How to get image using Http and how to save in Smulator
Hi guys,
Am working in black berry bold. i dont know how to get image using htp connection and one more thing i need to save this image in side simulator directory............. what are the specific API i should...
Guide me.........
If you want the input image size you need to pass it in as parameters.
A discussion thread on this topic is:
http://forums.adobe.com/thread/29948
-- Daniel R. <[email protected]> http://danielr.neophi.com/
Similar Messages
-
I would like to follow the amount of MB I downloaded and to know how much data was downloaded using WIFI and how much using 3G (internet connection by phone network provider as AT&T and so...).
Thank you very much for any suggestions.Personally I have tried LogMeIn Ignition, Splashtop, and AlwaysOnPC, as well as TeamViewer. Although LogMeIn Ignition is expensive I would also have to say that it is the best one I've tried. Apart from viewing the computer's screen, you can access the files and folders in a standalone file browser interface without seeing the computer's screen, this speeds things up a lot.
As for security, I'm not too sure, as the website for LogMeIn does not seem to list the details. But as with any other internet based service, like email and social networking sites, an additional account of any sort will increase your vulnerability, even if it's just by that small amount. You can try accessing the computer through a VPN when on a public wifi network for added security. However about the virus, I don't think that is possible... No need to worry about your iPad getting a virus. -
How to get two audio voice and how to identify its frequencies
hello,,
i am new to javax.sound .. here anybody help me in my mini project
1.. i hv to get to audio voice from two different person same time...
2 next i hv to visualize their audio frequency.... so sure that both the audio voice vary in frequency..
3.. i hv to seggregate this two audio voice and store it in different file and hv to play it separately
is here any body to help me
i will be greatly thanxful 4 ur info1. How are you getting the voices at the same time? Are these signals
coming from the same line, e.g. microphone? Or are you just reading
two audio files from disk?
2. To get the frequency of a audio signal, you'll need to do Fast Fourier
Transform to that signal. You'll propably need a third party library for this,
search for this with google.
3. If your signals are coming from the same source, it's going to be very
hard to filter out one of these voices. If you don't know anything about the
voices in forehand, I don't think this will be possible.
Give some more information about what you're trying to achieve.
kari-matti -
I've used iMessage for abit now and latly my step dad has got an ipad that is now joint to the same computer and on his ipad is my number and the email for imessage and i want to no how to get it of fully and not just untick it?
Hi barryfromwarrington,
Welcome to the Support Communities! There are two things I can think of to keep your Stepdad's information separate from yours on the computer and the iPad. On the computer, he should have his own administrative account, and on the iPad he needs his own Apple ID for iTunes and iCloud services. Here is some basic information to get started. I don't know if you have a Mac or Windows computer, so I'll include info for both.)
OS X Yosemite: Set up users on your Mac
http://support.apple.com/kb/PH18891
OS X Yosemite: Set up users on your Mac
If your Mac has multiple users, you should set up an account for each person so he or she can personalize settings and options without affecting other users.
Add a user
Choose Apple menu > System Preferences, then click Users & Groups.
Click the lock icon to unlock it, then enter an administrator name and password.
Click Add below the list of users.
Click the New Account pop-up menu, then choose a type of user.
administrator: An administrator can add and manage other users, install apps, and change settings.
Enter a full name for the new user. An account name is generated automatically. To use a different account name, enter it now—you can’t change it later.
Enter a password for the user, then enter it again to verify. Using a password hint is recommended to help the user remember his or her password.
Click Create User.
For an administrator, select “Allow user to administer this computer.”
Last Modified: Nov 18, 2014
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
http://support.apple.com/en-us/HT203206
Follow the steps below to create a new user account in Windows Vista or Windows 7:
Choose Start > Control Panel.
Open "Add or remove user accounts." (If you're using the Classic view in Windows Vista, open "User Accounts," and then open "Manage another account.")
Select "Create a new account" and follow the instructions to set up the account.
Once you create the new account, choose Start > Log Off.
Log in to the new user account.
Open iTunes and see if the issue you're experiencing persists in this new user account.
Frequently asked questions about Apple ID - Apple Support
http://support.apple.com/en-us/HT204161
iCloud: Set up iCloud
http://support.apple.com/kb/PH2609
Cheers,
- Judy -
I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion. Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine. Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer. I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs. Also the computer keeps freezing up when it is in the sleep mode, etc.
When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it. Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.Go to the menu/About This Mac - what OS version shows there?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience. -
Hello, i am new to the mac and i need to learn how to re image using an external hard drive
Hello, i am new, like baby fresh new,...lol, to the mac and i need to learn how to re-image using an external hard drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
How to get the kerning value and set it to back use script?
hi,guys
I come back again.
I encountered a kerning problem.
how to get the kerning value and set it to back use script?
Thanks very much!For both cases, the filename can be found on the FILE.ReceivedFileName Context Property. You can access this Property in a Pipeline Component or Orchestration and take any action you want, such as apply to a database.
The value is accessed by: MyReceivedMessage(FILE.ReceivedFileName)
In the case of a duplicate EDI Interchange, you would use the Failed Message Routing feature to capture the error message with either an Orchestration or Send Port. -
I reset my macbook pro a few days ago.. and when i started to use it again i noticed all my apps were gone (keynote, iMovie, garage band, etc) i don't know how to get them all back and every time i try it tells me i must buy them.. what do i do?
should i come into the actual apple store or can you help online ?Hi vickkjayy11 and welcome to Apple Support Communities,
Just to be clear, we are a peer to peer support community and have nothing official to do with Apple.
So to your problem, when you say:
"I reset my macbook pro a few days ago"
What exactly happened? Did you have a Time Machine backup?
Read this:
OS X: About OS X Recovery - Apple Support
It would help to know the exact model (size and year) and which OS you're using. -
How do I upload an image using as3 and display it without a server?
Is it possible to upload an image using as3 and flash player 9 and then display it in a movie clip without server side assistance?
thanks,
JBHi,
Check out the links..
I hope it will helps u.
http://labs.findsubstance.com/2008/04/03/as3-upload-encode-images/
http://flexscript.wordpress.com/2009/01/12/uploading-an-image-into-flash-without-server-si de-script-using-flash-player-10/
Saransoft -
Hello there,
After the 6.1.3 download, my iphone 4s has no itunes and a new hard-of-hearing blue screen SIRI after the 6.1.3 download. Where did the itunes app go? How do i get it back? And how can i switch back to the old gray SIRI?
Thanks,
lost and confusedHello there, tonjay82.
There are some great sources of information in the following article that might help you in resolving the issue at hand:
iOS: Understanding Restrictions
http://support.apple.com/kb/ht4213
Particularly of note is the following:
You can enable and adjust Restrictions, or Parental Controls, on your device to prevent access to specific features or content on the device. Locate these settings by tapping Settings > General > Restrictions.
and
Additional Information
If your iOS device is missing a particular application or if a certain feature is not available, ensure that Restrictions are not enabled. Symptoms can include:
App missing from the Home screen (Safari, Camera, or YouTube for example)
Feature or service unavailable (Siri, Location Services, and so on)
Setting missing or grayed out (such as Mail, Contacts, and Calendar; iCloud; Twitter; FaceTime)
Important: Restrictions can also be enabled or enforced using a profile (typically installed when using the device for business or education purposes). You can check for installed profiles in Settings > General > Profiles.
Thank you for reaching out to us at Apple Communities on this issue.
Cheers,
Pedro D. -
How to get image RGB/16???????? (cont)
VRect currentRect;
int32 progressTotal = tilesVert * tilesHoriz;
int32 progressDone = 0;
// process each tile in order
currentRect.top = 0;
currentRect.left = 0;
currentRect.bottom = tileHeight;
currentRect.right = tileWidth;
// don't go past the document bounds
if (currentRect.bottom > docHeight)
currentRect.bottom = docHeight;
if (currentRect.right > docWidth)
currentRect.right = docWidth;
pixelMemoryDesc.rowBits = (currentRect.right - currentRect.left) *
readChannelDesc->depth;
// read
while(readChannelDesc != NULL)
bigError = sPSChannelProcs->ReadPixelsFromLevel(
readChannelDesc->port, 0, ¤tRect, &pixelMemoryDesc);
if (bigError)
error = filterBadParameters;
throw(this);
unsigned char *imageData;// for image RGB/8, with RGB/16 is unsigned short
long temp = tileHeight * tileWidth * readChannelDesc->depth/8;
imageData = new unsigned char[temp];// for image RGB/8, with RGB/16 is unsigned short
memcpy(imageData, pixelMemoryDesc.data, temp);
FILE *file;
file = fopen("C:\\abc.txt", "ab");
if(file == NULL)
return;
fwrite(imageData, sizeof(unsigned char), temp, file);// for image RGB/8, with RGB/16 is unsigned short
fclose(file);
readChannelDesc = readChannelDesc->next;
return;
////end of customizing/////
- then we use a project to read "abc.txt" to get image:
////////// function of button that is clicked, the image is shown
void CPixelDlg::OnBtnSetPixel()
// TODO: Add your control notification handler code here
// POINT point;
unsigned char*memblock;// for image RGB/8, with RGB/16 is unsigned short
memblock = new unsigned char[HEIGH * WIDTH *3];// HEIGH , WIDTH is assigned by hard code// for image RGB/8, with RGB/16 is unsigned short
FILE *file;
file = fopen("C:\\abc.txt", "rb");
if( file == NULL)
return;
else
fread(memblock, sizeof(unsigned char), HEIGH * WIDTH *3, file);// for image RGB/8, with RGB/16 is unsigned short
fclose(file);
CClientDC dc(this);
int i = 0;
int j=0;
int k = 0;
for( i = 0; i < WIDTH; i++)
for( j = 0; j < HEIGH; j++)
if (k>WIDTH*HEIGH*3-3)
break;
dc.SetPixel(j, i, RGB(memblock[k],memblock[k+WIDTH*HEIGH],memblock[k+2*WIDTH*HEIGH]));
k+=1;
2. that code is ok for Image RGB/8. But with image RGB/16, now we don't know how Photoshop stores image data, and how to get image data to show???
Please help me?
Thanks,Use ResultSet.getBinaryStream()
-
Hi out there. To capture a screen shot one uses: Command-Shift-3 or 4. I have done this for a long time. Now suddenly neither screen shot command works anymore. Suggestions how to get this useful function back? Thanks, Georgx
Command-Shift-3 and 4 works just fine on several Macs that I have here.
Try restarting your Mac....or post in the specific support area for your Mac model....for more advice.
https://discussions.apple.com/index.jspa -
How to do archieve using SARA and FILE transaction
Hi,
I am using ECC6. i have requirement to do archiving. Please suggest me how to do archive using FILE and SARA.
Regards,
AsifHi Asif
Please go through the following links..
http://www.sap-basis-abap.com/sapta009.htm
Re: archiving data through SARA tcode
If you face any problem , search notes with SARA, you will get enough infromation.
Hope this helps.
Thanks
Anindya -
I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and why I have it
I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and w I have it
There is no need to download anything to solve this problem.
You installed the "Genieo" malware. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the malware (as long as you never reinstall it.)
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Applications/Genieo.app
/Applications/Reset Search.app
/Applications/Uninstall Genieo.app
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 2
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this trojan. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to run a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself. -
I have an old ipod (it's the very thin oblong one in purple, the one before the one that does video) and want to know how to get everything off it and into my iTunes library. My old computer died and the original library was lost, so don't have any of the content saved anywhere else. I now have an iPhone 5S and listen to music on that, so want to be able to listen to things from the old ipod too.
Can anyone help please?
Thanks very much
JaneApple normally does not get involved in handling lost objects like this. Since a real name is not installed it will be much more difficult.
You can try contacting Apple support at the US number, assume you are US going to BWI from the listing: http://support.apple.com/kb/HE57 and explain the situation and see if they offer any suggestions.
Maybe you are looking for
-
Upgrade hard drive size with mirrored RAID
First of all thanks for your help. I have a G5 XServe with (3) 250GB Drives (1) drive is for the OS .... great perfect no change needed. The other to drives are mirrored to eath other and hold 240GB worth of work. I would like to buy (2) 500GB Drives
-
Upgrading to J2SE 1.4.2-beta causes XML problems
I upgraded to 1.4.2-beta and now portlets in Jetspeed display the following error: problem in SAX transform: org.apache.xml.utils.WrappedRuntimeException: The output format must have a '{http://xml.apache.org/xalan}content-handler' property! This did
-
Hi. I have been using my Bluetooth on my phone to connect to my in-car satnav and for other purposes for well over a year without problems. However it has suddenly stopped working and when I go into Bluetooth it says "Bluetooth disabled". When I c
-
Hello. I need to restore my iPhone backup. I do not ever remember password protecting my sync/backup. The restore is asking for a password. I do not know what to do.
-
A first chance exception of type 'System.FormatException' occurred in mscorlib.dll