How to get iPhotos to recognize my email provider
How to get iphotos to recognize my email provider? When I click 'send photo' I get an error window, but no instructions about what is wrong.
david high springs
Want to give a hint - like sharing the error you get for example - who is your e-mail provider? what e-mail client are you using?
LN
Similar Messages
-
How do I get iphoto to recognize scanned jpeg photos?
How do I get IPhoto to recognize sacnned jpeg photos? The response is that the format is nor recognized!
What format are the photos being scanned into and where are they located after scanning? Can you open them in Preview?
OT -
How do I get iphoto to recognize that a computer really is connected to the internet? I cannot use places to locate my photos, because the software keeps telling me my computer is not connected. I know the computer is connected.
Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. It the problem persists make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
If the new library does'nt have that problem then your original library is damaged. Post back if that's the case and we'll go from there.
OT -
How do I get iPhoto to recognize a scanned jpeg?
I am trying to scan old photographs from books, and put them into iPhoto. Eventually all the photos will be used in an iMovie project. I am having trouble getting iPhoto to recognize the format of the scanned picture. When I try to import the jpeg file, iPhoto says it cannot recognize the format. Any suggestions?
As a text try this:
go to Toad's Cellar and download the Automator workflow applicaton "Convert to JPG and Embed sRGB profile".
unzip the application on the Desktop.
drop a copy of one of your scanned photos onto the Automator workflow application.
import the resulting converted image file into iPhoto.
If the above lets you import the image file into your library you can process the remaining files and import them. -
I downloaded updates to iphoto and computer erred on install. A report went to Apple.
I cannot open iphoto. I decided to reinstall iphoto from my app disk and now I get an error message"......iphoto may be damaged or incomplete" Any suggestions how to get iphoto going again???
My iphoto library still exists and I don't want to lose it.https://discussions.apple.com/community/ilife/iphoto
-
I just installed Photoshop and want to use it as the external editor in iPhoto. I also have PS Elements on the computer and the only external editor I can get iPhoto to recognize is PSE. Any help in changing the external editor to PS would be appreciated!
Welcome. I am using Photoshop CS5 and this works fine for me. Possibly Adobe has changed this in CS6. Hopefully, LarryHN will have further suggestions. Best.
-
How to get a confirmation when your email is delivered or read ?
With Mail app ,How to get a confirmation when your email is delivered or read?
When I send mail with Mail app , there is flying letter pops up. But now I could not see anymore. Do you know how can I active that animation ?
Thanks for your help -
I use a Pandigital Photolink one touch scanner. Then I upload the pics from the hd card to the computer. In order to get iphoto to recognize the images I have to first save each photo using 'save as' to my documents, then 'open with' iphoto. Is there a way to do a group 'save as' and then open the group in iphoto?
Scanning this way is much faster than using my printer but having to save each individually defeats the purpose.
Thanks, GailfromlangleyI use a Pandigital Photolink one touch scanner. Then I upload the pics from the hd card to the computer. In order to get iphoto to recognize the images I have to first save each photo using 'save as' to my documents, then 'open with' iphoto. Is there a way to do a group 'save as' and then open the group in iphoto?
Scanning this way is much faster than using my printer but having to save each individually defeats the purpose.
Thanks, Gailfromlangley -
Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?
The latest version of iPhoto which can operation with OS X 10.4.11 is iPhoto 7 which is part of iLife 08. You might be able to find a copy of iLIfe 08 on Amazon.com or Ebay.com.
iLife 08's full system requirements are:
Mac computer with an Intel, PowerPC G5, or PowerPC G4 processor
iMovie ’08 requires a Mac computer with an Intel processor, a Power Mac G5 (dual 2.0 GHz or faster), or an iMac G5 (1.9 GHz or faster)
iDVD ’08 requires 733MHz or faster processor
512 MB of RAM; 1 GB recommended; high-definition video requires at least 1 GB of RAM
3 GB of available disk space
DVD drive required for installation
From: http://support.apple.com/kb/HT1010
OT -
How to get FCP to recognize an animation sequence, not individual clips ?
Hello All;
Could someone tell me how to get FCP to recognize a .png animation sequence (Exported from After-Effects) ? When I place the directory or files onto the timeline, I get a project 27 minutes long, rather than 10 seconds like it should be. I know this must be easy and I'm just missing something.
TimYou exported a .png image sequence from After Effects?
Three choices:
1) In Final Cut Pro, click anywhere in the 27 minute long timeline and type Command + A to select all the clips. Once they are all selected Control Click on any one of the selected clips, and from the drop down menu choose Duration. Set the duration each clip is supposed to be ( 1 frame? 3 frames?) and click OK.
2) In Final Cut Pro, go to the menu Final Cut Pro > User Preferences. When The User Preferences open, click on the Editing Tab. Set the Still/Freeze duration to the duration you want for each of the stills in your image sequence and click OK. You will then need to re-import the stills, and they will now each be the new duration. This does not work on the stills you have already imported- you need to import the stills again.
3) Open Quicktime Pro (Quicktime Player 7) and go to the menu File > Open Image Sequence. . .
Navigate to the first frame of your image sequence and click Open. You will be asked to pick your frame rate. Set that and click OK.
When it opens, go to the menu File > Export and the Save Exported File As . . . window will open. Choose the codec you want for your animation (Pro Res, most likely) and, determine a location for the file and click Save. The image sequence will be exported as a Movie in the frame rate and codec you chose. Import that movie into FCP to edit or composite.
MtD -
How to get mac to recognize thumb drive?
how to get mac to recognize thumb drive?
Launch the Disk Utility application. Does the thumb drive appear in the list of volumes on the left side? If not, try using a different USB port. If the issue still occurs then try restarting the system. If the thumb drive appears in Disk Utility check out how it is formatted. Do you have data on it that you need? If it can be erased try formatting it with Disk Utility using the Mac OS Extended (journaled) format. If the thumb drive will be used in a Mac and PC environment then take a look at this article for additional information on choosing the right format.
http://www.macyourself.com/2012/03/11/how-to-format-a-drive-for-mac-and-pc-compa tibility/ -
How to get internal table from SAP Data Provider C#
Hello.
ABAP:
DATA: lt_t001 TYPE TABLE OF t001.
DATA: url(1000) TYPE c.
SELECT * INTO TABLE lt_t001 FROM t001.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
type = 'APPLICATION'
subtype = 'X-R3TABLE'
TABLES
data = lt_t001
CHANGING
url = url
EXCEPTIONS
OTHERS = 4.
C#:
using SAPDataProvider;
using SAPTableFactoryCtrl;
public void SetDataFromUrl(string url)
SAPDataProviderClass p = new SAPDataProviderClass();
p.SetDataFromURL("APPLICATION", "X-R3TABLE", url);
ISapDPR3Table tbl = p.GetDataAsR3Table("APPLICATION", "X-R3TABLE");
SAPTableFactoryClass tf = new SAPTableFactoryClass();
Table tb = (Table)tf.NewTable();
tb.ISAPrfcITab = tbl.DataTable; // Exception !!!!!!
How to get internal table from SAP Data Provider ?Hi Sergey,
I'm trying to do the same, have you found a solution to solved it?
thanks for your help.
Regards.
Jonathan -
I have a Windows 7 Pro OEM disk that can install either the 32 bit or 64 bit versions. When trying to setup a dual boot for my Mac Mini using Bootcamp version 5.0.3, I get the message that I have the 32 bit version of Windows. Any ideas on how I can get it to recognize the 64 bit version so that I can partition my "Mini"?
If by "OEM" you mean the disk came with another Win computer, it won't work. You need either a full retail verison or the "System Builders' Edition." I used the latter for my BC installation and it worked flawlessly and was marked as 64-bit--no mention of 32-bit.
-
How to get Iphoto to work again after Dropbox screwed it up?
I had never used Dropbox and opened an account primarily as a backup for photo storage. I moved my Iphoto library to the Dropbox folder. After a week of Dropbox churning tens of thousands of “files” without really uploading, I realized something was wrong and have since learned there is some disconnect in how Dropbox handles Iphoto. Something about symlinks, but I don’t need to know.
That’s not my question. I moved my Iphoto library back to Applications. All the photos appear still to be there, but I’ve lost functionality. I can’t advance from photo to photo within an “event,” or edit photos through Iphoto. The link to my external editor (PS Elements 10) also doesn’t work any more. I can’t send an individual photo to PS, or open a photo from the Iphoto library in PS.
Screw Dropbox, I won’t try to use it again. But how do I get Iphoto to work again like it used to? It seems like Iphoto has somehow been de-linked from the Iphoto library.
Thanks,
CaseI dragged and dropped the Iphoto library to the pictures folder and now the library appears in BOTH pictures and applications. (The Iphoto library icon in the Pictures folder has the little curved arrow indicating a link.) Should I have copied and pasted?
When I open Iphoto, it goes to one of the recent pictures in the library and the regular menu appears on the left (events, etc.). But I can't advance to different pictures within in the folder. I hit "edit" and none of the editing functions come up. I right-click on the photo to bring up the usual options like edit in external editor and nothing happens. As I said in my first e-mail, it links but has no functionality.
You say to do a restore. I've been backing up my Mac with My Book Studio and Time Machine, but never tried to restore from the My Book. The last backup was a month or so ago. Is that the kind of restore you're talking about? Can I just restore Iphoto (and iphoto library?) without messing with everything else?
Thanks for your help.
Case -
How to get iTunes to recognize an Italian album (not as Spanish)
I have a number of albums by my favorite Italian artists (Eros Ramazzotti, Nek, Laura Pausini, et al.). These artists habitually release their Italian-language CDs first, and then record and release the same CD (i.e., song list) in Spanish.
However, when here in the States I insert the original Italian-language albums, about half the time the album is given the Spanish title and song list, which irks my sense of order. Does anyone know how to get things right, short of my manually having to type in each album's song list? (Peeved: I'm moving to the Apple/Mac world form the PC world, and Windows Media Player at least gives me a choice between the Italian title/songlist and the Spanish one).
Thanks in advance for any advice.iTunes does not recognize cameras, it only recognizes iDevices.
Windows computers could careless that it's a phone or iPod or whatever, they will only recognize it as a camera.
Plug the device into the computer.
Lauch iTunes.
Sync whatever you like to it.
If you have issues, clearly explain exactly what is happening.
Maybe you are looking for
-
I would like some guidance in connecting APPLE TV to a Panasonic Plasma 42" TV
I am connecting my new Apple TV to a Panasonic 42" Plasma TV that is about 4 years old. Model: PN42C450B1D. Any suggestions. I'm using Directv for my TV connection.
-
Am getting a security warning when I use FireFox, how do I resolve it?
message says: ''Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party". I have a WPA secure wireless connection and this message does not appear if I u
-
Stock transfer invoice generate without pgi
Dear experts one stock transfer invoice has been created without pgi done and physicaly material has been despatched to sale depot at remote location.stock is not appearing in transit and also we are unable to do pgi right know. without canceling inv
-
Since I bougth iTunes Match I can't use my iTunes Store, my e-mail (@me) and iTunes match, all my songs have a message error. I feel I lost my music my account and my money. Apple I am very disapointed with your iCloud; it is a disaster. How can I do
-
Immediate assistance on slideshows to IDVD
I'm trying to put together a presentation on IDVD for a funeral so unfortunately I don't have a lot of time. I have 7 different slideshows that I sent to IDVD from IPhoto. I sent them all to the same presentation. Here is what I need to accomplish: A