How to get into BIOS in Windows 8

my question is this will the same fan control software that was on windows seven 64 bit lenova work with windows 8 and 8.1 just wondering if i have to uninstall before i upgrade or will it be compatable with 8 and 8.1 upgrade hope someone can steer me in the right direction here it would be appreciated-thanks

Hi,
follow the links below:
http://forums.lenovo.com/t5/Windows-8-and-8-1-Knowledge-Base/How-to-get-into-BIOS-in-Windows-8/ta-p/...
http://support.lenovo.com/en_US/detail.page?DocID=HT076607
win8 should be installed on the big HDD.
If you have enough computing skills Win8.1 Update could be installed on the small SSD using the new feature - WimBOOT.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Similar Messages

How to get into Publisher Main Window

Hi Experts,
To strat MDM publisher, I have done as followings:
1) start up MDM publisher gui
2) in "Connect to MDM Repository" window, choose one repository which I can access from MDM Data Manager.
3) enter my user and password
4) click OK to continue
Afterwards, I can see that a pop up window named "Select MDM Layout Server" is also showing up. There are list of the PC names for me to choose to connect. As MDM Layout Server has been installed on my local, I just choose my pc name from the drop down list and confirm it with OK. But it asks me again and again even I have already chosen. If I click Cancel. Publisher Window has been aborted.
Can you tell how to get into Publisher Main window ?
Thanks very much for your help.
Kind regards,
Wei Dona

Hi Jitesh,
Thanks for your reply.
I have checked from the Services that the status of the Layout Server is in "Started" status with Startup Type in "Automatic".
Could you let me know how to check the version of both Publisher and Layout Server ?
Regards,
Wei Dona

Dv9000 series - how to get into BIOS

How can I get into BIOS and how can I re-dedicate graphics memory-use there? (Maybe my other's post was too special...)

Oh, THAT's interesting to learn that chances are high, they either changed the whole mobo, or the system wouldn't run stable with damaged graphics memory...(An ugly one: would it be worth exchanging the mobo and do all that counterfeiting data just for the value of the old mobo???) Here's what I found so far: (I used "SIW System Information for Windows"-tool to get the following data, among a lot of other)- Serial-# matches my serial-# as per the original packaging, paperwork and bottom of the machine- Model 103C_5335KV (another way to denote the model KP964EA/dv9787eg?)- NVIDIA 8600M GS with (only) 256MB DDR2 64bits- dedicated video memory 239MB (251199488)- dedicated system memory 0MB- shared system memory 1279MB (1341353984)- Mobo is a Quanta 30CB 79.2E (no serial-# found/supplied by SIW!) I will check the hardware again by "reading out" data with Fn+Esc and/or CPUZ and GPUZ and report back (as said, I think the info there said KP964EA already - just to make sure)... Just for the guessing or "narrowing the problem down":IF my system was running on 256MB before already (and hp advertised wrong data for my rig) - so no change there - what else might cause my games running roughly now and be a reason for the dropped performance-index in windows?Possible that the graphics chip is able to perform with 256MB only and I would need another version of the 8600M GS which IS able to make use of the 512? (Guess no, as the above info TELLS me that there is only 256MB - and no 512MB - available, right?)CAN that be related to some software or driver?Would/might setting up windows anew (or changing from Vista to 7 for that matter) might bring me back to speed? Anyway, let me tell you that I VERY much appreciate your help on this - I am kind of lost on my own here, and I will try whatever I can to get back my "old" great-performing machine.

How to get into BIOS of Sat P200D? What is correct temp for CPU/VGA load?

I tried everything, pressing ESC after power-up,F1, ESC/F1, F2....i cannot get into the bios.
What is the proper procedure to get into the BIOS? I used the latest BIOS 1.70 from Toshiba homepage, i remember i didn't have this problem with the older bios.
Furthermore, what are correct temps for the CPU under extreme load as well as VGA testing with OCCT/Furmark or everest?
If i run OCCT (extreme CPU stress test) i am getting some extreme numbers up to 95 degree on the CPU...
Thanks!

*SOLVED!!!*
It was indeed the case that any standard VGA resolution (like bios screen and bootup screen) was not displayed on the laptop!
Thats why i only saw a black screen!
I plugged an external monitor on it, and i see i am actually in BIOS.
So i went into the BIOS (using the other monitor) and changed the the setting "Analog + External", and now it works and i also have the toshiba logo back and everything

How to get into BIOS menu of Qosmio G30

How do I come in my BIOS (Qosmio G30) esc? F2? F1?
Thanks.... Derk (Ducht)

Press and hold the ESC key as soon as you turn it on, this will get you into the BIOS.
Hope this helps
Chuck

Satellite 2540xcdt: How to get into the BIOS

Hi there,
I've just bought one of the above computers and would like to know how to get into the bios before it boots up to the OS,
anybody out there have any ideas?
Many thanks
F

Hi
Pres ESC button just after starting the unit and keep it down for a short time.
Bye

Cannot get into BIOS, No POST screen appear!

Here I am, stuck at the boot.
I am struggling for hours now but cannot make my Satellite L850-Y5310 to boot into BIOS. I have Ubuntu Linux installed on It and last time I remembered I was into bios I was experimenting with some new options like "Rapid Boot" or Fast boot (Not sure) but certainly that is the reason I am now unable to see any option to press 'any' key to get into bios or to select the boot device. As soon as I press the power button It takes me to the GRUB screen and Ubuntu boot up. That is really Fast as the Fastboot feature is expected to do but now it is nothing more than a trouble for me.
Anyone have any idea how can I access the BIOS now ? Just dont tell me get back to windows, I know there is an SSD containing the installation package and it will install a fresh copy of windows 7 for me but I just dont wanna do that.
I want to get back to the BIOS anyhow, or at least be able to see the POST screen so that I can press the respective key to enter the BIOS or Boot device selection menu.
Any help is highly appreciated.

When you have Fast Boot selected, you get into Setup by holding down the F2 key while starting the machine. While you are in the BIOS, you can change the Boot back to Normal. If you were using Windows 7, I could give you another way to change Fast Boot but I don't know whether it would work using Ubuntu. You can try by typing HWSetup in the Start/Search box, hit Enter and select the Boot Setting tab where you can make the change.
C.B.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Z68A-GD55 can't get into BIOS anymore

Just built new Z68 computer gradually over 3 days. Then loaded applications and everything worked great for 2 days. Decided it was done and time to change boot priority in BIOS. Couldn’t get into BIOS. Got splash screen but no further.
Found forum message recommending CMOS reset. Tried button, jumper, remove battery methods. Still can’t get into BIOS. Get BIOS Prompt ("...press DELETE"), but nothing after that except flashing cursor top left of screen. Back to barebones; same result. Screen messages before BIOS prompt: 98, 99, A3. Will not boot MS DOS (Win98 version) from USB drive (would before). I’d appreciate any suggestions. Thx.
Key build steps:
• Ran Memtest barebones 48 hrs.
• Added SSD (ACHI) and Installed Windows 7 Pro. SSD was new.
• Added, formatted HDD
• Enabled multi-monitor in BIOS; added Radeon HD6870; 2 monitors on Radeon, none on internal; installed Radeon drivers.
• Enabled Virtu in BIOS, d-mode; Installed Virtu
Not overclocked.

After replacing the PSU with a Corsair TX650M (650w, 3.3v30A, 5v30A, 12V54A), the barebones config could access the BIOS. Installed everything except boot SSD; still OK.
Before letting the computer boot back into Win7, I connected two old 19" LCD monitors (Microtek C997SD). For setup and testing, I had been using a 24" widescreen. But Win7 had never seen anything but the Microteks, which I intend to use with this computer. Tried to enter BIOS to verify settings were still correct for SSD. Got splash screen -- regular BIOS background, but no Icons (Green Power, Utilities, Overclocking, etc.). Computer locks: PS/2 keyboard (incl. Ctrl-Alt-Del) and USB mouse, do nothing.
Connected widescreen, verified BIOS OK. Shut down and reconnected Microteks, attempted boot into Win7, and all was OK. I just can't use a Microtek to access BIOS.
I hope MSI recognizes how valuable the volunteers here are. Your advice solved the problem at least a couple of days earlier than I would have done on my own. Thank you.

Can't get into BIOS mode

** i also put this question in O.P. topic, because i think that was the wrong one**
1. Type of computer - HP ENVY dv7-7250nr
2. opporating system- windows 8 64bit
I recently got this computer. It's amazing the only thing that could use a change is the keyboard. I got this as a gaming PC but the function keys can only be accesed when pressing FN. In most computer games the f# keys are your shortcuts. When i go to press mine i have windows changed and the control panal pops up.
So i was looking around and they say you can go into BIOS mode and turn off the hotkeys. Only issue is i can't get into BIOS mode.
I would really appreciate some help on this, i don't want to go out and key a whole-nother keyboard.
Thank you in advance.

Princess.
Turn on the laptop then tap f10.
That should get you into the BIOS.
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Getting into BIOS

I have a ms-6178 motherboard in a Tiny PC. I have no documentation on how to get into my BIOS.
I have tried; Delete, Escape, and F1-F12 already so I am thinking it may be a combonation of keys.
Any help would be great.
Thanks,
Wil

Hi Wil; Well I have Searched MSI's Whole product Site, and I'm Soryy to say, that it looks as though you have an OEM MSI Board in your System , as 6178 is NOT a Valid MSI Production Motherboard.
This Means that MSI Manufactured your Board for an OEM Company such as Hewlet Packard, Packard Bell, Compaq, or even Sony. So your best Bet is to Contact the OEM.
Another wat that I Can Tell that your Board MUST be in an OEM PC, is the Fact that that the Del. or the F1 through F-4 Keys do NOT allow you access to the BIOS, as All MB Manufacturers use Either Award or AMI BIOSes and Use a Single Keystoke for BIOS Entry.
Now the Way that we could Further Help you is if you Provide us with More Information, ie. (If it is Indeed an OEM PC) the Brand Name, what CPU does this MB Support, and also the Type of memory supported, Because sometimes you can find with Luck someone Else that has your Same PC. and they just dont know that they have the Same MB as you .........Let us know................Sean REILLY875

Alter a BAPI Result Table, how to get into the display "loop" ?

Hello all,
i have a problem regarding the result rows of a RFC/BAPI Call.
There are three views, let's say 1,2,3. In View 1, i call a BAPI, and display the results in a table in View 2. I added a button in each row, which calls View 3 and displays some details concerning the selected row.
I now want to store a flag for each row, that has been displayed in this way.
In View 3 i store the key value of the displayed row in an own value node in the context.
When i go back from View 3 to View 2, i want to see that flag (in an extra column) in every row, that has been selected in this session.
So i do not know, how to alter a single row in the BAPI result table, how to get into the "loop" that is used by WD to display the table.
already tried a supply function, but i was not able to alter single rows.
Any suggestions/tips or perhaps code fragments of working supply functions ?
Thank you !

Hello,
I'm not sure whether I understood your problem correctly, but I will try to give an answer.
The easiest way I see is to copy the RFC Results to a Component Controller Context structure with an additional Flag field. You can use WDCopyService for copying.
Then on the event of selecting you set your flag as appropriate for you (e.g. if you want to use an image as flag you set the Image path) on the current element of your table. Then display View 3.
On going back View 2 should show now the new flag values...
The trick is to copy the values (as at Time structures can not be expandend with new fields) and set the Flag on the onSelect event.
Hope this helps,
Frank

How to get into my iPhone5 if I have forgotten my password, How to get into my iPhone5 if I have forgotten my password

How to get into my phone if I forgot my password

LOST PASSCODE
You should be able to remove the passcode by restoring the device.
Connect the device to the computer with which you normally sync and open iTunes.
Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes", below.
Right-click the device in the left column and select Back up.
When the backup is complete, select Restore.
When finished, restore from your most recent backup.
Otherwise read this
If that doesn’t work you will need to perform a factory restore to remove it. Or read:
Enter Wrong passcode
http://support.apple.com/kb/ht1212

My iPhone was stolen. How do I retrieve the pictures etc that were on imt. I know they must be in the iCloud but I don't know how to get into it from my iPad. Also, I would like to try to locate the phone ...how do I do that from my iPad?

My iPhone was stolen. How do I retrieve the pictures etc that were on imt. I know they must be in the iCloud but I don't know how to get into it from my iPad. Also, I would like to try to locate the phone ...how do I do that from my iPad?

These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
 Cheers, Tom

Quick doubt.. from cursor vairable how to get into page vairable

Hello
i am creating an apex page where i have 2 regions. From the Top region stores all fields entered into the bottom region
Text fields like first name and last name and address fields are in region 2(bottom).After region 2, i have a add person button.
Once i click add person, that person will get into top i.e region 1.
Now, Region 1 got person1 first name ,last name
person2, first name,last name
etc..
I am not able to display like p1_first_name,p1_laast_name as the list is not stable..it is growing and not showing the person who already got saved..I can retrieve them from DB using a cursor..But from cursor vairable how to get into page vairable..
appreciate ur help..
kp

Your explanation is not good enough. You have to make a better description of your problem or create an example at apex.oracle.com.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

How to get into desktop screen at once when client come into RDP session?

How to get into desktop screen at once when client come into RDP session?
When users login into terminal server I would like they see own desktop and open web page of corp portal.
How to do that?

Hi
Hope below links will help
http://blog.cloud-client.info/2012/10/03/tip-configure-a-keyboard-shortcut-to-minimize-fullscreen-citrix-or-microsoft-rds-sessions-for-a-linux-based-igel-os/
Also there are some Remote Desktop Services shortcut keys
http://msdn.microsoft.com/en-us/library/aa383500%28v=vs.85%29.aspx
Regards,
Rajesh J S

How to get into BIOS in Windows 8

Similar Messages

Maybe you are looking for