How to get information regarding WF table

My scenario is this.
When a employee applies leave a notification is sent to 1st of his three supervisor in the hierarchy. If he approves the notification is sent to 2nd supervisor. After his approval a FYI is sent to final supervisor. If a employee has sent a request and if the supervisor has not responded for that request within a day then a reminder notification has to be sent to the supervisor again. I have no idea as of what to do.
Is there any query available to track this in backend?

Hi,
I do have the similar problem. I am using the timeout specifications and set the frequency to 1 hour and max notifications to 10 while testing. First email was sent out when the manager was not responded within 1 hour, But after 2 hours when I ran the NEM_MAIN, It is not sending any reminder emails to the manager.
Edited by: 951696 on Aug 8, 2012 2:28 PM

Similar Messages

How to get information about cursor? I had only a reference on it.

Hello
How to get information about cursor, that I receive in my procedure as a reference. For example I need to know, a number of columns. I know nothing about this cursor, except the link on it.
Best Regards, Kostya Proskudin!

However, I would seriously reconsider what you are trying to achieve.
It looks like you are trying to write some ultimately generic cursor processor. i.e. pass any cursor and process it in some generic way.
Good design should include knowledge of what is expected to be passed and that knowledge can be put into the code.
Generic code is inherently difficult to maintain and debug and will never 100% deal with all possible situations e.g. even if you know the table being queried in the cursor you can't rely on the data dictionary to give you all the returned columns if some of the returned columns of the cursor are computed columns.
Be careful you aren't writing something that's going to cause problems later.

How to get all rows in table to red using alternate rows properties option

How to get all rows in table to red using alternate rows properties option

Hi Khrisna,
You can get all rows red by selecting the color red in the "Color" and "frequency" to 1 under the "Alternate Row/Column colors".
I tried doing it and the colors freaked me out (all red) :-D
Kindly tell me if im missing something.
Regards,
John Vincent

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL USING 10g Database and 10g Application Server
we have developed an application using oracle forms 10g with
oracle database 10g and Application server 10g
Application uses a single Oracle User name to connect to database
where as at Application level there are different users (these are not database users)
Now how can we get the information about the user/his machine etc. at database level. earlier in 6i/8i we use to get by using
USERENV('TERMINAL')
we had written a triggers on tables on Insert/Update where we used to update a database field Last user terminal with USERENV('TERMINAL')
but not this information is comming to be the machine name of application server where as we wish this to be the machine name of Client. Any Way outs
thanks
Chaand Kackria

hi, you can use the sys_context function, like this:
select sys_context('userenv','current_user'),
     sys_context('userenv','os_user'),
     sys_context('userenv','host'),
     sys_context('userenv','ip_address'),
     sys_context('userenv','instance'),
     sys_context('userenv','sessionid'),
     sys_context('userenv','terminal')
from dual;
Is this what you 're looking for?

How to get informed by email about changes on service messages of the servi

How to get informed by email about changes on service messages of the service desk.
I need a kind of overview
functional details
and a very good guideline to do the implementation
Does anyone know how to do it?

Hi,
Go throw this
Note 691303, Note 1041455
you will find each and every thing abt implementation .
Send mail to Message Processor in Service Desk
Points if helpfull
Regards,
Neni

How to get information about creation of a virtual machine on a Hyper-v host.

Hi,
How to get information about creation of a virtual machine on a Hyper-v host?
I need: host name, time created, creator user.
I saw in Hyper-V-VMMS but I found info about movements of VM between hosts.
Thank's in advance.
Denius Valiant

For Host Name * Created Time Use This Command In PowerShell
Get-VM -Name (Read-Host "Type Your Vm Name") |select CreationTime , ComputerName
and for Create User , As i know you should see on Event Log .
Go To Event Log Viewer--->Applications And Services Logs--->Microsoft--->Windows--->Hyper-V-VMMS--->Operational
You can see in Event Log who create the Vm.
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook:

How to get information about limitation Internal Memory on device

hallo ..
have some question here, so please some person able to answer my questions
1. How to get Information about limitation internal memory on device
2. is possible to improve internal memory on Blackberry ( move apps on external memory )
3. any tools to get internal memory activity ?
thanks for this people who joins here, hope we can share more information about blackberry ..

In addition...
There are three types of potential memory on a BB: 1) Application Memory, 2) Device Memory, and 3) Media/SD Card Memory.
Application Memory -- This is the most crucial; it is the protected (not user accessible), dedicated, and fixed (in size) space that is available as the destination for the installation of applications (plus some application storage, overhead and such). You cannot touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can only install here...there is no option.
Device Memory -- This is space on your BB that you can touch to store files, pictures, media, etc. Typically, it is not terribly large, but it is available to you.
SD/Media Card Memory-- This is what it says...your SD card, for you to store files, media, pictures, etc. It can be as large as your BB OS can support...see this KB:
KB05461MicroSD card sizes supported by the BlackBerry device software
On some devices/OS levels, you can only see "File Free" (Options > Status), which I think is equivalent to AppMemory. On other devices, you can see all three memory usage levels (Options > Memory). Here are some guidelines to use:
KB02843What is the Low Memory Manager feature on the BlackBerry smartphone
KB14320How to maximize free space and battery power on the BlackBerry smartphone
KB14213Call logs, SMS text messages, and email messages are deleted from the BlackBerry smartphone
Lastly, it is always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can I get information regarding the client browser using JSP

can I get information regarding the client browser using JSP. like.. name, screen resolutions, font type, screen width and height of the browser etc.,
if possible then please give me the samples..
thanks,

can I get information regarding the client browser using JSP. like.. name, screen resolutions, font type, screen width and height of the browser etc.,
if possible then please give me the samples..
thanks,

How to get value on the table control in infotyp e0008

Dear Freinds
I have written a user exit ZXPADU02 for my requirement
as per the requirement in i have calculated wa-poo8-bet01 = wa_p0008-ansal/12 and i have passed on to the INNNN structure .
Nowe when do a Create or Copy for a rcord in infotype 0008 iam not
getting value on Q0008-betrg field on the SCREEN , since it is table control how to get data on the table Control Cell .
Please let me knlow
regards

Hi Syamala,
The try to find the name of the table control and pass the values to it.
Of course you have to loop and endloop, the table control and mofidy it from the work area.
Message was edited by:
Sera

How to get information from my laptop to my ipad

I`m new on I-pad
How to get information from my laptop to my ipad
Saludos
Josè Montero

Heres some Apple Support tips on the subject.
How to transfer and sync content to your computer:
http://support.apple.com/kb/ht1296
How to transfer files between your computer and mobile apps:
http://support.apple.com/kb/PH1693
How to do file transfers:
http://support.apple.com/kb/HT4094

How can get Information of Exfect in Illustrator by Script?

Illustrator can setting Effect: Illustrator Effect, Photoshop Effect to Object,
But i find in document not exist attributes can get their information.
How can get Information of Exfect in Illustrator by Script?

How about get item count of table in formGroup.vm

JHeadstart Team:
I want change maxColumns=" 1" or" 2" by item count of table .but I do not know how about get item count of table .
#if (${JHS.current.group.columns} > 10)
#set ($majin = 2)
#else
#set ($majin = 1)
#end
<af:panelForm rows="1" maxColumns="$majin" width="${JHS.current.group.formWidth}" id="${JHS.current.group.shortName}FormItems">
majin
#FORM_ITEMS()
</af:panelForm>

You can do this using the following syntax:
#if (${JHS.current.itemContainer.items.size()}>10)
maxColumns="2"
#else
maxColumns="1"
#end
Steven Davelaar,
Jheadstart Team

How to get information of 'include file', 'table', 'function' from the prog

Hi all.
I wanna know which 'include file', 'table', 'function' is used in the program.
Firstly, I prepared user interface for entering the name of program.
Secondarly,
I made the way to confirm whether the program is exising or not by using TADIR.
And I must use CROSS for getting information of function.
But at the same time, I will use 'RS_GET_ALL_INCLUDES', 'RS_GET_TABLE_REFERENCES' for getting information of include file or table.
After that, I have to report by using ALV.
Then, I will use both of string getting from function by using above function and internal table getting from CROSS.
How do I put together in INTERNAL TABLE.

hi,
look F1 to abap command <b>scan</b> and <b>read report</b>
A.

How to get Information Template fields to Standard Purchase order Document.

Hi Guy's
I Created Information Templates to capture extra information to suit our business needs. But i dont know how to get populate those information into Standard Purchase order docuemnt. After Some research I found that we have to customize the PO_STANDARD_XSLFO.xsl. But i did not get how to get those information.
If any one know knows or has done this type of customization let me know asap
Thanks in advance
Thanks & Regards
Palakondaiah.U

Hi,
I resolved this as following :
Since, i needed the Manufacturer Serial no. to be fetched in custom field at item level ( Enhanced via EEWB the item ) , the moment there is a product available in the sales doc header field.
I wrote badi implementation for definition : CRM_ORDERADM_I_BADI and utilized method : CRM_ORDERADM_I_PRODUCT_DETERM . This method's signature if you check makes me available the header, item guids along with the product available in the field even before i save the sales document. There i fetch the serial number of product from custom table and then poulate the serial no. field in customer_i extension as follows:
LS_CUSTOMER_I_COM-ZZCUSTOMER_I0803 = LV_MFR_SLNO.
LS_CUSTOMER_I_COM-REF_GUID    = IV_ITEM.
LS_CUSTOMER_I_COM-REF_HANDLE = '0000000000'.
LS_CUSTOMER_I_COM-MODE        = 'A'.
APPEND LS_CUSTOMER_I_COM TO LT_CUSTOMER_I_COM.
LS_FIELD_NAME_CUSTAB-FIELDNAME = 'ZZCUSTOMER_I0803'.
APPEND LS_FIELD_NAME_CUSTAB TO LT_FIELD_NAME_CUSTAB.
CALL FUNCTION 'CRM_CUSTOMER_I_MAINTAIN_OW'
    EXPORTING
      IS_CUSTOMER_I_COM    = LS_CUSTOMER_I_COM
*        IV_EXTERNAL_CALL     = 'X'
    CHANGING
      CT_INPUT_FIELD_NAMES = LT_FIELD_NAME_CUSTAB
    EXCEPTIONS
      ITEM_CHANGE_ERROR    = 1
      ITEM_CREATE_ERROR    = 2
      ERROR_OCCURRED       = 3
      OTHERS               = 4.

How to get the values from table SKB1 R/3 to SRM

Hi Gurus,
My requirement is to get all the values from the table SKB1 to SRM (i.e. in to an internal table) for doing some validation(G/L account XXXXXX requires an assignment to a CO objectXXXXXX.)
Like wise I have many tables for doing validation in SRM
Help me how to get this, suggest me any Function module with sample code.
OR
Any Standard FM which will give all the values of the fields in the table SKB1 when I pass the key fields G/L account & company code alone so that I can improve the performance.
Suggest me.
Regards
Paul

Hi,
You can use the FM 's META_READ_TABLE Or RFC_READ_TABLE
Which SRM / Backend system version are you using ?
Are you taking care of the Importing paramater - DELIMITER in this case.. ??*
See related links ->
Re: Retrieving data from R/3 into SRM
Re: Product Search TIME lag
Else you can just call the remote enabled FM "BAPI_GL_ACC_GETDETAIL" from SRM.
BR,
Disha.
Do reward points for useufl answers.

How to get information regarding WF table

Similar Messages

Maybe you are looking for