How to get list of company codes with current period not opened?

Hi,
How to get list of company codes with current period not opened?
Is there any way we can check whether the current period is opened for all company codes.
If not how, can we generate a report which having information of period and company code. Also please tell me, which table will have info on posting periods and company codes.
Thanks
Vineeth Varghese

Hi,
The MM periods details can be viewed In Table MARV . On the selection screen you have the option of entering the company codes , current period, year current period etc. so make the required entries and you get the all details relevant to MM periods. Also it can be downloaded as a report.Thanks

Similar Messages

How to get vendor and company code based on logistic invoice document

how to get vendor and company code based on logistic invoice document in abap/4?

Hello Kumar
When you call BAPI_INCOMINGINVOICE_GETDETAIL using
INVOICENUMBER = <number of invoice>
FISCALYEAR = <fiscal year>
the returned HEADERDATA contains what you are looking for:
HEADERDATA-COMP_CODE
HEADERDATA-DIFF_INF
Regards
Uwe

How to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

how to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

You can use third party software True Last Logon 2.9.You can export the file in excel for report creation.You can use the trial version this will achieve what you are looking for.
True Last Logon displays the following Active Directory information:
--Users real name and logon name
--Detailed account status
--Last Logon Date & Time
--Last Logon Timestamp (Replicated value)
--Account Expiry Date & Time
--Enabled or Disabled Account
--Locked Accounts
--Password Expires
--Password Last Set Date & Time
--Logon Count
--Bad Password Count
--Expiry Date
--You can also query for any other attribute (Example: Description, telephone Number, custom attibutes etc)
Refer the below link for trial version:
http://www.dovestones.com/products/True_Last_Logon.asp
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Remove Company Code with all the Employees in it from r/3?

Hi i have a bit unusual requirement.
i want to know how can i Remove a Company Code with all its assigned Employees completely from a system(r/3) ?
can this be possible at all? if yes then please also mentions what can be the side effects of this action.

Jack,
You will have to follow reverse engineering....
As Sikandar Guru Mentioned.....identify all the PERNRs for mass deletion....
Secondly I believe, that you want to Delete the Company Code.....check with Finance Folks.......If they have no issues, you can delete the co. code with TCODE EC01... but this will not delete the Relationships to Personnel area...etc.
There may be custom Features, Reports or programs functioning based on Co. Code.......
So, in a way....its not feasible..neither wise to attempt deletion of Co. Code....
S_PHO_48000106 is the TCode for Mass Deletion.
Good Luck !!!
Kumarpal Jain.
Edited by: Kumarpal Jain on Oct 26, 2009 3:20 PM

Vendor list by company code wise with Acoount group..?

Dear all
Can anybody expalin me how to get a report on vendors list by company codes wise with account group...
1.List of vendors company codes wise
2.List of vendors company codes wise with account group wise.
Thanks
sap-mm

1.List of vendors company codes wise
SAP Easy accessSAP Menu-accounting-financial accounting-vendors-information system-reports for account payable accounting-master data-S_ALR_87012086-VENDOR LIST
2.List of vendors company codes wise with account group wise
MKVZ
Regards,
Indranil

How to get List Item attachments name without write any custom code or any database query?

Hi,
How to get List Items attachments name without write any custom code or any database query?

You can get it from Rest,
There are 2 options,
1) create a 'Result Source' which has a search query for that List which has attachments
- Use rest query to get the 'Filename' , it will have the attachment file name
For example, if the result source id is : 73e6b573-abf8-4407-9e5f-8a85a4a95159 , then the query will be
http://[site URL]/_api/search/query?querytext='*'&selectproperties='Title,Path,FileExtension,SecondaryFileExtension,Filename'&sourceid='73e6b573-abf8-4407-9e5f-8a85a4a95159'&startrow=0&rowLimit=100
You can refine the query, be giving proper 'querytext'
2) Use the List rest api
For example if your list guid is :38d524a1-e95c-439f-befd-9ede6ecd242e
You can get he attachments for 1st item using this
http://[Site URL]/_api/lists(guid'38d524a1-e95c-439f-befd-9ede6ecd242e')/items(1)/AttachmentFiles
get2pallav
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you.

How to get list of software installed in a system

How to get list of softwares installed in a system?. should i use registry to get information or control panel?
is there any package available for this? how should i start with/
thanks

How to get list of softwares installed in a system?.Using native code, if at all.
should i use registry to get information or control panel?Linux has neither.
is there any package available for this? how should i start with/ Learn the Windows API or Google for some native tool.

How to find out the company code given the customer number

I am new to SAP please help me out? How do you find out the answer.

Hi,
Goto T.Code SE11/Se16/SE16n.
Key in the table name as KNB1.
Enter your customer number.
Execute.
You will get your company code here.
Another way is Goto XD02/XD03.
Enter your customer number.On company code press F4.Enter the customer number and press Enter.A list of company code in which your customer presents will appear.
Regards,
Krishna.

How to get listed as a XMP partner?

Hi there
We have just released a major metadata/keywords update, to our Digital Asset Management solution, based on Adobes XMP format.
Does anybody know how to get listed on the XMP partner page: http://www.adobe.com/products/xmp/partners.html
Thanks,
Jesper
Filecamp.com

Hi Frank
Just wanted to make sure you got our company information:
Your full company name
Filecamp AG
A company representative (name, title)
Jesper Faurby, CEO, Filecamp AG
About the partner
Filecamp is a lightweight Digital Asset Management, Image Library, and Online Proofing solution. Filecamp provides a secure customer branded platform to organize, review, approve, and share digital assets. Subscribers are from all over the world - ranging from freelancers to large corporations, usually from within the creative/media industry.
The value of XMP technology
"Adobe's XMP technology enables Filecamp to read and write metadata for common file types. Our customers appreciate the embedded metadata which allows keywords and more, to "travel" along with the files across various products, vendors and platforms."
Logo
A 170x55 px version of the logo can be downloaded from here: https://files.filecamp.com/public/file/21xp-1cum8c4d
Many thanks for your help. Please let me know if you have any questions.
Ok?
Best regards
Jesper Faurby
www.filecamp.com
Media Asset Management, Image Library, Professional File Hosting & Online Proofing ... in one integrated, secure and cost-effective solution.

Company codes with different fiscal year variants in a controlling area

Hi all,
When I try to assign a company code with different fiscal year variant than controlling area I get error. It is ok so far.
However, after assigning company with same fsv to controlling area the system lets me to change company code's fsv in company code global settings and I can even save it.
So I wonder how it would be possible ? Why do I get just a warning instead of an error and save ?
Thanks and regards.
M.Yusuf Dogan

Hi Bulut,
There are 12 normal and 3 special periods in the fsv of the company code which i'm trying to assign. However, controlling area's fsv has 12 normal and 4 special periods. I get an error message "KT297".
Actually, my point is that if the company code's fsv is same with co's I can assign but the system lets me change cc's fsv after assignment.
M. Yusuf Dogan

How to get my Addon to work with the license key?

Hi,
Can someone tell me how to get the Addon to work with the license key?
I've follow the steps as stated in this thread:
[Re: SBO 2005 A - How do I get a Connection string from SAP B1.|Re: SBO 2005 A - How do I get a Connection string from SAP B1.]
1) i've registered a BASIS key and get a 'BASISXXXXXX" string
2) then i paste my BASIS key in "Solution" of Add-On Indentifier Generator and generate the Add-On Indentifier Code
3) then i paste the string to my source code
which is the "XXX" of the sample code in that thread.
static string AddonIdentifierString="XXX";
int lRetCode=0;
int errCode=0;
string errMsg= string.Empty;
string connectionStr ="";
link = new SAPbouiCOM.SboGuiApiClass();
connectionStr =Environment.GetCommandLineArgs().GetValue(1).ToString();
link.AddonIdentifier=AddonIdentifierString;
link.Connect(connectionStr);
oApp = link.GetApplication(-1);
vCompany = new SAPbobsCOM.CompanyClass();
string cookie = vCompany.GetContextCookie();
string conStr = oApp.Company.GetConnectionContext(cookie);
vCompany.SetSboLoginContext(conStr);
lRetCode = vCompany.Connect();
4) then i add my add-on using manager role at Add-on admin
5) then i can see my add-on there. it not suppose to be there since i've not installed any of my add-on license for my own add-on.
what steps did i miss? Can someone please advise? Thanks
ps : i'm coding in VB

Hi,
i think you have to change the license file attributing the number of licensing for your addon, then download it from https://websmp202.sap-ag.de/smb and then install it on SAP License manager, then I think you should give the license for your addon for individual users (example manager)
I hope it helps.
Best regards

How to get list name through javascript?

Hi,
I wrote javascript for getting list items but here I'm hard coded list name as "Projects"(my list name). How can I get list name automatically with out hard coding,
Appreciate if anyone help.
Thank you.
function DoLogicalDelete()
var clientContext = null;
var oList = null;
var oListItem = null;
// var lstItmIsDeleted = null;
var itmID = getQuerystring('ID');
clientContext = SP.ClientContext.get_current();
oList = clientContext.get_web().get_lists().getByTitle('Projects');
// var oListItemID = SP.ListOperation.Selection.getSelectedItems(clientContext);
oListItem = oList.getItemById(itmID); // getting ID
clientContext.load(oListItem,"Title", "IsDeleted"); // load items to oListItem
oListItem.set_item('IsDeleted', true);
oListItem.update();
clientContext.executeQueryAsync(Function.createDelegate(this, this.onQuerySucceeded),Function.createDelegate(this, this.onQueryFailed));

Not sure on which context you are executing the code. If you executing this from the list form and trying to get the current list, then you may need to get the list name from the breadcrumb/list title field. Refer to the following posts for more information
http://sharepoint.stackexchange.com/questions/39008/how-to-get-list-name-from-js-object-model-list-name-from-url-problem
http://itrob.be/sharepoint-get-all-lists-names-in-javascript-spservice-and-jquery/
--Cheers

How to get real value from selectOneChoice with javascript?

Hi,
How to get real value from selectOneChoice with javascript? The event.getNewValue() only gets me the index of the selected item, not the value/title.
JSF page:
<af:resource type="javascript">
function parseAddress(event)
alert("new value: " + event.getNewValue());
</af:resource>
<af:selectOneChoice label="Location:" value="" id="soc4">
<af:clientListener type="valueChange" method="parseAddress" />
<f:selectItems value="#{Person.locations}" id="si7"/>
</af:selectOneChoice>
HTML :
<option title="225 Broadway, New York, NY-10007" selected="" value="0">225 Broadway (Central Office)</option>
<option title="90 Mark St., New York, NY-10007" value="1">90 Mark St. (Central Office)</option>
Thanks a lot.

Something I was missing ,
You need to add valuePassThru="true" in your <af:selectOneChoice component. I have personally tested it and got the actual value in alert box. I hope this time you got the real solution. You can also test the following code by your end.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:form id="f1">
<af:panelBox text="PanelBox1" id="pb1">
<af:selectOneChoice label="Set Log Level" id="soc1"
value="#{SelectManagedBean.loggerDefault}"
valuePassThru="true">
<af:selectItem label="select one" value="First" id="s6"/>
<af:selectItem label="select two" value="Second" id="s56"/>
<af:clientListener method="setLogLevel" type="valueChange"/>
</af:selectOneChoice>
<af:resource type="javascript">
function setLogLevel(evt) {
var selectOneChoice = evt.getSource();
var logLevel = selectOneChoice.getSubmittedValue();
// var logLevelObject = AdfLogger.NONE;
alert("new value is : " + logLevel);
//alert(evt.getSelection);
//alert(logLevelObject);
evt.cancel();
</af:resource>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

How to get list of docs for particulat billing type on plant wise

very urgent
is there any t-code, report to look thi
how to get list of billing docs grnerated for particulat billing type and if possible on plant wise also
very urgetnt
points to be rewarded
eagerly waitng from sap gurus

Dear chakri
As you may be aware, in VF05 you need to enter either Payer Code or Material Code and then based on the selection criteria, the report will generate. Please give the (ensure that this code is exist in billing document) Payer code and now select "Further sel.criteria" and DONT forget to enter the date in from column of "Billing docs.date". By default, there you can see one month date range.
Still if you get error message, please let me know the error message.
thanks
G. Lakshmipathi

How to get list of company codes with current period not opened?

Similar Messages

Maybe you are looking for