How to get it to start up???
This has got to be easy!
OK, I have downloaded the Sun Java software, and can see that it resides in a directory on my c-drive., viz. c:\j2sdk1.4.2_11. Now how do I actually make it start up? Was there supposed to be an icon created on my desktop that I can click on something??? Seems like they tell you everything except how to make it start!!!
Thanks!
Bewitched & Bewildered
Can you please be a little bit more specific? Which software did you download? If it was Java Studio Enterprise - did you install it? If you did - was the installation successful? If it was - what is the error you are experiencing when trying to start it up?
Thanks,
Kirill
Similar Messages
-
Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How to get the date starting from 1 to the current date from the system dat
Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
call function 'HR_JP_MONTH_BEGIN_END_DATE'
exporting
iv_date = sy-datum
importing
ev_month_begin_date = gv_begda
ev_month_end_date = gv_endda.
Regards,
Ravi
Message was edited by:
Ravi Kanth Talagana -
I had to restart my mac desktop because it froze now I went to restart it and all its doing is beeping at me. Does any one know how to get it to start again Please help
Welcome to the Apple Support Communities
It shows a hardware issue. How many beeps do you hear? See > http://support.apple.com/kb/HT2538 -
How to get a fresh start to successfully install creative cloud for mac?
I start with install creative cloud for download trials, however, since I'm in China, the creative cloud somehow automatically defaults and installs the software in Chinese version(for example, there is no way that I can choose the language of premiere, then it already been installed in my mac system in Chinese). I thought that perhaps it's because my account is set in China, then I try to uninstall all the trials, and try to delete creative cloud from my mac ios platform, but because I'm not familiar with the IOS platform, I think I didn't delete the creative cloud properly, after that, even I successfully install the English version of PRE, the creative cloud couldn't work. And I couldn't open AE v12.0 with mac IOS v10.9.4 unless upgrade AE to v12.0.1, and since the creative cloud wouldn't work, the adobe application manager is also not working. When I try to open application manager it shows this(even though the creative cloud is already installed):
And I download creative cloud again from the URL, try to install, after that, creative cloud is running, but it shows still damaged.
So all in all, how could I fix this crisis circle?
How could my IOS system get a fresh start to install the creative cloud, it's there some files that I suppose to delete or what? Please try to give me a clear instruction with this, there are similar problems with people around me as well, I want to help them, too.
And also what is the difference between adobe application manager and creative cloud?
Look forward to your reply, thanks.Hello,
Please see this link- http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
~Deepak -
How to get the week start date from ISO week number
Hi,
I have a table with the following stucture
Year error Week1 week2 week3 ......week53
2012 error1 2 4 2 1
2012 error2 3 0 1 1I was hoping to get something like select year, error, week1||'Week start date which is a monday of that week' , week2||'Week start date,again monday',....week53 from table
Any suggestions please?
Thanks,
SunHi, Sun,
To see when week N started, add 7 * (N - 1) days to the beginning of the year. (By definition, the beginning of the ISO year is the start of week 1 of the ISO year.)
To see when week 22 of the current year started:
SELECT TRUNC (SYSDATE, 'IYYY') + (7 * (22 - 1))
FROM dual
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using.
See the forum FAQ {message:id=9360002} -
How to get timestamp to start at zero hours?
Hi.
I'm building a software that logs values to excel.
The user can enter how long the test should run for, and the time elapsed should be set as a string in [hh:mm:ss]
The only problem is that the TimeStamp starts at 01:00:00 (beacuase of the 1904-issue i guess). How can I get the counter to start at 00:00:00, or maybe subtract the one hour in the begining so it starts at zero.
If you run the VI you'll understand what I mean.
Thanks!
Is my avatar the dog from the fraggle rock?
Solved!
Go to Solution.
Attachments:
forum_program1.vi 26 KBHi auto,
you have to use relative time instead of absolute time - see attachment...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
forum_program1.vi 27 KB -
How to get password off start up?
How do I get rid of the password at start up?
Hi John ...
Open System Preferences > Users and Groups then select the Password tab.
Click the lock icon (bottom left corner of the pane) to make changes.
Select your user name from the pop up menu next to: Automatic Login
Click the lock. -
How to Get GPS to Start on Start up?
I would like to have the GPS service start on start up. I have a location service that only works when the GPS is on. However GPS only starts when I urn on a app that uses the service. I would like to have it turn on when I start my Razr.
There are multiple apps you can install on the RAZR from the Play Store.
These would include, but are not limited to, Android Lost, Find My Friends and Lookout Security & Antivirus. -
How to get users to start with the first episode?
I checked my stats today and found that the most recent episode of my podcast is the one the has been hit waaay more than any of the others. But I'd really prefer listeners hit the first episode first. Do other podcasters find this? Is it worth re-ordering the dates in the feed to get the fist episode to come up first in the list?
G4 Mac OS X (10.4.3)Actually, you can change the order of items in the RSS feed without changing any of the dates or other info that is within a given item.
Select the episode you want first, cut it and then paste it at the top of the list right after the general feed info. Re-order all your episodes this way (oldest at the top, newest at the bottom). This way, if someone double-clicks the name of your feed episode 1 will be the one they get.
Also, in many podcast lists your episodes are listed in the same order in which you have placed them in your RSS feed
So you just re-arrange the items, but don't change the info in the items.
G5 dual 2.7 Mac OS X (10.4.2)
G5 dual 2.7 Mac OS X (10.4.2) -
Windows 7: How to get iTunes to start minimized on boot
I just got a brand new Windows 7 machine, and installed itunes. I see no option for having it start on boot anywhere in the preferences. I know I can add an itunes shortcut to my startup folder, but this causes the program to start with it's window open. I've tried setting the property to start minimized, but iTunes seems to ignore it.
Install Windows using Boot Camp Assistant. Register it. Install Parallels and configure it to use the Boot Camp installation of Windows as the guest operation system. Register Windows in Parallels. If the online registration does not work use the telephone registration. It is an automated system that will give you a second registration number. If the telephone system does not work for you call the registration assistance number. They will give you a new key for your Parallels Windows.
The reason you need to register twice is because Windows uses your hardware configuration to identify what computer it is installed on. When you use Windows in Parallels, Parallels creates virtual hardware that appears different than the hardware used during the Boot Camp installation. So Windows thinks it is installed on two different computers. Once the registration is performed with two different keys (free of course) then you won't have any problems.
You will need to go through this double registration for Microsoft Office as well if you install it. -
Just tried to upgrade to SnowLeopard with newly purchased software disc. iLife failed to download and when I tried to restart the computer, it will not do so--just get a grey screen with the lines going around and around. Any ideas about how to get it to start?
Mac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD -
How to get labVIEW to recognize DaqBOOK 2000A from Iotech
I've just setp my hardware and software. Does anybody now how to get LabView to start "talking" with this IOTech product, DaqBook 2000A or similiar IOTech hardware?
You can get the Agilent drivers from Agilent - where else?
Once you have installed the drivers, in MAX you have to enable tulip support for the non-NI controller to be recognized. Expand the software listing, select NI-VISA, select the VISA Options tab, select General Setting>Passports. Check the box for NI-VISA Support for Tulip.
p.s. It's not a 'cord' or 'wire'. It's a GPIB controller. There are numerous GPIB tutorials available on the web. You should google that before you start doing any LabVIEW programming. -
Getting a replacement start up disk for imac
How to get a replacement start up disk for my imac?
I lost the original startup disk and the mac didn't start up, only with "?" folder.Call Apple technical support. They can probably sell you a new set of the original disks for a reasonable fee, if your iMac did come with installation disks (Macs that shipped with OS X 10.7 or 10.8 did not come with disks).
Regards. -
On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed
Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You
Maybe you are looking for
-
Help needed to setup template item list to send attachement within email te
Hi! I read everything there was in the bookshelf on the setting of template on Outbound communication, advanced template and my main concern, template items list and I still can not send a template email with an attachment inside. I managed to send t
-
Hi, Please guide i sve username="kpsoft/mahemd". It has write suceesfully but when try to read, this error raised "The '\' character, hexadecimal value 0x5C, cannot be included in a name. Line 1, position 29.". Please guide me.
-
I've recently upgraded from Photoshop Elements 10 to Photoshop Elements 13 and the selection tool dragging this little box behind it whenever I make a selection or move a selection is highly irritating. I tried to google for how to not have it shown
-
How to make a switch if i plug my ipod to other computer ?
Hi everyone, I have an ipod which already contains a lot of songs. I would like to plug my ipod to my new computer which itunes is installed without any song. My problem is, i know when i plug my ipod to the computer, the itunes will warn me my ipod
-
Installation of Migration Assistant
I've just installed the Migration Assistant and I see the mySQL plugins, but how do you migrate from T-SQL? The setup routine only looks at what plugins installed, yet I don't see T-SQL or MS Access. What am I doing wrong?