How to get ipad unlocked to all networks

iv bought a 1 genturaion ipad from someone on ebay it is on three network how can i get the ipad unlocked to all networks.

IPads normally are not carrier-locked, so yours should work with any carrier that offers a suitable data plan.
Regards.

Similar Messages

  • How can i get my iphone 4 unlocked to all networks

    i was wondering if there is any other way of getting my iphone unlocked to all networks as orange arnt helping?

    KT is correct! w/o the carriers co-operation with this, only savage hacking can get you free 
    That will open you up to bugs you don't want. These so called service providers to unlock phones are dangerous and many are just money pits for those who participate We will just have to wait for legilation or agreements from our device manufacturers and the carrier networks. (There are a fistful of carriers that do unlock i.e. Att&t)

  • How to get factory unlock for iphone 4s in india..iphone 4s is from  spain on orange network..

    how to get factory unlock for iphone 4s in india..iphone 4s is from  spain on orange network..

    Well, you've got a real mess on your hands with no easy solution. See, you're gonna have to go back to Spain to activate your phone on Orange's network, then request Orange to unlock it. You won't be able to do anything with that phone but use it as a paperweight until you do so. And no, Apple can't help you, nor can anyone here. Good luck.

  • My Iphone 4S 64G Unlocked to All Networks dosnt Work in UK

    Good Night.
    At about 5 months I bought a second hand iPhone 4S to someone who says you have received as a gift at Christmas to a family that live in the UK .. And as he had wanted to sell a 4S offered him, I ended up paying € 700 at the time and was very pleased because the equipment was found unlocked to all networks .. The point is that this time I came to the UK on business and the equipment does not get any type of mobile network here, not even with the card he used in Portugal .. I do not understand why .. Well, just by saying the name of the Operator of any type of card (SIM) to enter but not get any network ..
    I've probably said this Iphone is locked by IMEI in the UK, but would like to know your reviews and what can I do this there is anything that can be done ..
    Wait to get some help.

    Call AppleCare and give them the model and serial number of the iPhone and ask which cell provider it is locked to. Then call that cell carrier and find out what the procedure is to officially unlock it.

  • How to get the values of all elements and sub elements from  following xml

    how to get the values of all elements and sub elements from following xml...
    <?xml version="1.0" encoding="UTF-8" ?>
    <List_AML_Finacle xmlns="http://3i-infotech.com/Cust_AML_Finacle.xsd"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://3i-infotech.com/Cust_AML_Finacle.xsd List_AML_Finacle.xsd">
    <TransactionID>TransactionID</TransactionID>
    <Match>
    <Src_Matched_Field>Src_Matched_Field</Src_Matched_Field>
    <List_Matched_Field>
    <FSFM_Matches>
    <NUMBER>NUMBER</NUMBER>
    <TERROR>TERROR</TERROR>
    <TU>TU</TU>
    <NAMEU>NAMEU</NAMEU>
    <DESCRIPT>DESCRIPT</DESCRIPT>
    <KODCR>KODCR</KODCR>
    <KODCN>KODCN</KODCN>
    <AMR>AMR</AMR>
    <ADDRESS>ADDRESS</ADDRESS>
    <SD>SD</SD>
    <RG>RG</RG>
    <ND>ND</ND>
    <VD>VD</VD>
    <GR>GR</GR>
    <YR>YR</YR>
    <MR>MR</MR>
    <CB_DATE>CB_DATE</CB_DATE>
    <CE_DATE>CE_DATE</CE_DATE>
    <DIRECTOR>DIRECTOR</DIRECTOR>
    <FOUNDER>FOUNDER</FOUNDER>
    <TERRTYPE>TERRTYPE</TERRTYPE>
    </FSFM_Matches>
    <OfacMatchDetails>
    <UID>UID</UID>
    <TITLE>TITLE</TITLE>
    <SDNTYPE>SDNTYPE</SDNTYPE>
    <REMARKS>REMARKS</REMARKS>
    <ID_UID>ID_UID</ID_UID>
    <IDTYPE>IDTYPE</IDTYPE>
    <IDNUMBER>IDNUMBER</IDNUMBER>
    <IDCOUNTRY>IDCOUNTRY</IDCOUNTRY>
    <ISSUEDATE>ISSUEDATE</ISSUEDATE>
    <EXPIRATIONDATE>EXPIRATIONDATE</EXPIRATIONDATE>
    <ADDRESS1>ADDRESS1</ADDRESS1>
    <ADDRESS2>ADDRESS2</ADDRESS2>
    <ADDRESS3>ADDRESS3</ADDRESS3>
    <CITY>CITY</CITY>
    <STATEORPROVINCE>STATEORPROVINCE</STATEORPROVINCE>
    <POSTALCODE>POSTALCODE</POSTALCODE>
    <COUNTRY>COUNTRY</COUNTRY>
    </OfacMatchDetails>
    </List_Matched_Field>
    </Match>
    </List_AML_Finacle>

    avoid multi post
    http://forum.java.sun.com/thread.jspa?threadID=5249519

  • HT1212 it says my ipod is disabled for 22 million minutes. any ideas on how to get it unlocked without restoring it to factory settings?

    it says my ipod is disabled for 22 million minutes. any ideas on how to get it unlocked without restoring it to factory settings?

    By restoring from backup or waiting
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • In mdx how to get max date for all employees is it posible shall we use group by in mdx

    in mdx how to get max date for all employees is it posible shall we use group by in mdx
    example
    empno  ename date
    1         hari        12-01-1982
    1         hari        13-06-2000
    by using above data i want to get max data

    Hi Hari3109,
    According to your description, you want to get the max date for the employees, right?
    In your scenario, do you want to get the max date for all the employees or for each employee? In MDX, we have the Max function to achieve your requirement. You can refer to Naveen's link or the link below to see the details.
    http://www.sqldbpros.com/2013/08/get-the-max-date-from-a-cube-using-mdx/
    If this is not what you want, please provide us more information about the structure of you cube, so that we can make further analysis.
    Regards,
    Charlie Liao
    TechNet Community Support

  • How the get an overview of all existing sapscripts ?

    How the get an overview of all existing sapscripts ?
    does someone know ?
    thanks again : )

    Hi David,
    Go to SE71, and press F4 in the Form name tab.There you can view the various Modules, from where in you can get an overview of the all forms related to the corresponding modules.
    SE71 is the transaction for creating customized forms, viewing and making changes to the standard forms by copying them to Z-forms.
       Hope this is helpful to you. If you need further information, revert back.
    Reward all the helpful answers.
    Regards
    Nagaraj T

  • HT1719 My shuffle is not syncing all of the selected songs & I can't figure out how to get it to sync all the checked songs. Please help!

    My shuffle is not syncing all of the selected songs & I can't figure out how to get it to sync all the checked songs (syncs some, but not others). Please help!

    Perhaps this article can help.
    Syncing music to iPod shuffle
    B-rock

  • How to get an unlock code for Samsung Galaxy S3?

    How to get an unlock code for Samsung Galaxy S3?

    Unlocking your device for use on a USA carrier, is not possible.
    Maybe in the future but not now.
    You will have to purchase a new device on the other carrier.
    Unlocked for use in other countries is possible if it isn't already u locked from the factory.
    Good Luck

  • How to get an unlock code

    how to get an unlock code?

    If your Device is Carrier Locked... Contact the Carrier.
    If you cannot remember the Screen Passcode... Connect to your computer... open iTunes and Restore.

  • Will my replacement iphone be unlocked to all networks?

    I have just recieved a replacement Iphone 4s as my old one was faulty, But recently bought myself a Iphone 5.
    I wanted to pass the new Iphone 4 onto my sister but i was on Vodafone & shes on 3.
    Will the replacement that Apple have sent me be unlocked to all networks? Or still be on Vodafone?
    Bearing in mind its a whole new handset.
    My sister is awaiting the delivery of her micro sim so cannot test it out to see until that comes.
    Anyone that could help would be appriciated! Thanks

    The replacement handset will have the same carrier profile settings that the old one had.  If the old one was carrier locked, the new one will be as well.  You can always ask the carrier to unlock the device. It's up to them.
    If they agree, the process takes a few days to work thru the system, then you restore the replacement iPhone 4, and the new carrier profile (sim-unlock or carrier unlock) will be applied.  But again, it is at the carrier's discretion.
    HTH

  • How to get a summ of all previous values

    Hello ALL,
    Could you please give an advice on how to find the sums of all previous values in 1 select without using dynamic sql. Cross join is not a variant because of a huge response time.
    OR may be there are any other ideas on how to find first rows with total sum equals to some general value? My idea is to find a sum of all preceding values and the first of such sums that would be equal to the general value or greater it is a necessary result.
    For example we have goods receipts:
    MATERIAL | BATCH | QTY
    material1 batch1 1
    material1 batch2 2
    material1 batch3 3
    material1 batch4 4
    material1 batch5 5
    material1 batch6 6
    and general qty is 7 - it's our current stock. So I should take material from [batch1 to batch4] to get necessary QTY >=7 (1+2+3+4=10>7) So our current stock consists of batch1,batch2,batch3 and remains of batch4.
    Thanks in advance!
    Edited by: user9321926 on Jun 18, 2010 3:56 AM

    Some thing like:
      1  select
      2     empno,
      3     sal,
      4     (select sum(sal) from emp b where  b.empno <= a.empno) running_total
      5* from (select * from emp order by empno) a
    SQL> /
         EMPNO        SAL RUNNING_TOTAL
          7369        800           800
          7499       1600          2400
          7521       1250          3650
          7566       2975          6625
          7654       1250          7875
          7698       2850         10725
          7782       2450         13175
          7788       3000         16175
          7839       5000         21175
          7844       1500         22675
          7876       1100         23775
         EMPNO        SAL RUNNING_TOTAL
          7900        950         24725
          7902       3000         27725
          7934       1300         29025
    14 rows selected.
    SQL>

  • How to Get a List of All XMLElements (Follow up to previous posting)

    (CS5, Win7, 64Bit)
    I need a collection (or array, etc.) of all the XMLElement objects in a given document in flat form (just like the "Structure Tree"'s hierarchichal view - only flatened).
    I could not find any "normal" way (i.e., built-in property or method) to get at the information. Instead, I found that I had to recurse through the entire XMLElement tree, starting with the Root Element. For a large document, this can take close to a ten minutes, and sometimes I have to do this for an InDesgin Book containing over ten enormous INDD files.
    After "கற்பனை Imagine" responded to my previous post about how to get all the XMLTags, I assumed that myDocument.xmlElements would return a collection of all the XMLElements in the Document. Unfortunately, it does not - it returns only the Root XMLElement. Thus, I have to recurse therough the hierarchy of XMLElements under the Root XMLElement - which takes a very long time.
    There HAS to be a better way, right?
    Would it be better were I to recurse through all PageItems in the document and then recurse through each PageItem's XMLElement tree? I assume that wouldn't make a big difference either way.
    I'm open to suggestions...
    TIA,
    mlavie

    mlavie:
    I could not find any "normal" way (i.e., built-in property or method) to get at the information. Instead, I found that I had to recurse through the entire XMLElement tree, starting with the Root Element. For a large document, this can take close to a ten minutes, and sometimes I have to do this for an InDesgin Book containing over ten enormous INDD files.
    What do you intend to do with this flat layout of XMLElements? That probably matters a great deal.
    If performance is really at play, you can try using XML Rules instead of interacting with the DOM from JavaScript. But they are complicated and confusing and more suited to declarative programming.
    Imagine suggests:
    var a = myroot.evaluateXPathExpression ("//*");
        xmlObjArray.push(a[b--]);
    Why not stop there? evaluateXPathExpression already returns an array, why iterate over it and push its elements into a new array? What's wrong with the return value?

  • How to get the list of all formtypes in SBO?

    Hello,
    How can i get the list of all available formtype in SBO?
    Each SAP Business One form has a unique type to support multiple instances of the same form. For example, the type of the Purchase Order form is 142, Form=139 for Sales Order.
    Is this information stored anywhere?
    Thanks and Regards,
    Sheetal

    Hi Juha / Sheetal,
    Activating the menus will only help to get the forms which are "directly" accessible...
    ...but there are forms that come up only when clicking some button - or double-clicking - or activating a menu item in the (dynamic!) "Goto" menu etc.
    In 2005 SP01 a new function was introduced (and documented in the SDK Helpcenter) that can be used to iterate over all integer IDs (note there are a lot of gaps) up to 65535 and get information about the form and items on it (specifically the databinding!).
    Please take a look at the ResourceData property of the Application object in UI API!
    Gaps (in A version today - to my best knowledge): 10.000 - 20.000; 21.000 - 40.000; 41.000 - 50.000; 51.000 - 60.000...
    Regards,
    Frank
    <i>Visit the WiKi-FAQ at: https://wiki.sdn.sap.com/wiki/display/HOME/BusinessOneFAQ</i>
    BTW: What do you need that information on "all forms" for?
    Message was edited by:
            Frank Moebius

Maybe you are looking for