to help me on print servers.
How does one install these print servers in Snow Leopard 10.6?? I am out of ideas other than Geek Squad :>(

I would imagine you need to connect via IP, LPD, put the IP address of the server in for Address and the Port Name in for the Queue.
You will need Postscript drivers for the printers, based on info on the D-Link site.

How to get transparancy in shapes in photoshop

How to get transparancy in shapes in photoshop

You need to explain better and provide a lot more info. What "shapes"?
Mylenium

How to get copies of print jobs to print one at a time?

You are welcome. It's the little things that destroy! Have a great day!

I have a user who prints off a 3 page document a lot. He also selects to have 3 copies made. At the moment it prints like this: 1 1 1, 2 2 2 and 3 3 3. He wants it to print: 1 2 3, 1 2 3 and 1 2 3. What setting would allow him to print all 3 pages of his job and then do it two more times in a row?
Thanks!
This topic first appeared in the Spiceworks Community

How to get colors to print correctly

I've been creating some ads for print. I noticed that the solid colors in the ads (ie. boxes, vector logos...) are a lot different in print than they appear on screen. (For example, a "teal" comes out as a blue, and a "taupe" comes out as a green) I realize the difference has to do with the screen colors being RGB and print is CMYK. I design the ads in CMYK mode.
So, what is the best way in Illustrator to get the printed color as close to the screen color as possible? Should I be using spot colors?
I suppose the same question can be asked about designing logos in Illy. How do you select the appropriate colors so that they print as close to as they appear on screen?
Thank you,
Ron

>There are two issues that have not been addressed. The quality of the monitor affects how colors are displayed. If you have a poor LCD, and slouch when you're using it, the viewing angles might throw off your color sense.
Nobody reads post #5.
>If you're doing big print runs, you might want a color test page shown to you before you print out a million copies.
Hector, what you call a "color test page" is known as a
contract proof here, and it's something on which you should
absolutely insist, whether the print run is large or small. Once you sign off on the proof, it becomes the printer's responsibility to get the colors right. This is S.O.P.
With unlimited budgets, an unlimited number of custom (e.g., Pantone) colors are possible. But even that road has bumps. Use too many colors and, aside from the expense, you're looking at multiple passes through the press with attendant potential registration problems. Plus, if your document contains photographic images, colors can come out wacky no matter how many Pantones you specify.
CMYK is a real-world solution for those with cost constraints. It behooves the designer, therefore, to invest in a decent monitor and calibrator and take the time to understand modern profile-based color management.
>The printer might be using a diffrent color profile
Of course, they'll be using a different color profile
if they know what they're doing. The standard SWOP profile you might use for your document, for example, is a
generic profile. The printing company should be making a conversion to a custom profile that represents their output device, namely their particular printing press with the paper and inks in use.
The entire point of your embedding a profile is to enable the output service provider to apply an appropriate device profile at press time without having to guess what the CMYK "numbers" (values) mean in your particular document.
If they
don't use a "different" profile, you're in trouble.

How to Get Your Inkjet Printer Working with Windows 8 Consumer Preview

The drivers for your HP Inkjet Printer are already included in the new Windows 8 Consumer Preview!
You do not need to download drivers to use the product. Keep reading to learn how to install the print driver included in Windows 8 Consumer Preview with your HP printer.
Getting started in Windows 8 Consumer Preview
HP designed a quick and easy tool that helps you find the best driver for your printer in Windows 8 Consumer Preview: the HP Printer Install Wizard.
Download Printer Install Wizard for Windows 8 Consumer Preview
NOTE:The HP Printer Install Wizard is not available for all printer. This tool is available only for Windows 8 Consumer Preview. The HP Printer Install Wizard works with products connected with a USB cable or with a wired (Ethernet) or wireless network connection. If you would like to connect your product wirelessly, but it is not yet on a wireless network, you need to temporarily connect the product with a USB cable to run the wizard.
Step one: Download the HP Printer Install Wizard
1.   Click the following link to download the Printer Install Wizard:
HP Diagnostic Utilites
2.   When the tool finishes installing, click Finish. The wizard opens automatically.
Step two: Run the HP Printer Install Wizard
1.   Press the Power button to turn on the printer, if it is not already on.
2.   Connect the USB cable to the HP printer and to the computer, if it is not already connected.
3.   Make sure that your computer has an internet connection. The wizard must access the internet to work correctly.
4.   Click Next to begin the utility. The wizard displays a list of detected printers.
5.   If the wizard detects more than one printer, select your HP printer from the list.
6.   The wizard automatically displays the best available driver for your HP printer.
If a full feature driver is available, the wizard detects it. Click Next to download and install the software. For full functionality, HP recommends installing the full feature driver if it is available.
If an included print driver is available, the wizard explains that the driver is already installed. It will also supply a link to more information about using an included driver.
JonW
I work for HP

This is GREAT! My printer has print drivers available.
If I have helped you solve your issue please mark it as solved .....
(I am an HP employee)

How to prepare Illustrator logo art with Photoshop elements

I have designed a logo that will be used in a wide variety of print and web applications. It is made up of primarily vector art...outlined type and an icon. But I am using a photo as the background fill inside the icon shape.
What is the best way to construct the final art files so that I get optimum resolution of the leaf image for the largest applications (window signage) and efficient file sizes for the smaller applications (business card)? I want to provide the client with vector art (not jpegs or tiffs) and still have the photo be the appropriate resolution for a wide range of finished sizes for print and web.

twob,
It is quite common to create a number of different files for different purposes.
Apart from different colour mode for print (CMYK/spot) and web/other screen uses (RGB), obviously print requires higher resolution, and web/other screen uses require raster files.
The resolution needed for web/other screen uses should be evident in each case.
The resolution needed for different print tasks depends on a number of things, including kind of printing.
In this connexion it is important to realize that the required resolution in print depends on size and viewing distance: if you view artwork that is twice the size at twice the distance, you will need half the resolution, in other words the same file size in pixels by pixels. You may say that the required file size (pixels by pixels) depends on the viewing angle.
This means that a billboard to be viewed at a large distance and a normal page may have the same file size; obviously, the file size for a business card may be smaller.
Apart from all that, it is possible to recreate a photo like the leaf as vector artwork in Illustrator, and have everything as vector. If you consider that an option, you may post in the Illustrator forum to get started, and/or look round for tutorials; specific ones may very well be sugested in the forum, probably by others over there; it is past midnight over here.
http://forums.adobe.com/community/illustrator/illustrator_general

How do get a serial number for Photoshop elements 12 from my redemption code

I recently purchased Photoshop Elements 12 from Office Max and I am trying to get the serial number from my redemption code. I have followed the instructions from Adobe
as well as those provided in the box and keep getting the message that "Something seems to be wrong on our end. Please try again". I have tried multiple times and still
get the same answer. What's wrong and how do i get myserial number so I can start using this product

I was going through the same hassle with a Photoshop Elements 12 and Premiere combination box from Office Max. The receipt said that it was activated, but the numbers on the receipt and on the box were the wrong length. I finally found the 24-digit Redemption Code on a card mixed in with the other printed materials inside the box. I activated the Redemption Code through my online Adobe account and received the Serial numbers for both Photoshop and Premiere with no more problems.

How to get illustrator to print like photoshop

Similar Messages

Maybe you are looking for