How to get Iweb on OS 10.9.2? and where to download?
I build some sites on my old Imac, and now I would like to go on maintaing the sites on my new Macbook pro. How to do that?
Hi there --
I too have iWeb (3.0.4.) on Mavericks (10.9.2). The last couple updates I made to my site went without a hitch, but now some images are not making it onto the site -- If you care to take a look, you'll see immediately what I mean.
What I don't understand is, software is software -- even if I'm using an outdated, almost obselete program, shouldn't it function as it always has if I publish to a folder, then use FTP (Transmit) to upload to my host??
In other words, is this image problem iWeb's fault??? (keeping in mind, I did kind of a test upload on my Spanish biography page, and the picture of the flag turned out just fine!)..... That is my main question :-)
I'm in the midst of fooling around with EverWeb, and I think I could put up with it, but at this point I think I'd better step awaaaaay from the laptop, as I am about to throw it out the window. My most basic question is, why does EverWeb view a page like, say, an upright piece of paper instead of a computer screen (like in iWeb). Does that make any sense? Anyway, that's what I'm missing so far -- being able to see the page I'm creating as it will look on the browser, and also some advanced image tricks like masking and instant alpha, which I used on my title page (if you're curious)
I don't really speak computer-ese, but I have managed to create what I think is a pretty awesome website with practically NO computer savvy using iWeb. Heck, I'd pay 80 bucks for it any day, if it meant not having to teach this old dog new tricks!
I'd appreciate any opinion you might have on my image bug! Thanks in advance for any replies
p.s. I'm beginning to regret updating to Mavericks. The new iMovie is *nothing* like the one before it; and (see above: old dog) when I continue to use the old version, some functionality is missing. Grrrr.... woof woof
Similar Messages
-
I am using the window xp and firefox 6.
I watch the youtube videos online.
How I get that video from the catch folder and where that catch folder are situated in the window xp.''How can I view or retrieve a video from Firefox's cache''
To actually view/retrieve the file from the cache and its web address you can use
the "Cache Viewer" extension 32.8KB
* https://addons.mozilla.org/firefox/addon/cacheviewer/
* http://dmcritchie.mvps.org/firefox/firefox.htm#cacheviewer
For you to be able to view the cached file you would have had to have watched the entire file.
The latest version of the extension is 0.7b available in all versions you would have to override compatibility by any of these methods
* checking or pick up one of the xpi versions in the reader comments for Firefox 6.0
* extensions.checkCompatibility.6.0 set to False
*: http://kb.mozillazine.org/Extensions.checkCompatibility
* or with an extension "Add-on Compatibility Reporter" (84.0 KB) seems preferred in this group
*:https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
There are also extensions such as Video downloader 132.8 KB
* Download YouTube Videos + Flash Video Downloader / Download-Helper
*:https://addons.mozilla.org/firefox/addon/download-youtube-videos/
<br><small>Please mark "Solved" one answer that will best help others with a similar problem after you've tried several things.</small> -
I downloaded iPhoto, iMovie and Garage Band separately and I need iWeb for my job.
How to get iWeb individually ? I cannot dowload it from Apple store.
ThanksiWeb is no longer supported by Apple and has been discontinued.
Apple has stopped (ended) support of the iLife suite of apps and only sells new versions via the App Store and iWeb and iDVD are not part of the offerings.
Search the Web for iLife '09 DVD's to get a copy. -
The user profile my appleTV was synced on my computer to no longer works (corrupt). My Apple TV is still synced to that profile and all of my recent purchases are going to that username. Does anyone know how to get all of the purchased items back and to the new user (same computer)? I created a new user on my computer and moved the itunes folder to the desktop but never changed the path to which the apple synced to. Now I can only see old items I purchased before the user profile went bad. PLease help!
Welcome to the Apple Community.
Changing the library the Apple TV is synced with will delete all synced content from the Apple TV, but it won't delete purchased content.
You should be able to change the library, resync any content you want and transfer your purchases back to the new library. -
Im making a wedding video and cant figure out how to get the bridal music off my itunes and onto my computer.. Im using the windows movie maker
Marian,
Let's be clear on one thing here. The manual setting is an iPod setting, not an iTunes one. So, once you've set it to manual (and you appear to have done that correctly), then you can connect it to any number of computers without changing that setting.
"The grey thing occurs on one pc only"
This is the thing that I don't understand, if your iPod is set to manual, then it shouldn't happen on any computer. If you connect the iPod that is set to manual to this pc, and then click on it in the source listing, then you would be looking at the songs on the iPod, and they should not be greyed out. When you connect to the "other pc" under these same circumstances, they are not greyed out? -
Bridge CC keeps crashing on start up but was working last week - Any Ideas how to get it back. Have tried uninstalling and re installing software. All other CC software working fine (Mac)
Also some problems since the CC2014... For me i can launch bridge but the crash occurs when i try to change access to any bridge preference... i open a discussion about it
-
How to get the query result of improvement (Before and After ) using sql de
how to get the query result of improvement (Before and After ) using sql developer.
Check
http://www.oracle.com/technetwork/articles/sql/exploring-sql-developer-1637307.html -
How to get the link between mara, ausp, cawn and cawnt tables
hello ABAPERS
i have got a requiremet in that i have to get the relation .
how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp and mara tables.
I would be very thankful for ur help in advance.
Thanks & Regards.
soniHi,
Sample report using the linkage between tables;
report batch_char no standard page heading
line-size 132
line-count 58(1)
message-id mm.
Report by Batch Characteristic *
Description : Report by Batch Characteristic *
Declaration for Tables
tables: mara, " Material Master
mard, " Storage Location Data for Material
t001w, " Plants/Branches
t001l, " Storage Locations
cabn, " Characteristics
inob. " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023', " Class Type
c_obtab like inob-obtab value 'MCH1', " Database Table
c_flag type c value 'X', " Flag
c_c23 type i value '23', " Ratio
Constants for Ratio Categories
c_13 type p decimals 2 value '13.00', " For Ratio 13
c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
c_15 type p decimals 2 value '15.00', " For Ratio 15
c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
c_17 type p decimals 2 value '17.00', " For Ratio 17
c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
c_19 type p decimals 2 value '19.00', " For Ratio 19
c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
c_21 type p decimals 2 value '21.00', " For Ratio 21
c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
c_23 type p decimals 2 value '23.00', " For Ratio 23
c_g23(4) type c value '>=23', " For Ratio >=23
c_ratio(5) value 'RATIO', " For Ratio
Constants for Storing Selected item field information
c_cursor1(15) value 'I_OUTPUT1-MEINS', " For Selected Base
" Unit of Measure
c_cursor2(15) value 'I_OUTPUT1-MATNR', " For Selected Base
" Material Number
c_cursor3(15) value 'I_OUTPUT1-MAKTX', " For Selected Base
" Material Des.
c_cursor4(15) value 'I_OUTPUT1-CLABS', "For Selected Base
" Stock Value
c_cursor5(15) value 'I_OUTPUT1-ATFLV', " For Selected Base
" Char.Value (Ratio)
c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c, " Flag
g_clabs1(16) type c, " Quantity
g_clabs(18) type c, " Quantity
g_cursor(15) type c, " Cursor field name
g_matnr type mara-matnr, " Material Number
g_werks type mchb-werks, " Plant
g_atinn(30) type c. " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
matnr like mchb-matnr, " Material Number
werks like mchb-werks, " Plant
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Unit of measure
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
atinn like ausp-atinn, " Char.Value
clabs like mchb-clabs, " Stock Value
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
werks like t001w-werks, " Plant
name1 like t001w-name1, " Name
end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
matnr like makt-matnr, " Material
maktx like makt-maktx, " Description
end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
objek like ausp-objek, " Object No
atinn like cabn-atinn, " Characteric value
atflv like ausp-atflv, " Characteristic Value
end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv like ausp-atflv, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv(32) type c, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output1.
Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
s_lgort for t001l-lgort, " Stor.Location
s_matnr for mara-matnr obligatory, " Material No
s_atinn for cabn-atinn. " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
select werks
into t001w-werks
from t001w
up to 1 rows
where werks in s_werks.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Plant'(002).
endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
select matnr
into mara-matnr
from mara
up to 1 rows
where matnr in s_matnr.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Material'(003).
endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
select lgort
into t001l-lgort
from t001l
up to 1 rows
where lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Storage Location'(004).
endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
select atinn
into cabn-atinn
from cabn
up to 1 rows
where atinn in s_atinn.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Characteristic Value'(005).
endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
into (mard-matnr, mard-werks, mard-lgort)
from mard
up to 1 rows
where matnr in s_matnr and
werks in s_werks and
lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform. "validate_screen
*& Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
exporting
repid = l_repid
heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18) 'Material Number'(008) centered,
20 sy-vline, 21(40) 'Material Description'(011) centered,
61 sy-vline, 62(22) 'Ratio'(009) centered,
84 sy-vline, 85(18) 'Quantity'(010) centered,
103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform. "get_headings
*& Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr " Material Number
b~werks " Plant
b~lgort " Storage Location
b~charg " Batch Number
b~clabs " Stock Value
a~meins " Base Unit of Measure
into table i_mchb
from mara as a inner join mchb as b
on amatnr eq bmatnr
where b~matnr in s_matnr and
b~werks in s_werks and
b~lgort in s_lgort.
if sy-subrc <> 0.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform. " get_mat_stock_data
*& Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
clear i_plant.
refresh i_plant.
select werks " Plant
name1 " Name
into table i_plant
from t001w
for all entries in i_mchb
where werks = i_mchb-werks.
Get the Material Description from MAKT Table
clear i_makt.
refresh i_makt.
select matnr " Material number
maktx " Material Description
into table i_makt
from makt
for all entries in i_mchb
where matnr = i_mchb-matnr and
spras = sy-langu.
sort i_plant by werks.
delete adjacent duplicates from i_plant comparing werks.
sort i_makt by matnr.
delete adjacent duplicates from i_makt comparing matnr.
endif.
endform. "form get_plant_grp_data.
*& Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
l_tabix like sy-tabix.
if not i_mchb[] is initial.
loop at i_mchb.
l_tabix = sy-tabix.
clear l_matbatch.
concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
read table i_plant with key werks = i_mchb-werks binary search.
if sy-subrc = 0.
i_output-name1 = i_plant-name1.
endif.
Get the Material Description from i_makt Table
read table i_makt with key matnr = i_mchb-matnr binary search.
if sy-subrc = 0.
i_output-maktx = i_makt-maktx.
endif.
Get the Characteristic Values data from INOB and AUSP Tables
clear inob.
select single cuobj from inob
into inob-cuobj
where klart = c_klart and
obtab = c_obtab and
objek = l_matbatch.
if sy-subrc = 0.
select objek
atinn
atflv
from ausp
into table i_ausp
where objek = inob-cuobj and
atinn in s_atinn and
klart = c_klart.
sort i_ausp by objek atinn.
loop at i_ausp.
clear cabn.
select single atinn atnam from cabn
into (cabn-atinn,cabn-atnam)
where atinn = i_ausp-atinn.
if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
if cabn-atnam cs c_ratio.
if i_ausp-atflv between c_13 and c_1499.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_ausp-atflv between c_15 and c_1699.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_ausp-atflv between c_17 and c_1899.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_ausp-atflv between c_19 and c_2099.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_ausp-atflv between c_21 and c_2299.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_ausp-atflv >= c_23.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_23.
endif. " Condition for RATIO values
else. " If characteristic does contain RATIO
i_mchb-atflv = i_ausp-atflv.
endif.
i_output-atinn = cabn-atinn.
i_output-atnam = cabn-atnam.
i_output-atflv = i_ausp-atflv.
i_mchb1-matnr = i_mchb-matnr.
i_mchb1-werks = i_mchb-werks.
i_mchb1-lgort = i_mchb-lgort.
i_mchb1-charg = i_mchb-charg.
i_mchb1-clabs = i_mchb-clabs.
i_mchb1-atinn = i_ausp-atinn.
i_mchb1-atflo = i_mchb-atflv.
i_mchb1-atflv = i_ausp-atflv.
append : i_output, i_mchb1.
clear i_mchb1.
modify i_mchb index l_tabix transporting atflo atflv .
endif.
endloop.
endif.
endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
sort i_output by atinn werks matnr atflv.
else.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform. "append_final_data
*& Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
l_tabix = sy-tabix.
At new Characteristic
at new atinn.
read table i_output1 index l_tabix.
format color 1 intensified on.
write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
23(40) i_output1-atnam,
125 sy-vline.
format color off.
format color 4 intensified on.
write: /1 sy-vline, 2(20) 'Plant Name :'(022),
23(4) i_output1-werks, 29(30) i_output1-name1,
125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
clear: g_clabs, g_clabs1.
format color col_normal.
write :/1 sy-vline, 2(18) i_output1-matnr,
20 sy-vline, 21(40) i_output1-maktx,
61 sy-vline.
if i_output1-atflv = c_c23.
write: 62(22) c_g23 centered.
else.
shift i_output1-atflv left deleting leading space.
write: 62(22) i_output1-atflv centered.
endif.
write: 84 sy-vline,
103 sy-vline,
110(5) i_output1-meins.
If the quantity value is negative
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
hide : i_output1.
new-line.
At end of material
at end of matnr.
sum.
move : i_output1-matnr to g_matnr.
format color 3 intensified on.
write /1(125) sy-uline.
write :/1 sy-vline, 2(25) 'Total for Material :'(012),
28(18) g_matnr.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
write: 125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
At end of plant
at end of werks.
sum.
move : i_output1-werks to g_werks.
format color 3 intensified off.
write :/1 sy-vline, 2(25) 'Total for Plant :'(013),
28(4) g_werks.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
At end of characteristic
at end of atinn.
read table i_output1 index l_tabix.
sum.
format color 3 intensified on.
write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
28(25) i_output1-atnam.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
endloop.
endform. " display_report
*& Form DISPLAY_BATCH
Display the batch details for the seclected material *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
g_cursor = c_cursor2 or
g_cursor = c_cursor3 or
g_cursor = c_cursor4 or
g_cursor = c_cursor5 or
g_cursor = c_cursor6.
format color 3.
write: /1 sy-vline,
2(17) 'Material Number :'(020),
20(17) i_output1-matnr,
94 sy-vline.
format color off.
write /1(94) sy-uline.
loop at i_mchb1 where matnr = i_output1-matnr and
atinn = i_output1-atinn and
atflo = i_output1-atflv.
format color col_normal.
shift i_mchb1-charg left deleting leading '0'.
write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
18 sy-vline, 19(17) i_mchb1-charg centered,
36 sy-vline.
if i_output1-atnam cs c_ratio.
write: 37(29) i_mchb1-atflv
exponent 0 decimals 2 centered.
else.
write : 37(29) i_mchb1-atflv
exponent 0 decimals 0 centered.
endif.
write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
94 sy-vline.
format color off.
endloop.
write /1(94) sy-uline.
else.
message s899 with 'Invalid cursor position'(016).
exit.
endif.
endform. " DISPLAY_BATCH
*& Form HEADING_SECLIST
Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
18 sy-vline, 19(17) 'Batch Number'(017) centered,
36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
66 sy-vline, 67(27) 'Quantity'(019) centered,
94 sy-vline.
write /1(94) sy-uline.
format color off.
endform. " HEADING_SECLIST
*& Form COLLECT_RATIO
Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
clear g_atinn.
i_output1-atinn = i_output-atinn.
i_output1-atnam = i_output-atnam .
i_output1-werks = i_output-werks.
i_output1-name1 = i_output-name1.
i_output1-matnr = i_output-matnr.
i_output1-maktx = i_output-maktx.
i_output1-clabs = i_output-clabs.
i_output1-meins = i_output-meins.
call function 'CONVERSION_EXIT_ATINN_OUTPUT'
exporting
input = i_output-atinn
importing
output = g_atinn.
if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
if i_output-atflv between c_13 and c_1499.
i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_output-atflv between c_15 and c_1699.
i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_output-atflv between c_17 and c_1899.
i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_output-atflv between c_19 and c_2099.
i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_output-atflv between c_21 and c_2299.
i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_output-atflv >= c_23.
i_output1-atflv = c_23.
endif.
write i_output1-atflv to i_output1-atflv .
else.
write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
endif.
collect i_output1.
clear i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform. " COLLECT_RATIO
Reward if useful..
Regards,
Anji -
How to get the link between MCH1, AUSP, CAWN and CAWNT tables
Hi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
KumarHi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
Kumar -
so my computer crashed and i had lost all my itunes purchases and dont know how to get them back, so my computer crashed and i had lost all my itunes purchases and dont know how to get them back
You have a backup of your computer, or at the very least of your iTunes media, correct?
Simply copy your backup of your iTunes media into the iTunes library on your new computer.
Connecting and syncing your device to the new computer without first recovering your iTunes media is a really, really, really bad idea. iDevices are designed to ONLY sync with one computer. When you plug your device into a new computer, it will wipe all media on the device when it syncs. The only media you may be able to salvage and transfer to the new computer would be anything bought directly on the device.
If you do not have a backup of your iTunes media, then you will want to either look at a way (using software from a third party company) to either extract the media from you iDevice or your old computer (assuming the hard drive is not toast). -
How to get Music Player to play AAC files and show...
I feel the need, the need to share my recent experiences with you! Firstly to restate the already known facts: The Nokia Audio Manager in PC Suite is incapable of reading any tags as far as I have seen, from a tag (AAC/MP3) or from a CD itself and it crashes on my pc after sending 2 albums to my phone or on initialising once the phone has 2 albums already on it - so I've binned that. iTunes creates .m4a files which are AAC files but in mp4 containers with mp4 tags. The N70 will play AAC files and read ID3 tags up to v2.3 Here's how to get musak on your N70 with tags and artwork. 1. get yourself copies of dbpoweramp 11.5, their AAC codec (the Release 5 one) and The Godfather and install them 2. Go into the dbpoweramp config, select the ID tag tab and change the tag to ID3V2 for AAC. check the version field is set to v2.3 3. Use Poweramp's CD Input to rip a CD (you can specify under options to use AAC (Advanced Audio Coding (CLI)), you can custom the folder/filenames and set the bitrate (I use 100 BVR which creates files about the same size as MP3) 3.5. Rename any file that has an apostrohpe in the filename - removing the apostrophe - as the Music player will not read the tag 4. Go onto Amazon.com, find your CD and save the artwork image to your PC (create a folder for artwork) 5. Run The Godfather, select the folder containing the ripped album, click on the 'TAG' button, tick the picture box and click the button to it's right and browse for the .jpg file you just downloaded. then click on Update which will bring up the edit dialog, check that the picture is visible at bottom right and is ticked and then click 'Update All', then 'Sync' and then 'Exit'. Finally, click on the 'Apply' button 6. Transfer the folder to your My Music folder on the MMC 7. Run the Music Player and select Options-Update Collection 8. Now go into Albums and you should see your album title. Click on it and you should see all tracks. Click on a track and you should see, in the playing window, the artist & track and the artwork too. It has taken me weeks to get this far but for me, it is worth it. I hope this system works for you too Regards, Brian.
It sounds like a dud program. I would remove it (highlight its icon, then Options -> Remove). If you don't see a remove option, look for the program in the Application Manager.
-
My Mac Mail says that I have a plug in missing. How do I know which plug in is missing and where do I get it?
Does this happen ONLY with Mail? Could you close all other applications and open Mail and check again? If this is still happening, please post a screenshot here.
-
My billing address is correct, but the i keep getting that my security code is incorrect and can't download apps. I have re-entered all of my information in my account, but still get error message. How to over-ride?
If you have American Express, your 4-digit security code is on the front. If you have VISA or MasterCard, your 3-digit security code is outside the signature block on the back of your credit card. It happens to me also.
-
How to get STPOV structure values using BOM number and Plant number
hello All,
could you please help me out
'How to get STPOV structure values using BOM number and Plant number'
is there any function module where can i give input as bom and plant number .
waiting for your response.
regards
srinivasI did a quick where-used lookup in SE11 on the structure STPOV in function module interfaces and came up with the following:
Function Module Short Description
CK_F_TOTALCOST_COMPUTE
CS_ALT_SELECT_COUPLED_PRODUCT
CS_WHERE_USED_CLA Bills of material; class use
CS_WHERE_USED_CLA_ANY Bills of material; direct class use or via other class
CS_WHERE_USED_CLA_VIA_CLA Bills of material; class use via classes
CS_WHERE_USED_COP
CS_WHERE_USED_DOC Bills of material; document use
CS_WHERE_USED_DOC_ANY:Bills of material; direct and (indirectly) document use via
CS_WHERE_USED_DOC_VIA_CLA Bills of material; document use via classes
CS_WHERE_USED_KNO Bills of material; use object dependency
CS_WHERE_USED_MAT Bills of material; where-used list
CS_WHERE_USED_MAT_ANY:Bills of material; where-used list as article or class item
CS_WHERE_USED_MAT_VIA_CLA Bills of material; where-used list via classes
EXIT_SAPMC29M_001 BOM; Article Where-Used List
It appears that this structure is primarily used for where-used look-ups for components within the BOM. I don't know if any of these are what you're in need of.
Hope this helps,
Mark Schwendinger -
HT204370 Hi like the music store how to I get to see what movies are available and where ?
Hi like the music store how to I get to see what movies are available and where ?
iTunes Store: Which types of items can I buy in my country?
-
How to get i cloud to show phone numbers and not emails
how to get i cloud to show phone numbers and not emails
In the contacts app the information is as you have entered it. You can include the added information you want for the contacts. Open a contact and tap edit and add the information you want there and then tap done. It soulds to me like Facebook friends who have email addresses only have been merged into your contacts
Maybe you are looking for
-
How do I get my money back for an App I bought yesterday that has crashed?
How do I get my money back for an App I bought yesterday that has crashed?
-
Disk not found while installation.
While installing Arch I get this error. :: Mounting '/dev/disk/by-label/ARCH_201504' to 'run/archiso/bootmnt' Waiting 30 seconds for device /dev/disk/by-label/ARCH_201504 ... ERROR: '/dev/disk/by-label/ARCH_201504' device did not show up after 30 sec
-
When you backup your Ipod touch on a PC, where do your pictures go?
When you backup your Ipod touch on a PC, where do your pictures go?
-
BI Export Library vs. ADS (Adobe Document Services)
Does anybody know why SAP added the Export Library as an alternative to ADS for BI? I mean, are there pros and cons to using one over the other? Right now we're using the Export Library and it seems to work fine for broadcasting and Print View in B
-
[SOLVED] Pacman error: failed retrieving file : No address record
I just installed Arch on a x86 laptop using the cd as the package source. I wanted to do a net install, but when I attempted to (regardless of the mirror) I got many responses from pacman in tty7 of "No address record". This happened despite having a