How to get info over snmp on cisco switch whether native vlan on a port is tagged or not?

Hi!
I want to know which oid(s) should I query to know whether native vlan on trunk port on cisco switch is tagged or not?
I am querying the oid .1.3.6.1.4.1.9.9.46.1.6.3.0 (vlanTrunkPortsDot1qTag) on cisco 3560 (E Series) and I am getting global value. Also, this OID is showing as deprecated. So I query .1.3.6.1.4.1.9.9.246.1.6 (cltcDot1qAllTagged) and its subtree, but no value is returned.
Switch Version is
Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 12.2(50)SE2

Keep in mind that DHCP is a broadcast packet to start. So the AP can only listen in the subnet that it has an IP address for.
Now, for any other subnet you can use the AP for DHCP but you have to have an IP helper address on your L3 pointing back to the AP.
That being said, I wouldn't use the DHCP server on the AP as it is limited. You'd be better off using a Microsoft server or some other device that is designed for DHCP.
HTH,
Steve

Similar Messages

I have a new MacAir and don't know how to get info from my USB stick and my SD photo card. Can anyone help me please?

I have a new MacBook Air and don't know how to get info from my USB stick and get info from my SD card. Can anyone help, please?

Plug the stick and/or card into the appropriate slots on the side of your Air. Do you see icons for the devices appear on the desktop? Click into them to see what files are there.
Matt

HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try. I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
Thanks for any help!

If you have a time machine back up of your current drive you can do this
Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

How to get info from a layer which is applied with styles ?

How to get info from a layer ? such as   ( apply style or not , which effect have applied on it etc..)
I really can't solve it , Who can hlep me.. By the way , I 'am using CS version.

xtools/xlib/Styles.js has a set of functions for working with layer styles. I do not know if it works with CS. I wrote it several years ago for either CS or CS2. If this doesn't work, then nothing will. The script retrieves a layer's style by saving it to disk then parsing the file for the desired ActionDescriptor.
There is a function at the bottom of the file that tests the Styles.js API.
Styles.test = function() { var doc = app.activeDocument;
var layer0 = doc.artLayers[0];
var gdesc = Styles.getLayerStyleDescriptor(doc, layer0);
if (!gdesc) {
    alert("There is no layer style associated with the layer");
    return;
//   this will set the layer style to another layer.
//   var layer1 = doc.artLayers[1];
//   Styles.setLayerStyleDescriptor(doc, layer1, gdesc);
if (!gdesc.hasKey(cTID('FrFX'))) { // look for a stroke effect
    return;
var frfx = gdesc.getObjectValue(cTID('FrFX'));
if (!frfx.hasKey(cTID('Clr '))) {   // look for the color
    return;
var clr = frfx.getObjectValue(cTID('Clr '));
// we should really check that the objectType is RGBC
var r = clr.getDouble(cTID('Rd '));
var g = clr.getDouble(cTID('Grn '));
var b = clr.getDouble(cTID('Bl '));
if (r == 0 && g == 0xFF && b == 0xFF) {
    return;
clr.putDouble(cTID('Rd '), 0);
clr.putDouble(cTID('Grn '), 0xFF);
clr.putDouble(cTID('Bl '), 0xFF);
frfx.putObject(cTID('Clr '), cTID('RGBC'), clr);
gdesc.putObject(cTID('FrFX'), cTID('FrFX'), frfx);
Styles.setLayerStyleDescriptor(doc, layer0, gdesc);

How does Get-Info manage ext disk access & permission

I was having a terrible time today trying to back up my HD to an external drive. I was using SuperDuper. The SD dialog box allowed me to choose 2 of my ext drives as targets. But the drive I preferred was 'greyed out'. I couldn't select.
So, I thought that perhaps I didn't have read-write permission for it. I pulled up a Get Info dialog box, and this is how it is configured (see below).
My user name doesn't even appear in the Sharing and Permissions box. Nor do I see the little check box which asks IGNORE OWNERSHIP.
I clicked on the little padlock icon and entered my password. But I still couldn't change the configuration. I just wanted to back up to that one disk named 2tb Boot-backup. Nothing more. The drive is a boot drive, incidentally. But I was running the OS on my main HD (iMac).
Frustrated at this (the Missing Manual didn't help), I gave up and reinstalled Mavericks on that ext drive. It fixed the problem, at the cost of 2 1/2 hours.
And I'm not any wiser about how Mavericks controls access. Screen shots below tell the story. My User Name does not appear in the Sharing list. Please teach me. Where is David Pogue when you really need him?

For a very long time before making my purchase choice, I neurosed about the processing power demands if Aperture. Few folks at MacRumors knew what specs would suffice. I must have exchanged 15 posts over there and learned little.
At the time I had a 2007 iMac with 6Gb or RAM. I borrowed Aperture from a friend and played with it. Knowing that would I made a computer purchase from the Apple Store, free softeware would come with it. I prefer to be play straight. Not because of fears of the 'software pirate police.' I want the support and documentation.
By having the actual program loaded in my box, I began paying watching the Aperture Tutorials on the Apple Support website. In the case of Aperture, there is a whole lot to learn. A huge amount. Maybe because it was my first PP and DSLR experience. It took a lot of time to get comfortable.
Eventually, I discovered more AP tutorials on YouTube. And then, I found the so-called Silver Bullet. The Aperture forumlll. The answer I wanted was neither simple nor straightforward. But I was able to decide on the right Apple machine, with an adequate CPU, GPU and RAM.
Aperture processes some function in the CPU. It processes others in the GPU. And RAM undergoes heavy pressure only at certain times. While 'Importing' RAW files from an SD card, the CPU works hard. It is best to have clock speeds of at least 3.2Ghz. Along with the image, Aperture will import the embedded camera preview in Jpeg format. Things go faster if you select to import the file and preview. Regardless, camera previews are small and low resolution. Aperture then favors generating its own hi-res JPEG for use will browsing your library of photos.
Editing an image, which is called an 'Adjustment' in the program doesn't take nearly as much processing power as one would expect. Aperture is a non-destructive program. The original RAW file is never touched. All the changes are merely tacked on and are reflected on the screen or when saved as 'Versions' only. The version is tiny compared to the master file. A good metaphor would be baking. You might start out with a Lemon Cake in the oven. But then you put Chocolate frosting on top. The result looks and tastes different. But it is always a Lemon Cake.
The GPU then takes over. Late generation GPU with at least 1000Mb of video ram, 32-bit color depth would be minimum. The NIVIDEA Geoforce GT 755 satisfies those demands. Though if I ever start playing with Video instead of Sill, I might wish for 64-bit color space.
I probably have some of the details mixed up. But the fundamentals given are what I heard. At least one of the responders on the Aperture forum was on Apple team that wrote the software. That's all I know, and I'm not trying to get anyone to 'change religions'. SSD ain't going to make my image editing improve. Incidentally, on my iMac, Aperture loads in about 4 seconds.

How to get info from a .class file at run time? thanks for help

I need to get methods and properties (variables) from a .class file at run time.
as u know, javap.exe can do that in an independent way. but i need to get info at run time once the .class or packeges have been changed, javap is not suitable in the case.
i try to read data directly from .class file but it's hard to know the file format.
e.g. a class looks like (java file):
class MyClass extends Frame
int i0;
String s0;
public String getName()
if the file is compiled to .class file, how to get properties (variables: i0,s0) and methods String getName() from the .class file by an applicaton at run time?
Doclet is not suitable for speed reason, it is too slow to get right info in right format.
Thanks for any help, please write a little bit more in detail if you know.

Use the Java Reflection API. Have a look at the Reflection section of the Java Tutorial located at http://java.sun.com/docs/books/tutorial/reflect/index.html

How to get info about the mobile, like screensize...

hi,
i need some info about the device my midlet is running on.
how is it possible to get info about the screensize, screentype(color/black) and perhaps devicetype or modelname?
i already read it somewhere but i didn't find the source again.
tia
mmkl

thx,
the example below shows some basic information.
Display myDisplay = Display.getDisplay(this);
Displayable dis = myDisplay.getCurrent();
int high = dis.getHeight();
int width = dis.getWidth();
boolean isCol = myDisplay.isColor();
int nubCol = myDisplay.numColors();more detailed information about model, aren't available through the standard api, on blackberry's there some restricted apis that provide these device-type and other detailed information...
for more basic information, just look at the class-methods from display and displayable...
mmkl

Marydee-You asked me about resizing apps for jpeg images & how 2 get info

Marydee- You asked me about resizing apps for jpeg images. And you also asked how to get photo info for each image in iphoto
Here's what I found in the iPhoto6 Help Menu:
Showing a photo's image and camera information
iPhoto stores EXIF information with each photo in your library. This information includes the photo's image size, the date and time it was taken, and the type of camera it was taken on, as well as important exposure information, such as the shutter speed, aperture, and film ISO.
To show image and camera information:
Select the photo and choose Photos > Get Info.
You can also see a photo's title, date taken, rating, format, and comments by clicking the Information button in the bottom-left corner of the iPhoto window.
Also please take a look at these prior discussions in iPhoto Forum/s:
http://discussions.apple.com/thread.jspa?messageID=3212997&#3212997
http://discussions.apple.com/thread.jspa?messageID=4535542&#4535542
http://kstudio.net/re.html
Hope the above helps and good luck on this.
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8)

Marydee- You asked me about resizing apps for jpeg images. And you also asked how to get photo info for each image in iphoto
Here's what I found in the iPhoto6 Help Menu:
Showing a photo's image and camera information
iPhoto stores EXIF information with each photo in your library. This information includes the photo's image size, the date and time it was taken, and the type of camera it was taken on, as well as important exposure information, such as the shutter speed, aperture, and film ISO.
To show image and camera information:
Select the photo and choose Photos > Get Info.
You can also see a photo's title, date taken, rating, format, and comments by clicking the Information button in the bottom-left corner of the iPhoto window.
Also please take a look at these prior discussions in iPhoto Forum/s:
http://discussions.apple.com/thread.jspa?messageID=3212997&#3212997
http://discussions.apple.com/thread.jspa?messageID=4535542&#4535542
http://kstudio.net/re.html
Hope the above helps and good luck on this.
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8)

How to "get info" on collection...

There is something I want to know how to do that I use to do when I was on a Windows computer. I know how to right click & 'get info' on a single file, or a small group of them, but the problem is that each file that is highlighted, has it's own pop-up window with the info. Is there a way I could for example, go into my music folder, highlight about 25 songs & see how big of a package it would be to put on a CD, without having 25 separate windows popping up telling me the size of every single one? I know a possibility is to put those 25 songs in there own folder & then 'get info' on that folder, but I find myself doing this kind of action many times a day & making a new folder to move the files into is too time consuming. If anyone has an answer to this problem, please let me know. It would help me out so much. Thank you.
MacBook Pro Mac OS X (10.4.8)

I figured it out. to anyone else who wants to know, Hold CommandOptionI when you have highlighted the items.

How to "Get Info" in the iTunes Store

In the usual part of the iTunes Store, you cannot "Get Info" about media, but there is another section where you can. First, find out the item's Genre or Category.
If it is Music, find out the Artist and Album.
If it is an Audiobook, find out the Author/Narrator.
If it is a Music Video, find out the Artist.
If it is a TV episode, find out the TV Show and the Season.
Go to the iTunes Store. Scroll to bottom. There are 4 columns. Under the 2nd column, Features, choose Browse. Choose the media type (Movie, Music, etc). Choose the Genre or Category. Next:
if Music:
Choose All for a Subgenre. Choose the Artist. Choose the Album. Right-click on the desired song, and choose "Get Info."
if Movie or App:
Right-Click the desired item, and choose "Get Info."
if Audiobook:
Choose the Author/Narrator. Right-Click the desired item, and choose "Get Info."
if Music Video:
Choose the Artist. Right-Click the desired item, and choose "Get Info."
if Podcast:
Choose All for a Subcategory. Right-Click the desired item, and choose "Get Info."
if TV show:
Choose the TV Show. Choose the Season. Right-Click the desired item, and choose "Get Info."

One stated to "search cmd, right click, and run as admininstrator" but where is this?
In the search field in your Vista start menu, type cmd
Next, right-click on the cmd that comes up and select "Run as administrator".

How to get info from weblogic-ejb-jar.xml? (MDB)

I'm writing an MDB which is part of a request/reply. In order to reply, I
need an initial-context-factory and provider-url. Is it possible to get
this information using the MessageDrivenDescriptorMBean class? I can see
that MessageDrivenDescriptorMBean has getConnectionFactoryJNDIName() and
getProviderURL() which should be what I want, but I have no idea how to get
an instance of MessageDrivenDescriptorMBean. Can I do that in the
setMessageDrivenContext method of my MDB?
If not, I can put that information in the env, but I'd rather not do that as
it is redundant information.
Thanks.
Eric

Forgot... WL6.1.
"Eric F" <[email protected]> wrote in message
news:[email protected]..
I'm writing an MDB which is part of a request/reply. In order to reply, I
need an initial-context-factory and provider-url. Is it possible to get
this information using the MessageDrivenDescriptorMBean class? I can see
that MessageDrivenDescriptorMBean has getConnectionFactoryJNDIName() and
getProviderURL() which should be what I want, but I have no idea how toget
an instance of MessageDrivenDescriptorMBean. Can I do that in the
setMessageDrivenContext method of my MDB?
If not, I can put that information in the env, but I'd rather not do thatas
it is redundant information.
Thanks.
Eric

How to get info about web service caller inside Web Service

Hi..
I want to know that can we get info about Web Service Caller inside called web service..
Info Like IP Address, User Id, User Name
Regards,
Ajay Sharma

Hi,
I tested following code using JDevloper 11g
@Resource
    WebServiceContext wsc;
    @WebMethod
    public String webMethod() {
                MessageContext msgCtxt = wsCtxt.getMessageContext();
        HttpServletRequest req = (HttpServletRequest)msgCtxt.get(MessageContext.SERVLET_REQUEST);
        System.out.println("Client IP = " + req.getRemoteAddr());
        return req.getRemoteAddr();
    }It is giving me IP address but when i tested this web service from another computer there also it is giving my machine address instead of the machine IP from where the web service is called.
What is wrong in my code ?
Regards,
Ajay
Edited by: Ajay Sharma on Dec 31, 2012 1:06 PM

How to get the trial version of adobe access whether can protect content

i submit info in
https://www.adobe.com/cfusion/mmform/index.cfm?name=flash_access_trial_cert
but nobody contact me..
How to get the trial version of adobe access?
Thanks

Hello,
Apologies for that! Currently, Adobe is shut down for the holidays which is why you're seeing a delay. Adobe will resume work again on January 2nd.
If you can private message me your contact information, I can contact our sales team to make sure they are aware of your request.
Sent from my mobile,
/Eric

HT5312 I really need help. I forgot my security question answers and i dont remember them. I dont know how to get to this email thing and i dont remember if i ever set one up or not.. Please help quickly

I forgot my security questions and i dont know how to get to the email rescue and don't think i ever set one up with my account.. Please help me !!!!

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Power Over ethernet on Cisco switches - why??

I administer 3 servers (two g4 towers and one xserve attached to an XCraid) and 50 Macintosh workstations in an agency/production group within a fairly large company (2000+). Like most major companies the majority of the computer and servers are Windows based (specifically DELL) with CISCO switches.
I ran into a problem today where a switch was updated the "OS of the swithc" without my knowledge by our Infrastructure group. This resulted in a very high latency problem when pulling files from our Apple servers. After some digging we determined that the feature "Power Over Ethernet" had been disabled when they updated the switch's OS. Once we enabled PoE back on those ports, it was back to business.
My question here is, why does this feature have to be enabled? All DELL servers reconnected without a hitch. I hear PoE is only really resevered for VoiP devices and such. What is it with Apple servers that need this feature turned on?
Look forward to hear from you all.
Xserver, Xraid, G5, etc Mac OS X (10.4.6)

I can confirm that portfast makes a huge difference, as the autonegotiation between the switch and the client is performed inside of about 2 seconds, rather than the standard thrash-around period of about 40 seconds that some ethernet devices can use to determine line speed and simplex / duplex operation.
Turn on portfast on any switch ports that you don't plan on using for trunking / uplinking. When you do this, it tells the switch that there isn't a managed switch / router downstream, so it doesn't need to try to negotiate routing protocols and whatnot - it greatly speeds up the autonegotiation process.
Also, on some Cisco switches (We found it on a Cisco Catalyst 4006) if you lock the port to a specific operating speed / mode (e.g. 100Mbps / full duplex), the Mac doesn't like it nearly as much as if you leave it to autonegotiation. We were having the exact same issue the OP is seeing (limited bandwidth, massive CRC error count) until we put it back to auto and enabled portfast, and then we got the performance we expected, without recurrence of the issue.

How to get info over snmp on cisco switch whether native vlan on a port is tagged or not?

Similar Messages

Maybe you are looking for