How to get ipod touch screen to work?

Hi I have an issue getting my Ipod screen to respond to my touch or any period. It seems to only work on the left side of the screen,which means I can't slide it to my app page or even turn it off. I honestly don't know how it happened? It was out in the sun while I was skating and it never worked since. =c PLEASE HELP I don't think I have a warranty on it. =/

If you restore from a backup, it restore yore settings to the last time you synced to iTunes.  This will restore the latest password, which should now work.

Similar Messages

  • I can not get the touch screen to work

    How do I get he touch screen to work?

    You can try resetting the device by holding down the sleep and home key, past when you see the power down slider and until you see the silver apple. Let it reboot and see if that helps.
    If not you can try a complete restore with iTunes....or it's time to head to the apple store and have them look at it.

  • Ipod touch screen not working even after resetting to factory specs

    ipod touch screen not working even after resetting to factory spec.  lock symbol appears at top

    That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

  • Does anyone know how to get an animated screen saver working

    Hi I have a imac desktop not even a year old.  Does anyone know how to get an animated screen saver working please. Its a gimp screen saver and is it safe to use on my mac? 

    Go to the website from where you got the screensaver from and read its system requirements and instructions for installation. 

  • My iPod touch screen stopped working, how do i fix it?

    My iPod(4th generation) touch screen stopped working. Okay so it was fine earlier, my home button does not work so i have been using the assistive button for months, and until earlier today it got stuck, i tried to power it off but it doesn't let me slide to power it off, and it doesn't let me press anything on the assistive menu either, and i'm currently waiting for my ipod to die but it's taking forever since it's battery lasts forever! is there any other solutions you can give me?
    and i was wondering if my ipod has life insurance with apple so if something is wrong with the screen, can i take it for a new one? (my ipod is in very good conditions, not cracked or scratched, just the home button is an issue)
    thanks!

    Try restoring via iTunes. If necessary. try placing the iPod in recovery mode using one of these programs and then restore:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • How to make iPod Touch screen more sensitive?

    My iPod touch screen is not very sensitive to the touch. Sometimes i have to press down with a little force to get it to press what i want. I have tried other peoples iPod's, and compared to theirs, mine is not very sensitive. PLEASE HELP!

    Basics from the manual are restart, reset, restore.
    Try each of these.
    Did your put a screen protector on it?  Try removing it and see if that helps.

  • My ipods touch screen doesnt work anymore i cant unlock my ipod

    my ipod was working fine for a while and then now all of a sudden the touch screen doesnt work at all. Ive restored it twice now and i cant unlock my ipod because the screen doesnt work..anything i can do to fix it or do i have to buy a new one?

    If you restored to factory defaults/new iPod and still have the problem you very likely have a hardwre problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT201398 IPOD 5th gereration is not responding.  Ipod Touch screen wont work.

    Ipod 5th generations is not responding.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • How To Get Ipod Touch 2nd Gen to work with 64 bit Vista / Vista Ultimate

    Okay, so I just got me a 2nd Gen Ipod Touch for X-Mas..I decided to take a break and get this puppy installed on my HP Tablet. Like many of you, I struggled in frustrations. I hate Apple Support. Notice their method to resolve all of their issues in regards to Itunes not working or Touch not working is to just REINSTALL ITUNES....doesnt solve anything. I have a solution.
    For many of you, this may work, for those that are experiencing the same problem, please read below.
    What I am using:
    HP Tablet TX1000
    Platform: Windows Vista - Ultimate 64 Bit.
    I downloaded the 64 bit version of Itunes 8.02...hoping the thing will work, and still after plugging in my brand new ipod... i get an error message saying.
    "The IPOD you are using is not recognized by this version of Itunes, please delete and reinstall with 64 bit version of Itunes."
    However I did install the 64 bit version of ITUNES on my Vista. Before you guys delete and reinstall again. Do this first to confirm that my solution will help.
    Open up Itunes, go to help, click on Run Diagnostics. Select only, Ipod/Iphone Connectivity tests and hit next.
    If your Apple Mobile Device Service is RED, it means its not installed or not activated. Please read apple forums for the reactivation of AMDS. *If you are like me and did that help, and realized its not installed,* something on vista is preventing the install.
    Do the following.
    1) Delete ITUNES Completely. When asked for a restart, click No.
    2) Go to the C:\Program Files\Common Files and look for the Apple Folder and delete that puppy too.
    3) Redownload the 64 bit Installed and save to your desktop. You will need this later. DONT INSTALL NOW.
    4) Go to the Start/Circle Menu and on the bottom, type RUN in the Search and select the Run Program.
    4) Type msconfig and hit enter.
    5) When the Program pops up, in the General, DE-select normal startup and select. SELECTIVE START UP. and deselect/leave blank START UP ITEMS
    6) Move over to the Start Up Tab, DESELECT ANY VIRUS SCAN PROGRAM You Have Running.
    7) Click Apply then OKAY, and Exit that window.
    8) Now RESTART your computer.
    9) Reinstall ITUNES as done before.
    10) Go to HELP...run the diagnostics as before and your Apple Mobile Device should be green Now.
    11) Close that window. Connect your IPOD.
    12) iTUNES should now recognize your IPOD.
    After it works. Go back to MSCONFIG...and on General, put Normal Start Up. Click Okay. Restart.
    Hope that works.
    If IPOD is still not recognized, then its a driver issue and I dont know.
    The problem I was having was due to Apple Mobile Device Services not being installed.
    Sincerely,
    Dr. SkiLLz. M.D.

    This is an Answer for a Possible Solution. It worked for me and is still working. The issue I was having with my 64 bit vista, was Apple Mobile Device Service was not being installed, I dont know why. But I disabled any active running program through MSCONFIG, to allow a clean uninterrupted install of ITUNES 8.02. This allowed AMDS and drives from ITUNES to install. Hope this works for most of you.
    APPLE, please review your Support Methods. Re-installing doesnt help an issue that resulted from installing.

  • How do I get my touch screen to work?

    I can't slide the unlock bar, type anything but if I move my finger like a hundred times up and down I can get my notifications to drag somewhat... but it won't work for every part of my touch screen. I've tried the force restart and it hasn't responded, and tried waiting over night... which worked last time. Any thoughts? I really need my phone operational so I might go to an Apple store!

    Jailbroken?  If not, read this:
    iPhone: Troubleshooting touchscreen response

  • My touch screen isn't working so I can't use my iPad.any ideas how to get the touch screen working again?

    My son has done something to his ipad2 and now his touch screen does not work so he can't get from the lock screen as the screen isn't responding to touch. Any idea I can't even switch it off to restart.

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    If no joy... Try a Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
    From Here
    Unresponsive iPad
    http://support.apple.com/kb/TS3281

  • Brand new ipod touch screen not working properly

    My sons brand new ipod touch 32gb (well bought april 14) only occasionally will respond to the touch sceen, and when he does get into it the next screens dont work properly. Any suggestions?

    Try #2 and 3 in link below. If neither help, it's most likely a hardware issue then. Contact Apple and get it serviced.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • IPod Touch Screen not Working after using Assistive Touch

    Hey everyone!
    Yesterday my iPod Touch 4th gen touch screen froze (not the screen itself - it still wakes from sleep & responds to notifications and charging etc.), after myself accidentally taping 'Voice Control' on Assistive Touch.
    I was wondering, since it's out of warranty (it's a couple of years old), I can't send it back. I'm currently backing up & restoring it.
    Can anyone tell me if it's the software or hardware? It's going to take at least a good day or so to backup & restore, due to storage is full, and it's 32GB capacity, so it'd be good to know in advance.
    And if anyone has got any other suggestions to fix it, please let me know! It'll be much appreciated.
    Thanks heaps!
    PS. Please don't tell me to repair it...it'll cost just as much to fix my whole iPod, buttons & screen than it is to buy a brand new one!!

    There is really no what to know if hardware or software problem without trying to restoring the iPod. First from backup and then to factory settings/new iPod. If still problem then it is a hardware problem.

  • What can I do to get my touch screen to work

    My iPod touch will turn on but I can not get any further than that.  I tried restarting/rebooting but it doesn't respond.  Is there anything I can do?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT2305 How to get iPod touch generation 1 3.1 software update

    I have a iPod touch generation 1 and I am wanting 2 update the software from a 2.2 to a 3.2

    You cannot.
    3.1 is the latest available for this ipod:
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

Maybe you are looking for

  • How to store PDF file in BLOB column without using indirect datastore

    Hi , I want to store a pdf file in a BLOB column. But , it should be a direct store. I cannot usre indirect datastore. BLOB column doesn't support indirect datastore. I get the following error. ERROR at line 1: ORA-29855: error occurred in the execut

  • TSV_TNEW_PAGE_ALLOC_FAILED  with internal table declared with occurs 0

    HI guys, when the internal table is declared as occurs 0, the dump TSV_TNEW_PAGE_ALLOC_FAILED is encountered, when changing the declaration into standard table, th dump disappears. Why is this so? Thanks!

  • COR1 create process order change field value when save(PPCO0001)

    Dears When tcode: COR1 create process order, i want to change some fields value on the tab: "Goods Recpt", for example the field: Goods Recipient:                     , anyone konws how to do this? now i am trying to using the exit: PPCO0001( EXIT_SA

  • MEMBERSET IN EVDRE

    Hello, I'm trying to generate a memberset for an evdre report. My syntax is : YEAR="2008" OR (YEAR="2009" AND PERIOD="JAN") This is just a simple example for the time dimension. This used to work. But now in SAP BPC 7 SP2 patch 1 this is not working

  • Top Wireless Client Bandwidth Utilization on WCS?

    Hi, there. Can I get the top wireless client bandwidth utilization info / report from WCS? I would like to know how high they can reach, and how many are those 'power users', so far I only find "Busiest Clients" but not quite certain sure about the m