How to get kitkat update

how to get the kitkat update for the note 3

ALL other US Carriers already have KIT KAT on the Galaxy S4!!! Verizon does NOT, That is a fact!!
Now we know Verizon's intention. NO Kit Kat for GS4's any time soon!! When you look at Verizon's promotion of the GS5 it talks about how great KIT KAT is and how the GS4 DOES NOT HAVE IT, which means it is not coming any time soon!!!!
<<From Verizonwireless.com>>
The operating system
All three smartphones run the Android™ operating system, but different versions. The S III and the S 4 have Jelly Bean, while the S 5 has KitKat 4.4.2.
KitKat employs the latest technology to deliver crisp visuals and a seamless, more immersive experience for you. Launch voice commands with two words, “OK, Google”, and read more easily with immersive mode. The status and notification bars disappear when you’re in certain full-screen apps or games, but, don’t worry, you can bring them back with just a swipe of your finger. Plus, KitKat is the most efficient Android operating system yet, using less power overall while running the same apps and programs.
Verizon GS4 Customers - All other US carriers have given their customers with GS4's (and who pay less for their service) "the latest technology" (as stated above). But us Verizon Customers are left WITHOUT THE LATEST TECHNOLOGY on our "flagship phones"
FIX IT VERIZON!!!!!!!!!!!!!!!!!!!!

Similar Messages

Missing update for a game app after updating ios7 any ideas how to get the update

Went to update a game app this morning, had already hit update when the i os7 update screen popped went through with the ios update but after ipad restarted the game update is completely missing any ideas how to get the update back no luck so far

Hello THEVIN7
The next step if it is not updating, would be to delete the app and then download it again. Check out the general troubleshooting for apps purchased form the App Store.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
-Norm G.

"See how to get instant updates on your phone" Doesn't go away. Help?

In the Facebook app when I click on the notifications it says "See how to get instant updates on your phone" at the top. It doesn't go away from the top unless I enable push notifications for it. However, i don't want that. Help?

There are 3 ways to exit a fullscreen app:
Escape key
Command+Control+F
Hover the cursor at the top of the screen until the menu bar drops down then clcik the Arrow icon on the top right.
Have you tried plugging it back into the TV?

Have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for

have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for her iphone. we need to save her photos, music, etc to ? icloud and the phone stuff to verizon cloud? so when she gets her new Iphone6 she can have all her "stuff" back on the new phone. hope this makes sense. please offer suggestions here or at [email protected] thanks for your help!

Oh no! I'm sorry to see there's a lot of confusion here and data shared, x-rayDon. We can definitely work to fix. This happens when two devices share the same Apple ID, so she will need to reset hers. She can do so by assessing this link Apple - My Apple ID. You will need to decide who will keep the account if want separate Apple IDs since purchases cannot be shared unless you do Family Sharing.
RobinD_VZW
Follow us on twitter @VZWSupport

I have an iBook G4 running on OS X 10.4.11 and I just got a new ipod and can't figure out how to get it updated to be able to sync my ipod PLEASE HELP

I have an iBook G4 running on OS X 10.4.11 and I just got a new ipod and can't figure out how to get it updated to be able to sync my ipod PLEASE HELP

You could go hunting for a fair price on a refurbished or restored Intel-based Mac or MacBook, as most early models of CoreDuo and Core2Duo can run Snow Leopard 10.6.8, and some much more recent.
The Apple Store's Special Deals section that is online has some fairly recent examples of hardware with an OS, original accessories as noted, power cord, and complementary one year coverage. Eligibility for extended AppleCare plans are noted & may be available for various items in the store. Subject to availability. Refurbished. Like new. The price difference can be about the same as the additional two year AppleCare plan may cost, so get that too.
Third party repaired restored or available through other channels vary in quality, quantity, condition, and may be lacking in some or most original accessories; they should include basic hardware as originally equipped and have the boot-install software disc set as intended for that build model & year specification, included.
Auction sites rarely have that much of a kit together, w/ missing discs, scruffy, extra fees, etc. On the other hand, companies that restore and repair Macs for a living and are authorized Apple service centers may have something, if you aren't in the market for something holiday new or really quick. Older models if reasonably refurbished can still shine years later.
Hopefully this helps somewhat.
Good luck & happy computing!

I am a Creative Cloud subscriber. Need latest version InDesign (CS7). How to get that update?

I am a Creative Cloud subscriber. Need latest version InDesign (CS7). How to get that update?

Open the Creative Cloud desktop app running in the task bar. Be sure the Find New Apps section below is set to All Apps.

How to get an updatable ADODB Recordset from a Stored Procedure?

In VB6 I have this code to get a disconnected ADODB Recordset from a Oracle 9i database (the Oracle Client is 10g):
Dim conSQL As ADODB.Connection
Dim comSQL As ADODB.Command
Dim recSQL As ADODB.Recordset
Set conSQL = New ADODB.Connection
With conSQL
.ConnectionString = "Provider=OraOLEDB.Oracle;Password=<pwd>;Persist Security Info=True;User ID=<uid>;Data Source=<dsn>"
.CursorLocation = adUseClientBatch
.Open
End With
Set comSQL = New ADODB.Command
With comSQL
.ActiveConnection = conSQL
.CommandType = adCmdStoredProc
.CommandText = "P_PARAM.GETALLPARAM"
.Properties("PLSQLRSet").Value = True
End With
Set recSQL = New ADODB.Recordset
With recSQL
Set .Source = comSQL
.CursorLocation = adUseClient
.CursorType = adOpenStatic
.LockType = adLockBatchOptimistic
.Open
.ActiveConnection = Nothing
End With
The PL/SQL Procedure is returning a REF CURSOR like this:
PROCEDURE GetAllParam(op_PARAMRecCur IN OUT P_PARAM.PARAMRecCur)
IS
BEGIN
OPEN op_PARAMRecCur FOR
SELECT *
FROM PARAM
ORDER BY ANNPARAM DESC;
END GetAllParam;
When I try to update some values in the ADODB Recordset (still disconnected), I get the following error:
Err.Description: Multiple-step operation generated errors. Check each status value.
Err.Number: -2147217887 (80040E21)
Err.Source: Microsoft Cursor Engine
The following properties on the Command object doesn't change anything:
.Properties("IRowsetChange") = True
.Properties("Updatability") = 7
How can I get an updatable ADODB Recordset from a Stored Procedure?

4 years later...
I was having then same problem.
Finally, I've found how to "touch" the requierd bits.
Obviously, it's hardcore, but since some stupid at microsoft cannot understand the use of a disconnected recordset in the real world, there is no other choice.
Reference: http://download.microsoft.com/downlo...MS-ADTG%5D.pdf
http://msdn.microsoft.com/en-us/library/cc221950.aspx
http://www.xtremevbtalk.com/showthread.php?t=165799
Solution (VB6):
<pre>
Dim Rst As Recordset
Rst.Open "select 1 as C1, '5CHARS' as C5, sysdate as C6, NVL(null,15) as C7, null as C8 from DUAL", yourconnection, adOpenKeyset, adLockBatchOptimistic
Set Rst.ActiveConnection = Nothing
Dim S As New ADODB.Stream
Rst.Save S, adPersistADTG
Rst.Close
Set Rst = Nothing
With S
'Debug.Print .Size
Dim Bytes() As Byte
Dim WordVal As Integer
Dim LongVal As Long
Bytes = .Read(2)
If Bytes(0) <> 1 Then Err.Raise 5, , "ADTG byte 0, se esperaba: 1 (header)"
.Position = 2 + Bytes(1)
Bytes = .Read(3)
If Bytes(0) <> 2 Then Err.Raise 5, , "ADTG byte 9, se esperaba: 2 (handler)"
LongVal = Bytes(1) + Bytes(2) * 256 ' handler size
.Position = .Position + LongVal
Bytes = .Read(3)
If Bytes(0) <> 3 Then Err.Raise 5, , "ADTG, se esperaba: 3 (result descriptor)"
LongVal = Bytes(1) + Bytes(2) * 256 ' result descriptor size
.Position = .Position + LongVal
Bytes = .Read(3)
If Bytes(0) <> 16 Then Err.Raise 5, , "ADTG, se esperaba: 16 (adtgRecordSetContext)"
LongVal = Bytes(1) + Bytes(2) * 256 ' token size
.Position = .Position + LongVal
Bytes = .Read(3)
If Bytes(0) <> 5 Then Err.Raise 5, , "ADTG, se esperaba: 5 (adtgTableDescriptor)"
LongVal = Bytes(1) + Bytes(2) * 256 ' token size
.Position = .Position + LongVal
Bytes = .Read(1)
If Bytes(0) <> 6 Then Err.Raise 5, , "ADTG, se esperaba: 6 (adtgTokenColumnDescriptor)"
Do ' For each Field
Bytes = .Read(2)
LongVal = Bytes(0) + Bytes(1) * 256 ' token size
Dim NextTokenPos As Long
NextTokenPos = .Position + LongVal
Dim PresenceMap As Long
Bytes = .Read(3)
PresenceMap = Val("&H" & Right$("0" & Hex$(Bytes(0)), 2) & Right$("0" & Hex$(Bytes(1)), 2) & Right$("0" & Hex$(Bytes(2)), 2))
Bytes = .Read(2) 'ColumnOrdinal
'WordVal = Val("&H" & Right$("0" & Hex$(Bytes(0)), 2) & Right$("0" & Hex$(bytes(1)), 2))
'Aca pueden venir: friendly_columnname, basetable_ordinal,basetab_column_ordinal,basetab_colname
If PresenceMap And &H800000 Then 'friendly_columnname
Bytes = .Read(2) 'Size
LongVal = Bytes(0) + Bytes(1) * 256 ' Size
.Position = .Position + LongVal * 2 '*2 debido a UNICODE
End If
If PresenceMap And &H400000 Then 'basetable_ordinal
.Position = .Position + 2 ' 2 bytes
End If
If PresenceMap And &H200000 Then 'basetab_column_ordinal
.Position = .Position + 2 ' 2 bytes
End If
If PresenceMap And &H100000 Then 'basetab_colname
Bytes = .Read(2) 'Size
LongVal = Bytes(0) + Bytes(1) * 256 ' Size
.Position = .Position + LongVal * 2 '*2 debido a UNICODE
End If
Bytes = .Read(2) 'adtgColumnDBType
'WordVal = Val("&H" & Right$("0" & Hex$(Bytes(0)), 2) & Right$("0" & Hex$(bytes(1)), 2))
Bytes = .Read(4) 'adtgColumnMaxLength
'LongVal = Val("&H" & Right$("0" & Hex$(Bytes(3)), 2) & Right$("0" & Hex$(Bytes(2)), 2) & Right$("0" & Hex$(Bytes(1)), 2) & Right$("0" & Hex$(Bytes(0)), 2))
Bytes = .Read(4) 'Precision
'LongVal = Val("&H" & Right$("0" & Hex$(Bytes(3)), 2) & Right$("0" & Hex$(Bytes(2)), 2) & Right$("0" & Hex$(Bytes(1)), 2) & Right$("0" & Hex$(Bytes(0)), 2))
Bytes = .Read(4) 'Scale
'LongVal = Val("&H" & Right$("0" & Hex$(Bytes(3)), 2) & Right$("0" & Hex$(Bytes(2)), 2) & Right$("0" & Hex$(Bytes(1)), 2) & Right$("0" & Hex$(Bytes(0)), 2))
Dim ColumnFlags() As Byte, NewFlag0 As Byte
ColumnFlags = .Read(1) 'DBCOLUMNFLAGS, First Byte only (DBCOLUMNFLAGS=4 bytes total)
NewFlag0 = ColumnFlags(0)
If (NewFlag0 And &H4) = 0 Then 'DBCOLUMNFLAGS_WRITE (bit 2) esta OFF
'Lo pongo en ON, ya que quiero escribir esta columna LOCALMENTE en el rst DESCONECTADO
NewFlag0 = (NewFlag0 Or &H4)
End If
If (NewFlag0 And &H8) <> 0 Then 'DBCOLUMNFLAGS_WRITEUNKNOWN (bit 3) esta ON
'Lo pongo en OFF, ya que no me importa si NO sabes si se puede updatear no, yo lo se, no te preocupes
'ya que quiero escribir esta columna LOCALMENTE en el rst DESCONECTADO
NewFlag0 = (NewFlag0 And Not &H8)
End If
If (NewFlag0 And &H20) <> 0 Then 'DBCOLUMNFLAGS_ISNULLABLE (bit 5) esta OFF
'Lo pongo en ON, ya que siendo un RST DESCONECTADO, si le quiero poner NULL, le pongo y listo
NewFlag0 = (NewFlag0 Or &H20)
End If
If NewFlag0 <> ColumnFlags(0) Then
ColumnFlags(0) = NewFlag0
.Position = .Position - 1
.Write ColumnFlags
End If
.Position = NextTokenPos
Bytes = .Read(1)
Loop While Bytes(0) = 6
'Reconstruyo el Rst desde el stream
S.Position = 0
Set Rst = New Recordset
Rst.Open S
End With
'TEST IT
On Error Resume Next
Rst!C1 = 15
Rst!C5 = "MUCHOS CHARS"
Rst!C7 = 23423
If Err.Number = 0 Then
MsgBox "OK"
Else
MsgBox Err.Description
End If
</pre>

How to get automatic updates for P750 custom build

I recently purchased a custom built P750 and want to sign up for automatic updates. There is no option for just a P750 which is my complete model number.
8GB ram
I7 2.20GHz
Windows HP SP1 with all updates installed at this time.
How can I get automatic updates for this machine and operating system and if so, how do I get signed up for those?
Should I just choose a model number and pretend it is the model I have? Which number should I choose?
Jon
Solved!
Go to Solution.

Satellite P750 (PSAY3U-0RF03H)
All computers in the same part-number family (PSAY3U) are essentially the same. The drivers and utilities for this one should work.
Satellite P750-BT4G22 (PSAY3U-08703H)
So go here.
Hmm. Not many there. So let's go to the equivalent part-number family in Europe (PSAY3E).
Get those here.
Lots of ways to wiggle.
-Jerry

How to get idvd updates

I have idvd 4.0.1 and want to update the latest version, but can't figure out how to get it.
Any ideas??

If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

How to get the update file without using Nokia Sof...

The network connection is unreliable and downloading the firmware update using PC Suite for my Nokia E90 proves difficult. Does anyone know how I can get the firmware version 300.34.84?
The trouble is Nokia's Software Updater does not accommodate any slight interruption to the connection during the update process. I will update this discussion with what version of PC Suite I have once I get that info.
Any help is kindly appreciated

In fact, it is not Possible to get the update file without using Nokia Software Updater or you should search the net to find the update files in another place and even you get them, you can not use them with NSU.
You can Update your Device with:
1 - NSU (Nokia Software Update)
2 - FOTA (Firmware Over The Air) for FP2 devices ONLY.
3 - Nokia Care Center
there is not other way to upgrade.
Hope useful for u.
regards
Nokia N79 4GB
SW Version: 32.001 RM-348 MEA

How to get only updated records for a column using loading type INSERT

Hi,
Good morning all,
I have source1 containg 3 columns bill_cd,bill_desc,bill_date and
source2 has the columns bill_cd,bill_key,source_id.
My target has the columns bill_cd,bill_date,bill_desc .
Now the requirement is, bill_cd in target should not repeated when we run the mapping more than one thime. it should get only updated records not the previous records using only INSERT Loading type(for target) not to use update/insert.
How can we achieve this logic in mapping level.
Anybody Please give me some solution immediately.
Thanks in Advance,
Siv

Thanks Herzog for your reply,
Here bill_cd is not unique. Yes,I want only new records using INSERT as loading type. Suppose when the map runs for the first time, bill_cd is loaded with values 1 to 5.
Now, in the source I have got new records 6 to 10 for bill_cd and when I run the mapping again I need to get only records for bill_cd from 6 to 10 using INSERT as loading type.
Is it possible to achieve this at mapping level?
Regards,
Siv.

How to Get Free Update OS 10.8.3 for Macbook Air MD223

I Bought new macbook air MD223, with OS 10.7.5.
Why i dont get free update to OS 10.8.3?

Welcome to the Apple Support Communities
If you have just bought your MacBook Air, you may be eligible to upgrade to OS X Mountain Lion for free > http://www.apple.com/osx/uptodate
You aren't seeing the OS X 10.8.3 update because you have OS X Lion, and that update is paid if you have OS X Lion installed

I have an update required for Evernote in my Imac app store, but cannot find how to get this update. It says to sign in with my emailm address, but I cannot find a way to do this. Please help!!

I recently downloaded Mlountain Lion on my Imac. It shows that I have an update for Evernote that should be downloaded, but I cannot find out how to complete this update. It asks for me to sign in with my email address, but does not show how to do this. Please help!

I have done exactly what you said. When I check "update", a screen drops down that asks that I enter my email address to continue........but i cannot find any way to do this.
In the past, all I would do is check "update", and the update would take place. Since I upgraded to Mountain Lion, this has changed, and i do not know how to do this simple thing.......the app store shows an update is due to be updated, but i cannot find out how to do it.

Applied SOA patches (server), how to get patches/updates into JDeveloper?

Hi
We have recently applied the 10.1.3.3.1 MLR5 patch to our SOA Suite installs. In this there is a bug 5883401 listed as being resolved by the patchset.
We have logged an SR to find out the details of the bug (as it is once again not visible to us mere customers paying good money for support).
From this it became clear that the fix for this bug is really a JDeveloper (XSL Mapper) fix.
Oracle Support has so far been unable to help us with the information on how to get this fix (or any other fix) applied to JDeveloper. (we are using JDeveloper 10.1.3.3.0 build 4157)
Can anybody in this forum please shed any light onto this matter?
How do we get this fix or any other fixes applied to JDeveloper?
Your help and inputs are much appreciated.

Hi,
i searched for bug 5883401. Can you provide which patch number is associated with this bug?
Is there a jar file provided?

How to get free update iWorks/iLife?

Two years ago I bought my MacBook together with iWorks and iLife online in the Apple Store. On internet, I read that I can get free updates for iWorks and iLife. I tried several ways to get these updates, but the Mac App Store doesn't list my software. I searched the internet for a solution but couldn't find one. Can you help me?
Kind regards,
Otto

iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

How to get kitkat update

Similar Messages

Maybe you are looking for