How to get line item net price and net value?

I have using "BAPI_SALESORDER_SIMULATE" to SIMULATE to create SO,
the return table
ORDER_ITEMS_OUT-NET_VALUE is not equals than created by VA01 .
how to get line item net price and net value?

Hi,
Can u elaborate ur query ?
By this FM you cannot create a SO . Use FM --> BAPI_SALESORDER_CREATEFROMDAT2
Regards,
MAdhukar Shetty

Similar Messages

How to get active document swatch color and its value

Hi
i want to get the swatch color of active document
i use 3 to 4 colors both cmyk and pantone which is in swatches
now i want to get their values using script
any one please help me
Thank you
Appu

Download the script "Render Swatch Legend" from the following site: http://www.wundes.com/JS4AI/
This script generates a legend of rectangles for every swatch in the main swatches palette. You should be able to grab the code you need from this.

To get line item and confirmation details from CRM_ORDER_READ

Hi,
Please can anybody let me know which the field from which i can get line item details and material for the service order given?
I am using CRM_ORDER_READ to retrieve the values. In that i am exporting 4 fields - et_orderadm_h, et_orderadm_i, et_product_i, et_doc_flow. So from where to get line items and material id from these fields?
I will be very thankful if i get the answer of this question.

Hi,
The attribute NUMBER_INT of ET_ORDERADM_I contains the Item Number.
Hope this helps!
Regards,
Rohit

Line item document flow shows net value of the item

Line item document flow shows the value of the item with currency instead of the quantity.
Any inputs on how this is getting displayed instead of the quantity being displayed?
Additional information:
In this case, the line item is a third party item with item category TAS.
The document flow displays as follows..
*Document Date Qty/Value UoM/Cur*
*Standard order xxxx xxxxx 34 170,00 USD*

Dear Anand
Go to VA02 or VF02, input the reference and execute. Again go to document flow screen. Now from top menu bar, click on "Document Flow --> View --> Items". Now check the document flow.
thanks
G. Lakshmipathi

FI drilldown reports- cant get Line item details in dynamic selection

Hi,
In FI drill down reports line item analysis, i create form in FDI4.I get document currency as a key figure.
While executing a report in tcode FDI0. i gave company code,dealer and currency as 'EUR' in dynamic selection,.
the correct output value '1245678.98' also displaying ,but i am not able to get line item details for the value '1245678.98'.
the path to get line items is Extras-->Line items.
it shows message as 'The value for characteristic Currency is not unique. Reposition the cursor'.
how to display line item details.
plz help.

Hi,
You can get this functionality with Virtual Key figures.
You will have the complete dataset in the RSR00002 Enhancement in CMOD.
Thank you
Arun

How to get po item condition type according schema group

hi experts,
i want to get po item condition type according schema group.
for example, in xk03, if the "schema group, vendor"in purchasing data view is set to 'Z3', in the purchase order which is made for this vendor, the po item's gross price condition type is hwxx.
if the "schema group, vendor" is set to 'Z2', the po item's gross price condition type is pbxx.
my question is : how to get po item condition type according schema group?
hunger for ur advice and thanks a lot!

several steps you need to go
1. you need to get the purcahsing group schema against your purchasing group from table T024E.
2. get the vendor group schema from vendor master data table LFxxxxxx
3. get the pricing schema from table TMKS via the selection criteria purchasing group schema and vendor group schema
4. go to the table T683S via inputing Usage, application and pricing determination procedure.
5. now you got it.

Urjent-how to add line items in tcode-FBL3N

Hi Experts,
How to add line items customer, customer name, vendor and vendor name in FBL3N.
Thanks in advance.
mahe
Moderator message - Please do not use words like "urjent". Please ask a specific question. Please search the forum. This question has been asked and answered before. Post locked
Edited by: Rob Burbank on Apr 29, 2009 11:27 AM
Edited by: Rob Burbank on Apr 29, 2009 11:28 AM

Hi,
Check the BTE's:
00001020     POST DOCUMENT:       Prior to final checks             SAMPLE_INTERFACE_00001020
00001025     POST DOCUMENT:       Final checks completed       SAMPLE_INTERFACE_00001025
00001030     POST DOCUMENT:       Posting of standard data     SAMPLE_INTERFACE_00001030
00001050     POST DOCUMENT:       Accounting interface           SAMPLE_INTERFACE_00001050
Thanks & Regards,
Harish

How to transfer Line Items

Hi
How to transfer Line Items from One GL account to another GL account.
We, at the time of changing Non Open Item Manged account to Open Item Manged account, how can we transfer Line items to make this GL account Zero, If suppose line items are more than 200.
Satish
Points assured.

If you are attempting to change the account from Non Open Item managed, you need to make the account balance zero. The change will be be effective only for future transactions. You need not transfer all line items, find the balance and make an entry to debit or credit to make it zero, to a temporary account. Later, once you have activated, you can reverse that transaction.
The OSS 606977 refered may be helpful if you are looking for reverse activation. i.e from Open to Non Open. Here is a brief:
Symptom
In the G/L account master record, you can activate/deactivate the 'Open item management' indicator if the balance of the account is zero. In this case, the system does not check whether postings exist on the account.
If postings exist, this could lead to problems, for example, if the clearing is reversed after the change to the indicator is made.
Other terms
FS00, FS02, FSS0, FS02, FH190, XOPVW
Reason and Prerequisites
The transactions for the maintenance of the G/L account master record did not check whether postings exist on the account. Now the program checks whether postings exist in the current year or previous two fiscal years.
Solution
Implement the attached correction or import the corresponding Support Package. Since it could make sense to change an account with balance zero from open item managed to non-open item managed (and vice versa) - despite postings to the account - the message is delivered as customizable (with error as a default setting).
The check is also carried out, when open-item management is activated, is postings exist on the account.
If you implement the note you must also carry out the following:
Use Transaction SE91 to create message 190 in message class FH with the following text:
Account balance = 0; however, postings exist on the account
Use Transaction SM30 to insert the following entry into view T100S:
Application area   FH
MsgNo              190
Allowed            EW
Standard          E
Afterwards, the message can be customized in View V_T100C. To do this, you can use Transaction OBA5.

How to get line in Line chart to go to edge / border of graph

Post Author: brutschm
CA Forum: Charts and Graphs
How to get line in Line chart to go to edge / border of graph?
I've seen this before but can't remember how to do it now. I'm using Crystal Reports XI
Thanks,
Brandon

Post Author: V361
CA Forum: Charts and Graphs
Not sure if this is what you are looking for.
Group X Axis setings, uncheck the Value axis crosses Between Groups.

How to get lines in between two fields in smartform

Dear Freinds,
               I have developed one smart form however iam not getting output correct could you please help me out, the problem iam getting is iam not able to get the following things
in The Main Window
         i have one header , one Main Area and one Footer Area
in the header i have created one %ROW1 and named as Row and again under the ROW i have
created a % Cell ...........again i want to create for the same Row iam not able to creeate another
Cell.........please let me know how i can have 5 or 6 cells for the same Row .
as i want the output as
UNit No. : 103              Quantity Req : 200   Date of Issue : 10/01/2008
Destination : Delhi         Amount       : 300    Rate/Per unit : 7
and secondly i have to have lines between the rows .... so please do let how to get lines in between rows as well..
i have tried allot but not able to get.
regds
madhuri

Hi Marcin Pciak ,
             Thank you very much for giving me the solution, one more point i require in this regard
i have requirement as below
IDNo                                      Invoice Amount
Despatch Date                      Despath Time.
Now i want i created Two Cell s (Cell A & Cell B) could you let me know how i can get IDNO and
Invoice Amount adjusacent to each other as above but right now iam getting in my smarform
IDNO
Invoice amount
but i want is IDNO--    Invoice Amount--
please help me this point
thanks once again for giving me answer.
regards
madhuri

How to default Line item display in GL master record???

Hi..Guys
How to default Line item display selection in GL master creation.....When we create GL master it will automatically get selected.
Is it possible to do.
Plz reply .

Hi
With sample account you can succeed your requirement
Give all the defualt fields whtatever you want then use this sample account while creating GL account
One more possibility is with SHD0 screen layout change with defaults (this thing i am not sure)
Reg
Vishnu

How to get work item details programatically ?

Hi All,
I have a list of work items (process instances) and I want to retrieve each item details such as: attachments, notes, id, ...
All the items are filtered and represented as Fuego.Papi.Instance:
Fuego.Papi.Instance[] inst = busProcess.getInstancesByFilter(filter : instFilter);
But the work item details are inherited from Fuego.Lib.ProcessInstance. So, how to get the item details from inst[] ?
Would appreciate any help, may be Dan will have an advise ?
Regards,
Kim

If you have instances returned by your filter, you could extract variable information for each instance by doing something like this:
for each inst in getInstancesByFilter(ps, filter : instF) do
    // here's how to get the value inside a primitive instance variable
    orderAmtObj as Object = getVar(inst, var : "orderAmount")
    // here's how to get the value of attributes inside a complex BPM Object instance variable
    //    - in this case this is an "order" object with two attributes (customerName and amount)
    orderObj as Object = (getVar(inst, var : "order"))
    xmlObject = Fuego.Xml.XMLObject(createXmlTextFor(DynamicXml, object : orderObj, topLevelTag : "xsi"))
    logMessage "The value of the order object's customer name is: " +
           selectString(xmlObject, xpath : "customerName")
    logMessage "The value of the order object's order amount is: " +
           selectNumber(xmlObject, xpath : "amount")
    // here's a rather uninspired way to retrieve who the participant is that was assigned the instance
    logMessage "The participant assigned to this instance is: " + inst.participantId
endInside the above "for" loop, you could retrieve these predefined variables (this example assumes you use "inst" in your "for" loop):
    objRet as Any
    objRet = inst.getVar(var : "PREDEFINE_ACTIVITY")
    logMessage "Activity name = " + objRet using severity = DEBUGSubstitute "PREDEFINE_ACTIVITY" in the above logic to get this information:
PREDEFINE_PRIORITY (priority)
PREDEFINE_ACTIVITY_DEADLINE (activity.deadline)
PREDEFINE_CREATION_TIME (creation.time)
PREDEFINE_PROCESS_DEADLINE (deadline)
PREDEFINE_DESCRIPTION (description)
PREDEFINE_PROCESS (process)
PREDEFINE_RECEIVED_TIME (receptionTime)
PREDEFINE_PARTICIPANT (participant)
PREDEFINE_COPY (id.copy)
PREDEFINE_STATUS (status)
Similarly, you might want to try to get instance information using the Fuego.Papi.VarDefinition object a try. Never used it, but the logic might be as simple as:
    logMessage "who created? = " + inst.getVar(Fuego.Papi.VarDefinition.CREATOR_ID) using severity = DEBUG
    logMessage "does it have attachments? = " + inst.getVar(Fuego.Papi.VarDefinition.HAS_ATTACHMENTS) using severity = DEBUG
    logMessage "does it have notes? = " + inst.getVar(Fuego.Papi.VarDefinition.hasnotes) using severity = DEBUGDan

How to get rid of 3rd party and others similar annoying adds????

How to get rid of 3rd party and others similar annoying adds????

If you have somehow acquired adware or malware, or maybe some add-ons to your browser
that can be seen in that part of your preference controls for the browser, you may be able to
follow instructions on adware removal to be sure that isn't the problem. You can also go into
the browser and be sure the add-ons don't load.
Some items such as Spigot, genieo, and others can be included in free download or other sites
where the content is spiced with badware; sometimes a click-to-download gets you some other
content instead of what you thought it was. There even are browser redirecting items that keep
you looking at some page you don't want; and if you click on stuff, you may get more badware.
•Adware Removal Guide:
http://www.thesafemac.com/arg/
•Adware Medic: (removal method)
http://www.adwaremedic.com/index.php
•Mac Malware Guide:
http://www.thesafemac.com/mmg/
Some may suggest also using a tool by the name Etrecheck, but this by itself does nothing if
you don't know what to do next, however it does give you a partial list of some potential items
that could be indicative of troublesome software or adware, stuff to also remove.
•About EtreCheck
http://www.etresoft.com/etrecheck_story
Hopefully this may be of help, and should be useful to understand &/or indentify issues.
Good luck & happy computing!

Vendor Line item with Opening and Closing Balances report regarding

Dear All,
I need a report for vendor line items with Opening and Closing balances.
Thanks in advance
Sateesh

Hi
Try S_ALR_87012082 - Vendor Balances in Local Currency
Regards
Sanil Bhandari

Hi, just need to know how to get my music, video, pictures and apps form my iPhone to my new laptop as the old computer, which I used before was stolen. I only have my phone left and if I try to conect it to my new laptop it's trying to delete everything.

Hi, just need to know how to get my music, video, pictures and apps form my iPhone to my new laptop as the old computer, which I used before was stolen. I only have my phone left and if I try to conect it to my new laptop it's trying to delete everything.

I have also noticed all my settings won't stay set, example....I removed the check mark from "third party cookies", the when I close Firefox and reopen the check mark is back, also my tool bar has screwed up....can't reset, been having trouble the up grade.

How to get line item net price and net value?

Similar Messages

Maybe you are looking for