How to get iPhoto on dual monitors

IS THERE AWAY TO WORK IPHOTO ON DUAL MONITORS LIKE APERTURE

No, but there is a way to type without using Caps Lock and that way you don't look like you're shouting at everybody.

Similar Messages

  • I downloaded updates to iphoto and computer erred on install. I cannot open iphoto. I decided to reinstall iphoto from app disk and now I get an error message"......iphoto may be damaged or incomplete"  Any suggestions how to get iphoto going again???

    I downloaded updates to iphoto and computer erred on install. A report went to Apple.
    I cannot open iphoto. I decided to reinstall iphoto from my app disk and now I get an error message"......iphoto may be damaged or incomplete"  Any suggestions how to get iphoto going again???
    My iphoto library still exists and I don't want to lose it.

    https://discussions.apple.com/community/ilife/iphoto

  • MiniDisplay to HDMI : How to turn off the Dual Monitor output when..

    miniDisplay to HDMI : How to turn off the Dual Monitor output when the adapter is attached and the TV is off ? And will keeping the adapter connected even if it is not in use, cause damage to the adapter ?

    I have my external monitor/tv setup of the left. If I leave the adapter attached with the TV off, I am still able to cross the border/boundry of my MBP screen ! As instead of detecting a TV, the MBP is detecting the adapter as a screen. I do not want to damage my thunderbolt/miniDisplay port by plugging and unpluggin the unit each and every time.

  • How to get iPhotos to recognize my email provider

    How to get iphotos to recognize my email provider?  When I click 'send photo' I get an error window, but no instructions about what is wrong.
    david high springs

    Want to give a hint - like sharing the error you get for example - who is your e-mail provider? what e-mail client are you using?
    LN

  • How do I hook up dual monitors to Macbook Pro

    Looking to run dual monitors with a Macbook Pro. How many adapters am I going to end up getting to run both monitors?

    same question want to run dual monitors  Dell P2414H 24" Dual Monitor with my macbook pro...
    dell configuration is as follows.
    Connectivity:
    1x USB 2.0 (Upstream)
    3x USB 2.0 (Downstream)
    1x DVI-D
    1x DisplayPort
    what adapters should i get?

  • How do I setup a dual monitor (ATI fglrx with KDE)?

    Hi, I'm trying to setup a dual monitor.. I connected with DVI to DVI and after restarting X the second monitor becomes a mirror/clone of the first (original laptop screen). However, I don't want it to be mirrored. I only want to have windows I drag over to it on the second monitor. How do I do that? In Control Center>Display, I can only choose settings for screen 1, I don't know why it can't find my 2. screen (even though X does).
    Here's xorg.conf (I would appreciate if I could stick to only configuring it in Control Center though):
    # xorg.conf (xorg X Window System server configuration file)
    # This file was generated by dexconf, the Debian X Configuration tool, using
    # values from the debconf database.
    # Edit this file with caution, and see the xorg.conf manual page.
    # (Type "man xorg.conf" at the shell prompt.)
    # This file is automatically updated on xserver-xorg package upgrades *only*
    # if it has not been modified since the last upgrade of the xserver-xorg
    # package.
    # If you have edited this file but would like it to be automatically updated
    # again, run the following command:
    # sudo dpkg-reconfigure -phigh xserver-xorg
    Section "Files"
    EndSection
    Section "InputDevice"
    Identifier "Generic Keyboard"
    Driver "kbd"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "no"
    EndSection
    Section "InputDevice"
    Identifier "Configured Mouse"
    Driver "mouse"
    Option "CorePointer"
    Option "Device" "/dev/input/mice"
    Option "Protocol" "ImPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Emulate3Buttons" "true"
    EndSection
    Section "InputDevice"
    Identifier "Synaptics Touchpad"
    Driver "synaptics"
    Option "SendCoreEvents" "true"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "HorizEdgeScroll" "0"
    EndSection
    Section "InputDevice"
    Driver "wacom"
    Identifier "stylus"
    Option "Device" "/dev/input/wacom"
    Option "Type" "stylus"
    Option "ForceDevice" "ISDV4"# Tablet PC ONLY
    EndSection
    Section "InputDevice"
    Driver "wacom"
    Identifier "eraser"
    Option "Device" "/dev/input/wacom"
    Option "Type" "eraser"
    Option "ForceDevice" "ISDV4"# Tablet PC ONLY
    EndSection
    Section "InputDevice"
    Driver "wacom"
    Identifier "cursor"
    Option "Device" "/dev/input/wacom"
    Option "Type" "cursor"
    Option "ForceDevice" "ISDV4"# Tablet PC ONLY
    EndSection
    Section "Device"
    Identifier "Generic Video Card"
    Driver "fglrx"
    Busid "PCI:1:0:0"
    Option "XAANoOffscreenPixmaps" "on"
    Option "VideoOverlay" "on"
    Option "TexturedVideo" "on"
    Option "Textured2D" "on"
    Option "TexturedXrender" "on"
    Option "UseFastTLS" "1"
    Option "BackingStore" "on"
    Option "MaxGARTSize" "128"
    EndSection
    Section "Monitor"
    Identifier "Generic Monitor"
    Option "DPMS"
    Horizsync 30-70
    Vertrefresh 50-160
    EndSection
    Section "Screen"
    Identifier "Default Screen"
    Device "Generic Video Card"
    Monitor "Generic Monitor"
    Defaultdepth 24
    EndSection
    Section "ServerLayout"
    Identifier "Default Layout"
    screen "Default Screen"
    Inputdevice "Generic Keyboard"
    Inputdevice "Configured Mouse"
    Option "AIGLX" "on"
    # Uncomment if you have a wacom tablet
    # InputDevice "stylus" "SendCoreEvents"
    # InputDevice "cursor" "SendCoreEvents"
    # InputDevice "eraser" "SendCoreEvents"
    Inputdevice "Synaptics Touchpad"
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    Option "RENDER" "Enable"
    Option "DAMAGE" "Enable"
    EndSection
    Section "DRI"
    Mode 0666
    EndSection

    Try using amdcccle (from the command-line) if you want to avoid configuring in Xorg.conf
    Otherwise, you can try Option "DesktopSetup" "horizontal" in your fglrx device section

  • How to get Iphoto to work again after Dropbox screwed it up?

    I had never used Dropbox and opened an account primarily as a backup for photo storage.  I moved my Iphoto library to the Dropbox folder. After a week of Dropbox churning tens of thousands of “files” without really uploading, I realized something was wrong and have since learned there is some disconnect in how Dropbox handles Iphoto.  Something about symlinks, but I don’t need to know.
    That’s not my question. I moved my Iphoto library back to Applications.  All the photos appear still to be there, but I’ve lost functionality.   I can’t advance from photo to photo within an “event,” or edit photos through Iphoto.  The link to my external editor (PS Elements 10) also doesn’t work any more.  I can’t send an individual photo to PS, or open a photo from the Iphoto library in PS.
    Screw Dropbox, I won’t try to use it again.  But how do I get Iphoto to work again like it used to?  It seems like Iphoto has somehow been de-linked from the Iphoto library.
    Thanks,
    Case

    I dragged and dropped the Iphoto library to the pictures folder and now the library appears in BOTH pictures and applications. (The Iphoto library icon in the Pictures folder has the little curved arrow indicating a link.)   Should I have copied and pasted?
    When I open Iphoto, it goes to one of the recent pictures in the library and the regular menu appears on the left (events, etc.).  But I can't advance to different pictures within in the folder.  I hit "edit" and none of the editing functions come up.  I right-click on the photo to bring up the usual options like edit in external editor and nothing happens.  As I said in my first e-mail, it links but has no functionality.
    You say to do a restore.  I've been backing up my Mac with My Book Studio and Time Machine, but never tried to restore from the My Book.  The last backup was a month or so ago.  Is that the kind of restore you're talking about?  Can I just restore Iphoto (and iphoto library?) without messing with everything else?
    Thanks for your help.
    Case

  • How to get iPhoto movies into iMovie?

    Yosemite was recently installed on my 2012 Macbook Pro. Previously, whenever I opened iMovie it would automatically thumbnail any new movies in my iPhoto library and I’d be able to use them immediately in iMovie. Since the Yosemite install, there’s a new version of iMovie and I can’t figure out how to get the movies in iPhoto into iMovie. So confused. Help!

    within iMovie on the left side go to iPhoto Library, then movie the mouse slightly to the right where you see choices for events...faces...places....try selecting events and it should bring up what you may be looking for.  From this point you can select photos or videos to move into your project.  hope this helps

  • How to get iphoto 9.5.1slideshow to play photos in order manually entered

    how do I get Iphoto 9.5.1 slideshow to play photos in the order I manually entered them?  Mac OS X 10.9.4

    There's a bug with iPhoto 9.5 and Mavericks in that slideshows from Albums do not play correctly if they are sorted manually.  Only photos that have been sorted by date, keyword, rating or title will play from albums correctly.
    To have a slideshow with photos sorted manually use the slideshow mode in iPhoto.
    Send a bug report to Apple via http://www.apple.com/feedback/iphoto.html.

  • How to get iphoto on mavericks as version 9.6 needs yosemite

    hi guys,
                i do not have iphoto on mavricks as 9.6 only works for yosemite. But as yosemite is very slow I reinstalled mavricks so now i dont know how to get a version of Iphoto that is compatible with mavricks.

    For Mavericks y0ou nee iPhoto '11 version 9.5.1 - what version did you have before you reinstalled Maverics? You should be able to
    reinstall from the original source - probably #3
    Could be
    1 - the restore disks that came with the computer - if it came with CDs and you do not know where they are then contact Apple to see if they can be replaced
    or
    2 - the iLife DVD that you purchased
    or
    3 - the app store - log in under the Apple id used to purchase the software or to set up the computer - look under purchases - you might have to unhide or accept the Application first
    LN

  • How to get iphoto 4 (?) from 2.0.1. ?

    hello...
    i'm obviously quite behind with the iphoto downloads! i have version 2.0.1 and am trying to upgrade, mostly because i want to put photos on my ipod, and i understand you need version 4.something for this? my mac is 10.2.8. what i need to know is:
    -what is the highest iphoto available to 10.2.8?
    -and where can i get this, as i've searched and can't seem to find any downloads for below iphoto 5?
    -can i even get a recent enough iphoto on this computer to use to put photos on the ipod?
    thanks in advance for any help,
    jo

    First check your camera manual for the right USB settings for downloading and the correct procedure for attaching your camera to the Mac for downloading.
    Look to see if your camera memory shows up on the desktop with a removable drive icon. If it does you are all set.
    To set iPhoto to automatically open when a camera is attached you have to open the application Image Capture. In the IC preferences menu set what happens when you hook up your camera.
    Click on the Advanced Search tab in Apple support and enter "compatible cameras" to check that.
    If your camera doesn't work with iPhoto get an inexpensive USB card reader. They are a good idea too for saving wear and tear on your camera connections.
    If you want to upgrade you have a simple option - buy iLife 06 to get iPhoto 6. There are no free downloads to UPGRADE iPhoto from iPhoto 2. The online downloads are UPDATES for people who already own the newer versions.

  • How to get iPhoto back after hard drive replaced?

    I went in to get a new hard drive on my MacBook Pro because it had stopped working and lost everything on my laptop including iPhoto.
    How should I go about getting the app back?

    reinstall from the original source
    Could be
    1 - the restore disks that came with the computer
    or
    2 - the iLife DVD that you purchased
    or
    3 - the app store - log in under the Apple id used to purchase the software or to set up the computer - look under purchases - you might have to unhide or accept the Application first
    LN

  • How to get iPhoto '08 to export comments as part of iWeb photo page?

    I've got an event in iPhoto '08, and want to export it as a photo page (darkroom template). It exports all the photos and titles, but not the comments from iPhoto. I cannot figure out how to make it export the comment. Where is the setting for this?
    It's very easy in iPhoto to export as a regular html with the comments, but somehow not to iWeb.

    Marguerite:
    Welcome to the Apple Discussions. There's an Applescript that will take your comments and put them in the title field in iPhoto. Then when you create the photo page in iWeb the comments will be in the title field and will be displayed. Once the iWeb page is created you can go back in iWeb and use the Photos->Batch Change->Title to File Name menu option and get the old title back.
    Here's where you get the Applescript. Be sure to read the comments to see where the one error, regarding the Å character that is in the script: http://www.macosxhints.com/article.php?story=20070822121100394&query=applescript %2Btitle
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • How to AWESOME wallpaper on dual monitors?

    I have set up two monitors as Screen0 and Screen1 in xorg.conf
    I am wondering how to display different wallpapers on these two monitors.
    What can I put in my .xinitrc?
    thanks

    I use both nitrogen and feh. Sometimes I'm connected to a second monitor and sometimes not so I want the right wallpaper restored depending. I use the following in my .xinitrc:
    if [ `xrandr | grep -c 3840` -ne 0 ]; then # running dual-head
    nitrogen --restore # set different bg on each monitor
    elif [ -f $HOME/.fehbg ]; then
    eval `cat ~/.fehbg` # set standard single screen bg
    fi

  • How to get iPhoto slide show .mov to YouTube?

    I've created a slide show in iPhoto which I want to upload to YouTube.
    It is created as a movie, .mov 45 mb
    I thought I could load it directly to YouTube, but apparently I have to convert it. Can someone tell me how to do the conversion?
    YouTube says the preferred formats for video are H.264, MPEG-2 or MPEG-4 preferred.
    Thanks for your assistance,
    Jeanie

    Thanks, Larry,
    I've downloaded this software -- great tool.
    However, I still am unable to upload to YouTube. I exported the mov to create an MPEG-4. It plays perfectly on my computer, but I still get an error message when trying to upload to YouTube.
    There is another weird thing that has been happening, which might be the problem or a clue to the problem.
    In iPhoto, my first slide is a title screen. However, I noticed that after I uploaded the mov to Audio Acrobat, a black slide precedes the Title slide. I thought maybe something happened at Audio Acrobat (haven't taken the time to call them). I have this video playing at one of my web sites, and there is a black slide at the beginning.
    OK, so back to this .... the same thing happens when I open the iPhoto file in MPEG Streamclip. It starts with a black slide rather than the title slide.
    To test to see if a black slide got added in iPhoto, I use the back arrow with the title screen visible and the last slide shows. In other words, iPhoto is not showing a black slide.
    Any suggestions?
    Thanks,
    Jeanie

Maybe you are looking for

  • Cannot delete books from iPod Touch

    I downloaded two MP3 books from our library to my iPod Touch. Now I want to delete them but I cannot find a way to do that. They don't appear when I connect the iPod to my computer. Any help would be appreciated.

  • Invoking a call to a window executable fails when request output to file

    Hi, When invoking a call to a window executable it fails(returns 1 instead of 0) when requesting output to file by using "> filename.txt". This nornally works when run directly within a windows command prompt, and it also works if I don't add the ">

  • External HD projector DVI / Thunderbolt / HDMI ?

    Hi I have two MBPs , one vs10.5 and a recently bought one with vs 10.9 installed. I do Video movies in HD 1920 x 1080, which I project on a large screen using an HD 1920 x 1080 projector. With my 10.5, I connect it to the projector using a DVI to HDM

  • 10.6.3  -   still error 36 file copy errors

    After getting a new mac with 10.6 I started having problems copying files, namely that copying aborts with error 36 quite frequently. I never had such problems on my old powermac with 10.3.9. After some reading here, I discovered this was a known 10.

  • Oracle VM 3.1.1 on HP DL785 G6 server

    Hello, I have installed the OVM Server 3.1.1 on a DL785 Server from External USB DVD drive the installation process was OK and installation finished successfuly When I rebooted the server afterthe installtion a red full screen appeared with "Illegal