How to get iPhone 3GS Composite Video output to work

I have a iPhone 3GS with the latest 3.x FW (Updated 2/6/2010). I bought a Apple Composite video cable which lists iPhone 3GS as a supported product: MB129LL/B (one with 30 pin dock connector, composite, audio L&R, USB, power adapter).
When I connect the cable to the iPhone, audio output from music works (but is a little quiet compared to other inputs to my stereo).
However, I cannot get the video output to show any video. When the iPhone is connected my TV goes from a Blue Screen to Black, so it seems that something is being output.
I have tried both Apple and 3rd party cables with no luck. I had the same results with the previous 3.0 FW. Phone is new as of 11/2009.
I have tried photo slide shows while connected and I also purchased a product to make a iPhone compatible video.
In all cases, the TV screen remains black, but the iPhone screen shows the video fine.

Have you tried connecting other composite video sources to your TV, to be sure the problem isn't in your TV set?

Similar Messages

Attempted to sync IPhone 3gs several times, didn't work. Finally did, saved it and then went into recovery. How do I access the saved information?

Attempted to sync IPhone 3gs several times, didn't work. Finally did, saved it and then the phone went into recovery. How do I access the saved information prior to recovery?
Thanks

Hello Snosilla! I'm so sorry for all the confusion and for all the time taken to activate service with us! I do see that the iPhone 5c is $99.99 right now. The iPhone 5s is actually $199.99. There's no need to call Pam anymore, we can take over from here.
I've followed you in the forums. Please accept me, and follow me back. Then, send me a Direct Message and I can look into this for you. If you do not have an active line yet, I may need to get you through to our activations department, but I will do all I can!
Thank you!
ChristinaB_VZW
VZW Support
Follow us on Twitter @VZWSupport
VZW Support

IPhone 4S USB Video Output

Hello,
I know there are video breakout cables that plug in the dock connector (30 pin) for both component and composite video output. With the 4S 1080p capability I know there is a dock adapter that allows for HDMI output via a separate cable.
What I want to know is with all the new USB monitors (USB 2.0 and 3.0 powered and display monitors via a USB connection) about to hit the market is anyone aware of whether or not the standard USB to 30 pin docking cable can be plugged into such a monitor for mirroring or display?
Thanx,
Macport

Brendan,
Thanx for getting back to me on this. You've got to imagine it will just be a matter of time before someone makes this happens. For now though your response helps my decision making as to a choice of mobile monitor for presentations.

How to check iphone 3gs is factory unlock

how to check iphone 3gs is factory unlock

Put a SIM from another carrier in it...
Where did you get it from? If you're in the U.S. There is no such thing as a factory unlocked iPhone 3Gs.

I have an Apple I Phone 4S which is great but, can someone help me how to get the photos and videos to my PC which runs on MS XP. I would like to be able to edit and copy to a DVD.

I have an Apple I Phone 4S which is great but, can someone help me how to get the photos and videos to my PC which runs on MS XP. I would like to be able to edit and copy photos and videos to a DVD.

Connect your iPhone to your computer. Tp your pc should recognize your iPhone as a camera. Use what ever application you have on the pc to transfer files from a camera to your computer.

Trying to use my iPhone 3GS as audio output

This might sound a little convoluted, but here it goes.
I'm trying to get some use for my iPhone 3GS, and i though i might be able to connect it to an audio system and stream music from my Mac library to it. If i use iTunes, ideally, i could use my iPhone 5S to control iTunes, and therefore, control the music that's being output through the 3GS.
Is this even possible? Using my iPhone 3GS as audio output from a Mac, preferabily using iTunes instead of 3rd party app?
Thanks!

$25 is a little steep.... Since i'm trying to make this as cheap as possible (I guess for a little more than that, i can buy a used Airport Express and save me the trouble)

How to mount iPhone 3gs on a macbook pro with maverick ?

how to mount iPhone 3gs on a macbook pro with maverick ?

There are unsupported mechanisms of doing what you want. You can search for iTunesFS.
Garage Band should allow you to send Ring Tones to the 3GS via iTunes - GarageBand '11: Send an iPhone ringtone to iTunes

After upgrading to ios 5.1 on my iphone 3gs, the battery percentage dosent work well, it dosent move. how can i fix the problem?

after upgrading to ios 5.1 on my iphone 3gs, the battery percentage dosent work well, it dosent move. how can i fix the problem?

Have you tried doing turning the battery level display off and then General -> "Reset all settings"? You won't loose any data and that should do the trick.

How to get check box in alv output

hi gurus
can anyone explian me how to get check box in alv output
it should not be a pop up window
i want to get in output itself
tahnk you
regards
kals.

Hi
by using rs_selfield
ty to call dynamic subroutine..
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
read table rs-selfield with key cond = 'X'
endform.
see the below example
REPORT Z_GET_REFRESH no standard page heading.
type-pools : slis.
tables : makt,
mara.
data : i_fieldcat type slis_t_fieldcat_alv.
CONSTANTS :
gc_refresh TYPE syucomm VALUE '&REFRESH'.
data : begin of i_makt occurs 0,
matnr like makt-matnr,
maktx like makt-maktx,
end of i_makt.
data : v_repid like sy-repid,
g_user_command type slis_formname value 'USER_COMMAND',
g_status_set type slis_formname value 'SET_PF_STATUS',
lt_event_exit TYPE slis_t_event_exit,
ls_event_exit TYPE slis_event_exit.
DATA:LC_GLAY TYPE LVC_S_GLAY.
select-options s_matnr for mara-matnr .
start-of-selection.
select matnr maktx from makt into table i_makt
where matnr in s_matnr.
end-of-selection.
Fill the fieldcatlog
perform fill_field.
Call the FM
perform call_fm.
*& Form fill_field
text
--> p1 text
<-- p2 text
FORM fill_field.
data wa_fieldcat type slis_fieldcat_alv.
clear : wa_fieldcat.
wa_fieldcat-tabname = 'I_MAKT'.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-outputlen = '18'.
wa_fieldcat-seltext_l = 'Material #'.
wa_fieldcat-col_pos = '1'.
append wa_fieldcat to i_fieldcat.
clear : wa_fieldcat.
wa_fieldcat-tabname = 'I_MAKT'.
wa_fieldcat-fieldname = 'MAKTX'.
wa_fieldcat-outputlen = '40'.
wa_fieldcat-seltext_l = 'Material Desc'.
wa_fieldcat-col_pos = '2'.
append wa_fieldcat to i_fieldcat.
ENDFORM. " fill_field
*& Form call_fm
text
--> p1 text
<-- p2 text
FORM call_fm.
v_repid = sy-repid.
LC_GLAY-EDT_CLL_CB = 'X'.
CLEAR ls_event_exit.
ls_event_exit-ucomm = gc_refresh. " Refresh
ls_event_exit-after = 'X'.
APPEND ls_event_exit TO lt_event_exit.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = g_status_set
I_CALLBACK_USER_COMMAND = g_user_command
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS = LC_GLAY
IS_LAYOUT =
IT_FIELDCAT = i_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT = lt_event_exit
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_makt
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " call_fm
FORM USER_COMMAND *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
data i_RSPARAMS like RSPARAMS occurs 0.
CASE R_UCOMM.
WHEN '&IC1'.
read table i_makt index rs_selfield-tabindex.
SET PARAMETER ID 'MAT' FIELD i_makt-matnr.
if not i_makt-matnr is initial.
call transaction 'MM02' and skip first screen.
endif.
when '&REFRESH'.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
CURR_REPORT = v_repid
IMPORTING
SP =
TABLES
SELECTION_TABLE = i_RSPARAMS
EXCEPTIONS
NOT_FOUND = 1
NO_REPORT = 2
OTHERS = 3
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
submit z_get_refresh with selection-table i_RSPARAMS.
rs_selfield-refresh = 'X'.
ENDCASE.
MOVE '&REFRESH' TO r_ucomm.
ENDFORM.
FORM set_pf_status *
FORM SET_PF_STATUS USING rt_extab TYPE slis_t_extab.
DELETE Rt_extab WHERE fcode = gc_refresh.
SET PF-STATUS 'STANDARD_FULLSCREEN' OF PROGRAM 'SAPLKKBL'
EXCLUDING Rt_extab.
*SET PF-STATUS 'STANDARD' EXCLUDING rt_extab.
SET TITLEBAR sy-tcode.
ENDFORM.

How to get youtube watch in video ipod nano?

How to get that youtube in video ipod nano and but i don't know how too make?

The iPod nano cannot use YouTube. It cannot connect to the Internet at all.

How to activate iphone 3gs into ios 6

how to activate iphone 3gs ios 6

Hi, have you checked for the software update?
Settings----->General----->Software Update

HT4972 how to update iphone 3GS version 4.2.1 to IOS 5

how to update iphone 3gs version 4.2.1 to IOS 5

If a 3GS, follow the directions here:
http://support.apple.com/kb/HT4972?viewlocale=en_US&locale=en_US
If an iPhone 3G, it can't be updated beyond iOS 4.2.1...that's the end of the line for that model iPhone.

HT4623 how to unlock iphone 3gs factory setting

how to unlock iphone 3gs factory setting?

What does "unlock iphone 3gs factory setting" mean?
Carrier unlock?
Passcode unlock?
Please explain

I recently changed my wifi password at home and now my iphone will not connect. It will not ask me for a password just says will not connect to network. Advice on how to get iphone to ask network password for wifi?

I recently changed my wifi password at home and now my iphone will not connect. It will not ask me for a password just says will not connect to network. Advice on how to get iphone to ask network password for wifi?

First, try tapping on the network in the Wi-Fi settings and then tap "forget this network". Then reselect the network in the main Wi-Fi settings screen and see if will then ask for a password. If not, try resetting the Network Settings in the General -> Reset section and then reconnecting to your W-iFi.
Hope this helps.

How come my iphone 3gs camera takes pix even w/o me pressing the ...

How come my iphone 3gs camera takes pix even w/o me pressing the "shutter button"? this doesn't happen everytime tho. just there are times when it does.
could my iphone be defective?

Hi,
sorry, I really don´t understand what you mean. - Can you please explain
in an other way?
Does the shutter button on the screen work sometimes and sometimes not?

How to get iPhone 3GS Composite Video output to work

Similar Messages

Maybe you are looking for