How to get Ipad out of the Dead Battery screen

Yestorday I got home and went on my ipad was to lazy to put it on charge so it went dead and came up with that black screen with the red battery so i started charging it with the wall charger and all it does is show that it is being charged for about 9 secounds than the screen will flash of and not come on again untill i press the home button or power button,Than it will just keep doing the same thing still in the dead battery screen, cant put it in DFU mode because it just flashes of power i can complete the procedure Only started Happening since IOS7
No computer recognizes it at all, Help Please

Try pressing the home button three times quickly.

Similar Messages

  • My ipod will only show the dead battery screen and wont taking a charge.

    my ipod will only show the dead battery screen and wont taking a charge on any of my sinc cords or my outlet charger. And I have checked that nothing is in the plug port blocking the electrodes. What do I do now?

    Put the device in DFU mode (google it) and restore via iTunes.

  • HT5137 Why is my ipad stuck in the low battery screen?

    Why is my ipad stuck in the low battery screen?
    Help!

    Are you sure the device is charging? 
    Try resetting the device.  Hold the sleep wake button and the home button at the same time for 10-15 seconds (until you see the Apple Logo, then release).

  • How to get ipad out of negitive mode

    Need help, how do i get ipad out of negitive mode?

    Try pressing the home button three times quickly.

  • Apple's iPad case - How to get iPad out of?!?

    As snug as the case is, once an iPad is in Apple's iPad case, I can't seem to get it out of the case! Is there a simple trick to getting the iPad out of Apple's case?

    Profinite wrote:
    As snug as the case is, once an iPad is in Apple's iPad case, I can't seem to get it out of the case! Is there a simple trick to getting the iPad out of Apple's case?
    First open the flap holding it in.
    Then, with the front cover open and away from you (iPad is face up and the right edge is toward you) pull the edge of the case that is facing you toward you about 1/4 inch until it drops over the edge of the iPad.
    Then, use both thumbs to push on the iPad while using the fingers of both hands to hold the edge.
    After it has moved about 1/2 inch release the edges, grab the outer edge with your off hand (left if you are right handed) using your left thumb and forefinger and use the thumb of the other hand to push the iPad out and away from you. Try to keep the thumb in the center of the iPad so it doesn't bind.
    After doing this a couple of times you will get to where you can remove even a tightly bound iPad in about three seconds.

  • Huge Problem: How to get Information out of the SAP System into MySQL?

    Hi all
    Im totally despaired... So im comming here, hoping to find ANY solution.
    I wrote a Program, which creates a internal Table wich some information from many DDIC-Tables. The internal Table is about 7 Columns, with only char fields.
    Also I have a MySQL Server (reached through the Internet), with a database on it, and a table, which looks 1:1 as my internal Table in ABAP does.
    Now I want to append the Data from the internal Table to the MySQL Table.
    Is there ANY chance of getting this done?
    and btw. can I append this Data with a secured connection?
    THX for help...
    greets
    Markus Voelker

    Think of Orchestrator as a "router", that will route information and workflows between SCOM, and [insert 3rd party product here].  Depending on your 3rd party product, there may be an "integration pack" for it that Orchestrator can use for out of the
    box tasks.
    So what's an integration pack?  Well - think of it like a management pack, but for Orchestrator.  SCOM does monitoring, but it doesn't know how to monitor something unless you install the relevant management pack.  The management pack contains
    all the rules/monitors for monitoring whatever it is you wish to monitor.
    Well, an integration pack is similar in concept, except it tells Orchestrator how to interface and integrate with whatever it is you're trying to perform tasks with. 
    For what you want to do, there is a SCOM integration pack.  This is a set of tasks that can get alerts and events out of Operations Manager (there are also tasks that can create and close alerts in Operations Manager). 
    From what I can imagine - you would want to get alerts out of SCOM when they happen (so you would use one of the SCOM orchestrator tasks to "get alert if status = new, and source = myapplication"), and then you can pass that alert to another task - such
    as write it to a CSV file or something.  You could then have another task that picks up that CSV file, and passes it to your application where it can be captured.  Or you could use the CSV to populate variables in a powershell script, and then powershell
    that information into your app.
    There are many ways you could do this, but I do believe that Orchestrator would be the better option. 
    http://www.dreamension.net

  • How to get event 'out of the class'

    I have been reading myself silly about this, I either don't get it or it is very difficult.
    What I want to do:
    1) setup
    2) show panel
    3) handle input in panel
    4) once valid
    5) "get out"
    6) display other panel.
    I can go all the way to 4.
    But I can't get "out" of the panel.
    All I can guess/understand is that I have to trigger an event that will be handled below/outside this panel.
    Has anybody some idea how to do this? Maybe a link to some example code?
    There is tons to read about event handling but the (only) part I understand is about events within classes just as all the examples are (One panel two buttons, two pictures etc)
    I guess the only option I might envision is dividing by zero and catching the error outside the panel.
    That would be bazooking a mosquito, but it also shows what I try to implement.
    I'd be so happy to understand this part of the 'java system' ...
    (please understand that I don't want 'cardlayout', I want to understand what I need to do)
    Much thanks for any help!

    Thank you for your suggestion.
    My problem is that I am (feel?) stuck within the panel.
    So to put it differently, I cannot build a child panel with a button (in the child) that will have the parent pane change color. This as my 'code focus' is within the child panel and I cannot 'activate' code outside it.
    I am totally confused now as to how java works.
    So I cannot write a parent pane with a child pane where the child tests for a name and if the name is correct the child will be removed and some code will put in another child pane with fi a picture.
    This seems so utterly basic to any programmers needs, but I cannot find one example - or I have gone blind looking for it. In my code if I want to read the input field I have to handle it within the child pane, if I want to change child panels I need to do that in the parents panel code. But I can't change the code focus. So the child needs to generate an event that the parents can act upon, but there are no examples while I actually expect tons of examples. So maybe I don't speak 'Java'.
    This meaning that I cannot write a stack of panes and remove them one by one using fi the escape key.
    I am just left clueless by Java.

  • How to get ipad out of recovery mode?

    how do I get my ipad OUT of recovery mode.  i don't want anything deleted.

    If you are already in recovery mode, then your data is already lost. Your only option is to restore through iTunes then reload your most recent backup which you say was some time ago. This is why you need to backup everything at least once a week. Then when problems arise, you haven't lost a lot of information.

  • My iphone 5 is stuck at the dead battery screen

    recently my iPhone has been randomly shutting off. it would charge very fast then die. using my iPhone regularly i cant go a day without it dying at least 2 times a day. today (4/17/15) it went from 59% to 1% skipping the 20%low battery screen and the 10% and just died. I went to plug it in and left it there and its been charging for about 2 or 3 hours and nothings happening. when i click any buttons it shows the dead or empty battery screen. so i don't think its completely gone but it wont turn on. if anyone can help or anything i would appreciate it. thank you.
              -Devan

    devanfromcleveland wrote:
    recently my iPhone has been randomly shutting off. it would charge very fast then die. using my iPhone regularly i cant go a day without it dying at least 2 times a day. today (4/17/15) it went from 59% to 1% skipping the 20%low battery screen and the 10% and just died. I went to plug it in and left it there and its been charging for about 2 or 3 hours and nothings happening. when i click any buttons it shows the dead or empty battery screen. so i don't think its completely gone but it wont turn on. if anyone can help or anything i would appreciate it. thank you.
              -Devan
    Check out this: iPhone 5 Battery Replacement Program - Apple Support

  • How to get iPad out of recovery mode without restore?

    My iPad randomly went into recover mode when I was updating to the latest ios software, 7.1.2. I had already downloaded the update, and this happened while it was installingthe update. I had not backed up for a long time now, and I am getting really scared that I will lose everything. Can anyone PLEASE help me by guiding me to get my iPad up and running again without losing my data. After all, I have done nothing wrong here.

    If you are already in recovery mode, then your data is already lost. Your only option is to restore through iTunes then reload your most recent backup which you say was some time ago. This is why you need to backup everything at least once a week. Then when problems arise, you haven't lost a lot of information.

  • How to get ME3400 out to the internet.

    Hi Guys,
    I've just started on my CCNA studies and I've got an ME3400 that my boss has given me to play around with.
    He would like me to update the software by connecting to a TFTP server but I can't seem to get it going.
    I've got port 1 hooked up to our LAN and set-up to pick up a DHCP address and its grabbing one.
    I've added the default gateway and set it to the ip that port 1 is picking up.
    what else am i doing wrong?

    Hi Guys,I've just started on my CCNA studies and I've got an ME3400 that my boss has given me to play around with. He would like me to update the software by connecting to a TFTP server but I can't seem to get it going.I've got port 1 hooked up to our LAN and set-up to pick up a DHCP address and its grabbing one.I've added the default gateway and set it to the ip that port 1 is picking up.what else am i doing wrong?
    Hi,
    In order to have internet access via ME3400 you need to have nat implemented in ME3400 for local lan address and if you want to upgarde the ios of ME 3400 check out the below link
    http://www.cisco.com/en/US/docs/switches/metro/me3400/software/release/12.2_35_se/release/notes/OL11487.html
    For natting check out the below link
    http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml
    Hope to Help !!
    Ganesh.H
    Remember to rate the helpful post

  • How to get water out of my iPhone 5 screen?

    I got caught in heavy rain and now there looks like there's water under my iPhone 5 screen. Now the touch screen doesn't actually work properly but the apps and stuff seem to be working fine. Is my phone ruined or will it just dry out and be okay? Can I get the water out?

    Get a bag of uncooked white rice. Put the phone in it and leave for a few days. The rice might absorb the moisture.

  • My 4gb SDHC flash mem card is stuck in DVD slot on my iMac 27". How to get it out?

    I misplaced my 4GB flash memory card (Canon camera) in the DVD slot (above the card slot) and it disappeared while I was trying to get it out. Naturally I inadvertently (spelled "stupidly") knocked it inside and could not figure out how to get it out. The dust rubber "shields" hide it and I've tried to find it with a toothpick and wedge it out, to no avail. Are there any ideas or suggestions others may have used to get it out (I know turning it on it side and shaking won't work). Why in the world did they design it like it is -- I've had it happen to me and others have also told me of their misadventures, but they also were able to gradually get it out. This time, it's in too deep. Can I ignore it and still use the CD/DVD slot without it blowing up?

    You might need to take to an Apple technician or apple dealer to let them take apart the iMac and remove the flash memory card. if you're very careful you might try a pair of needle nose pliers and a flashlight but it's easy to do damage to the DVD internal mechanical if you're not real careful.
    A good story to tell your grand kids maybe ;-)
    Good luck

  • How do i find out who the carrier is and can i get it unlocked to use in australia?

    Hi there,
    I got a iphone4 from my friend ewho brought it from someone from ebay in the states
    I am unable to use the phone and was told that the phone had been updated to a baseband that can not be unlocked
    and that I need to contact the carrier.
    How do I find out who the carrier is and is there anyway I can get it unlocked to be used in Australia?
    It has a grevey sim in it and well at this point in time its just being used as an ipod.
    Yes I know I should of got one from Australia but i thought it wouldnt be this hard to get it fixed to be able to use here.
    please help........
    thanx
    lana

    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    http://support.apple.com/kb/HT3743

  • Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive.

    Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c drive, or get the itune to open my old c drive when I log in.

    might be some help on one of these links.
    Windows - Change iPad default backup location
    http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
    Windows - Changing IPhone and iPad backup location
    http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
    Sync Your iOS Device with a New Computer Without Losing Data
    http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive
    https://discussions.apple.com/docs/DOC-3141
     Cheers, Tom

Maybe you are looking for