How to get internet connection from Airport Express to a PC?

I recently bought an Airport Express to get internet connection from my new MAC COMPUTER TO ANOTHER PC which is located in another room. For unknown reason, I could not get the other PC to work. Any idea how to fix it so that I can get internet connection for my PC? Many thanks for your expert assistance.

Currently, the Airport Express (not the Airport Express Extreme router) is acting as a base station via Ethernet to a cable modem.
I guess that it would be correct to assume that your new Mac can connect wirelessly to the AirPort Express base station, and access the Internet that way.
I am not sure if my 41/2 year old HP(Hewlect Packard) PC - (with AMD Athlon 64 3400 processor) which I am unable to get internet connection now is Wi-Fi capable.
You said "Prior to using the new Airport Express,I was using the Linksys wireless G router and have a wireless adapter sitting on top of my PC.". The wireless adapter would be Wi-Fi certified (they normally are). Is it a USB adapter? Please post back with the exact model.
Question: do I still need to use the adapter or not? Or the new Airport Express is enough to send internet signal to the PC?
A Wi-Fi adapter would act as a wireless network card for a PC, and should communicate wirelessly with an AirPort Express base station without a problem (providing that the chosen security/encryption is supported on both sides). Since the wireless adapter apparently was OK (with the Linksys router), you should be able to continue using it. Any other (built-in) wireless capability ought to be externally visible at the PC as a PCI card with an antenna.
Does the (Windows?) PC operating system detect any wireless networks? Is your AirPort Express on this list (even if you cannot connect or access the Internet)?
Jan

Similar Messages

Problem with not getting Internet Connect on AirPort Express

Problem with not getting Internet Connect on AirPort Express (version7.6.4). Error says cannot get valid IP address. Have reset Siemens SpeedStream 4100 several time, even with tech support from the big "A" DSL provider. Plug MacBook Pro directly into modem and works fine. Unplugged AirPort, even reset it, still no luck. A bad Express?? or am not looking in the right place to make connection. Was working fine up until Sunday.

Connect the AirPort Express (AX) to the cable modem via Ethernet cable.
In configuring the AX using AirPort Utility:
Under Internet, set the connection to be Ethernet using DHCP.
Under Connection Sharing, set it to distribute a range of IP addresses.
Under AirPort>Wireless, set the Wireless Mode to Create a wireless network, and fill in the remaining settings in the same window. Until you get it working, you might want to set Wireless Security to None.

How to share Internet connection from Leopard to iPhone 3G?

Hi!
How do you share Internet connection from Leopard to iPhone 3G?
So far I've managed to create a network and I joined my iPhone to the network. But when I turn on Internet Sharing from Leopard, iPhone's Safari won't use the connection. It either starts to use EDGE/3G or says that it isn't connected to the Internet...
What went wrong?

I have managed to get it work, but only when I completely turn my desktop computer's firewall off. To do this, select the Security icon in System Preferences, then click the Firewall tab. Next, select the 'Allow all incoming connections' option. I wish there was a way to configure individual ports so that I didn't have to leave my firewall wide open, but I haven't figured out how to do that so far.

How to share internet connection from notebook to mobile phone with micro usb cord in Debian based OS? (reverse tethering)

I want to share internet connection from notebook to my mobile phone (Keon) with micro usb cord (because I don't have wifi). I found in Firefox OS (version: Boot2Gecko 1.1.1.0-prerelease) Settings only the possibility to share internet from mobile phone to PC. I use a Debian based OS: Knoppix. I tried to accomplish this with Networking Manager and I did a new wired connection via my phone with "Shared to other computers" IPv4 Settings and with FE:...:02 (usb0) MAC address. But on my phone there is not internet although the connecton between my notebook and phone is estableshed.

Hi Pimpo,
Thank you for posting your question. I was trying to reproduce your the Shared network, and I would love to know what kind of network you used to connect. This is not possible as of yet and I will file a bug being able to do this, but to make sure I have the right steps on the bug can you confirm the set up of the shared network please?
Also this is currently not possible because the software does not know how to send network traffic over usb, assuming you do not have the ability to turn the computer into a wifi hot spot, which I would recommend instead...

How to share internet connection from cable modem through built-in airport on imac?

I have a cable modem with ethernet going into imac. How can I share the internet connection using the iMacs built in airport with other computers that have airport cards?
I would love to put an ethernet router between the imac and the modem and share the internet connection using the iMacs built in airport with other computers that have airport cards as well.
Thanks!

The setup I had working is what I have connected to the internet now. A cable modem with one ethernet jack that plugs into the iMac. The airport from the iMac broadcast to my G5 with an airport card in it and received the internet connection. The PC received it the same way from the iMac but to a Netgear wireless adapter.
I messed things up recently adding a wired 4 port ethernet router between the iMac and the modem, so that the modem ethernet plugged into the router, and from the router, plugged into the iMac which then could receive the internet but no more airport connections to my other machines. Haven't been able to get it working since.

Can't get wireless signal from Airport Express

I recently bought an Airport Extreme and Airport Express. The base station is in my office which is separate from my house so I bought an antenna from Macwireless.com. I'm able to play iTunes thru the Express perfectly but there's no wireless signal coming from the Express to connect to the internet. Does anyone have any idea what I can do to fix this?
After reading some other posts I found that my old wireless system wasn't acting up at all. It was Mac OS X 10.4.10. causing the disconnections to the internet. Great. Just great.

I'm able to play iTunes thru the Express perfectly but there's no wireless signal coming from the Express to connect to the internet. Does anyone have any idea what I can do to fix this?
If you have the Express and Extreme in a single Network there will be only one available network name to join. In that single wireless network the Express can be set up to extend range of network by using WDS, or simply as a wireless client that can print or use iTunes. If you check the Airport Utility help files it will give full documentation on how to set up either type of wireless network.

Sharing an internet connection with Airport express and Time Capsule

Hi, I have been happily using a cable modem and a Time Capsule for my internet connection and wireless network. We recently added solar panels to our roof and the system needs to be connected to the internet so it can be monitored remotely. Calling Comcast is an exercise in frustration, and the solar people don't seem to know exactly how to do it, so I'm trying this.
We bought an Airport Express, thinking if it is connected with an ethernet cable to the solar system, it could somehow share the internet connection with the Time Capsule, or they could talk to each other. When I plug in the Airport Express, the only set-up option seems to be to set up a new network, which I don't think I want to do. Can anyone tell me how to set this up? Thank you!

Hi, Under Water.
You should configure the Express to "Join a wireless network" or to "Extend a wireless network". (Either one will work.)
Connect your computer to your Express via Ethernet and open AirPort Utility. Press "Manual Setup" and authenticate if necessary.
Go to the "Base Station" tab. Give the Express a name and password.
Go to the "Wireless" tab. Set the Wireless mode to "Join a wireless network" or "Extend a wireless network." Enter the name of the wireless network created by your Time Capsule (or select it from the list). Check the box that says "Allow Ethernet clients" (if you're joining) or "Allow Wireless Clients" (if you're extending).
Provide the appropriate security mode and password for the Time Capsule's network.
Press "Update" and allow your Express to restart.
Then you can plug the solar system into the Express's Ethernet port.

Lose internet connection with airport express

I have a powerpc imac G5 and intel powerbook with built in airport and using an airport express for both. I've since moved in with my fiance and she has a PC. We can all connect to my airport express without any problems initially. Every once in a while though I'll lose my connection in all 3 computers. The green light on the express is lit at all times. If I unplug the express and replug and wait for it to reset, all is fine again... for a while... then some days later it'll go out again. Any ideas why this is happening.
Thanks in advance for any help.
J.

Hana, welcome to the discussions!
First thing to check is how much competition you have for the airways in your area.
Download iStumbler, www.istumbler.net to get a look at the other wireless networks that may be causing interference with your system.
Pay close attention to the channels that the other networks are occupying. Then using AirPort Utility - Manual Setup - Wireless Tab, change your channel to a setting that is as far away as possible from the other channels in use.
If you are in a dense area of apartments, etc., it may be quite difficult to find a clear channel. And, most modern routers allow the user to keep their network hidden, so you may not be able to even see some networks. Unfortunately, there are no shortcuts here.
You might also try "interference robustness" under "Options" on the Wireless Tab in AirPort Utility - Manual Setup. There may be a slight speed penalty for using this setting, but if it prevents interruptions, that will be good compromise.
Post back on your progress.

Trying to share internet connection using Airport Express

I have an internet connection via a Verizon Wireless broadband card in the Express Card slot in my MacBookPro. I share this connection to my iMac via Airport and I have an Airport Express card connected to a printer & stereo. However, when I establish the Airport internet connection (internet sharing in System prefrences) it establishes a wireless network in the MacBook (I think) as evedinced by the Airport signal (fan) logo changing to a vertical arrow. This precludes connecting to the Airport Express (the Airport Express network is not shown in the Airport pull down menu, only the MacBook network). My question is: can I somehow share the internet connection using the Airport Express network???

ejagnut, Welcome to the discussion area!
Configure the AirPort Express (AX) to join the wireless network created by your MacBook Pro. The directions can be found in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

Lost internet connection to Airport express

My Netgear DSL modem/wireless router is able to connect to the internet and my Mac book pro airport is able to communicate with it. I have Airport express base unit connected to the router by ethernet cable and I was using faster N wifi to communicate with laptop. I use G wifi to communicate with Iphones. Few days ago I lost ability to connect to the internet with Airport express. Laptop is connected to it showing all bars and during troubleshooting all part of the setup screen show green dots except IPS and further down rest is red. I can connect through Netgear using its G wifi. Troubleshooting so far did not work. I reset pasword, created new network, reset airport extreme to factory setting but I am getting error that there is nothing connected to Ethernet port. I tried 3 diferent cables, each one of 3 netgear ports and there is no change. Is it a defective ethernet port on the airport express? Is there a test I can confirm that? Thanks for your input in advance.

Suggest that you temporarily turn off wireless on your laptop and connect it to one of the ethernet ports on the Netgear router to see if you can get an internet connection that way. If you can, check the other ethernet ports on the Netgear to makes sure they are all operating.
However, if you can't get an internet connection with the laptop connected directly to the Netgear, then the probable trouble spot points to the ethernet ports/switch on the Netgear.
If everything checks OK in the first paragraph, then you know that the Netgear is functioning correctly and you can look elsewhere for the issue.
Try a factory default reset on the AirPort Express again as follows:
Power it down for a few minutes
Hold in the reset button and keep holding the button in as you plug the AirPort Express back in to power
Release the reset button after 10 seconds
After reconfiguration of the AirPort Express, if you continue to receive the "no ethernet" message after a few tries, then it's likely that there has been an internal failure within the AirPort Express. This can sometimes occur on AirPort Express devices that are a couple of years old or older.
If that's the case, I'm afraid the AirPort Express will need to be replaced.

Can I use Ethernet for Internet connection and Airport express for printer

How / can I use Ethernet for Internet connection and use an airport express to set up wifi for printer and Apple TV?
Macbook Pro. OS X 10.9.4

I've never tried it, so I don't know what the results will be.
However, you can move Ethernet to the top of the Services list in Network System Prefs which will cause it to be the Internet source. There is a command in the gear menu to set the Service order. However, after thinking about it, if there isn't an internet connection via Wi-Fi, it might automatically drop down to the Ethernet connection.
Then, you can set up your Wi-Fi so that it doesn't connect to the Internet, as Linc stated. How to do that would be dependent on the Router.

Intermittent internet connection via airport express

I've got a MacBook Core Duo and a MacBook Pro Core 2 Duo...both with airport express. My internet connection is via a DLink DI-624 to Motorola cable modem. The DI-624 is setup with WPA security...which has been working fine for my windows laptop and PDA.
I've been getting random problems with web surfing even though the airport express icon shows full bars. During those problem times, safari reports no internet connection.
I've noticed that I can sometimes bring internet connection back by turning off the airport (via the icon at the top) and then turning it back on. Don't like this, as wireless connection should just work...and this doesn't always fix it.
Suggestions?
Thank you.
MacBook Core Duo and MacBook Core 2 Duo Mac OS X (10.4.8)

raxx wrote:
I am currently using the 802.11n Airport Express (firmware 7.4.2) as a wireless router to serve 2 802.11g Windows PCs. However, our internet connection seems to have slowed significantly recently.
When I connect directly via a LAN cable, my download speed is 25+ mbps. However, the download speed slows to only 6-7 mbps when connected wirelessly via the Airport Express. The speed remains this slow even when only one computer is connected wirelessly.
In general an Ethernet connection will be faster than a Wi-Fi connection.
In AirPort Utility for Mac (which ought to be similar for the same program for Windows) you can enter "manual setup" mode, then select the "Advanced" panel, click the "Logs and Statistics" button, then click the "Wireless Clients" tab. If you can do that, what values do you see in the lower part of the window for "SIgnal" and "Noise"?

AT&T USBConnect 881aircard as internet connection with airport express

I have a usb air card(internet connection, almost same as a usb modem) I want to know can I use the usb connection an an Airport Express or Airport Extreme to connect my usb air card? So i can have more than one computer use the air card(internet connection) at a time.
Thanks
Scubachris

remisbowman, Welcome to the discussion area!
Neither the AirPort Express (AX) nor the AirPort Extreme base station (AEBS) support any type of USB modems, USB networking card, nor USB networking in general.
It won't work.

Loss of internet connection thru airport express

Hi
Every time I download software updates I lose my internet connection.
I then have great difficulty in re-connecting. I have tried using the lock on the network connections to keep the settings , but for some reason the lock is unlocked after a period of time even though I have not requested it. I suspect that there may be a conflict between the keychain access and the airport express but I cannot prove this for sure. Does anyone have any suggestions ?
Fred

Lost connections, slow connections and difficulty connecting can all be due to a noisey phone line. I have a dedicated modem line that was giving me all of these problems. I connected a phone to it and listened, the the noise was terrible. Turns out the phone line was rubbing against a tree and shorting out a half mile away. Now it's fixed, and works great.
15" Flat Panel iMac 800 MHz Mac OS X (10.4.5) airport express

How to get current connection from ejb container

We have to execute sql statement directly to the database and will use for this issue to connection establish between the ejb container and the database.
How to get the corresponding object ?

thanks

How to get internet connection from Airport Express to a PC?

Similar Messages

Maybe you are looking for