How to get Interleaving switched off?

Hi everyone,
My first time here, I have been a happy BT customer for a long time!
I mainly use my internet for Online Games so I have never been too worried about speed, only the latency, which has got a lot worse! 
My ADSL is throwing up pings of 50-70ms, which is a far cry from my old 20ms I once had at my old flat, and still a lot worse than the 30ms I got when I first moved in here!
I understand it could make my line less stable (although never had any problems with stability of the line). Can someone tell me what I need to do to get Interleaving removed? Also if there is anything technical I need to provide, perhaps some helpful person here can advise me how to get the information (e.g. if data is needed from the router (standard Homehub))
thanks in advanced

Hopefully this is right,
ADSL Line Status
Connection information
Line state:
Connected
Connection time:
3 days, 02:25:27
Downstream:
15,559 Kbps
Upstream:
1,188 Kbps
  ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
3.4 dB / 6.0 dB
Line attenuation (Down/Up):
34.0 dB / 18.5 dB
Output power (Down/Up):
0.0 dBm / 12.8 dBm
FEC Events (Down/Up):
94399110 / 0
CRC Events (Down/Up):
306 / 109
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
4647 / 72
Error Seconds (Local/Remote):
0 / 100

Similar Messages

  • Device get Automatically switched off and unable to turn on ...

    Hi experts,
    I wish u happy new year to everyone..
    I am facing a critical issue in my bb torch 9860,device get automatically switched off and unable to turn on the device by switching the power button .after doing hard reset it turns on ....iam missing calls .please help me how to trouble shoot it

    It's obviously a software issue so I suggest jumping right to an OS reload.  Battery pulls are always a good place to start but after that you should reload the OS.
    To do this, plug your phone in to your PC and open BlackBerry Desktop Software.  Click Device at the top of the software then Restore.  Choose the most recent restore point and load it.
    Let us know if that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion and found out it was not compatible with my HP printer (HP photosmart C5580) so I called Apple and asked how to get Mountain Lion off and Snow Leopard back on.  The Tech told me to

    I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion.  Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine.  Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer.  I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs.  Also the computer keeps freezing up when it is in the sleep mode, etc.
    When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it.  Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.

    Go to the  menu/About This Mac - what OS version shows there?
    Do a backup, preferably 2 separate ones on 2 separate drives.
    Revert to a Previous OS X
    Revert to Snow Leopard
    If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

  • Possible to get interleaving turned off?

    Hi, is it possible to get my interleaving turned off because as a gamer, the ping is too high. I don't mind the bandwidth loss.
    Thanks
    Josh

    http://community.bt.com/t5/BB-in-Home/how-to-turn-off-interleaving/td-p/74375
    the search facility is very good
    [email protected]
    http://community.bt.com/t5/Forum-Guidance-Ideas/Top-Tip-4-How-to-use-Search-in-the-community/m-p/675...
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • How to get ALL photos off iPhone and into iMac?

    I hope I can describe this clearly.
    I have close to 1000 photos on my iPhone 5s, all in different albums.  I want to get ALL of them off the iPhone and backed up into my iMac so I don't lose them when I upgrade (which has happened before.) The albums I seem to have the biggest problem with are the ones that came over when I went from a PC to a Mac about 2 years ago and were in albums in my Kodak Easy Share.  I can't get iPhoto to recognize these photos/albums so I can move them from the iPhone. Honestly, I'm not even sure how I got them from where they originated into my iPhone. I'd thought I'd lost them so when they popped up on my iPhone I refused to even update my phone for a while, I was so afraid to lose them.
    I tried using Image Capture and it only recognized 176 photos on the iPhone.
    I went into settings on my iPhone, into camera and photos, and saw that iCloud Photo Library (Beta) was "OFF." I clicked "ON" and got the message "Photos synced from iTunes will be removed. Syncing photos via iTunes is not supported when include Photo Library is turned on.  833 photos will be removed."
    I hit cancel.
    If I connect my iPhone to my Mac, and check off "Sync Photos" it appears that it's going to put photo's in iPhoto on my computer on my phone, so that isn't what I want either.  I've tried Googling this, and searching on the Apple site and I can't find anything like this. Similar but not quite the same.
    I also read (I think) that the iCloud would delete my photos in 30 days so I'm not sure what the value of backing them up to the iCloud is.
    I've used Finder to search Kodak, Easy Share, Kodak Easy Share, in case these photos are somewhere else on the iMac that I'm not aware of, most likely due to user ignorance.
    My screen is cracked, I'm going to need to upgrade soon, and I don't want to lose valuable photos again. 
    Thank you!

    Thank you to all for this info. Discouraging, but finally I can stop banging my head on the desk trying to figure out what I'm doing wrong.
    I do believe that when I synced my iPhone at some point in the last 2 years, I pulled all the photos OUT of iPhoto and then it deleted them.  Which is most likely why the older Kodak photos that I am almost 100% certain were in iPhoto are now gone. How/when they ended up on my iPhone I don't know because I swear they suddenly appeared there a few weeks ago.
    Since the old PC is gone (accessible but wiped clean & restored to original factory settings) and Easy Share is no more, I will have to explore outside options to get those photos off the iPhone somewhere.  Online photo storage sites have been suggested.  Archaic as it is, I wish I'd just put them all on cd's.
    Using the info provided, I did SUCCESSFULLY get all 237 photos off of my iPhone 3.  (yes, I still have it.)  Now I know better and will never ever sync my photo's in iTunes again.
    Thank you all again!!
    ***Addendum: ALL answers helped, but apparently I can't indicate that.

  • How to get photo albums off of iphone 4s with itunes

    My computer has a virus so I hooked my iphone 4s to another computer with itunes. I need to get some photo albums off the iphone that I synced with the other computer but the only thing that comes up are the photo stream photos. My question is how can I get them off it is taking up space on icloud and I just don't want them anymore. please help.

    Please explain to me what kind of photos end up outside the sandbox. Photos taken or saved with the phone are in the Camera Roll. Other photos on the iPhone would be synced via iTunes from the computer. Those pictures are already on the computer and can be removed from the phone via another sync. Importing the photos with import utility on the computer, like a digital camera is how to get the pictures. I'm not sure what these other photos are that you are referring to, or where they are coming from.

  • How to get contact pictures off iPhone

    I saved a picture with most of my contacts on my iPhone. Now I'd like to get those pictures off of the iPhone and onto a computer. Can someone help?
    So you know, I took the contact pictures from directly within the contact editor. I've tried sync'ing to my computer, but I only get thumbnails on my computer when I want the whole picture (I'm going to transfer the pictures to another iPhone).
    Thanks for any help or suggestions.

    I have no clue, but don't think resolution is all that crucial.
    Even a low-res picture can help preserve an important memory. Or something that makes a good phone contact picture may likely also make a good avatar for flickr, twitter, etc, and it would not need to be full resolution for such purposes.
    Nothing taken with the iPhone is all that high-res anyhow. IIRC, pix assigned on the phone show up full-screen, so it's probably not as low-res as the teeny photo assigned on the desktop and transferred via sync.
    Incidentally, google turned up this method of retrieval, using the Mac:
    If you click "edit" on the contact's entry in Address Book and then double click inside their picture, it will appear as a somewhat bigger version, which you can copy with command-C. But it's a far cry from full-resolution.
    http://forums.macnn.com/103/ipod-iphone-and-apple-tv/341591/iphone-contact-photo s-how-to-extract/
    I can't test it, though, as I don't sync contacts, and really have no clue whether the iPhone sync contact pictures to Outlook on Windows, which I assume the OP uses.

  • HT1414 My iPhone5 got a problem of getting automatically switched off and then automatically switched on. First i can see my screen getting faded to pinkinsh sort of color and then showing vertical grid lines. any suggestions?

    My iphone5 got a problem of getting switched off and on automatically. I can see my screen getting faded and then i can see the pink vertical lines before it switches off. After about 10 seconds it switches on again.

    Hi sumit1310,
    Thanks for visiting Apple Support Communities.
    I'd start with these troubleshooting steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Regards,
    Jeremy

  • How do get my contacts off my Nokia to gmail as I understand this is the only way to transfer them to an Iphone?

    How do I get my contacts off my Nokia onto gmail, as I understand this is the only way I can transfer these to Iphone?

    why don't you post this on the Nokia forum?

  • How to get an XMLBean off the jms queue

              Hello all,
              I think I can post an XMLBean to a JMS queue, but how to I read it off the JSM
              queue from within a MDB?
              When I cast the message from the onMessage(Message msg) event to my XMLBEan, I
              get a class cast exception.
              I want to post some form data to a MDB to kick off some processes.
              Here is the code that generates the XML bean and posts it to my jms :
              VCALENDARDocument vcaldoc = VCALENDARDocument.Factory.newInstance();
              VCALENDAR vcalendar = vcaldoc.addNewVCALENDAR();
              VEVENT vevent = vcalendar.addNewVevent();
              vcalendar.setProdid(form.getProdid());
              vcalendar.setVersion(form.getVersion());
              vevent.setDtstart(form.getDtstart());
              vevent.setDtend(form.getDtend());
              vevent.setSummary(form.getSummary());
              vevent.setOrganizer(form.getOrganizer());
              appointmentCtrl.sendAppointmentRequest(vcalendar, "12345");
              Here the code in the JMS Control:
              public interface AppointmentCtrl extends JMSControl,com.bea.control.ControlExtension
              * @jc:jms-property key="accountIdentifier" value="{accountID}"
              * @jc:jms-property key="transactionType" value="NOT SUPPORTED"
              public void sendAppointmentRequest(VCALENDAR vcalendar, String accountID);
              static final long serialVersionUID = 1L;
              Here is how I am trying to read it off the queue in my MDB:
              public void onMessage(Message msg)
              VCALENDAR vcalendar = (VCALENDAR)msg;
              System.out.println("Message received");
              System.out.println(vcalendar.getProdid());
              Here the error that i get:
              <Apr 10, 2004 2:02:16 AM CDT> <Warning> <EJB> <BEA-010065> <MessageDrivenBean
              th
              rew an Exception in onMessage(). The exception was:
              java.lang.ClassCastException.
              java.lang.ClassCastException
              at mdb.AppointmentEJB.onMessage(AppointmentEJB.java:24)
              at weblogic.ejb20.internal.MDListener.execute(MDListener.java:382)
              at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.
              java:316)
              at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:281)
              at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2596)
              at weblogic.jms.client.JMSSession.execute(JMSSession.java:2516)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
              >
              <Apr 10, 2004 2:02:16 AM CDT> <Warning> <EJB> <BEA-010065> <MessageDrivenBean
              th
              rew an Exception in onMessage(). The exception was:
              java.lang.ClassCastException.
              java.lang.ClassCastException
              at mdb.AppointmentEJB.onMessage(AppointmentEJB.java:24)
              at weblogic.ejb20.internal.MDListener.execute(MDListener.java:382)
              at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.
              java:316)
              at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:281)
              at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2596)
              at weblogic.jms.client.JMSSession.execute(JMSSession.java:2516)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
              >
              Any ideas what it should look like?
              Thanks,
              Marc
              

    Hi trevenator, 
    If you are having issues with an iPod touch directing you to connect to iTunes, you may find the following article helpful:
    If you can't update or restore your iPhone, iPad, or iPod touch
    Regards,
    - Brenden

  • Does anyone know how to get the headphones off my ringer. I have no headphones attached but my phone only rings through the headphone outlet? Thanks?

    Anybody know how to get my phone from ringing through the head set outlet? There are no headphones attached to the phone and when I try to adjust volume it comes up ringer(headphones). Any help would be great!

    I just had this problen after a rain storm and read to take a deep ( or several) deep breaths in from the headphone jack to dry it out.  This was the only thing that worked for me!  Read of sveral otheres doing this as well.  It took several deep, long breaths in before it worked.

  • Xperia z1 Getting automatically switched off

    I purchase 10 days back Xperia Z1, the day one withing few hours itself the camera does'nt open, and reflects as application not find, It occurs couple of time, then i thought it is due to soft malfunction then i upgraded to Kitkar 4.4.4
    Now the same occurs today and suddenly the phone swithced off automatical stating due to high temperature, It happens more than 15 -20 times then switched on for some time but not entering into setting since it aske security password..???
    Again it got swithced off...
    It totaly disappointed 30 k product gives statrted to mal function from day 1 and further detroited in 10 days....
    I was using sony protext since 2011 beleived on sony I bought this now this is the fate....
    Can I get any solution from the Sony Xperia team...
    Awating with a great hope...

    safe mode
    http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
    on safe mode check if the phone gets that hot, also are you constantly syncing and/or streaming music, videos, playing video games, etc?
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Ridiculous! Cannot get interleaving turned off.

    Hello all
    I have been forced to register here out of sheer frustration and a final hope of actually getting something done. I have been calling the call centre in India since the 8th of April asking for Interleaving to be turned off on my connection and for me to be back on fastpath. I have been on fastpath for the last two years and didn't ask for interleaving to be turned back on!
    As I said I have been trying to get fastpath enabled since teh 8th of April and I am now going insane. I have called a total of six times now, And six times I have been promised it will be dealt with. I have spoken to 2 supervisors, the last of which didn't even have the decency to end the call with me adn put one of her underlings on to tell me my request was going to be dealt with.
    I have tried to complain and all I get is a promise that it will be done within 48 hours, it's now over 800 hours and I am still waiting. I am certain I am just being lied to when I ring now.
    Can someone please help? I have been told I can speak to someone English at the call centres but all the people I speak to seem reluctant to even put me through to a supervisor.Let alone get me a native |English speaker.
    Can it really be that difficult for a communications company to communicate with itself and actually get something done for the customer?
    Two years ago I called BT to get my connection switched to fastpath and it was done in 48 hours, what on earth is happening BT?

    If you are not an avid online gamer then you will be better with the interleaving turned on it will give you a more stable connection if you want it turned back to fast then use this link and ask the mods to get it changed back http://bt.custhelp.com/app/contact_email/c/4951
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • How to get Networking Switch Port Configuration (I guess SNMP4j will help)

    Greetings :)
    We have extreme Summit 450e switches installed in our organization. approximately 2000 desktops are connected to these switches.
    Now, I want to make a utility to get info from these switches, for example, which IP, MAC etc is running on a particular switch port. I want to extract these kind of info from all switches and export it into a database.
    Any help, how to start this work.
    Thanks...

    > Any help, how to start this work.
    First research what programmable interfaces it supports.  That includes any management API including SNMP, TCP and HTTP.
    And then from that figure out what you want to do with it.
    After you do both of the above then you start looking to java to program the solution.

  • How to get downloaded pictures off my 4s

    I ahve an Iphone 4S. For some reason it likes to save pictures that I look at on Facebook. I cannot delete them. Does anyone know how I can get these off my phone?

    I have no clue, but don't think resolution is all that crucial.
    Even a low-res picture can help preserve an important memory. Or something that makes a good phone contact picture may likely also make a good avatar for flickr, twitter, etc, and it would not need to be full resolution for such purposes.
    Nothing taken with the iPhone is all that high-res anyhow. IIRC, pix assigned on the phone show up full-screen, so it's probably not as low-res as the teeny photo assigned on the desktop and transferred via sync.
    Incidentally, google turned up this method of retrieval, using the Mac:
    If you click "edit" on the contact's entry in Address Book and then double click inside their picture, it will appear as a somewhat bigger version, which you can copy with command-C. But it's a far cry from full-resolution.
    http://forums.macnn.com/103/ipod-iphone-and-apple-tv/341591/iphone-contact-photo s-how-to-extract/
    I can't test it, though, as I don't sync contacts, and really have no clue whether the iPhone sync contact pictures to Outlook on Windows, which I assume the OP uses.

Maybe you are looking for

  • My iTunes Match songs no longer show up in Songs, Albums or Artists after updating iTunes

    I updated iTunes today on my 2nd computer (PC) and now when I go to Songs, Artists or Albums I only see what music files i have saved on this computer.  I no longer see the songs that I have through iTunes Match.  The only way I can see and play (str

  • LOCKS IN TABLE

    Hi If there is a table level lock what should we do to realease the lock on the table. Thanks

  • Linking the Invoice with PDF image of invoice already archived

    Hi All, I have a requirement to link my Incoming Invoice with Image of Invoice which is archived in another server. Can someone suggest how to achieve this. P.S: The invoice is created through an IDOC hence we are planning to have archive ID and Docu

  • At the time of implimentation of SAP BW In jenaral how many reports

    Hi all,     I am new to SAP BW in jenral at the implimentation time except Business content reports how many new reports we create plz any body help me regarding this... Thanks in the advance Regards, Kiran Kumar

  • How to start Rescue and Recovery?

    How do you start Rescue and Recovery? I used to just press the Lenovo Care button and it came up. But now... there is a Startup Interrupt Menu. When the computer already booted, it won't allow me to start the thing up. All it says is that changing it