How to get internet for powerbook g3

I have a powerbook g3 with documents on it that I want to email. It has internet explorer 4.6 and netscape
communicator, but neither works with my current modem fron ATT. Any ideas?

Walter,
Would it be correct to assume that the PowerBook is connected by an Ethernet cable to one of the Ethernet (LAN) ports in the 3801HGV gateway? Have you tried the same type of connection with a newer Mac or with a PC?
Are the Mac OS 9.1 TCP/IP settings OK?
http://support.apple.com/kb/TA20782
Unfortunately, the Mac OS 9.x web browser options are limited. You may want to test iCab and Classilla, since these possibly work better with modern web pages.
http://www.icab.de/
http://www.floodgap.com/software/classilla/
If necessary, you could download the browsers on a more modern computer, and then transfer the files to the PowerBook. Depending upon the exact PowerBook G3 model (original or Series), such a transfer can take place on a CD-R, a CompactFlash card in a PC Card adapter for CF, through a network, or on a USB flash memory stick. Keep the downloaded files unaltered until on the PowerBook; use StuffIt Expander for decoding/decompression once they have arrived there.
Jan

Similar Messages

How to get internet for my Apple devices?

Hiii,I am concerning about having a router and modem for my internet at home.I have got TPG as a ISP but didnt want any of their modems,I am looking for something from Apple because most of my devices Apple's.I am not really good at this,can anyone help?

An Apple AirPort is a router, so you're covered there. The only other device required is a modem, and there are many of them from which to choose. Does your ISP supply one, and if so, can you determine its model number?
Modems can be purchased for $30. You first need to ask your ISP what equipment they plan to supply, if anything. Modems are commonly supplied for $0, to be returned if and when you cancel their service. Some ISPs want to supply a modem but charge you a rental fee. Whatever that fee is, it's not worth it.

I Need Your Help.How Do I Get Internet For My IPod Touch 4,So I Can Have Music To Listen To.Thank You,donna Spinner

I Need Your Help With My IPod Touch 4 I Would Like To Have Music To Listen To&I Would Like To Know How To Get Internet For My Apple IPod Touch 4 So I Can Have Music To Listen To.Thank You,Donna Spinner

Connect to your home wi-fi network.
Click Support at the top of this page, then click Manuals.
Select the ipod touch manual.

How to get internet on the go for iPad 2, is it possible? Thanks for ur help in advance...

How to get internet on the go for iPad 2, is it possible? Thanks for ur help in advance...

If you don't have cellular on your iPad, then you will need a public Wi-Fi access.

How to get internet settins for i phone4

how to get internet settins for i phone4

An Apple AirPort is a router, so you're covered there. The only other device required is a modem, and there are many of them from which to choose. Does your ISP supply one, and if so, can you determine its model number?
Modems can be purchased for $30. You first need to ask your ISP what equipment they plan to supply, if anything. Modems are commonly supplied for $0, to be returned if and when you cancel their service. Some ISPs want to supply a modem but charge you a rental fee. Whatever that fee is, it's not worth it.

How to get internet on a blackberry storm 9350 unlocked?

i have a blackberry storm 9350 n i want to ask how to get internet on a blackberry storm 9350 unlocked?

n your gonna need to post somemore detail n say like what carrier you intend to get your internet from?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to get Text for nodes in Tree Structure

Hi Friends,
How to get Text for nodes in Tree Structure
REPORT YFIIN_REP_TREE_STRUCTURE no standard page heading.
                   I N I T I A L I Z A T I O N
INITIALIZATION.
AUTHORITY-CHECK OBJECT 'ZPRCHK_NEW' :
                  ID 'YFIINICD' FIELD SY-TCODE.
IF SY-SUBRC NE 0.
    MESSAGE I000(yFI02) with SY-TCODE .
    LEAVE PROGRAM.
ENDIF.
class screen_init definition create private.
Public section
public section.
    class-methods init_screen.
    methods constructor.
Private section
private section.
    data: container1 type ref to cl_gui_custom_container,
          container2 type ref to cl_gui_custom_container,
          tree type ref to cl_gui_simple_tree.
    methods: fill_tree.
endclass.
Class for Handling Events
class screen_handler definition.
Public section
public section.
    methods: constructor importing container
               type ref to cl_gui_custom_container,
             handle_node_double_click
               for event node_double_click
               of cl_gui_simple_tree
               importing node_key .
Private section
private section.
endclass.
*&                        Classes implementation
class screen_init implementation.
*&                        Method INIT_SCREEN
method init_screen.
    data screen type ref to screen_init.
    create object screen.
endmethod.
*&                        Method CONSTRUCTOR
method constructor.
    data: events type cntl_simple_events,
          event like line of events,
          event_handler type ref to screen_handler.
    create object: container1 exporting container_name = 'CUSTOM_1',
                   tree exporting parent = container1
                     node_selection_mode =
            cl_gui_simple_tree=>node_sel_mode_multiple.
    create object: container2 exporting container_name = 'CUSTOM_2',
    event_handler exporting container = container2.
event-eventid = cl_gui_simple_tree=>eventid_node_double_click.
    event-appl_event = ' '.   "system event, does not trigger PAI
    append event to events.
    call method tree->set_registered_events
         exporting events = events.
    set handler event_handler->handle_node_double_click for tree.
     call method: me->fill_tree.
endmethod.
*&                        Method FILL_TREE
method fill_tree.
    data: node_table type table of abdemonode,
          node type abdemonode.
types:    begin of tree_node,
          folder(50) type c,
          tcode(60) type c,
          tcode1(60) type c,
          tcode2(60) type c,
          text(60) type c,
          text1(60) type c,
          text2(60) type c,
          end of tree_node.
data: wa_tree_node type tree_node,
            t_tree_node type table of tree_node.
wa_tree_node-folder = text-001.
wa_tree_node-tcode = text-002.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-003.
wa_tree_node-text1 = 'GR/IR aging'.
wa_tree_node-tcode2 = text-004.
wa_tree_node-text2 = 'Bank Balance'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
wa_tree_node-folder = text-005.
wa_tree_node-tcode = text-006.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-007.
wa_tree_node-text1 = 'Creditors ageing'.
wa_tree_node-tcode2 = text-008.
wa_tree_node-text2 = 'Creditors ageing'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
wa_tree_node-folder = text-009.
wa_tree_node-tcode = text-010.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-011.
wa_tree_node-text1 = 'Creditors ageing'.
wa_tree_node-tcode2 = text-012.
wa_tree_node-text2 = 'Creditors ageing'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
node-hidden = ' '.                 " All nodes are visible,
    node-disabled = ' '.               " selectable,
    node-isfolder = 'X'.                                    " a folder,
    node-expander = ' '.               " have no '+' sign forexpansion.
    loop at t_tree_node into wa_tree_node.
      at new folder.
        node-isfolder = 'X'.                      " a folder,
        node-node_key = wa_tree_node-folder.
               clear node-relatkey.
        clear node-relatship.
        node-text = wa_tree_node-folder.
        node-n_image =   ' '.
        node-exp_image = ' '.
        append node to node_table.
      endat.
     at new tcode .
        node-isfolder = ' '.                          " a folder,
        node-n_image =   '@CS@'.       "AV is the internal code
        node-exp_image = '@CS@'.       "for an airplane icon
        node-node_key = wa_tree_node-tcode.
         node-text = wa_tree_node-text .
                 node-relatkey = wa_tree_node-folder.
        node-relatship = cl_gui_simple_tree=>relat_last_child.
      endat.
      append node to node_table.
    at new tcode1 .
        node-isfolder = ' '.                          " a folder,
        node-n_image =   '@CS@'.       "AV is the internal code
        node-exp_image = '@CS@'.       "for an airplane icon
        node-node_key = wa_tree_node-tcode1.
                 node-relatkey = wa_tree_node-folder.
        node-relatship = cl_gui_simple_tree=>relat_last_child.
          node-text = wa_tree_node-text1.
     endat.
      append node to node_table.
       at new tcode2 .
        node-isfolder = ' '.                          " a folder,
        node-n_image =   '@CS@'.       "AV is the internal code
        node-exp_image = '@CS@'.       "for an airplane icon
        node-node_key = wa_tree_node-tcode2.
                 node-relatkey = wa_tree_node-folder.
        node-relatship = cl_gui_simple_tree=>relat_last_child.
        node-text = wa_tree_node-text2.
     endat.
      append node to node_table.
    endloop.
    call method tree->add_nodes
         exporting table_structure_name = 'ABDEMONODE'
                   node_table = node_table.
endmethod.
endclass.
*&                        Class implementation
class screen_handler implementation.
*&                        Method CONSTRUCTOR
method constructor.
   create object: HTML_VIEWER exporting PARENT = CONTAINER,
                  LIST_VIEWER exporting I_PARENT = CONTAINER.
endmethod.
*&                 Method HANDLE_NODE_DOUBLE_CLICK
method handle_node_double_click.
case node_key(12).
when 'Creditors'.
submit YFIIN_REP_CREADITORS_AGING via selection-screen and return.
when 'Vendor'.
submit YFIIN_REP_VENDOR_OUTSTANDING via selection-screen and return.
when 'Customer'.
submit YFIIN_REP_CUSTOMER_OUTSTANDING via selection-screen and
return.
when 'GR/IR'.
submit YFIIN_REP_GRIR_AGING via selection-screen and return.
when 'Acc_Doc_List'.
submit YFIIN_REP_ACCOUNTINGDOCLIST via selection-screen and return.
when 'Bank Bal'.
submit YFIIN_REP_BANKBALANCE via selection-screen and return.
when 'Ven_Cus_Dtl'.
submit YFIIN_REP_VENDORCUST_DETAIL via selection-screen and return.
when 'G/L_Open_Bal'.
submit YFIIN_REP_OPENINGBALANCE via selection-screen and return.
when 'Usr_Authn'.
submit YFIIN_REP_USERAUTHRIZATION via selection-screen and return.
endcase.
endmethod.
endclass.
Program execution ************************************************
load-of-program.
call screen 9001.
at selection-screen.
Dialog Modules PBO
*&      Module STATUS_9001 OUTPUT
      text
module status_9001 output.
set pf-status 'SCREEN_9001'.
set titlebar 'TIT_9001'.
call method screen_init=>init_screen.
endmodule.                 " STATUS_9001 OUTPUT
Dialog Modules PAI
*&      Module USER_COMMAND_9001 INPUT
      text
module user_command_9001 input.
endmodule.                 " USER_COMMAND_9001 INPUT
*&      Module exit_9001 INPUT
      text
module exit_9001 input.
case sy-ucomm.
when 'EXIT'.
set screen 0.
endcase.
endmodule.
        exit_9001 INPUT

you can read the table node_table with nody key value which imports when docubble click the the tree node (Double clifk event).
Regards,
Gopi .
Reward points if helpfull.

How to get classification for a given material and material type in MM

Hello Friends,
One of my developer colleagues is struggling to find out : how to get classification for a given material and material type in MM?
He is looking for probable table and table fields to Select from.
I would appreciate seriously any help in this regard.
~Yours Sincerely

Hi
Below given the flow and table details for a given class and class type.
- Table KLAH --> This contains the "Internal class no" [ for the given Class & Class type ]
- Table KSML --> This contains the " internal character numbers " [ nothing but characteristics attached to the class ] , which can be fetched with the above fetched internal class no
- Table AUSP --> This table contains the objects ( material ) attached to the internal characters of that class
- Table CABNT --> This table contains the "Description" for the internal character numbers.
- award points if this is ok

How to get LASTDAY for each and every month between given dates..

Hi Friend,
I have a doubt,How to get LASTDAY for each and every month between given dates..
for ex:
My Input will be look like this
from date = 12-01-2011
To date = 14-04-2011
And i need an output like
31-01-2011
28-02-2011
31-03-2011
is there any way to achieve through sql query in oracle
Advance thanks for all helping friends

Here's a 8i solution :
select add_months(
         trunc(
           to_date('12-01-2011','DD-MM-YYYY')
         ,'MM'
       , rownum ) - 1 as results
from all_objects
where rownum <= ( months_between( trunc(to_date('14-04-2011','DD-MM-YYYY'), 'MM'),
                                  trunc(to_date('12-01-2011','DD-MM-YYYY'), 'MM') ) );
The above two query is worked in oracle 11GActually the first query I posted is not correct.
It should work better with
months_between(
   trunc(to_date(:dt_end,'DD-MM-YYYY'),'MM'),
   trunc(to_date(:dt_start,'DD-MM-YYYY'),'MM')
)Edited by: odie_63 on 12 janv. 2011 13:53
Edited by: odie_63 on 12 janv. 2011 14:11

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

Re: how to get apps for iphone 3g 4.2.1

Re: how to get apps for iphone 3g 4.2.1 all apps support higher version help....
Sep 24, 2013 6:34 AM (in response to Rajmit)
I still have an old 3G which I use mostly as a ipod/radio. By accident I found you can overide the i-tunes block.
1. Select Apps in Apps store icon on the phone.
2. Choose App to download
3. At "Instal" button press it QUICKLY in blocks of 3 presses, keep doing this until it overides the i-tune warning, then if there were legacy versions for os 4.2.1 it says something like "this app is for os 5 or above", but gives you a choice to download an older version. Select this.
Sometimes it says the Apps is for newer hardware, requiring motion sensors, front camera's etc.. just got to accept these ones don't work on legacy hardware.
4. Download does not work for all Apps, esp. newer ones written after os 4.21 or if the developer doesn't have the vintage apps archived- e.g. Instagram downloads, but won't run (wants to update), or WSJ and Barrons stalls and goes through a download loop.
I am not making this up, as I bought this old 3g unit on e-bay, after a complete factory reset I now have:
- Tune-in, FB, Pandora,Skype, Twitter, Bloomberg, MSNBC, Forbes, Marketwatch, Viber, amongst a host of other news apps like LATimes.
Some Apps will download ok, and then at activation says its too old and no longer supported e.g Whats App.
Otherwise, good luck. Tune-in, Pandora, Skype and Twitter is all I need to keep me happy with an old unit, even though I've got newer hardware. Never let anything die unnaturally.

I still have an old 3G which I use mostly as a ipod/radio. By accident I found you can overide the i-tunes block.
1. Select Apps in Apps store icon on the phone.
2. Choose App to download
3. At "Instal" button press it QUICKLY in blocks of 3 presses, keep doing this until it overides the i-tune warning, then if there were legacy versions for os 4.2.1 it says something like "this app is for os 5 or above", but gives you a choice to download an older version. Select this.
Sometimes it says the Apps is for newer hardware, requiring motion sensors, front camera's etc.. just got to accept these ones don't work on legacy hardware.
4. Download does not work for all Apps, esp. newer ones written after os 4.21 or if the developer doesn't have the vintage apps archived- e.g. Instagram downloads, but won't run (wants to update), or WSJ and Barrons stalls and goes through a download loop.
I am not making this up, as I bought this old 3g unit on e-bay, after a complete factory reset I now have:
- Tune-in, FB, Pandora,Skype, Twitter, Bloomberg, MSNBC, Forbes, Marketwatch, Viber, amongst a host of other news apps like LATimes.
Some Apps will download ok, and then at activation says its too old and no longer supported e.g Whats App.
Otherwise, good luck. Tune-in, Pandora, Skype and Twitter is all I need to keep me happy with an old unit, even though I've got newer hardware. Never let anything die unnaturally.

Reg: How to Configure internet for solaris 10 in x86 32 bit

Hi,
I am new to Sun Solaris can any one help me detailed step of how to configure internet for standalone pc. Thanks in Advance
Thanx
MA

OK, the classical way:
Open a terminal.
Type
ifconfig -a
ifconfig -a plumb
ifconfig -a
Note the differences, it will plumb ALL available interfaces this way. So, now you can see, which device is your network card.
Then perform a
ifconfig <interface> unplumb
for all the newly interfaces (aka those, that were new in the last ifconfig -a output).
Then, the simple way:
cd /etc
vi hostname.<interface-driver-name>0 (example: hostname.rge0, the driver would be rge, the instance is 0, and rge0 would have been displayed as an available interface in the last ifconfig command). Add the name of the host into this file.
Then
vi /etc/inet/hosts
and add the pair of IP-address and hostname.
If needed:
vi /etc/inet/netmasks
if you have a sub-divided network, and you need a differenbt subnet mask...
Then:
vi /etc/defaultrouter
and add the name or ip-adress of the gateway... (name only, if you have that name also in the /etc/inet/hosts file!)
Also:
vi /etc/nodename
and add the name of your host into that file, so that the system knows, who it is... ;-)
And: For the DNS you can then add the infos into:
/etc/resolv.conf
For example:
nameserver 192.168.2.1
or some such...
Then, as the last but one step:
ls /etc/nsswitch.*
and:
cd /etc
cp nsswitch.<what you need> nsswitch.conf (should be .files here!)
And the reboot... ;-)
HTH!
Matthias
P.S.: There might be some GUI, but I'm an old-timer, so I prefer the command-line version of things...

[JS][CS3]how to get refrence for source file

Hi All
I am new and learning javascript Gradually Could any one help on this as i do have a code for load style but don't know how to get refrence for "source file" and "targetDoc"
targetDoc.importStyles(charImport, sourceFile, clashPolicy);
targetDoc.importStyles(paraImport, sourceFile, clashPolicy);
Can any one figure it out
Many Thanks

I'm not sure what you are trying to achieve, could you please elaborate?
Do you want to load all the styles from one document into all 100 documents, or do you want all the styles from the 100 documents into 1 document or what is the goal?
The following will let you choose a folder of files, open each of the files in it and import the styles from source document. It is not a complete script, make sure to test and modify before running on anything else than test files :-)
var MyFolderWithFiles = Folder.selectDialog ("Choose a folder");
var sourceFile = File.openDialog("Choose the styles source");
var myFiles = MyFolderWithFiles.getFiles("*.indd");
for(i = 0; i < myFiles.length; i++) {
    theFile = myFiles[i];
    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;
    var targetDoc = app.open(theFile, true);
    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.INTERACT_WITH_ALL;
    targetDoc.importStyles(ImportFormat.CHARACTER_STYLES_FORMAT, sourceFile, GlobalClashResolutionStrategy.LOAD_ALL_WITH_OVERWRITE);
    targetDoc.importStyles(ImportFormat.PARAGRAPH_STYLES_FORMAT, sourceFile, GlobalClashResolutionStrategy.LOAD_ALL_WITH_OVERWRITE);
    targetDoc.close(SaveOptions.YES);
Thomas B. Nielsen
http://www.lund-co.dk

I have canceled my account same day and joining because the convert PDF to word did not convert correctly how to get credit for cancelled membership

I have canceled my account same day and joining because the convert PDF to word did not convert correctly how to get credit for cancelled membership

You need to contact Adobe Customer Support :
They will check and assist you. (Live Chat)
Contact Customer Care

How to get appstore for mac os x 10.4.11?

how to get appstore for mac os x 10.4.11?

Go to Apple menu -> About this Mac. If you have a G3, G4, or G5 processor you can't access the App Store at all.
If you have an Intel Mac, updating to 10.6.6 is described here:
https://discussions.apple.com/docs/DOC-2455

How to get internet for powerbook g3

Similar Messages

Maybe you are looking for