How to get into advance bios settings tab ?

How can i change the advance settings,power management etc in bios as it is not availeble in BIOS menu. I'm using Insyde bios v3.5.
Model-G560
OS-Windows 8 64bit pro

Hi Levaj,
I’m sorry to hear that the issue persists even after performing the “System Restore” in the computer; the only available option is to perform OSRI (Operating System Re-Install) which will confirm if the issue is Hardware related. To perform OSRI click on OKR (One Key Recovery) button in the computer, below is the link to download the User Guide for the steps to perform OSRI and refer page no. 2 to locate the OKR button and page no. 25 for the steps to perform OKR.
NOTE: Please backup the data in the computer before performing OSRI, as the data will be completely erased.
Lenovo G560 User Guide
If the issue persists even after performing “System Recovery” in the computer, I would Strongly Suggest Calling Technical Support for Assistance. Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Hope this helps!!!
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Satellite 2540xcdt: How to get into the BIOS

Hi there,
I've just bought one of the above computers and would like to know how to get into the bios before it boots up to the OS,
anybody out there have any ideas?
Many thanks
F

Hi
Pres ESC button just after starting the unit and keep it down for a short time.
Bye

How do you get into the BIOS on a Satellite 320 CDS.

Hi my name is steve I was wondering how do you get into the BIOS on a satellite 320 CDS. As this is my first format on a lap top. Done plenty on desktop computers just never laptops. As some fool tried to do it before me and distroyed it. Now the only thing that happens is after the toshiba logo disappears this message comes up, INVALID SYSTEM DISK, REPLACE THE DISK AND THEN PRESS ANY KEY. It use to run Windows 98 and it worked great for how old it is. Was hoping to put XP on it but its only got a small hard drive (4099mb). So will have to put 98 back on it till I get a bigger hard drive.Only need it to teach my daughter how to respect a laptop. I mainly want to get into the BIOS for format. Any instruction on how to get into the BIOS would be great, as I'm good from there. Thank you in advance for your help.

Hi,
I don't know the exact method for the Satellite 320 CDS.
But most of the Toshiba notebooks use one of the following methods.
If you see a message while booting "Press F2 to enter setup", do it and you get into BIOS.
Or you have to press ESC while booting, then press F1 when prompted to and you are in the BIOS.
Bye

I cannot get into my BIOS using the F10 Key

I need to get into my BIOS settings to be able to boot from a USB drive and the F10 key does not work.

Hi,
Try the ESC key after power on then Computer setup (f10). If that doesn't work then review this article.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How do I get into the BIOS on my HP Envy running Windows 8.1 to enable Hyper-V

How do I get into the BIOS on my HP Envy running Windows 8.1 to enable Hyper-V
This question was solved.
View Solution.

Rob, welcome to the forum.
During boot you should continually tap the Esc key to enter the BIOS. I am not certain that you will find Hyper-V as an option in the BIOS. Most of HP's BIOS'es are kept very simple with only the necessary settings.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How to get into BIOS in Windows 8

my question is this will the same fan control software that was on windows seven 64 bit lenova work with windows 8 and 8.1 just wondering if i have to uninstall before i upgrade or will it be compatable with 8 and 8.1 upgrade hope someone can steer me in the right direction here it would be appreciated-thanks

Hi,
follow the links below:
http://forums.lenovo.com/t5/Windows-8-and-8-1-Knowledge-Base/How-to-get-into-BIOS-in-Windows-8/ta-p/...
http://support.lenovo.com/en_US/detail.page?DocID=HT076607
win8 should be installed on the big HDD.
If you have enough computing skills Win8.1 Update could be installed on the small SSD using the new feature - WimBOOT.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Sooo... How do I get into the bios setup?

Now before you get out the pitchforks and torches, I know I'm supposed to continually press or hold a certain Function key when I first power on a computer.
My cousin left me his old Pavilion a410e. I figured I'd set it up for when family or friends needed to use a computer. Well... when I got everything together and started it up, I got an error. "CPU Fan Failure". (Now you see why my cousin gave the computer to me.) I popped open the case and saw the fan spin up fine when powering the computer. The fan's power connecter and the heatsink/fan are all properly in place. I tried to google for a solution, and came across suggestions to turn off the fan check through bios. The computer came into my hands with the 3.06 bios, and while in that bios menu, the cpu fan options were greyed out (unchangeable). I thought maybe a bios update would change that, so I went ahead and downloaded/installed the 3.10 bios update from HP. It installed fine (I guess), but now I can't get into the bios menu, no matter which key I press. Windows boots up fine, so long as I bypass the CPU fan failure warning by pressing F2. I'd really like to kill that warning. How do I get into the bios menu now, guys?

ComputerzEast wrote:
You may be able to go back to an older bios revision. . . some computers let you and others do not. I don't have experience with this particular model to know for sure.
I wouldn't mind trying. I'm not sure where I'd find older bios updates, tho. HP doesn't seem to archive their bioses on the site.
20YearsHPUser wrote:
In windows, what bios version does it report? -- you said you were able to boot into windows.
I'm...not sure what you mean, but if you're asking me which bios version I have installed currently, it's: 3.10. For Pavilion a410e.
nazcar4u wrote:
Ihis may sound stuipid but have u tried hitting the ESC key to enter BIOS?
ESC takes me to the "Boot Menu", which works, oddly... The boot screen says to press F1 to get into the bios setup, but it just won't work.

How to get into BIOS of Sat P200D? What is correct temp for CPU/VGA load?

I tried everything, pressing ESC after power-up,F1, ESC/F1, F2....i cannot get into the bios.
What is the proper procedure to get into the BIOS? I used the latest BIOS 1.70 from Toshiba homepage, i remember i didn't have this problem with the older bios.
Furthermore, what are correct temps for the CPU under extreme load as well as VGA testing with OCCT/Furmark or everest?
If i run OCCT (extreme CPU stress test) i am getting some extreme numbers up to 95 degree on the CPU...
Thanks!

*SOLVED!!!*
It was indeed the case that any standard VGA resolution (like bios screen and bootup screen) was not displayed on the laptop!
Thats why i only saw a black screen!
I plugged an external monitor on it, and i see i am actually in BIOS.
So i went into the BIOS (using the other monitor) and changed the the setting "Analog + External", and now it works and i also have the toshiba logo back and everything

RocketRaid 2322, cant get into card bios or change settings

I have a RocketRaid 2322 with an 8bay eSata enclosure. I setup the raid arrays through the OS as I couldnt get into the bios. I now have failed drives and need to get into the cards bios but it seems the Mac does not recognize the keyboard until its past the card initializing. Is there any way to get into the card bios?

http://www.amug.org/amug-web/html/amug/reviews/articles/highpoint/2322/

DEP, M55, Advanced Bios Settings

Thinkcentre M55, Windows XP
Does the M55 use Hardware-enforced DEP?
For some reason DEP can't be disabled or modified from Windows XPs GUI or boot.ini switches.
Boots back to it's default setting of On and OptIn (default configuration) Only Windows system components and services have DEP applied
Also looking for some detailed documentation or articles related to M55's Bios and the advanced bios settings.

Hello Sirald66,
I understand you want to disable wake-on the keyboard, is that correct? I will assist you with this inquiry.
There is not an advanced bios settings available for your current system bios, a possible future upgrade might make it available.
If I understand you correctly on the keyboard issue, you can make those changes in the device manager.
1.       Open device manager, if you are unsure how to get there have a look at this link.
2.       Scroll down to keyboard section.
3.       Click on arrow to the left of keyboard to expand section.
4.       Right click on keyboard, and then go properties.
5.       At the top of the next window go to the power management tab, and the option should be there to uncheck.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Alter a BAPI Result Table, how to get into the display "loop" ?

Hello all,
i have a problem regarding the result rows of a RFC/BAPI Call.
There are three views, let's say 1,2,3. In View 1, i call a BAPI, and display the results in a table in View 2. I added a button in each row, which calls View 3 and displays some details concerning the selected row.
I now want to store a flag for each row, that has been displayed in this way.
In View 3 i store the key value of the displayed row in an own value node in the context.
When i go back from View 3 to View 2, i want to see that flag (in an extra column) in every row, that has been selected in this session.
So i do not know, how to alter a single row in the BAPI result table, how to get into the "loop" that is used by WD to display the table.
already tried a supply function, but i was not able to alter single rows.
Any suggestions/tips or perhaps code fragments of working supply functions ?
Thank you !

Hello,
I'm not sure whether I understood your problem correctly, but I will try to give an answer.
The easiest way I see is to copy the RFC Results to a Component Controller Context structure with an additional Flag field. You can use WDCopyService for copying.
Then on the event of selecting you set your flag as appropriate for you (e.g. if you want to use an image as flag you set the Image path) on the current element of your table. Then display View 3.
On going back View 2 should show now the new flag values...
The trick is to copy the values (as at Time structures can not be expandend with new fields) and set the Flag on the onSelect event.
Hope this helps,
Frank

How to get into my iPhone5 if I have forgotten my password, How to get into my iPhone5 if I have forgotten my password

How to get into my phone if I forgot my password

LOST PASSCODE
You should be able to remove the passcode by restoring the device.
Connect the device to the computer with which you normally sync and open iTunes.
Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes", below.
Right-click the device in the left column and select Back up.
When the backup is complete, select Restore.
When finished, restore from your most recent backup.
Otherwise read this
If that doesn’t work you will need to perform a factory restore to remove it. Or read:
Enter Wrong passcode
http://support.apple.com/kb/ht1212

My iPhone was stolen. How do I retrieve the pictures etc that were on imt. I know they must be in the iCloud but I don't know how to get into it from my iPad. Also, I would like to try to locate the phone ...how do I do that from my iPad?

My iPhone was stolen. How do I retrieve the pictures etc that were on imt. I know they must be in the iCloud but I don't know how to get into it from my iPad. Also, I would like to try to locate the phone ...how do I do that from my iPad?

These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
 Cheers, Tom

Quick doubt.. from cursor vairable how to get into page vairable

Hello
i am creating an apex page where i have 2 regions. From the Top region stores all fields entered into the bottom region
Text fields like first name and last name and address fields are in region 2(bottom).After region 2, i have a add person button.
Once i click add person, that person will get into top i.e region 1.
Now, Region 1 got person1 first name ,last name
person2, first name,last name
etc..
I am not able to display like p1_first_name,p1_laast_name as the list is not stable..it is growing and not showing the person who already got saved..I can retrieve them from DB using a cursor..But from cursor vairable how to get into page vairable..
appreciate ur help..
kp

Your explanation is not good enough. You have to make a better description of your problem or create an example at apex.oracle.com.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

How to get into desktop screen at once when client come into RDP session?

How to get into desktop screen at once when client come into RDP session?
When users login into terminal server I would like they see own desktop and open web page of corp portal.
How to do that?

Hi
Hope below links will help
http://blog.cloud-client.info/2012/10/03/tip-configure-a-keyboard-shortcut-to-minimize-fullscreen-citrix-or-microsoft-rds-sessions-for-a-linux-based-igel-os/
Also there are some Remote Desktop Services shortcut keys
http://msdn.microsoft.com/en-us/library/aa383500%28v=vs.85%29.aspx
Regards,
Rajesh J S

How to get into advance bios settings tab ?

Similar Messages

Maybe you are looking for