How to get Logic Pro Surround into FCP?

I've got an FCP project that is setup as DV NTSC 48kHz 16:9 anamorphic (basically linked Video/Audio - 2 tracks).
I have some surround tracks (mix of audio tracks and instrument tracks) that I've created in Logic Pro that is set at 96kHz 24bit.
If I bounce to PCM (AIFF) for all the tracks in Logic Pro how can I get these tracks into my FCP project that is using DV Video/Audio at 48kHz? I know I can import AIFF files into FCP but because the DV audio is 48kHz so I get all kinds of problems.
Tried to convert the FCP project to 96kHz 24bit audio and that resulted in all kinds of issues with timing and playback. I could not figure out how to split out the DV audio from the video (not sure I want to either).
Not sure best way to proceed? Should I send the FCP project to SoundTrack Pro and then in SoundTrack Pro import the AIFF created by Logic Pro? Once in SoundTrack Pro how to I get it ALL into FCP so I can render to a Movie and then use that in DVD Studio Pro?
Is there someway to convert the DV Audio to 96kHz and retain a synch'd link with the DV video?
Any tips on how to proceed is very welcome.
Thanks, Rob.

how to I get it ALL into FCP so I can
render to a Movie and then use that in DVD Studio
Pro?
Is there someway to convert the DV Audio to 96kHz and
retain a synch'd link with the DV video?
Rob,
What sample rate do you ultimately want on the DVD? Do you want Dolby 5.1?
Try burning your sequence to a single DV file. import the file into Logic Pro, bounce to a new 96k file. Check this new file against your video while still in Logic. Back in FCP, make a new sequence, set it to 96k, import the new audio, then import your 96k surround stems.
Although I'm still not sure what you're trying to accomplish with a 96k surround mix.

Similar Messages

How do I get a Soundscape (Logic Pro X) into FCP X?

I want to create a Soundscape to use in FCP X but I can't get the Soundscape to record anything to export.
This is because I am completely clueless on using Logic Pro X.
I have downloaded a YouTube tutorial based on Logic Pro 9 but this app seems to bear little or no relation to X and the tutorial is meaningless (to me).

Hi
"Soundscapes" are a new 'genre' of software instrument Patches in LPX
To the OP
You'll need to record or step enter some MIDI note events in Logic. When you are happy with the results you can Bounce (or Bounce replace) to get an audio file that you can import into FCP.
You might also be able to make use of the FCPX xml export function.

How to get Logic Pro to relocate plug in folders?

I have downloaded a plug in months ago.
(a folder that contains:
component file
vst bank file (.fxb)
a folder with all the samples/instrument files for importing individually instead of using the premade vst bank above
Months ago, I created a project using the plugin.
Today, I went through some folder organization, and moved the downloaded folder with everything in it to another location.
When I open the project, it says that blahblahblah is missing, and therefore the sound will not play from that instrument/plugin.
I tried something:
I left the downloaded folder in its original location. DOWNLOADS.
I opened the project and it did sound. The settings on the instrument are my main concern. So i saved those settings with the save as feature.
I moved the folder to desired location.
Then reopened the proejct which had the same error message. I opened the instrument FROM THE NEW LOCATION.
clicked my saved setting.
and this resulted in an error message saying that it couldnt find the files in its original location.
im guessing that the saved setting feature saves your settings and remembers/references the current location of the plug in/files being saved (their settings)
My problem:
I would like to move the folder of the instrument/plugin to a new location
while preserving the current settings of the insturment/plugin in said project.
How do I get logic to keep the current settings, and only relocate the plugin files????

There are certain things that you have to remember about the way that Logic works, as far as file structure goes - if you change the location of the audio files that are in the regions of a project, you will have to re-locate them (you can do that in the audio bin) to re-establish the file path - the EXS24 will actually look for samples and it might not do it very quickly if your Spotlight index hasn't been updated recently, which is another story.
You have to think about what you need to save into a project folder if you're gonna share it with somebody else, if you're working on a project like that, but otherwise Logic saves what you need for that particular project on your own computer, so that should be OK.
Well, for example, .component files should be placed in your computer's Audio folder, rather than the project file's folder (or your own Audio folder available to you with your log-in) to be available for all your projects, I'm not totally sure what you mean.

How to Get XDCAM Transfer files into FCP scratch disk locations

Hi
I'm new to XDCAM transfer. I have XDCAM Browser and Transfer, latest versions. I have successfully imported into FCP, but I was surprised to see the footage stored in a default 'Movies' location. I thought, okay, I'll just change the import location in the XDCAM Transfer preferences to the FCP scratch disk location but then I realized that since I have multiple scratch disk locations I would be defeating the way FCP works, which is to to automatically go to the location with the room for the files.
I didn't have this problem with Panasonic P2.
Is there a way to import XDCAM files into FCP and have it go to the scratch disk locations already established in FCP?
Thank you,
Phil

Hi Phil
Although XDCAM Transfer can be launched from within FCP (using the File > Import > Sony XDCAM.. command) the app itself is standalone and works outside of the control of FCP. It has no means of discovering and using the Capture Scratch location defined within FCP (because Apple do not provide any means for a third party app to do so).
The Panasonic P2 format is (can be) transfered directly using FCP's own Log and Transfer interface and so works wholly within FCP hence the target directory for imports honors the defined Capture Scratch location.
If you are working with the XDCAM EX series of camera's then you can use Sony's FCP Log and Transfer plugin (PDZK - LT1) instead of XDCAM Transfer to import your clips, and so achieve the functionality you are looking for. Although you lose some of the flexibility/functionality of the standalone XDCAM Transfer app (PDZK-P1) the benefit of handling everything directly with FCP's own interface might be preferable for you.
Hope it helps
Andy

I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

If you bought the boxed set of Logic Studio 2.0 which includes LP9, then you cannot download it. You must use the disks that came as part of the boxed set... to install from.
If you bought the App Store version of Logic Pro 9 then go to the Mac App Store App, Sign into the Store using the same Apple ID you used to purchase LP originally, look under the Purchase Tab and you shouldl find LP9 ready and waiting for you to download and install.

How I can get Logic pro 7?

I have used Logic since the day it was "born" till version 5.5 (on Pc). Now I bought Logic pro 9 (& Mac...) and succeeded to load songs from version 5.5
but when I loaded songs from former version, I think 4.0, I have got a note says that I need version 7 to convert them.
What am I suppose to do?

Thanks, but the subject was "How can get get Logic pro 7?"
I mean can I get it from apple free as a logic 9 user? or there other way?

How can i get logic pro x on my n ew imac i have it on my macbook pro

how can i get logic pro x on my n ew imac i have it on macbook pro

What do you mean, it's not installing?
Give more details please... We cannot mind read or see your screen here

How do I get Logic Pro X to see my USB audio interface Steinberg UR22? It saw it once before but now it doesn't.

How do I get Logic Pro X to see my USB audio interface Steinberg UR22? It saw it once before but now it doesn't. In preferences it doesn't appear as an input device option. Help!

First, go to System Preferences for OS X and verify that the operating system can see it.

Does anyone know if apple's one-to-one program would be a good way to learn how to use logic pro or am I better off going to school to learn audio engineering or something?

Of course going to school would be a good option, but I want to know if one-to-one is also a good way to learn how to use logic pro. Has anyone been through the one-to-one program for logic pro and can say that they learned how to use logic pro well because of it?

For sure, one to one training, if given by a tutor who is capable, will hand you the means to build up self-confidence and will therefore let you operate the hard/software in an intelligent manner, instead of going for the trial and error method which has its pro's and con's too. Once you've passed this beginners phase you will make your own decisions intelligently and then you will also start to get experience and learn even from your mistakes. Something like that in theory and the rest is up to you!
Have a nice day

How to import premier xml file into FCP X?

Hi There,
Premier has an export to "Final Cut Pro XML" option but how do you import these files into FCP X?
If I navigate from within FCP X, the file is greyed out and if I right click from the finder and open in FCP X I see the error:
The document “V1-0008_M07-1538.mov.xml” could not be opened. Final Cut Pro cannot open files in the “XML text” format.
I'm using FCP 10.1.1 and Premiere Pro CC 7.2.1
Any pointers in the right direction would be much appreciated.
Cheers

Looks like this is the only option: https://itunes.apple.com/us/app/7tox-for-final-cut-pro/id496926258?ls=1&mt=12

How to buy Logic Pro X via PayPal?

So, my question is simple... How to buy Logic Pro X via PayPal? I'm Serbia and it's only way for me to buy...
Thanks in advance...

Well... Of course that i've tryed that in a first place, but...
1. There is no iStore and App store in Serbia, so i've opened (like 200.000 thousend users from Serbia) account on our friendly country who used to bomb us in 1999. USA!!! Heheheh...
2. Of course, i've tried to connect my debit VISA card to my USA account but all the time i get the message that my VISA is invalid... Of course!!!
So, please, can you try to give me some more suggestions?
Thanks again...

How to get structure of IDOC into xi in the scenario is IDOC - XI - File

hi XI Guys,
When i want to Integrate SAP sys(IDOC) with File how to get structure of IDOC into XI, As we will define Data types in File -> XI -> File. Please send Step by Step process as i am new to Netweaver(XI)
ThankYou,
B.Pushparaju.

When i want to Integrate SAP sys(IDOC) with File how to get structure of IDOC into XI
>>>>
import the IDoc under the imported object in your SCV. Note that import should be allowed for the SCV.
As we will define Data types in File -> XI -> File.
>>>>
Ref. these blogs to help you out ..
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2

How to get a string "yyyyMMdd" into date like MM/dd/yyyy?.

Hi
How to get a string "yyyyMMdd" into date like MM/dd/yyyy?. i have used
SimpleDateFormat.parse but it is giving long value. i want to disply the date
like MM/dd/yyyy
thank you

Do you want the string rearranged or do you want to create an instance of some form of Date class?
If you want to rearrange the string you could just do it yourself provided you know the date string is going to be of the format yyyyMMdd.
something like this:
String newDate = origStr.charAt(4) + origStr.charAt(5) + "/" + origStr.charAt(6) + origStr.charAt(7) + "/" ...etc.

I wonder if i can get logic pro x in my MacBook Pro version 10.7.5 and if it's steel gone be fast? Tanks

I wonder if i can get logic pro x in my MacBook Pro version 10.7.5 and if it's steel gone be fast?
Tanks!!

Welcome to Apple Support Communities
Logic Pro X requires OS X 10.8.4 or newer, so if you want to use it, you will have to upgrade to Mountain Lion or Mavericks. See > http://www.apple.com/logic-pro/specs/
In case you want to do it, make a backup of your files with Time Machine and check that your apps are compatible > http://www.roaringapps.com

How to uninstall logic pro 9

How to uninstall logic pro 9? terminal scripts or is there an easier way?

Try using Amnesia.
http://www.macupdate.com/app/mac/30940/amnesia

How to get Logic Pro Surround into FCP?

Similar Messages

Maybe you are looking for