How to get Itunes to actually work? cant use it. Help
Since upgrade nothing is working right. It doesn't recognize my iphone or ipad, evrything that I need to do is grayed out where I cant use it. What is the use of having this if it isnt going to work? It doesn't sync, won't let me restore from backup. Totally worthless now.
Alternatives for Help Resetting Security Questions and Rescue Mail
1. Apple ID- All about Apple ID security questions.
2. Rescue email address and how to reset Apple ID security questions
3. Apple ID- Contacting Apple for help with Apple ID account security.
4. Fill out and submit this form. Select the topic, Account Security.
5. Call Apple Customer Service: Contacting Apple for support in your
country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID
Similar Messages
-
Can't get popup window to work, could use code help.
This is the first time I've tried to open a popup window in
flash, and I can't get it to work. The site I'm building has the
navigation buttons contained in an animated movie clip. All of the
navigation buttons work fine. But there's a link that the company
wants me to add that opens a window to another site who hosts a
video commercial for the company (it has to be a link to the other
site, it can't be added directly to the customers site).
The link the other company sent me is for javascript (I'll
include it in the attached code), and the code works great if I
just insert the javascript in the html. But I wanted to try and get
the link in the Flash menu. I've tried several versions of the
code, from applying it directly to the button to naming an instance
of it and attaching the actionscript in the movie clip. When I'm
done, I get two different problems. On my XP machine, I get a
warning error about the flash trying to open something to another
server. On my Vista machine, nothing happens at all.
Anyway, I'm including the original javascript and several
versions of the actionscript I've tried (with the actual site
information replaced with "fakeurl.com", wasn't sure how these
forums felt about including site info). Any help at all would be
greatly appreciated. I've searched and searched for about a week,
and I'm tempted to just do away with the Flash button and use a
cheesy javascript button for this one link.
Thanks!
MoAttIn article <[email protected]>,
[email protected] wrote:
> All I want to do is have a Close Window link in my popup window that works.
Select your text that you want to act as a trigger to close the window,
just as if you were going to create a link.
Then paste the following line of code into the link Inspector:
javascript:self.close();
That should do the trick.
Cheers Martin -
How to get iTunes Match to work on iPhone 4?
subscribed to iTunes Match, it reviewed my entire music library, did everything it was supposed to do on my desk computer and iTunes Match is turned on and active. When I go to iPhone 4 Settings>Music and set the iTunes Match toggle to 'On', it says I am not subscribed to iTunes Match and I should return to iTunes on my computer to subscribe.
How did you get them to match? When I try to change from [email protected] to [email protected] on my iPhone 4S it keeps going back to the [email protected] setting.
-
It's good to see 'Random' return in the transition menu when playing album slideshows.....unfortunately you can't select it!?
That's not completely true, you can select it, but it ignores your selection & reverts to the previous chosen one (even when you tick 'Use options as default').
After upgrading to '09 & subsequently loosing the 'Random' option, I changed all my albums to use the dissolve transition. So after updating to 8.0.2 today I got all giddy when I noticed that we'd got 'Random' back. I prepared myself for the laborious task of going through all my albums & changing the settings (yet again). But only if it were that simple............
The only way to select 'Random' is to choose another transition first (eg. cube), tick 'Use options as default', then play. Then, re-enter the settings & change the transition to 'Random', tick 'Use options as default', then play. If all went well it should now display randomly.
Even Frontrow plays them randomly again. It still ignores the specified delay time, but hey....you can't have everything
Whether this update has fixed the forgetting chosen music problem I've been suffering from, only time will tell, it usually takes a few restarts for that one to show upTD.......Just for a laugh I tried your customary cure all response, as expected it didn't change anything
I've got 3 machines here (with different libraries) that are all exhibiting the same problem, so it looks like you're lucky if you're not effected by it..........or am I just the very unlucky one?!?!?!? -
After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?
See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
How do I get iTunes 11 to work as the old iTunes did in this respect: after playing a song in one playlist, I click on another playlist, highlight a song, press play, and get the result of that song playing & that playlist continuing? As it goes now, one clicks on the song in the new playlist where the arrow is and then chooses 'Play Song Next.' So, it plays next, but then the song after that is back in the old playlist. I want to use iTunes smoothly without the extra clicks I've had to do in order to get the playlist to continue. This is music for background while I play the violin at restaurants, and extra clicks and hassle is quite unappreciated, especailly since it worked fine in the previous iTunes.
Thanks.At the top of the playlist where it shows the playlist title and the number of songs, there are two icons. Click the "play" triangle to add the entire playlist to "Up Next", or the "shuffle" symbol to do the same thing but in random order. But the currently playing track will stop playing, and all the songs in "Up Next" will be removed (replaced by the ones from this playlist).
If you hold down the "option" key while clicking those icons, the currently playing song will continue playing, and the new playlist will be added to "Up Next" (above the songs that were already there). -
itunes account is under a comcast address along with all my 8000 + tunes, my .me address is not connected to the music. how do I get itunes match to work for my iphone
U.S. Cellular does not unlock iPhones: iPhone: Wireless carrier support and features - Apple Support
Sell the iPhone to someone that wants to use U.S. Cellular, and use the proceeds to purchase an iPhone that is usable on the wireles carrier you prefer. -
How can i get itunes store to work?
When I try to login to the iTunes store, nothing happens. How can I get iTunes store to work?
have you tried to troubleshoot the conection to the itunes store to see if it will work?
maybe the login servers are down, might have to try later. -
i had this problem when trying to purchase
the funny thing is i purchased and suddenly stopped, i tried to find the apple store contact " Email " but i couldn't
it shows :
please contact itunes support to complete this transaction
i live in bahrain and in bahrain i cant get the help only on specific contries in asia
i searched for all the solution in discussion board still nothing is working on for me ,
how i get itunes support ? i need to purchase
notice : i tried from the computer its showing the message
help pleasehttps://www.apple.com/support/contact/
-
I've lost a load of notes, but dont know why or how to get them back. I cant find the folder that is in my Yahoo account that people have suggested might be the location for the messages. I recently signed into iCloud for the first time. Any idea how to get the notes back? I really dont want to lose them.
It should keep asking for the password, because it's trying to check for purchases... As soon as you login, it will see you have pending downloads and create the downloads section on the left below Purchases under the Store section. Then it will start the music downloads there, as they will be listed one below the other.
You could just try to check your account balance or view your account and that will trigger a password request too. You can just click on that and say that now iTunes keeps asking for the password and ask him to help you with that. Trick would be to interrupt him so that he carries on with another task after, so he doesn't notice the download. Or you carry on with email or browsing which you were "busy" with when iTunes interrupted you for the password (stupid iTunes) -
Anyone know how to get iTunes to launch on startup and minimize itself?
Anyone know how to get iTunes to launch on startup and minimize itself?
have you tried adding iTunes to your login items via system preferences > accounts > login items and checking the little box next to it
if this doesn't work, see the last post in this discussion. -
Update to kichat: FAQ 2 - How to get my router to work with iChat?
kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008 -
I cannot get a recently purchased iPod Shuffle to be recognized in iTunes (which I sync my iPod Touch with). Does anyone know how to get iTunes to recognize it?
Try here > iPod shuffle troubleshooting and service FAQ
See: My computer doesn't see my iPod shuffle -
I right clicked my iPod on iTunes and clicked restore from back up because i thought it would undo my IOS6 update. IT DELETED ALL MY PICTURES (2,000) AND I DON'T KNOW HOW TO GET THEM BACK!!!! Please help me!!!!!
Well, if you have not backed them up, they are gone.
Next time, when you have important material in only one place, back it up. -
No doubt it is something really obvious that I'm missing, but I cannot get iTunes Dj to work. If I click on iTunes DJ in the left column, right section of the window says "iTunes DJ" and explains that I can make a continuous mix, but there is no list of music. The play button is greyed out.
The help file says "To select a specific playlist (instead of your library) for the live mix, choose an option from the Source pop-up menu at the bottom of the iTunes window."
but there is no Source pop-up menu at the bottom of the iTunes window.
Any ideas?Do you see the grey bar at the bottom of the screen when you select iTunes DJ, the one with the Settings and Refresh button, as seen in the picture on this web page? If not, then the bottom of the window may just be off the screen on your system so you don't see the Source selector. If that does seem to be the problem, try changing the resolution of your Mac's screen (Displays system preference) to the highest resolution. If it already is, try changing it to a lower resolution, then back. That may get the iTunes window to reappear..
If not, open the Script Editor application, paste in the following text (up to and including the line that says "end tell") and click the "Run" button:
tell application "Finder"
set {d1, d2, d3, d4} to (get bounds of window of desktop)
end tell
tell application "iTunes"
set margins to {d1 + 10, d2 + 54, d3 - 10, d4 - 148}
set bounds of window 1 to margins
end tell
If the iTunes window is running off the screen, that should restore it.
Hope this helps.
Maybe you are looking for
-
I turned off my macbook and when i tried to log in again it kept freezing
I turned off my macbook and when i tried to log in again it would just freeze after typing in my password. I logged into the admin account and that worked fine but a message popped up saying something about refresh and so i hit that i've also acciden
-
Defining a maximum file size in Archivelink
Hi All Is it possible to set a maximum size of documents uploaded through SAP Archivelink? I personally havent come across any configuration table where this can be put in. Is custom development the only way to set a maximum limit? Regards Joy Kaushi
-
Versamail error and Gmail access Issue
I have been using my e-mail button on the front of the Palm Centro to access the gmail account I set up. I opened a new gmail account and wish to use that. I edited the gmail account information on my phone through Accounts. However, everytime I try
-
Can I install photoshop CS5 on a PC with an intel Core i3 processor?
Can I install photoshop CS5 on a PC with an intel Core i3 processor? Will it run?
-
Windows-like path when installing AIA 2.0 on Linux server
Hello, When installing AIA 2.0 on a RHEL 4.7 Linux, I can see those strange lines into the installActions logs: [exec] bsrPublishShippedIntegScen: [exec] [exec] 28 mai 2009 09:13:45 oracle.adf.share.config.ADFConfigFactory findOrCreateADFConfig [exec