How to get lg BE14NU40 blue ray burner to work with fcp or compressor

how to get LG BE14NU40 Blue Ray Burner to work with FCP X or Compressor??

Hello Ron,
First up, you don't have to use Compressor to burn a Bluray Disc.
FCP X can do this with it's own built-in software. Compressor of course can do the job.
In my experience some burners work and some don't.
I use an the older version of this burner:
http://eshop.macsales.com/item/Other+World+Computing/MR3F8BDSD16/
It works fine with Mac.
Al

Similar Messages

How do I stop my Blu-Ray burner from "sleeping" or going offline?

I recently installed a PIONEER BD-RW BDR-206 Blu-Ray burner in my Mac Pro. After about an hour or so it apparently goes to sleep or does something where the computer does not recognize it anymore. And I can't do anything to bring it back other than restart the computer.
This poses a significant problem when I use Compressor to burn Blu-Ray discs because Compressor might take 10 hours to process, then when it's done I lose everything because it can't burn the disc because the computer doesn't see the blu-ray burner anymore.
The only way I've found to get around this is to eject and then close the burner every hour or so. That's a good band aid, but not acceptable. Especially when I set to burn overnight or I leave the office for the day.
I've gone through System Settings and do not see anything pertaining to this, but I'd be happy to admit if I've overlooked something to fix this issue!
Please offer any feedback,
Thank you.
Eric P

Thanks Dennis. I believe I did try that option to no avail. After talking with the techs where I got it (MacSales or MacWorld... don't remember off hand now) they said that that particular burner was known for this issue with Macs. They work with Macs, but they have that problem of going offline even if all computer settings say to stay active. I ultimately purchased a different brand burner and now it works no problem.
I also bought a casing for the old Pioneer so that I could still use it.
Thanks,
Eric

Toast 11 and ASUS Blue-Ray burner not working together!

Hey All,
I recently got an ASUS SBC-06D2X-U Blue-Ray burner and found out that little "Mac compatabile" label isn't correct. Had to get Toast 11. Now I have that and the disk spits out still when I try to burn. I don't know what to do at this point. Disks are 4x and burner is 6x, but that shouldn't matter.
Help please!

it has nothing to do with windows or mac..
Your bluray from Asus its COMBO, that model doesn´t record bluray,
ASUS SBC-06D2X-U its bluray combo (read-only blurays )
ASUS SBW-06D2X-U its blurays writer

ATI 3870 fan noise; Blu-ray movie playback works with 3870.

Is there a better fan/heatsink for 3870? I just replaced my stock 7300GT with 3870 but fan noise is annoying and is louder than my Mac Pro system fans. Thanks.
I just like to share to everybody that 3870 works with Buffalo external USB Blu-ray(tested with Vista). My stock 7300GT will not playback Blu-ray movies because it's not HDCP compliant.
Nathan

I just removed the fan off my x1900 and it's a joy to listen to now. Dead silent.
Here are some photos of how easy it was. Take off memory heat syncs, take off electric heat syncs, and then the fan off the chip. Wipe it with a tissue. Then take an eraser and rub until all residue is gone. Then just stick and peel the heat syncs where they fit.
The only trick was getting the clips to fit on the board. I had to take off the long metal piece that ran the length of the board so the clips could fit around it.
Anyway hope this helps someone out there.
http://www.redvent.com/images/card/1.jpg
http://www.redvent.com/images/card/2.jpg
http://www.redvent.com/images/card/3.jpg
http://www.redvent.com/images/card/4.jpg
http://www.redvent.com/images/card/5.jpg

How to get Flash Player 10.1 r53 to work with Mac OS X 10.6.4.

I have the latest version of Flash Player on my Mac OS X 10.6.4 Snow Leopard computer but I can't get videos to play. I've read in Adobe comments that Flash Player 10.1 is not working on 64-bit systems (which is mine). How can I get a version of Flash Player that WILL work on my Mac?? When I try to play a video from youtube.com it says I need to upgrade my Flash Player and to get it from Adobe (which I did but the 10.1 version doesn't work!!! I'd appreciate any help I can get from anyone who can provide a solution. Thank you. Dave McCanna

The Flash Player forum is here
http://forums.adobe.com/community/webplayers/flash_player
You will also need to specify what browser and version you are using.
You will also need to give a little bit more info than just "does not work".

How to get the Personas Rotator add-on to work with new Firefox themes?

Before Firefox changed from personas to themes, the Personas Rotator add-on automatically switched personas at a set interval (ie. every 1 minute). I presently have Firefox 12.0 installed as well as the latest versions of both Personas Plus and Personas Rotator but the rotator does not work.
Before it was necessary to sign into My Favorites for the add-on to rotate my favorite personas, but now when I sign in, there is no rotation. Only one persona/theme that is enabled stays on the screen. There is no automatic rotation.
Private browsing mode is not selected. How can I get Personas Rotator to work again? Thank you.

Good news! The Personas Rotator is now working again and switching personas automatically at 1 minute intervals.
It began working again after I went to the 'Appearance' tab under 'Add-ons' and removed all the personas listed there (these are ones I 'Added to Firefox' from My Favorites list which is accessed after signing in to the gallery).
But now I see that the personas that are presently being rotated are appearing in the 'Appearance' tab as well. I wonder if it will be necessary to 'remove' all these later to have them rotate again. Will post an update later for anyone having this same problem.

How to get Point Grey Dragonfly firewire cameras to work with LabVIEW 2010

We recently got a new computer. The O.S. is Windows 7, 64-bit. It has LabVIEW 2010 (also 64-bit) and the Vision Development Module, as well as the Vision Acquisition Driver. We also have Point Grey Dragonfly Express cameras. The first trial of using LabVIEW to get images from one of the cameras yielded greyscale images (they are color cameras). We then installed the Point Grey drivers (flycapture2.1.3.4_x64). After installing the drivers, the camera was is no longer recognized in MAX. Does anyone have pointers or advice? Thanks.

It's been a bit since I've messed with camera settings. But I think LabVIEW requires the NI-IMAQdx driver and the greyscale was from not setting the bayer filter. I can't poke around my camera settings right now, so I can't double check.

Anyone know how to get the Nik Collection of plugins to work with PSCC?

As above..

Info from Nik:
From Nik:
On a Windows:
1. Make sure all versions of Photoshop are closed.
2. Run the Nik Collection installer from the file you received via email and downloaded. If you no longer have this file, you may email customer support ([email protected]) to have the file sent to you again.
3. During the installation process when you get to the Host Application window, you will notice a plus sign to add an install location. Click that button and navigate to C:\Program Files\Adobe\Photoshop CC\Plug-Ins\.
4. Complete the installation, then open Photoshop CC to ensure that the plug-ins have successfully been installed.
On a Macintosh:
1. Make sure all versions of Photoshop are closed.
2. Run the Nik Collection installer from the file you received via email and downloaded. If you no longer have this file, you may email customer support ([email protected]) to have the file sent to you again.
3. During the installation process when you get to the Host Application window, you will notice a plus sign to add an install location. Click that button and navigate to Mac HD|Applications|Adobe Photoshop CC|Plug-Ins and paste the Google folder into this location.
4. Complete the installation, then open Photoshop CC to ensure that the plug-ins have successfully been installed.

How to get Windows 8.1 touch screen to work with my Creative Suite Cs5

Really want to know if there is a way to make Creative Suite Cs5 work on my Windows 8.1 touch screen device that does not have the wacom hardware

Skybreeze26 wrote:
Ya it does have to be supported by the software there should be an update so people that have purchased their programs can use it on touch screen instead of being forced into a monthly fee just to be able to work on the go. I refuse to pay a monthly fee for one of the five programs I already purchased just to use on a touch screen that is insane Its like paying for a program every year.
Well, considering bang for the buck, CS6 is about $700 USD to buy outright, which is fine but users have to be aware that Adobe's only going to put out critical updates for that version for the time being. No new features, etc. Even its Camera Raw doesn't have any of the new features inherent in Photoshop CC's Camera Raw.
Contrast this with paying about $120 USD/year (about $10 USD/month if one chooses to go that route) for Photoshop CC, Lightroom and any and all updates and new features to those programs via the Creative Cloud Photography Plan. By the time you've paid the equivalent that you would just for CS6, you'd have updates and new features that are leaps and bounds ahead of CS6. (CC itself has gone though several major updates that contain new features.) IMHO, there's no contest.

Final Cut Pro X witch Blu-ray Burner are you using ...

Using a Mac Pro Tower like the Mac Pro 2012 or similar what are the Blu-ray Internal Burners do you use ; LG or Pioneer , witch Model Number.
Creating Blu-ray on the Mac is fantastic but witch brand and model numbers for the Big Mac Pro Tower are you using with exellent results now.
On the Mac Apple Pro Apps or Roxio Toast Titanium are the only left options who are current and updated , but burners specified for Windows.
Frustration come when you talk to Apple they say not supported , Burners makers LG or Pioneer will say we dont offer support on the Mac.
Well if you can create Blu-ray on the Mac but cant get any help to burn it it is very frustrating and Not So Pro if Apple care for the Pro Users.

I use the new Mac Pro 2013. Final Cut Pro X version 10.1.4 and Maverick OS 10.9.5. An external Blu-ray burner LG BE14NU40. I've use single burn Blu-ray discs from brands like Maxell and Verbatim. That works fine. I have double layers Blu-ray discs not tried. I use it for home video’s.
DVD single works fine too. DVD double layers I have not tried but will also work i think. Reviews on LG USA stated that Roxio Titanium with corresponding plugin works.
I'm glad I found a blu-ray burner that works with FCPX. Compressor 4.1.3 but I have not been working with the LG burner. Not yet!

Blu ray burner options?

Hi Everyone,
I am looking to get an internal Blu Ray burner for my Mac Pro but sadly I realized that the internal connection is PATA. OWC offers a wide variety of Blu Ray burners but all the internal ones are SATA. Does anyone know if an adapter exists to make this work? Or should I give in and maybe go for an external FireWire 800 model?
I do have Windows XP SP2 installed via Bootcamp and whatever model I get would need to be recognized in both platforms. I'm just having some trouble understanding this high definition technology.
Suggestions? Please
Rio

Hi Malcolm,
Thanks for the link. Very useful info and solution. In the meantime I found an MCE Blu-ray burner but I'm not sure if it would be a better solution that the one you have provided. This one is quite expensive and I don't know this company's credibility. Here is the address:
http://www.mcetech.com/blu-ray/#osxcompat
I wonder if it would be a better investment to get the adapter you suggested and get a SATA Blu-ray burner which could, if needed be inserted into an enclosure if I wanted to use it externally with another computer in the future. Would the speed be affected by using it externally?
Rio

I have burned to my external blu ray burner 3 times, but twice ended up with glitches in the project. now it stops at 59% and won't finish sharing. How do I get it to finish sharing?

I have burned to my external blu ray burner 3 times, but twice ended up with glitches in the project. now it stops at 59% and won't finish sharing. How do I get it to finish sharing?

It's a complex project and there are a lot of possibilities. Among them is the length; there are a number of reports of projects that are approaching 2 hours failing to burn.
If it's a question of jarring Create Disk into action, one thing that has worked for some users is simply to click on and the Apply button (s) in the Settings pane of the Blu Ray Share window and then hitting Cancel. This can be tested by duplicating your project and selecting a tiny section of your sequence and exporting. Change the Output Device to Hard Drive and see whether Create Disk successfully writes a disk image.
You can also check that a specific clip isn't rendering properly. Since the process got to 59%, it may just mean that the burn couldn't be initiated by Create Disk – or it may indicate a problem with a clip toward end of your sequence. (If you can check the log, there may be something useful in there.)
Use the duplicated project and this time set a range for the last 30 minutes or so of the project and export it, using the Blu Ray destination. Again, set Output Device to HD and see whether it will complete.
Good luck.
Russ

How to burn full hd clips onto dvd-r with Blu-ray burner to playback on a set top Blu-ray player?

hello,
Blu-ray media is still expensive for exporting of small HD projects.
If i have a Blu-ray burner,
can i burn BD exports onto DVD-r's (4.7Gb)
and play them in a set top Blu-ray player?
aka: Does a DVD-r accept a 'blue laser'?
(Menus at this point are not necessary)
Mostly i am wanting to burn 3-4 minute music videos onto DVD-r discs
in full HD Blu-ray without having to use an expensive Blu-ray disc each time.
thanks
j

hello,
at this time the answer is yes
they are called BD5 and BD9 discs
the BD5 is a single layer DVD-r disc that holds BDMV
the BD9 is a dual layer DVD-r disc that holds BDMV
now i'm trying to see if Encore CS5 burns BD5/BD9 discs?
thanks,
j

DVD & Blu Ray Burner Drive Trays Do Not Stay Open When Media is in the Drive

I have a problem with both Windows 8/8.1 and the Windows 10 Technical Preview (there is no issue when I run Windows 7).
I have 2 optical drives: 1) DVD Burner and 2) Blu Ray Burner (I just got the second drive a few weeks ago). They are attached to the secondary SATA Chip (see below for specifics).
The problem I'm having is that when I eject media from either drive, the drive does not stay open, but rather immediately closes. Before I got the Blu Ray Burner, I had this problem with just the single DVD Burner by itself. I was hoping when I installed
Windows 10 Technical Preview that this problem would not be present, but it is present in that O/S as well.
This problem will repeat continuously if I attempt to use the eject button and so I either have to grab the disc while the tray is moving, or if I press the eject button again on the drive at the right time, I can get it to re-open and not close (this
is tricky to get the button timing right as it seems like it has to be done close to when the drive tray is fully extended when it starts retracting). It usually takes me 5 to 10 button presses to get it to stay open. Sometimes it will stay open for about
0.5 to 1s before it closes again, but most of the times it just immediately closes. I also have the same problem if I use the software eject feature by right clicking on the drive and choosing eject.
Of course, the expected behavior is that pressing the eject button should open the tray, but not close it immediately allowing you to remove the disc.
Here is some background information about my system and how the drives are connected:
1. Motherboard: Gigabyte GA-EP45-ED3P Revision 1.0 LGA 775
2. Interface (for both drives): Gigabyte SATA II Chip - 2 x SATA 3 GB/s connectors (GSATA2_0, GSATA2_1) supporting up to 2 SATA 3 GB/s devices
3. Memory: 8 GB (4 x 2 GB)
It should be noted that I tri-boot between Windows 7, 8/8.1, and 10 Technical Preview and that this issue is not present in Windows 7, but has always been there in Windows 8/8.1 and now it is present in 10TP as well.
I've had this system for just over 6 years now and it is still going strong. It should be noted that I have both drives on the secondary SATA chip (as identified above), which is meant to be used with removable SATA devices.
Since the problem exhibits itself in both Windows 8/8.1 and 10TP, a reinstall of the O/S will have no affect on this problem and so this appears to be some other issue that is consistent between Windows 8/8.1 and 10TP.
I'd appreciate your support in looking at this issue - thanks!
Matt Caspermeyer
P.S. I also submitted this feedback through the Insider Program.
Matt

Hey Zagayer,
Thanks for using Apple Support Communities.
As you now have two optical drives in your Mac Pro, you need to be able to choose which drive to eject. That is built into the system. You just hold the Option key while tapping eject for the 2nd drive.
OS X Mountain Lion: Eject a disk
http://support.apple.com/kb/PH10613
If your computer has two optical drives, hold down Option-Media Eject or Option-F12 to eject a disc from the second drive.
Have a nice day,
Mario

Blu Ray burn problem

I'm trying to burn a blu-ray disk from a 5 minute FCP X video. Each time I try I get the following message:
The bit rate of the video file exceeded the maximum allowable.
How can I work around this?

robertjeffrey
What Blu-ray burner do you have? Is it recognized in the Device Manager under DVD/CD-ROM drives? Driver and Firmware up to date?
What burn software came with the Blu-ray burner? If it is part of the CyberLink family, can you use the PowerProducer of the series to burn to Blu-ray disc format on a Blu-ray disc using these Blu-ray discs that Premiere Elements burn dialog is labelling "Media Not Present"? I would like to see the results of that test if possible.
Just to get it out of the way (maybe helpful), let us flush the preferences...
Assuming your Premiere Elements 11 is on Windows 7 or 8 64 bit....
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
11
and in the 11 Folder is the Adobe Premiere Elements Prefs Folder that you delete. If that does not work, then delete the whole 11 Folder in which it exists.Make sure that you are working with Folder Options/Show Hidden Files, Folders, and Drives active so that you can see the path described.
If that does not work, a complete Deactivation from Help Menu/Deactivate followed by the usual Control Panel uninstalled followed by reinstall may be in order. I am hoping the results from a CyberLink PowerProducer burn to may give us some valuable information so that we do not have to resort to uninstall/reinstall.
Are you using BD-R 25 GB 2X? What is this BD-R DL? Is that the 50 GB for Blu-ray? Do you have any BD-RE 25 GB 6X? How much are you planning on putting on this Blu-ray disc in terms of Space Required and duration?
Let us start here and then we can decide what next.
Thanks.
ATR

How to get lg BE14NU40 blue ray burner to work with fcp or compressor

Similar Messages

Maybe you are looking for