How to get Index storage Quality

Hi,
I want to get the storage quality of the Index for multiple Indexes.
I am albe to get the Index Quality for particular one Index by accessing following path.
DB02OLD -> Tables and Indexes -> Detailed Analysis -> Enter Index Name -> Detailed Analysis
Check storage quality by, Analyze Index -> Storage Quality
By accessing above path i have to check index one by one and its take very long time.
But I want to check the storage Quality for multiple Indexes at same time.
So is it possible to get Index Storage quality for miltiple indexes in single steps?
Regards,
Nisit

Hi Nisit Patel ,
If u have found the solution please share with me
as i also need to analyse the % of storage quality from mulitple indexes
is there any sql script for the same
thanks
Anand

Similar Messages

  • How to get your sound quality great in Vi

    Guys,
    Ive installed vista64 since i did a major upgrade along with my X-FI Gamer Fatality Soundcard, i always thought it dont sound great at all.
    Ive just figured out why, in the sound options of the control panel where you can select the quality of sound always select 48hz studio quality dont go for the 96hz studio quality.
    Do this in all the sound settings for each device and then tailor it to 5. or stereo which every you prefer, then goto the creative console and match it eg 5., stereo etc.
    If needed test the channels and see how nice it sounds. as you will notice so long as you have a decent setup it will sound more fuller in apps and games.
    I was using 96hz studio quality and always thought why it sounded so flat but as soon as i changed it to 48hz studio quality its sounding like i was using XP again, wmp sounds really good, full 5.ch and so are my games.
    You can say now im totally satisfied with vista 64/32, sounds great and it plays all my games really well. Anyways i hope this helps all you out there, let us know how you get on.

    RejZoR wrote:
    You can get best sound with this plugin for WinAMP:
    http://forums.winamp.com/showthread....readid=267586?
    Thanks for that link! That plugin brings the sound back to very close to what I had with XP.

  • How to get the storage details during 5 min interval

    Hi,
    I used below java code to collect the storage details. But i didn't get any output. Without filter condition it display all the records available in table. How to get the
    last five min data. Based on this how to change the tablequery.? I used partition key too. that also didnt work.
    1) How to use the tick count in this example.
    CloudStorageAccount httpAcc = CloudStorageAccount.parse(storageConnectionString);
    CloudTableClient tableClient = httpAcc.createCloudTableClient();
    CloudTable table = tableClient.getTableReference("$MetricsHourPrimaryTransactionsTable");
    Date date = new Date();
    SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd"); 
    TimeZone utc = TimeZone.getTimeZone("UTC");
    sdf.setTimeZone(utc);
    String upperBound = TableQuery.generateFilterCondition("TIMESTAMP",QueryComparisons.LESS_THAN,sdf.parse("2015-02-04")); // // sdf.format(cal.getTime())
    System.out.println("call lowertime ->"+upperBound);
    String lowerBound = TableQuery.generateFilterCondition("TIMESTAMP",QueryComparisons.GREATER_THAN,sdf.parse("2015-02-01"));
    System.out.println("call uppertime ->"+lowerBound);
    String filter = TableQuery.combineFilters(upperBound, Operators.AND, lowerBound);
    //String startTick = TableQuery.generateFilterCondition("TIMESTAMP",QueryComparisons.GREATER_THAN,sdf.parse("2015-09-03"));
    //System.out.println("the startTick==="+startTick);
    //String tick = TableQuery.generateFilterCondition("PartitionKey",QueryComparisons.GREATER_THAN,startTick);
    TableQuery<DynamicTableEntity> query = TableQuery.from(DynamicTableEntity.class).where(filter).select(new String[] {"Availability","TotalRequests","PercentSuccess"});
    for (DynamicTableEntity ent : table.execute(query))
    EntityProperty countProp = ent.getProperties().get("Availability");
    if (countProp == null) 
    throw new IllegalArgumentException("Invalid entity, Count property not found!");
    System.out.println(countProp.getValueAsString());
    EntityProperty countProp1 = ent.getProperties().get("TotalRequests");
    System.out.println(countProp1.getValueAsString());
    EntityProperty countProp2 = ent.getProperties().get("PercentSuccess");
    System.out.println(countProp2.getValueAsString());
    Regards,
    Rathidevi
    rathidevi

    checkout this document for secure web application
    http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf6167e-7fff.html    

  • How to get index of the item from table when user double click on an item

    Can anyone tell me how to get the corresponding index of a table in which
    elements are listed as array of strings? I am looking for the index of the
    item being double-clicked on?
    Thank you in advance
    Cheers,
    NQ.

    Hi NQ,
    Although the question is not thouroughly clear, I can give a few suggestions. You can use the property node for table to refer to any particular row or column of the table. The correpsonding elements in the property node will be "SelStart", "SelSize" etc. Just as a side thought, the index of a table starts with (0,0).
    I am attaching a test file. Please see if it helps you in figuring out what exactly you want. This example VI is just to help you try different options under property node (if you havent already tried)to get what you want.
    Regards,
    Sastry Vadlamani
    Applications Engineer
    National Instruments
    Attachments:
    test.vi ‏27 KB

  • How to get the maxmum quality on a normal DVD DL

    Hey can someone tell my how i can get the max quality on a normal DVD DL with FCP and DVDpro the dvd's that i made are not from that quality that i hoped.
    Robert

    Encode rates are dependent on the length of the video in total minutes.
    For example, a 60 minute DVD should be encoded at a maximum bit rate of about 6.8 mbps if you use Dolby2 audio is you intend to burn it on a single layer DVD.
    Do the math from there, but remember that you can't go beyond a combined bit rate of 10.2 for video and audio

  • How to get more storage on my phone (I just bought the 10GB and thought it would help but it hasn't)

    How do I get more storage on my Iphone 5s? (I just bought the 10GB and thought it would increase my storage but it didn't)

    No it is a backup on iCloud ,a backup  replicates what you have on the device on to another device or cloud, it does  not moves it anywhere
    Do you have a PC or Mac if so use this advice
    http://support.apple.com/kb/HT4083

  • How to get more storage on icloud?

    I have been getting notices from Apple to upgrade my cloud storage but haven't figured our how to do that!!!! Please help?

    Are you an ex-MobileMe subscriber who has complimentary extra storage due to expire on September 30th? If not, see the link above. If you are, please see
    http://support.apple.com/kb/HT5527
    and expand the section under 'How do I purchase my current plan' applicable to your Mac or device.

  • How to get good picture quality on a burned DVD slideshow using IDVD?

    After producing a slideshow on IDVD from either jpg or psd photos, it looked great when I played the project. Picture quality was excellent. When I burned a DVD to share the slideshow with a friend and when I played this on the same computer, it had lost resolution and looks awful. I am using best quality but this made no difference. On a hdtv using a standard player, the quality is mediocre. Is there any way to get a decent picture quality. I have also burned a DVD and CD from the IPhoto album, and the quality is better. IPhoto will not burn a slideshow or at least I do not know how to. Can you produce decent quality DVD using IDVD or is there a better application to produce decent DVD of photo slideshows?

    ....or is there a better application to produce decent DVD of photo slideshows?
    Yes. It's called DVDSP (apple's top of the line DVD Authoring application). It has a much longer learning curve than iDvd and is more $$$ but it does work well. The Help Menu alone is over 640 pages long. However, is this app significantly better than iDvd solely in terms of visual quality?.... No.
    But it does offer many more tools to address visual artifacts on the finished DVD, more audio control, much better control of durations per slide, audio, buttons that work as expected, among other things. (for additional examples of this see chapter 12 of the DVDSP Help Menu / starting on p. 373).
    Short of DVDSP, and much less money, you can also try these 2 third party apps which come highly recommended on this iDvd Forum:
    http://www.lqgraphics.com/software/phototomovie.php
    http://www.boinx.com/fotomagico/overview/
    At the moment most macs do not yet support burning to Blueray (which does offer much better results). Once this technology is more commonplace, then I believe we will see a significant improvement in what you are trying to do above.
    Hope this is helpful but if not just come on back.
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

  • How to get best possible quality ?

    Hey whats up!
    I wonder how can i get a best possible quality out of After Effects? I dont care about size , i just want best quality.
    Every time i record PC gameplay then i edit a little bit on After effects , but when i render it it loses some quality and when i upload on Youtube its not even 1080p. I mean i have option in youtube to watch it in 1080p but quality is not 1080p! Any advice?
    Thanks!

    At the moment, this isn't about "quality", this is about horizontal and vertical dimensions of the video, and guess what?  You don't even MENTION them! Maybe you ought to try looking up those properties of your video clips and reporting back in.....

  • How to get real fullscreen/quality Spiderman3 movi...

    Hi folks,
    well, my question is, not how to convert Spiderman3 from DVD to N95. In fact I converted it already, and it is running.
    But, I want to know, with which software I can convert Spiderman3 from DVD exactly the same like the original which has been on the mobile. I lost my activation key due to firmware-updating. With exactly the same, I mean without cutting the picture and looking full screen, without any black stripes... Because every converter (I tried a lot of, SUPER, DVDFab, AVS video Tools, Daniusoft, handbrake...) besides the cucusoft video converter cannot do real full screen converting to 320x240. Everytime you have to cut the picture, so something is missing, or there are small black stripes top and bottom. And Cucusoft quality is lets say, not good... but this works fullscreen without cutting anything.
    Or to simplify the question, does anyone know, which converter Nokia used to convert it to the phone? Or is this a private converter, not available for the public? Or has something like adjusting the Display Aspect Ratio (DAR) and Pixel Aspect Ratio (PAR) to do with that and can solve my problem?
    Sincerely
    TigertheGambler

    The problem is the source DVD!
    See if you open a DVD stream it's size is usually 720x480 which is an aspect ratio of 1.5 but the actual video is aspect ratio of 2.35 so what they do is they put the black bars already in the DVD video!
    So when you put Pan&Scan option in the ripper it calculates these black bars as being part of the picture, so it converts from 1.5 to 1.3333 aspect ratio (320x240), but in reality it should convert from 2.35 to 1.3333.
    This is further complicated because some movies use also other aspect ratios like 1.778 (16x9) or 1.85 (cinemascope) but then they put those also into 1.5 DVD.
    So what can you do. First is figure out what the actual video screen aspect is. Most DVDs will have this information in the back of the box.
    Then get a calculator and figure out how many pixels are there in the vertical and how many pixels are there in the video feed. So if its a 2.35 anamorphic movie and the video size is 720x480 the actual video size is only 720x306 so there are 87 extra black pixels in the top and bottom.
    So in order to get full screen you would have to first copy the movie into WMV or AVI (but you must have DIVX codec installed in your machine to use AVI or FFMPEG). And don't change the resolution leave it in auto.
    Now you will have a DIRECTSHOW file that has the black bars. Now you will use SUPER encoder (www.erightsoft.com) to re-encode this video. Encode into WMV or AVI if you want to further encode it or directly into MPEG-4 if you want. Use the DIRECT SHOW BUTTON and then you will have to use the CROP/PAD and you will crop the picture.
    156 pixels on each side and 86 on the top and 88 on the bottom. This will create a video that's 408x306 (or 1.333333). Now you could either use this video as is (it should work in N95 and newer devices)
    Or now use Super again and encode into the right size. (320x240).
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • How to get good image quality for an icon

    In the constructor of the main class which extends JFrame I set an icon by saying:
    this.setIconImage(new ImageIcon("image.jpg").getImage());
    This does not only set an icon on the title bar and the minimized window, it also creates an icon on my saved files (which are created with JFileChooser and ActionListener). However, the image quality of the icon on my saved files is bad, even though the image quality of the other icons is ok.
    The bad quality image has broken lines where it is supposed to have smooth lines. The size of the image I am providing is close to the size of the icon on my saved files, but the image I am providing looks a lot better (in Photoshop) than the icon.
    How did the icon get created for my saved files? Is it possible to improve the image quality?
    Thanks for looking at this!

    Well, it wasn't Java that created the icon on the saved files. It was the operating system, which used the icon that I had on my executable, once I said "open with" this executable.
    Well, now I am using a better icon maker program from Axialis, which creates icons at different sizes, and the icon on my saved files look perfect.
    Sorry for taking your time thinking about this.

  • How to get best picture quality using iDVD to burn a movie from iMovie?

    I would appreciate any guidance on options to choose and approaches such that I get the best picture quality when I view an iMovie product on a wide screen HD TV using a DVD burned with iDVD. Choose wide screen or standard format in iMovie? Best Performance or Prof. Quality in iDVD? ...

    Good Morning,
    My computer is using Snow Leopard 10.6.5 and has ilife 09 installed on an imac. I have been reading it is better to use imovie 06. When I tried to do a custom install from the 06 disk imovie and idvd were grayed out but had a checkmark. It would not let me deselect idvd. Not really knowing how to do this I quite the process. Can you or someone please advise me on how and what exactly to do in order to accomplish a custom install of imovie 06? Should I delete imovie 09 first? If so how is this accomplished. Perhaps it would be less complicated to purchase photo to movie? Really do not want to spend unless it is necessary since I only know a little about what I'm doing but enough to be dangerous to my computer
    Thanks,
    reverseimage

  • How to get Index of a single element in a table

    Hi Gurus,
    I need to get the index number of the element in a table even if the row is not selected.
    I've already searched the forum for this but all i'm getting are selected rows in the table.  I need to get the index even if that elemen's row is not selected in the table.
    Please advise.
    Regards,

    Hi,
    Could you please specify what exactly you want to do?
    You said you want to get the index of an element even if the corresponding row is not selected. But there might be more than one element where the correponding rows are not selected. So it would be better if you could be more specific about what you want to achieve.
    Regards,
    Srilatha

  • How to get indexes of a pattern in MessageFormat

    Hi friends,
    Any urgent help will be much appreciated.
    I've a pattern like this "INSERT INTO SOME_TABLE values({0}, {1}, {3}, {5}, {7})"
    before I format this pattern, i want to collect the indexes(0, 1, 3 etc) into a collection from this pattern.
    Is it possible to do that progrmatically? Whether the MessageFormat can help in this?
    I want to know the indexes, since using the indexes i've to call the setter methods of PreparedStatement.
    Thanks!

    When I add a component on JPanel with FreeDesign layout (I use NetBeans GUI editor to do it), in generated code I find org.jdesktop.layout.GroupLayout with some HorizontalGroup and VerticalGroup components, and no bounds are ever set!!! When I start the application, a component is shown on JPanel, and definitely bounds are not 0,0,0,0! The components are stretched over window, and everything looks just as I set in GUI editor. A problem is that in runtime I need to know bounds of a component that is showed on screen. A method getBounds() returns (0,0,0,0), so I think that it is not appropriate for this layout.
    So, my question remains: How to find out bounds of a component in FreeDesign layout!
    Thanks!
    Message was edited by:
    mmilic

  • How to get index of an item in the DropDownByKey control?

    Hi,
    I'm new to PDK for .NET and I have a simple question about the "IndexOf" method of the items collection.
    Attached a small test program:
    Dim li As New DropDownListItem
    li.Key = "A"
    li.Text = "Zero"
    DropDownByKey1.Items.Add(li)
    li = New DropDownListItem
    li.Key = "B"
    li.Text = "One"
    DropDownByKey1.Items.Add(li)
    li = New DropDownListItem
    li.Key = "C"
    li.Text = "Two"
    DropDownByKey1.Items.Add(li)
    li = New DropDownListItem
    li.Key = "D"
    li.Text = "Three"
    DropDownByKey1.Items.Add(li)
    li = New DropDownListItem
    li.Key = "E"
    li.Text = "Four"
    DropDownByKey1.Items.Add(li)
    Dim liForSearch As New DropDownListItem
    liForSearch.Key = "C"
    liForSearch.Text= "Two"
    Write(" Index --> " & DropDownByKey1.Items.IndexOf(liForSearch))
    The output should be 2 but instead I get -1 (Not Found).
    Why?
    thanks,
    Omri

    Hi,
    Since you have the Key of the listItem you are looking for you should get the item by applying:
    liToSearch = DropDownListItem.Items[key];
    int index = DropDownListItem.Items.IndexOf(liToSearch);
    Regards,
    Tsachi

Maybe you are looking for