How to get libraries to deploy automatically

I have successfully integrated Crystal Enterprise with my uix, bc4j application.
There is a set of libraries, jar files that I added to the additional classpaths section in JDeveloper.
However, when I deploy the application to 9iAS, these libraries do not deploy along with the application. I have to add them manually to the application in 9iAS.
Does anyone know how to setup JDeveloper so that these libraries will deploy automatically?
Thanks, Steve

Nguyen Hung Linh
As I mentioned, the Crystal Reports libraries do get included in the EAR file from JDeveloper. However, when I try to run the Crystal Report, it does not know where the libraries are located.
For Oracle Application Server 9i, I need to go to the additional libraries area and add their locations in manually.
This page can be found as follows:
1. log on to Application Server as the administrator.
2. in the system components section click on the OC4J instance that has the application that needs the library locations added.
3. on the next page, click on the application needing the library locations added.
4. Click on the "General" link towards the bottom of the page.
5. In the middle of the page, you will see the "Library Paths" section. Click on the "Add Another Row" button and type in the path from the root drive (like c:\...) including the jar file name.
An example from my environment is:
C:\Program Files\Common Files\Crystal Decisions\2.0\jars\Serialization.jarJust keep adding rows until you have all the needed library paths added in.
I hope this helps.
Steve

Similar Messages

How to get MP3 to pla automatically

I have minimal experience with action scripting. I was able
to script a play button and a stop button but I cant figure out how
to get the mp3 to play automatically.
Id like the mp3 to load when the page opens while retaining
the ability to operate the play and stop button oncce youre the swf
is playing.
Thanks for any help....

Sorry about the typo before load -> loadSound
To get music to play frame page to page when a new HTML file
is loaded is very straight forward with Frames, but if you want to
avoid them then you will have to store information about the
current position of the sound file and then read it back in on the
next page.
You can use SharedObjects (do a search in Help for
sharedobjects) for this but remember that your sound will stop and
then start as the HTML pages unload and then load.
There is also a post on this forum by RFsantos who is trying
to do the samething. You might try seeing if he got the
SharedObjects to work.
Tim

How works Get Property Value / Type Automatic?

Hi,
I need to get in Labview some variables from Teststand. The VI I wrote use "Get Property Value" from Teststand and works fine... when I specify the type of variable I whant from Teststand (Boolean, I32,...).
But I need a VI which retrieve the value of my variable independently of the variable type.
I tried to set the type option "Automatic" but the "Get Property Value" always give back an empty array of boolean....
How works the "Automatic" option by the "Get Property Value"?
Is there a possibility in Labview to get the type of a Teststand variable?
Cheers,
Risotto

Risotto,
the "automatic" feature is no feature but an entry made because of the
polymorphic design of the "get property value" VI. if you would change
the order of the VIs contained in the polymorphic VI, you would
retrieve other kind of values.
therefore never use the automatic setting of this VI. the
simplest way to solve such thing is to pass the data in variant and an
additional numeric value for identifying the type of the value.
Norbert B.
- NI Germany
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to get NB100-11R to automatically connect to WLan on logon

I've just bought a NB100-11R netbook.
First time I started it up, I went to the network admin panel to set up wifi access.
It had detected my wireless network, so I entered the WPA password and it connected just fine. I saved those settings as a network location.
Next time I started up I expected it would it remember those settings, and connect automatically, but I couldn't get web access.
Looking at the network admin, it sill had my network listed as the wireless connection, but I had to unlock the panel, reselect my location, and click the "apply location as the current configuration" button, before it would give me web access, I have to do this every time I restart, which is going to get irritating.
Is there any way to get to connect automatically when I start up?

Thanks for all your help gcogger. It took a while, and some help from someone on the launchpad forum, to sort out why I couldn't access Synaptic. Once that was sorted I tried following the instructions on the WICD website to install it through Synaptic, but kept running into problems. In the end I managed to find a link to a .deb installer, and that's done the trick. Network connection working perfectly now. Feels like Linux is a pretty steep learning curve, but I know a lot more now than I did when I got the NB100, so I'm making progress.

How to get list of deployed application on server programatically?

Hi,
I am trying to build an application which will display list application(WebDynpro , Portal) deployed on portal server. In EP 7.0 we can go to Content Admin -> WebDynpro page to get list of WebDynpro application. Par files can be found under portal runtime->browse deployment page.
In CE we have nice feature which shows both portal application and WebDynpro application in content Admin->portal content list.
I want to find list of applications programmatically, is there any way to achieve this? Are there any apis where I should take a look at.
Thanks,
Nitesh Shelar

Hi,
Thank you for your reply.
I tried using
String[] applications = WDServerState.getActualApplications();
I am getting following exception.
java.lang.UnsupportedOperationException: Not longer supported starting with NW07.
at com.sap.tc.webdynpro.serverimpl.core.admin.AbstractServerState.getActualApplications(AbstractServerState.java:133)
at com.sap.tc.webdynpro.services.sal.admin.api.WDServerState.getActualApplications(WDServerState.java:52)
Do you know Any other api which I can use?
Regards,
Nitesh Shelar

How can get rid of the automatic message in peoples email when they submit a form?

I keep getting this message automatically appearing in peoples email browser when they have filled out my form and click submit:
Form Returned: SS Premium Listing Upgrade Application[3].pdf
Instructions to add this form to a data set:
1. Double-click the attachment.
2. Acrobat will prompt you to select a data set.
I am happy to see this at my end, but don't want it to pop up in their email body copy before they send the email back to me. I created the form using Acrobat version 8.1.2. Everything else works fine. Any thoughts will be greatly appreciated.

I have the exact same question as Dave here. I see this is an old thread and hope this will revive it. I don't understand Jon's response, except to say that his assessment of what happened seems wrong. I have posted a livecycle form that I am asking people to fill out and "submit". When they hit "submit", an email is generated that is sent to me. For some folks the email with the data attachment is sent right to their outbox and it is sent to me next time they send email. They aren't likely to see the body copy with the "Instructions" and so the fact that this copy will make no sense them is mute. However, for some people it generates an email that immediately opens up with "Instructions" in the body. Of course the instructions are for me and will make no sense to the person filling out the form. They are confused by this body copy because they think it is for them, and I don't need it.
I'd really like to change this copy or delete it at least.
Any thoughts?
David

How to get 2 subforms to automatically expand together.

I have 2 subforms (vertical). One is a table with 5 rows the other subform is text field.
As my text field automatically expands, would like for the table subform to also expand.
Any help would be appreciated. I am new to designer livecycle and have been trying to work through this with no luck.

Hi,
I think you will need to nest your table and subform with text field in a table of two columns (with no headers or footers). Then you can use something like the following JavaScript in the layout:ready event of the text field.
Table2.minH = xfa.layout.h(TextField1, "mm") + "mm";
Regards
Bruce

Table - How to get even column widths automatically

Hi all:
For example, a nested one-row, seven-cell table for a nav
bar.
Do I have to do a CSS rule?
Ever grateful !

Just use CSS to 'prop' the cells open with a width.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ken Binney" <[email protected]> wrote
in message
news:f2t38g$s7j$[email protected]..
> As posted above - equal cell width solution
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:f2t2v8$rt5$[email protected]..
>> For what?
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "Ken Binney"
<[email protected]> wrote in message
>> news:f2t1hr$qa9$[email protected]..
>>> Hi all:
>>>
>>> For example, a nested one-row, seven-cell table
for a nav bar.
>>> Do I have to do a CSS rule?
>>>
>>> Ever grateful !
>>>
>>
>>
>
>

How can I get Firefox to open automatically each time I turn on computer?

How to get Firefox to open automatically each time I turn on computer.

You can place a shortcut to the Firefox program in the Startup folder in "Start > Programs" by dragging the Firefox shortcut from the desktop or by dragging the Firefox entry in "Start > Programs > Mozilla Firefox" to that folder (or use Copy/Paste to achieve this).

How to get GMT?

HI:
How to get the GMT time automatically? Thanks!

You will need to Change time by adding the Hours offset from GMT...
try this function..
private String GetTimeGMT()
     java.util.Date RVdate;
     String strGMTDate = "";
     try
          String DATE_FORMAT = "MM/dd/yyyy HH:mm:ss";
          java.text.SimpleDateFormat sdf = new java.text.SimpleDateFormat(DATE_FORMAT);
          RVdate = sdf.parse(UserTime);
          Calendar cal = Calendar.getInstance(TimeZone.getDefault());
          cal.setTime(RVdate);
          //--- Change time by adding the Hours offset from GMT...
          int HrOffset = cal.get(Calendar.ZONE_OFFSET)/3600000;
          cal.add(Calendar.HOUR, (-HrOffset));
          strGMTDate = sdf.format(cal.getTime());
     catch(java.text.ParseException e)
          System.out.println("err" + e.getMessage());
     return strGMTDate;
where UserTime is a String which contains the time in "MM/dd/yyyy HH:mm:ss"

How to get the last version of flash in MSI format automatically?

How to get the last version of flash in MSI format automatically?
Roberto Neigenfind
Bravo Tecnologia
www.bravotecnologia.com.br

Hi Barbara,
Flash Professional CS5.5 is a 32-bit application which can be installed on computers with either 32-bit or 64-bit operating systems.
You can purchase this by Adobe's backward Licensing policy :
" Adobe allows program members to order a current-version license but use a prior version. These members can contact Adobe Customer Service to request a serial number for the earlier version if they do not already have one. Prior-version software is available via ESD and can be purchased through standard resellers. The program member must follow all guidelines of the current-version EULA. "
Please check the doc : http://www.adobe.com/volume-licensing/policies.html

How to get Manager id automatically when Employee Id is given.

How to get Manager id automatically when Employee Id is given.
1) I created a simple BO with two elements namely
1.Employee Id
2.Manager id
How to get employee's first name and last name?
And how will i get manager id automatic when i click employee id in element field.
Anbu.

Have you tried to use "APPS.FND_CONCURRENT" API?
http://etrm.oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=FND_CONCURRENT&c_owner=APPS&c_type=PACKAGE
http://etrm.oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=FND_CONCURRENT&c_owner=APPS&c_type=PACKAGE%20BODY
Thanks,
Hussein

How to get rid of automatically created server accounts in iCal and Mail?

I have recently setup an OS X 10.6.2 Server for our small office. I got the domain name wrong in the initial install and fixed this by doing a complete clean reinstall of OS X 10.6 server (then upgrade to 10.6.2).
The problem is that one of the OS X 10.6.2 clients had been setup to talk to the server prior to the rebuild. Now on this client, I cannot work out how to get rid of or change the automatically created server accounts in iCal and Mail - everytime you login, these are recreated using the old domain name (and of course don't work).
In Mail if you remove the server account (from Accounts in Preferences), it just pops back again. I even removed every trace of the old domain name from the apple.com.mail.plist file but when I re-open Mail that darned server account (with the old domain name) just pops up again.
In iCal its slightly different in that you can remove the account and it stays away while you have iCal open. But as soon as you close and re-open it, that server account just pops up again!
I thought it might be something to do with Kerberos and found a Kerberos file on the client which had the old domain name throughout it - I changed all these references to the new domain name, but still the same behaviour in Mail and iCal.
This is doing my head in. Any ideas?
Message was edited by: davidav

I suggest you ask in the snow leopard server forum
http://discussions.apple.com/category.jspa?categoryID=264

How do i get my iPhone to automatically delete and email that has been deleted on my macbook

How do I get my iPhone to automatically delete an email that was deleted on my macbook pro?

Set up your email account as IMAP on both devices.
~Lyssa

I downloaded the new Pages and Numbers through my app store but when I open my old documents, it still tells me my 30 day trial is over. How do I get the computer to automatically recognize the new applications?

More information: I have a 3 year old MacBook and had been using "Microsoft for Mac" until last week when I took my MacBook in for some upgrades- including the operating system Lion. I have been unable to use the Word, Excel, etc. programs because they are not supported on the new operating system... and I already used my 30 day trial of iWork when we first purchased the computer. I decided to buy Pages and Numbers through the App Store icon. When I open the Pages and Numbers under my Applications, I can get them to work. However, when I open old documents saved on my computer, they go into the 'old' iWork messages of that my trial has expired. How do I get the computer to automatically recognize that I've purchased Pages and Numbers?

You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.

How to get libraries to deploy automatically

Similar Messages

Maybe you are looking for